Metallurgical performance evaluation of space-weathered Chang’e-5 lunar soil

Space metallurgy is an interdisciplinary field that combines planetary space science and metallurgical engineering.It involves systematic and theoretical engineering technology for utilizing planetary resources in situ.However,space metallurgy on the Moon is challenging because the lunar surface has experienced space weathering due to the lack of atmosphere and magnetic field,making the mi-crostructure of lunar soil differ from that of minerals on the Earth.In this study,scanning electron microscopy and transmission electron microscopy analyses were performed on Chang’e-5 powder lunar soil samples.The microstructural characteristics of the lunar soil may drastically change its metallurgical performance.The main special structure of lunar soil minerals include the nanophase iron formed by the impact of micrometeorites,the amorphous layer caused by solar wind injection,and radiation tracks modified by high-energy particle rays inside mineral crystals.The nanophase iron presents a wide distribution,which may have a great impact on the electromagnetic prop-erties of lunar soil.Hydrogen ions injected by solar wind may promote the hydrogen reduction process.The widely distributed amorph-ous layer and impact glass can promote the melting and diffusion process of lunar soil.Therefore,although high-energy events on the lun-ar surface transform the lunar soil,they also increase the chemical activity of the lunar soil.This is a property that earth samples and tradi-tional simulated lunar soil lack.The application of space metallurgy requires comprehensive consideration of the unique physical and chemical properties of lunar soil.

Effect of lump ore ratio on the metallurgical properties of blast furnace charge

We conducted a series of experimental studies on the metallurgical properties of N-lump and F-lump ores used in Baosteel’s blast furnace, including thermal cracking, low-temperature reduction pulverization, reducibility, and droplet properties.The results show that the thermal burst properties of N-lump ore are better than those of F-lump ore.The low-temperature reduction degradation index(RDI) pulverization of the charge is the best when the ratios of N-lump ore and F-lump ore account for 35% each.The reduction performance of the charge is improved when F-lump and N-lump ores are mixed with sinter.In the softening-melting performance experiment, when the proportion of N-lump ore is 40%,the characteristic area value(S) as the charge permeability index is the smallest.When F-lump ore is mixed with sinter, its droplet performance improves compared with that of single F-lump ore.The proportion of F-lump ore should not exceed 15%.

Kinetics of iron removal from metallurgical grade silicon with pressure leaching

In this paper, the kinetics of pressure leaching for purification of metallurgical grade silicon with hydrochloric acid was investigated. The effects of particle size, temperature, total pressure, and concentration of hydrochloric acid on the kinetics and mechanism of iron removal were studied. It was found that the reaction kinetic model followed the shrinking core model, and the apparent activation energy of the leaching reaction was 46.908 kJ/mol. And the apparent reaction order of iron removal with pressure leaching was 0.899. The kinetic equation was obtained and the mathematical model of iron removal from metallurgical grade silicon （MG-Si） was given as follows：The values calculated from the equation were consistent with the experimental results.

Effect of heavy metals on soil nematode communities in the vicinity of a metallurgical factory

The influence of Cu and Zn on soil nematode communities was examined along a pollution gradient with increasing distance from a metallurgical factory. Total and available heavy metal contents were used to study the effects of heavy metals on nematode abundance, trophic groups and ecological indices. The results demonstrated significant correlations between the number of total nematodes, bacterivores, plant-parasites and the total and available heavy metals. Bacterivores and plant-parasites were the dominant trophic groups. Significant differences in different sampling sites were found only in the number of bacterivores（P〈0.01）. The Shannon-Weaver diversity index（W）, trophic diversity index（TD）, evenness index（J＇） and dominance index（λ） were found to be sensitive to soil pH and C/N ratios. Significant correlations were found between the total nematodes （TNEM）, some genera （A crobeloides, Aphelenchoides, Cephalobus, Ditylenchus, Mesorhabditis, Tetylenchus and Tylenchus） and distance from the factory.

Hydrometallurgical purification of metallurgical grade silicon

The effects of the particle size of ground metallurgical grade silicon （MG-Si）, the sort of acids, and the type of stirring on the purified efficiency of MG-Si were investigated. It was found that a particle size less than 0.1 mm was most effective for acid leaching; the extraction yield of impurities was increased by 9% with HF leaching compared with HCl leaching and HNO3 leaching, and increased by 7% with ultrasonic stirring compared with mechanical stirring. The principle of hydrometallurgical purification of metallurgical grade silicon under ultrasonic fields was also discussed.

