Theoretical investigations of population trapping phenomena in atomic four-color,three-step photoionization scheme

The four-color three-step selective photoionization process of atom is very important in laser isotope separation technology.The population trapping phenomena and their influences are studied theoretically in monochromatic and non-monochromatic laser fields based on the density matrix theory in this work.Time evolutions of the photoionization properties of the four-color,three-step process are given.The population trapping effects occur intensely in monochromatic excitation,while it gradually turns weak as the laser bandwidth increases.The effects of bandwidth,Rabi frequency,time delay,and frequency detuning on the population trapping effect are investigated in monochromatic and non-monochromatic laser fields.The effects of laser process parameters and atomic parameters on the effective selective photoionization are also discussed.The ionization probability and selectivity factors,as evaluation indexes,are difficult to improve synchronously by adjusting systematic parameters.Besides,the existence of metastable state may play a negative role when its population is low enough.

Interplay between temperature-dependent strengthening mechanisms and mechanical stability in high-performance austenitic stainless steels

The effects of deformation temperature on the transformation-induced plasticity(TRIP)-aided 304L,twinning-induced plasti-city(TWIP)-assisted 316L,and highly alloyed stable 904L austenitic stainless steels were compared for the first time to tune the mechan-ical properties,strengthening mechanisms,and strength-ductility synergy.For this purpose,the scanning electron microscopy(SEM),electron backscattered diffraction(EBSD),X-ray diffraction(XRD),tensile testing,work-hardening analysis,and thermodynamics calcu-lations were used.The induced plasticity effects led to a high temperature-dependency of work-hardening behavior in the 304L and 316L stainless steels.As the deformation temperature increased,the metastable 304L stainless steel showed the sequence of TRIP,TWIP,and weakening of the induced plasticity mechanism;while the disappearance of the TWIP effect in the 316L stainless steel was also observed.However,the solid-solution strengthening in the 904L superaustenitic stainless steel maintained the tensile properties over a wide temper-ature range,surpassing the performance of 304L and 316L stainless steels.In this regard,the dependency of the total elongation on the de-formation temperature was less pronounced for the 904L alloy due to the absence of additional plasticity mechanisms.These results re-vealed the importance of solid-solution strengthening and the associated high friction stress for superior mechanical behavior over a wide temperature range.

Temperature-jump tensile tests to induce optimized TRIP/TWIP effect in a metastable austenitic stainless steel

In the present work,plastic deformation mechanisms were initially tailored by adjusting the deformation temperature in the range of 0 to 200℃ in AISI 304L austenitic stainless steel,aiming to optimize the strength-ductility synergy.It was shown that the combined twinning-induced plasticity(TWIP)/transformation-induced plasticity(TRIP)effects and a wider strain range for the TRIP effect up to higher strains by adjusting the deformation temperature are good strategies to improve the strength-ductility synergy of this metastable stainless steel.In this regard,by consideration of the observed temperature-dependency of plastic deformation,the controlled sequence of TWIP and TRIP effects for archiving superior strength-ductility trade-off was intended by the pre-designed temperature jump tensile tests.Accordingly,the optimum tensile toughness of 846 MJ/m^(3) and total elongation to 133% were obtained by this strategy via exploiting the advantages of the TWIP effect at 100℃ and the TRIP effect at 25℃ at the later stages of the straining.Consequently,a deformation-temperature-transformation(DTT)diagram was developed for this metastable alloy.Moreover,based on work-hardening analysis,it was found that the main phenomenon constraining further improvement in the ductility and strengthening was the yielding of the deformation-induced α′-martensite.

