The Ore-forming Mechanism of the Jiajika Pegmatite-Type Rare Metal Deposit in Western Sichuan Province:Evidence from Isotope Dating

Granitic pegmatites are commonly thought to form by fractional crystallization or by liquid immiscibility of granitic magma; however, these proposals are based mainly on analyses of fluid and melt inclusions. Here, we use the Jiajika pegmatite deposit, the largest spodumene deposit in Asia, as a case study to investigate ore forming processes using isotope dating. Dating of a single granite sample from the Jiajika deposit using multiple methods gave a zircon U-Pb SHRIMP age of 208.4 ~ 3.9 Ma, an 4~Ar/39Ar age for muscovite of 182.9 ~ 1.7 Ma, and an 4~Ar/39Ar age for biotite of 169.9 ＋ 1.6 Ma. Based on these dating results and the 4~Ar/39Ar age of muscovite from the Jiajika pegmatite, a temperature-time cooling track for the Jiajika granite was constructed using closure temperatures of the different isotope systems. This track indicates that the granite cooled over ^-40 m. y., with segregation of the pegmatite fluid from the granitic magma at a temperature of ~700~C. This result suggests that the Jiajika pegmatite formed not by fractional crystallization, but by segregation of an immiscible liquid from the granitic magma. When compared with fractional crystallization, the relatively early timing of segregation of an immiscible liquid from a granitic magma can prevent the precipitation of ore-forming elements during crystallization, and suggests that liquid immiscibility could be an important ore-forming process for rare metal pegmatities. We also conclude that isotope dating is a method that can potentially be used to determine the dominant ore-forming processes that occurred during the formation of granite-related ore deposits, and suggest that this method can be employed to determine the formation history of the W-Sn ore deposits found elsewhere within the Nanling Metallogenic Belt.

A Super-Large Rb-Nb Rare Metal Deposit has been Discovered in Huashi Village of Xinglong County, Hebei Province

Objective The Huashi Village in Xinglong County of Hebei Province is located in the Yanshan subsidence zone in the central eastern North China Plate, which is 137 km away from Beijing City （Fig. la）. This area has undergone large -scale magmatic intrusion affected by the tectonic compression of the Pacific Plate in the Mesozoic （known as the Yanshanian movement） to form many alkaline rocks such as the Wulingshan rock mass. Previous studies have conducted petrological research and reconnaissance survey of rare metal ores in this area （Tian Shuzhang and Guo Zongshan, 1981; Xu Baoling et al., 1996）. In 2016, the Qinhuangdao Mineral and Hydrology Engineering Geological Brigade of Hebei Bureau of Geology and Mineral Resources Exploration implemented the project of Reconnaissance of Rare Metal Ores Including Rubidium in Huashi Village of Xinglong County, Hebei Province, and discovered super-large rare metal deposits of rubidium and biobium in the Madi alkali feldspar granite bodies in the Huashi Village to achieve great breakthrough of rare metal ore prospecting.

Laser metal deposition of refractory high-entropy alloys for high-throughput synthesis and structure-property characterization

Progress in materials development is often paced by the time required to produce and evaluate a large number of alloys with different chemical compositions.This applies especially to refractory high-entropy alloys(RHEAs),which are difficult to synthesize and process by conventional methods.To evaluate a possible way to accelerate the process,high-throughput laser metal deposition was used in this work to prepare a quinary RHEA,TiZrNbHfTa,as well as its quaternary and ternary subsystems by in-situ alloying of elemental powders.Compositionally graded variants of the quinary RHEA were also analyzed.Our results show that the influence of various parameters such as powder shape and purity,alloy composition,and especially the solidification range,on the processability,microstructure,porosity,and mechanical properties can be investigated rapidly.The strength of these alloys was mainly affected by the oxygen and nitrogen contents of the starting powders,while substitutional solid solution strengthening played a minor role.