Reviews of Metallurgical Technology to Recovery Platinum Group Metals from Secondary Resource in China

China is extremely poor in mineral resources of Platinum Group Metals (PGMs), productive output of PGMs from mineral resource is 2.5 tons per year. At the same time, China is the biggest PGMs consumption country in the world, the mineral resource of PGMs is critical shortage, it shows the importance of recycling the secondary resource of PGMs. Sino-Platinum Metals Resource (Yimen) Co., Ltd. is the leader in recycling of PGMs from secondary resource, and has made outstanding contributions to China PGMs secondary resources recycling. This article elucidates the current situation of secondary resources recovery and development of metallurgical technology for PGMs.

Review on the study of metallurgical process engineering

After nearly one hundred years of research, metallurgy(metallurgical science and engineering) has gradually become a system with three levels of knowledge:(1) micro metallurgy at the atomic/molecular scale,(2) process metallurgy at the procedure/device, and(3) macrodynamic metallurgy at the full process/process group. Macro-dynamic metallurgy development must eliminate the concept of an "isolated system" and establish concepts of "flow," "process network," and "operating program" to study the "structure–function–efficiency" in the macrodynamic operation of metallurgical manufacturing processes. It means considering "flow" as the ontology and observing dynamic change by"flow" to solve the green and intelligent potential of metallurgical enterprises. Metallurgical process engineering is integrated metallurgy, toplevel designed metallurgy, macro-dynamic operated metallurgy, and engineering science level metallurgy. Metallurgical process engineering is a cross-level, comprehensive, and integrated study of the macro-dynamic operation of manufacturing processes. Metallurgical process engineering studies the physical nature and constitutive characteristics of the dynamic operation of steel manufacturing process, as well as the analysis-optimization of the set of procedure functions, coordination-optimization of the set of procedures' relations, and reconstruction-optimization of the set of procedures in the manufacturing process. The study establishes rules for the macro operation of the manufacturing process, as well as dynamic and precise objectives of engineering design and production operation.

Jet Behavior and Metallurgical Performance of Innovated Double-Parameter Oxygen Lance in BOF

A double-parameter oxygen lance used in a 300 t converter was designed to improve the metallurgical performance. A small-scale measurement of the jet behavior was done using a computer controlled scanning system. The experimental data on the velocity distribution at the jet centerline, the contour map of the jet velocity, the deviation of the jet centerline, and the velocity distribution of the axial section were compiled. According to the results of the small-scale measurement, the double-parameter lance was also employed for a BOF experiment. The metallurgy inde- xes show that the metallurgical performance was highly promoted by use of the double-parameter lance.

Effects of SiO_(2) on the preparation and metallurgical properties of acid oxidized pellets

The effects of SiO_(2) content on the preparation process and metallurgical properties of acid oxidized pellets, including compressive strength, reduction, and softening–melting behaviors, were systematically investigated.Mineralogical structures, elemental distribution, and pore size distribution were varied to analyze the mechanism of the effects.The results show that with an increase in SiO_(2) content from 3.51 wt%to 7.18 wt%, compressive strength decreases from 3150 N/pellet to 2100 N/pellet and reducibility decreases from 76.5% to 71.4%.The microstructure showed that pellets with high SiO_(2) content contained more magnetite in the mineralogical structures.Additionally, some liquid phases appeared, which hindered the continuous crystallization of hematite.Also, the softening–melting properties of the pellets clearly deteriorated as the SiO_(2) content increased.With increasing SiO_(2) content, the temperature range of the softening–melting zone decreased, and the maximum differential pressure and the comprehensive permeability index increased significantly.When acid oxidized pellets are used as the raw materials for blast furnace smelting, it should be combined with high basicity sinters to improve the softening–melting behaviors of the comprehensive charge.