In situ observation of the phase transformation kinetics of bismuth during shock release

A time-resolved x-ray diffraction technique is employed to monitor the structural transformation of laser-shocked bismuth.Results reveal a retarded transformation from the shock-induced Bi-Ⅴphase to a metastable Bi-Ⅳphase during the shock release,instead of the thermodynamically stable Bi-Ⅲphase.The emergence of the metastable Bi-Ⅳphase is understood by the competitive interplay between two transformation pathways towards the Bi-Ⅳand Bi-Ⅲ,respectively.The former is more rapid than the latter because the Bi-Ⅴto B-Ⅳtransformation is driven by interaction between the closest atoms while the Bi-Ⅴto B-Ⅲtransformation requires interaction between the second-closest atoms.The nucleation time for the Bi-Ⅴto Bi-Ⅳtransformation is determined to be 5.1±0.9 ns according to a classical nucleation model.This observation demonstrates the importance of the formation of the transient metastable phases,which can change the phase transformation pathway in a dynamic process.

Metastable face-centered cubic ruthenium-based binary alloy for efficient alkaline hydrogen oxidation electrocatalysis

Metastable nanostructured electrocatalyst with a completely different surface environment compared to conventional phase-based electrocatalyst often shows distinctive catalytic property.Although Ru-based electrocatalysts have been widely investigated toward hydrogen oxidation reaction(HOR)under alkaline electrolytes,these studies are mostly limited to conventional hexagonal-close-packed(hcp)phase,mainly arising from the lack of sufficient synthesis strategies.In this study,we report the precise synthesis of metastable binary RuW alloy with face-centered-cubic(fcc)phase.We find that the introduction of W can serve as fcc phase seeds and reduce the formation energy of metastable fcc-RuW alloy.Impressively,fcc-RuW exhibits remarkable alkaline HOR performance and stability with the activity of 0.67 mA cm_(Ru)^(-2)which is almost five and three times higher than that of hcp-Ru and commercial Pt/C,respectively,which is attributed to the optimized binding strength of adsorbed hydroxide intermediate derived from tailored electronic structure through W doping and phase engineering.Moreover,this strategy can also be applied to synthesize other metastable fcc-RuCr and fcc-RuMo alloys with enhanced HOR performances.

The second fusion of laser and aerospace-an inspiration for high energy lasers

Since the first laser was invented,the pursuit of high-energy lasers(HELs)has always been enthusiastic.The first revolution of HELs was pushed by the fusion of laser and aerospace in the 1960s,with the chemical rocket engines giving fresh impetus to the birth of gas flow and chemical lasers,which finally turned megawatt lasers from dream into reality.Nowadays,the development of HELs has entered the age of electricity as well as the rocket engines.The properties of current electric rocket engines are highly consistent with HELs’goals,including electrical driving,effective heat dissipation,little medium consumption and extremely light weight and size,which inspired a second fusion of laser and aerospace and motivated the exploration for potential HELs.As an exploratory attempt,a new configuration of diode pumped metastable rare gas laser was demonstrated,with the gain generator resembling an electric rocket-engine for improved power scaling ability.

Oneε-Ga_(2)O_(3)-based solar-blind Schottky photodetector emphasizing high photocurrent gain and photocurrent-intensity linearity

Theε-Ga_(2)O_(3) thin film was grown on sapphire substrate by using metalorganic chemical vapor deposition(MOCVD)method,and then was used to fabricate a deep-ultraviolet(DUV)photodetector(PD).Theε-Ga_(2)O_(3) thin film shown good crystal quality and decent surface morphology.Irradiated by a 254-nm DUV light,the photodetector displayed good optoelectronic performance and high wavelength selectivity,such as photoresponsivity(R)of 175.69 A/W,detectivity(D*)of 2.46×10^(15) Jones,external quantum efficiency(EQE)of 8.6×10^(4)%and good photocurrent-intensity linearity,suggesting decent DUV photosensing performance.At 5 V and under illumination with light intensity of 800μW/cm2,the photocurrent gain is as high as 859 owing to the recycling gain mechanism and delayed carrier recombination;and the photocurrent gain decreases as the incident light intensity increases because of the recombination of photogenerated carriers by the large photon flux.