Numerical simulation of thermal behavior during laser metal deposition shaping

Abstract: Based on the element life and death theory of finite element analysis(FEA), a three-dimensional multi-track and multi-layer model for laser metal deposition shaping(LMDS) was developed with ANSYS parametric design language(APDL), and detailed numerical simulations of temperature and thermal stress were conducted. Among those simulations, long-edge parallel reciprocating scanning method was introduced. The distribution regularities of temperature, temperature gradient, Von Mise’s effective stress, X-directional, Y-directional and Z-directional thermal stresses were studied. LMDS experiments were carried out with nickel-based superalloy using the same process parameters as those in simulation. The measured temperatures of molten pool are in accordance with the simulated results. The crack engendering and developing regularities of samples show good agreement with the simulation results.

Geology, Mineralization, Fluid Inclusion and Stable Isotope of the Early Cretaceous Sn and Associated Metal Deposits in the Southern Great Xing’an Range, NE China: A Review

The Southern Great Xing’an Range(SGXR) hosts a number of Early Cretaceous Sn and associated metal deposits, which can be divided into three principal types according to their geological characteristics: skarn type deposits, porphyry type deposits and hydrothermal vein type deposits. Fluid inclusion assemblages of different types of deposits are quite different, which represent the complexities of metallogenic process and formation mechanism. CH4 and CO2 have been detected in fluid inclusions from some of deposits, indicating that the ore-forming fluids are affected by materials of Permian strata. Hydrogen and oxygen isotope data from ore minerals and associated gangue minerals indicate that the initial ore fluids were dominated by magmatic waters, some of which had clearly exchanged oxygen with wall rocks during their passage through the strata. The narrow range for the δ34S values presumably reflects the corresponding uniformity of the ore forming fluids, and these δ34S values have been interpreted to reflect magmatic sources for the sulfur. The comparation between lead isotope ratios of ore minerals and different geological units’ also reveals that deeply seated magma has been a significant source of lead in the ores.

A novel method of utilizing static mixer to obtain mixing homogeneity of multi-species powders in laser metal deposition

Real-time mixing of multi-species powder challenges Laser Metal Deposition(LMD)of Functionally Graded Materials(FGMs).The current work proposes a novel method of using a static mixer to realize rapid,uniform multi-species powder mixing.Firstly,copper powder and 316L stainless steel powder are selected to complete the powder mixing observation experiment with Scanning Electron Microscope(SEM)and Energy Dispersive Spectrometer(EDS).Secondly,computational fluid dynamics and particle mixing simulation models are used to analyze the flow field and particle motion characteristics in the static mixer.Finally,LMD experiment and metallo-graphic observation are carried out with 316L stainless steel powder and WC powder to verify the feasibility of the static mixer.This study provides a theoretical and practical basis for powder mixing in laser processing with a static mixer.The conclusions can also be applied to other processing fields requiring real-time and uniform mixing of multi-species powders.

Microstructure and Size‑Dependent Mechanical Properties of Additively Manufactured 316L Stainless Steels Produced by Laser Metal Deposition

Metal additive manufacturing(AM),as a disruptive technology in the feld of fabricating metallic parts,has shown its ability to design component with macrostructural complexity.However,some of these functionally complex structures typically contain a wide range of feature sizes,namely,the characteristic length of elements in AM-produced components can vary from millimeter to meter-scale.The requisite for controlling performance covers nearly six orders of magnitude,from the microstructure to macro scale structure.Understanding the mechanical variation with the feature size is of critical importance for topology optimization engineers to make required design decisions.In this work,laser metal deposition(LMD)is adopted to manufacture 316L stainless steel(SS)samples.To evaluate the efect of defects and specimen size on mechanical properties of LMD-produced samples,fve rectangular sample sizes which ranged from non-standard miniature size to ASTM standard sub-sized samples were machined from the block.Tensile test reveals that the mechanical properties including yield strength(YS),ultimate tensile strength(UTS),and elongation to failure(εf)are almost the identical for samples with ASTM standard size.Whilst,relatively lower YS and UTS values,except forεf,are observed for samples with a miniature size compared with that of ASTM standard samples.Theεf values of LMD-produced 316L SS samples show a more complex trend with sample size,and are afected by three key infuencing factors,namely,slimness ratio,cluster of pores,and occupancy location of lack of fusion defects.In general,theεf values exhibit a decreasing trend with the increase of slimness ratio.Microstructure characterization reveals that the LMD-produced 316L samples exhibited a high stress status at low angle grain boundaries,whilst its location changed to high angle grain boundaries after plastic deformation.The grain size refnement and austenite-to-martensite phase transformation occurred during plastic deformation might be responsible for the very high YS and UTS attained in this study.The experimental works carried out in this study is expected to provide a guideline for evaluating the mechanical properties of LMD-produced parts with complex structure,where critical parameter such as a certain slimness ratio has to be considered.