Smart manufacturing of nonferrous metallurgical processes:Review and perspectives

The nonferrous metallurgical(NFM)industry is a cornerstone industry for a nation’s economy.With the development of artificial technologies and high requirements on environment protection,product quality,and production efficiency,the importance of applying smart manufacturing technologies to comprehensively percept production states and intelligently optimize process operations is becoming widely recognized by the industry.As a brief summary of the smart and optimal manufacturing of the NFM industry,this paper first reviews the research progress on some key facets of the operational optimization of NFM processes,including production and management,blending optimization,modeling,process monitoring,optimization,and control.Then,it illustrates the perspectives of smart and optimal manufacturing of the NFM industry.Finally,it discusses the major research directions and challenges of smart and optimal manufacturing for the NFM industry.This paper will lay a foundation for the realization of smart and optimal manufacturing in nonferrous metallurgy in the future.

Metallurgical modeling of microcrack repairment during welding nonferrous materials: non-equilibrium solidification behavior of weld pool (Ⅰ)

Metallurgical modeling of synergistic microcrack self-repairmen during welding single crystal and polycrystalline superalloys of high-temperature aerospace materials has been properly established. The idea of improvement of nickel-based superalloys weldability through non-equilibrium solidification behavior of backfill to self-repair arterial crack network is usefully proposed. Crystallographic control strategy of crack self-repairmen of fusion zone interdendritic solidification cracking and heat-affected zone （HAZ） intergranular liquation cracking is technically achievable, indicating that optimal niobium alloying beneficially refines weld microstructure, stabilizes the primary solidification path, increases the solidification temperature and concomitantly decreases the weld pool geometry. High-carbon grain boundary is more thermal stable and less contributes to incipient intergranular liquid film than that of low-carbon grain boundary. The theoretical predictions of cracking susceptibility are indirectly verified in a rather satisfactory manner. Additionally, the metallurgical modeling enhances predicative capabilities and thereby is readily applicable for other alloy systems.

Influence of shielding gas on the mechanical and metallurgical properties of DP-GMA-welded 5083-H321 aluminum alloy

In the present research, 6-mm-thick 5083-H321 aluminum alloy was joined by the double-pulsed gas metal arc welding （DP-GMAW） process. The objective was to investigate the influence of the shielding gas composition on the microstructure and properties of GMA welds. A macrostructural study indicated that the addition of nitrogen and oxygen to the argon shielding gas resulted in better weld penetration. Furthermore, the tensile strength and bending strength of the welds were improved when oxygen and nitrogen （at concentrations as high as approximately 0. 1vol%） were added to the shielding gas; however, these properties were adversely affected when the oxygen and nitrogen contents were increased further. This behavior was attributed to the formation of excessive brown and black oxide films on the bead surface, the formation of intermetallic compounds in the weld metal, and the formation of thicker oxide layers on the bead surface with increasing nitrogen and oxygen contents in the argon-based shielding gas. Analysis by energy-dispersive X-ray spectroscopy revealed that most of these compounds are nitrides or oxides.

Washing and Extraction of Metals from Contaminated Soil Constituents: Implications for Contaminated Simulated Soil and Metallurgical Wastes with Different Reagents

Leaching behaviour of heavy metals (HMs) from simulated soil (SS), prepared according to standard guidelines, as well as its constituents (quartz sand (QS), bentonite clay (BC), and peat moss (PM)) were investigated. The study focused on a batch process with the aim of comparing the leaching potentials and metals solubilisation of ethylene diamine tetraacetic acid (EDTA), ethylene diamine disuccinic acid (EDDS), acetylacetone (Hacac), citric acid (CA), and tartaric acid (TA) for sustainable metal extraction purposes after a maximum leaching time of 60 min. The HMs concentrations with which the constituents were spiked with was such that reflected a contaminated site. The recovery potentials of both the SS and its constituents were found to vary for single metal (SM) and multi-metal (MM) systems. EDTA was the most efficient (on average 31% and 33% for SM and MM) and TA the least efficient (on average of 2% and 3% for SM and MM) extractant. For Hacac, preferential recovery for Cu and Ni were significant when compared to the other metals, while, metal recovery by EDDS in SS was lower than could be expected. The leaching trend for the targeted metals was studied using conventional leaching models.

Study on metallurgical properties and pellet proportioning technology of stainless steel cold-rolling sludge

With a complicated composition, large rolling sludge has been a focal point concerning neither at home nor abroad have any technologies suitable for bulk utilization of stainless steel cold- production and serious damage to the environment, stainless steel cold- environmental protection for stainless steel enterprises. Up to now, come into being that are not only proper, safe and economical but also rolling sludge. Based on the characteristics of the stainless steel cold- rolling sludge, orthogonal experiments were carried out on pellet proportioning and high-temperature roasting, and major metallurgical properties of sludge pellets were also tested. As the results show, pellets with 30% addition of cold-rolling sludge are qualified regarding their compressive strength, chemical composition and major metallurgical properties. No adverse impact happens to the blast furnace operation when sludge pellets account for 10% of the blast furnace raw materials. Therefore, the technical route applied in this paper is proved simple, feasible and environmentally friendly for cold-rolling sludge treatment.