Electron-impact ionization of W^(9+)and W^(10+)

Electron-impact single-ionization(EISI)cross sections for W^(q+)(q=9,10)ions have been calculated by using the level-to-level distorted-wave(LLDW)method with emphasis on the contribution of metastable states to the total ionization cross sections.Contributions from direct-ionization(DI)and excitation-autoionization(EA)processes are taken into account.The calculated cross sections include the contributions from both the ground configuration and the long-lived metastable states with lifetimes exceeding 10^(-6)s.Calculated cross sections are in good agreement with experimental measurements when the influence of metastable states on the total ionization cross section are well considered.

Lifetime measurement of the 3d^(9) ^(2)D_(3/2) metastable level in Mo^(15+)at an electron beam ion trap

An experimental measurement of the lifetime of 3d^(9) ^(2)D_(3/2) metastable level in Mo^(15+)is reported in this work.The Mo^(15+)ions are produced and trapped in an electron beam ion trap with a magnetic field of 0.65 T.The decay photons emitted from 3d^(9) ^(2)D_(3/2) level are subsequently recorded via a cooled photomultiplier tube.Through meticulous scrutiny of potential systematic uncertainties affecting the measurement outcomes,we have determined the lifetime of Mo^(15+)3d^(9)2D_(3/2)metastable level to be 2.83(22)ms.The experimental result provides a clear distinguishment from existing calculations based on various theoretical approaches.

Fluid simulation of the effect of a dielectric window with high temperature on plasma parameters in inductively coupled plasma

To maintain the high-density plasma source in inductively coupled plasma(ICP),very high radiofrequency power is often delivered to the antenna,which can heat the dielectric windows near the antenna to high temperature.This high temperature can modulate the plasma characteristics to a large degree.We thus study the effect of dielectric window temperature on plasma parameters in two different ICP structures based on COMSOL software.The distributions of various plasma species are examined at different dielectric window temperatures.The concentration of neutral gas is found to be largely modulated at high dielectric window temperature,which further affects the electron collision probability with neutrals and the electron temperature.However,the electron density profiles are barely affected by the dielectric window temperature,which is mainly concentrated at the center of the reactor due to the fixed power input and pressure.

Positive effects of PVP in MIC:Preparation and characterization of Al-Core heterojunction fibers

The core-shell metastable intermolecular composites(MIC)have attracted much attention in the past few years due to their unique properties.Here,the preparation of Al-Core heterojunction fibers using PVP as a template is proposed.The nano-Al was directly added to the precursor solution of cupric acetate monohydrate(CAM)/Polyvinylpyrrolidone(PVP),and the initial Al@CAM/PVP fibers were obtained via electrospinning.The core-shell MIC fibers are then obtained by calcining the initial fibers.The morphology,structure,and composition of Al-core MIC fibers were characterized,that the energetic fibers calcined at 300℃,350℃,and 400℃have a core-shell structure with shell compositions CuxO and PVP,CuxO and Cu O,respectively.The energy release characteristics of Al-core MIC were investigated,and preliminary ignition tests were performed using an ignition temperature measuring instrument and a pulsed laser.The energetic fibers calcined at 300℃exhibited unique properties.The decomposition of PVP in the shell layer promoted exotherm,and a low-temperature exothermic peak was shown at 372-458℃.Lower ignition temperatures and higher flame heights were observed in the combustion tests than calcination at 350℃and 400℃.An unexpected result was that PVP can play a positive role in Al/CuO nanothermites.Simultaneously,this preparation method provided an idea for the integrated preparation of core-shell Al-Core MIC fibers and tuning the properties of MIC.

Double Differential Cross-Section for the Ionization of Hydrogenic 2S Metastable State

Double differential cross-sections of first Born estimation for ionization of hydrogenic 2S state by electrons are assessed for various kinematics situations in the asymmetric coplanar geometry. A final state wave function of multiple scattering theory is followed in this study. The present outcomes are compared with those of hydrogenic ground state, 2P state and ground state experimental results. Obtained findings show a good qualitative agreement with existing results.