Comparison of Vacuum Metal Deposition and 1,2-lndandione/Ninhydrin Reagent Method for the Development of Fingerprints on Renminbi

It is extremely difficult to develop fingerprints from the surface of currency.There are studies reporting that the high vacuum metal deposition(VMD)method can be used to detect fingerprints on certain types of currency notes.Both VMD and 1,2-indandione/ninhydrin techniques are employed to visualize latent fingermarks on porous surfaces,such as paper.The current study explores whether the VMD method or 1,2-indandione/ninhydrin reagent method is more effective in the development of fingerprints on remninbi(RMB).Uncirculated,circulated,and water-exposed RMB was utilized in this study,along with five donors who ranged in their age and potential to leave fingermarks.Samples were aged for a determined period(for uncirculated and circulated RMB,times were 1,3,5,10,and 35 days;for watei^exposed RMB,exposure time was 1 day)and then treated with VMD and 1,2-indandione/ninhydrin.The results suggested that the 1,2-indandione/ninhydrin reagent yielded a better effect for both circulated and uncirculated RMB.For the RMB exposed to water,VMD performed better and gave limited results in terms of fingerprint development,which could serve as a reference for actual forensic cases.

Annealing before gate metal deposition related noise performance in AlGaN/GaN HEMTs

For a further improvement of the noise performance in A1GaN/GaN HEMTs, reducing the relatively high gate leakage current is a key issue. In this paper, an experiment was carried out to demonstrate that one method during the device fabrication process can lower the noise. Two samples were treated differently after gate recess etching： one sample was annealed before metal deposition and the other sample was left as it is. From a comparison of their Ig-Vg characteristics, a conclusion could be drawn that the annealing can effectively reduce the gate leakage current. The etching plasma-induced damage removal or reduction after annealing is considered to be the main factor responsible for it. Evidence is given to prove that annealing can increase the Schottky barrier height. A noise model was used to verify that the annealing of the gate recess before the metal deposition is really effective to improve the noise performance of AIGaN/GaN HEMTs.

The Evolutionary History of Ore-forming Processes of Metallic Ore Deposits in Northern Guangxi

The northern Guangxi region is an important rare metal, rare earth metal and polymetallic metallogenic province. In the region there exist five metallogenic series and two metallogenic subseries, whose metallogenesis shows features of polycyclic spiral evolution throughout the geological history. As far as various cycles are concerned, mantle-derived ore substances were reduced while crust-derived ore substances increased from early to late timesfin the whole geological evolutionary history, mantle-derived substances decreased gradually while crust-derived ones increased. Meanwhile ore element associations became more and more varied. In terms of space, mineralization migrated from the old basement outwards, i.e. from west to east during the Precambrian, and from north to south during the Phanerozoic, and again from east to west during the Yanshanian.

A comparative study on microstructure,nanomechanical and corrosion behaviors of AlCoCuFeNi high entropy alloys fabricated by selective laser melting and laser metal deposition

The present study investigated the microstructure,nanomechanics,and corrosion behavior of AlCoCuFeNi high entropy alloys fabricated by selective laser melting(SLM)and laser metal deposition(LMD).The microstructure of SLM-processed specimens was mainly composed of columnar-grained BCC matrix(^90μm in width)and Cu-rich twinned FCC phase.The columnar grains grew epitaxially along the building direction and exhibited a strong{001}texture.In comparison,a coarse columnar-grained BCC matrix(^150μm in width)with a stronger<001>texture,rod-like B2 precipitates,and large core-shell structured FCC phases were formed in the LMD-processed specimens due to the higher heat accumulation effect.Consequently,the LMD-processed specimens showed a lower hardness,wear resistance,and corrosion resistance,but higher creep resistance and reduced Young's modulus than the SLM-processed specimens.Hot cracks occurred in both types of specimens,which could not be completely suppressed due to Cu segregation.