Natural Frequency and Main Vibration Mode Analysis of the Braking System of Metallurgical Crane

The safety brake system of metallurgy bridge crane is generally composed of two separated block brake, brake disc, and torsion shaft. The analysis of natural frequency and main vibration mode on this two-degree torsion vibration system is the basement to study the vibration model and vibration performance. In this work, we investigated natural frequency of the braking system of metallurgical crane with analytic method. This provides a systematic guidance towards a successful brake system design

Textural changes in metallurgical coke prepared with polyethylene

The effect of high-density polyethylene （HDPE） on the textural features of experimental coke was investigated using polar- ized-light optical microscopy and wavelet-based image analysis. Metallurgical coke samples were prepared in a laboratory-scale furnace with 2.5%, 5.0%, 7.5%, 10.0%, and 12.5% HDPE by mass, and one sample was prepared by 100% coal. The amounts and distribution of textures （isotropic, mosaic and banded） and por^s were obtained. The calculations reveal that the addition of HDPE results in a decrease of mosaic texture and an increase of isotropic texture. Ethylene formed from the decomposition of HDPE is considered as a probable reason for the texture modifications. The approach used in this study can be applied to indirect evaluation for the reactivity and strength of coke.

Future Resources for Eco-building Materials:I. Metallurgical Slag

In order to make an effectivily recycle use of iron and steel slags that are main industrial wastes generated in Chinese metallurgical industry, the current technologies for reprocessing and recycling these wastes into eco-building materials were reviewed, such as preparing cement-steel slag blended cement with steel slag after metal recovery, using the fine powder of blast furnace slag （BFS） for manufacturing slag cement and high performance concrete. A further research on using these available resources more efficiently were discussed.

Metallurgical Reaction Characteristic for the Combined Blowing Process of Top-Bottom Blown Oxygen and Bottom Blown Natural Gas

The experiment was carried out in a combined blowing converter.The natural gas was supplied as the cooling medium for the bottom lance.The blow- ing practice of medium P hot metal (0.30-0.85% [P]) indicated that with better stirring at the bottom of the converter and lower P_(CO),this steelmgking process was favorable to reduce the amount of [C] and [O] and increase the (P_2O_5)/[P]. The maximum rate of dephospborization might be high up to 0.0a5%/min and the P content in steel could be reduced to lower than 0.03% by single slag-forming operation.

Metallurgical analysis of multiple launch railgun materials

Railgun materials play an important role in electromagnetic launch,and its performance has great effect on the shot-efficiency and lifetime of the launcher.In this paper,the effect of shots number on the performance of multiple launch railgun material under high current conditions is studied by metallurgical analysis.The metallographys of kinds of rails'surface at various locations are observed,and the details of damage zones at different positions are analyzed.The results indicate that molten aluminum from the armature deposits on the rail surface to form a thin film.The deposited film becomes thicker and multi-layered with the increase of shots number.When the velocity is greater than 2 km /s,the gouge phenomenon always appears.The gouge volume of material is measured by 3D laser image and the qualitative observations of the damage are obtained.The evidences show that gouge phenomenon mainly causes by the kinetic energy of the armature and it is related to the shear strength of rail materials closely.By the addition of nano-sized ceramic powders,the shear strength of rail materials increases,the volume of gouge decreases during multiple launches.

The 4^(th) International Metallurgical Industries Exhibition

On the 22～27of September 1992 will hold the 4International Metallurgical Industries(including steel, iron and nonferrous metals) Exhibition in Chinese International Trade Center,Beijing. This Exhibition, started since 1986 firstly, holds once every two years. Chinese Ministry ofMetallurgy, China National Nonferrous Metals Industries Corporation (CNNMIC) andHongkong Hwajin Company, Ltd. have given a reception in regard to this Exhibition on 20ofSeptember 1991. On the reception the Vice-manager of Chinese Nonferrous Metals Import/Ex-