Microstructure and Mechanical Properties of B-Bearing Austenitic Stainless Steel Fabricated by Laser Metal Deposition In-Situ Alloying

In the field repair application of laser metal deposition(LMD),the kinds of powder materials that can be used are limited,while the equipment components are made of various materials.Hence many components have to be repaired with heterogeneous materials.However,it is difficult to match the mechanical properties between the repaired layer and the substrate due to the diff erent materials.Based on the high flexibility of raw materials and processes in LMD,an in-situ alloying method is proposed herein for tailoring the mechanical properties of LMDed alloy.Using diff erent mixing ratios of Fe314 and 316 L stainless steel powders as the control parameter,the microstructure and mechanical properties of B-bearing austenitic stainless steel fabricated by LMD in-situ alloying with diff erent proportions of Fe314 and 316 L particles were studied.With the increase in the concentration of 316 L steel,the volume fraction of the eutectic phase in deposited B-bearing austenitic stainless steel reduced,the size of the austenite dendrite increased,the yield strength and ultimate tensile strength decreased monotonically,while the elongation increased monotonically.Moreover,the fracture mode changed from quasi-cleavage fracture to ductile fracture.By adding 316 L powder,the yield strength,tensile strength,and elongation of deposited B-bearing austenitic stainless steel could be adjusted within the range of 712 MPa–257 MPa,1325 MPa–509 MPa,and 8.7%–59.3%,respectively.Therefore,this work provides a new method and idea for solving the performance matching problem of equipment components in the field repair.

Mechanical and microstructural characterization of additive manufactured Inconel 718 alloy by selective laser melting and laser metal deposition

The direct comparison of the microstructure and tensile properties of Inconel 718 fabricated by selective laser melting (SLM) or laser metal deposition (LMD) has been carried out. In the as-built state, LMD-fabricated specimens show lower tensile yield strength and fracture elongation than SLM-fabricated specimens due to the coarser solidification microstructure, including grains, cellular dendrites and Laves phases. This is mainly because the cooling rate of the LMD process is 2 to 3 orders lower than that of the SLM process. Upon the same heat treatment, both yield strengths of SLMand LMD-fabricated specimens are enhanced significantly. Notably, LMD-fabricated specimens exhibit simultaneous improvement in the strength and ductility, which is mainly attributed to the presence of small granular Laves phases and uniformly distributed nanoscale c00 strengthening phases. The results could serve as a guidance for selecting suitable postheat treatment routes for specific additive manufacturing process to attain excellent strength-ductility synergy.

Impact of Pulsed Laser Parameters and Scanning Pattern on the Properties of Thin-Walled Parts Manufactured Using Laser Metal Deposition

The quality of parts manufactured using laser metal deposition(LMD),similar to other additive manufacturing methods,is influenced by processing parameters.Such parameters determine geometric stability,favorable microstructures,and good mechanical properties.This study aimed to investigate the effects of pulsed laser parameters(duty cycle and pulse frequency)and scanning patterns(unidirectional and bidirectional patterns)on the properties of parts fabricated using LMD.Results show that the properties of the LMD-fabricated parts are obviously influenced by pulsed laser parameters and scanning patterns.Using the unidirectional scanning pattern in both pulsed laser parameters enhances the properties of the thin-walled parts prepared using LMD.An increase in duty cycle can improve geometric stability,increase grain size,and reduce microhardness.Furthermore,the geometric stability does not vary considerably with the use of different frequencies,but the microstructure of fabricated parts shows various grain sizes with different pulse frequencies.In addition,the microhardness increases as the frequency increases from 13.33 to 50 Hz.In general,the influence of the duty cycle on geometric properties is greater than that of frequency.Meanwhile,the impact of frequency on microhardness is greater than that of the duty cycle.

Numerical study of thermal history in laser aided direct metal deposition process

Temperature evolution in the laser aided direct metal deposition (LADMD) process has considerable influence on the micro-structure and properties of the final part. A 3D transient finite element model was developed to study the temperature evolution during the multilayer LADMD process. To make the property analysis from thermal history easier, a critical temperature specific to thermal history was defined and the distribution of it in the part was also discussed. The simulation results indicated that the critical temperature can make the property analysis from thermal history easier. Thermal history of all the deposited materials was similar. It was also concluded that process parameters needed to be time-varying according to the real-time temperature field during the process.

Fluid Inclusion Geochemistry of Metallic Ore Deposits in the South- Central Sector of theDa Hinggan Mountains in China

Physicochemical parameters of mineralization such as temperature, pressure, salinity, density, composition and boiling of ore fluids as well as pH, Eh, fo2 and reducing parameter in theprocess of mineralization of major ore deposits in the study district have been obtained by the authors through systematic observation and determination of characteristics and phase changes of fluid inclusions at different temperatures and analysis of gaseous and liquid phase compositions of the inclusions, thus providing a scientific basis for the division of mineralization-alteration stages, types of mineral deposits and minerogenetic series and the deepening of the knowledge about the ore-forming processes and mechanisms of mineral deposits. It is indicated that the deposits of the same type have similar fluid inclusion geochemical features and physicochemical parameters though they belong to different minerogenetic series, while the compositions of inclusions are not conditioned by deposit types but closely related to the minerogenetic series of deposits.

Concentrations and chemical forms of potentially toxic metals in road-deposited sediments from different zones of Hangzhou, China

The 25 road-deposited sediments were collected from five different land-use zones （industrial, residential, commercial, park, and countryside） in Hangzhou, China. The concentrations of metals （Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, and Zn） in these samples were determined using ICP-AES after digestion with the mixture of HNO3-HF-HC1 （aqua regia）, and chemically fractionated according to the modified BCR （the European Community Bureau of Reference） sequential extraction procedure. The high metal concentration levels were detected in the sample from industrial zone and commercial zone having heavy traffic. While the low metal levels were noted in the street dust sample from residential zone, park, and countryside zone. The mobility sequence based on the sum of the BCR sequential extraction stages was： Zn （80.28%）, Pb （78.68%）, Cd （77.66%） 〉 Cu （73.34%） 〉 Mn （67.92%） 〉 Co （41.66%） 〉 Ni （30.36%） 〉 Cr （21.56%）, Fe （20.86%）. Correlation analysis and principal component analysis were applied to the data matrix to evaluate the analytical results and to identify the possible pollution sources of metals. Factor analysis showed that these areas were mainly contaminated by three sources, namely lithology, traffic, and industry.

Effect of Al in Ti－microalloyed Mn－Ni－Mo welding wire on microstructure and toughness of deposited metal

The effect of Al in Ti-microalloyed welding wire on microstructure and toughness of deposited metals is studied.The results show that the deposited metal toughness worsens with increasing Al in wire' The mechanism of Al is as follows:(1) Al makes oxygen content in deposited metal increase.(2)Al restrains the formation of Ti-rich oxide inclusion, which causes granular bainite microstructure in deposited metal.(3)The content of solute Ti in deposited metal increases with Al content in welding wire,as a result,a part of carbonrich constitution in deposited metal is in the form of twin martensite.

Effects of rare earth elements on sulphur and phosphorus impurities in deposited metal

In order to reduce sulphur （ S ） and phosphorus （ P ） impurities in deposited metal, a small amount of rare earth （RE） lanthanum （ La） and yttrium （Y） were added into the coating ofE4303 electrode, a low carbon steel electrode. The microstructures of deposited metal were analyzed with metalloscope, and then the content of S and P was examined by energy dispenive X-ray spectrometer （ EDXS ）, and by wavelength dispersive X-ray fluorescence （XRF） spectrometer for further examination. The results show that the proper addition of La and Y can be beneficial to the desulfurization and dephosphorization of the deposited metal. Certainly, difference in the addition amount of La and Y could lead to various desulfurization and dephosphorization efficiency, in which the former is more obvious than the latter. With the proper amount of La attd Y, there is finer microstructure in deposited metal, and mechanical properties are improved as well. The S content in deposited metal with added La and Y decreases by 44. 44 wt. % , while the P content 6. 67 wt. %, compared with that in deposited metal without La and II.