AgNi15 composite particles prepared by ultrasonic arc spray atomization method

Ultrasonic arc spray atomization (UASA) method was used to prepare high-melting-point, immiscible AgNi15 (mass fraction, %) composite particles. Sieving was used to determine the size distribution of the AgNi15 particles. The morphology, rapidly solidified structure and metastable solution expansion of the AgNi15 particles were analyzed by scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS), respectively. The results show that the AgNi15 composite particles are spherical and well-dispersed, and the mass fractions of the particles with diameters <74μm and <55 μm are 99.5% and 98%, respectively. The rapidly solidified structure of the AgNi15 particles consists of spherical nickel-richβ(Ni)-phase particles dispersed throughout a silver-richα(Ag)-phase matrix andα(Ag)-phase nanoparticles dispersed throughout largerβ(Ni)-phase particles. The silver and nickel in the AgNi15 particles form a reciprocally extended metastable solution, and the solid solubility of nickel in the silver matrix at room temperature is in the range of 0.16%?0.36% (mole fraction).

Temporally-Resolved Emission Spectroscopic Diagnostics of the Atmospheric Pressure Glow Discharge in Helium

Temporally-resolved spectroscopic diagnostics of dielectric barrier discharges （DBDs） in atmospheric-pressure helium was carried out to study the discharge mechanism. Using an intensified charge-coupled device （ICCD） and a grating spectrometer, we obtained the emission spectra of homogeneous discharges and presented them in 3D graphs. We also studied the time variation of typical emissions from He, 0 and first negative bands of N＋_2. The results showedthat the spectral lines do not develop synchronously as-N_2（B_2∑U＋x2∑＋G,0～0,λ=391.4nm）and N＋2（B2∑＋u→X2∑＋g,0～1,λ=427.8nm） appear earlier and last for a longer time than He（3_3S1→2_3P1,λ=706.5nm）and O （3_P→3_5S,λ=777.4nm） A certain number of He metastables produced in the initial stage of discharge. Even between adjacent pulses, the emissions from N＋2 can still keep certain intensities while those from He and 0 extinguish. Since long-lifetime Hemetastables are produced and exist in the discharging space, it is the Penning ionization thatkeeps the long decay of N＋ emissions.

Precipitation of metastable phases and its effect on electrical resistivity of Al-0.96Mg_2Si alloy during aging

The precipitation behavior and its influence on the electrical resistivity of the Al-0.96Mg2Si alloy during aging were investigated with in-situ resistivity measurement and transmission electron microscopy （TEM）. The precipitates of the peak aged alloy include both β＂ and if, but the amount ratio of β＂ to β＂ varies with the aging temperature and time increasing. The precipitates during aging at 175 ℃ are dominated by needle-like β＂ phases （including pre-β＂ phase）, the size of which increases with the time prolonging, but does not increase substantially after further aging. The evolution of electrical conductivity is directly related to such microstructural evolution. However, the hardness of the alloy stays at the peak value for a long term. When the alloy is aged at 195 ℃, the ratio of β＂ to β＇ becomes the main factor to influence relative resistivity （Ap） value. The higher the temperature is, the smaller the ratio is, and the faster the Ap value decreases. Moreover, the hardness peak drops with the decrease of the ratio. With the size and distribution parameters measured from TEM images, a semi-quantitative relationship between precipitates and the electrical resistivity was established.

Rapid solidification of Cu_(60)Co_(30)Cr_(10) alloy under different conditions

Metastable liquid phase separation and rapid solidification in a metastable miscibility gap were investigated on the Cu60Co30Cr10 alloy by using the electromagnetic levitation and splat-quenching.It is found that the alloy generally has a microstructure consisting of a（Co,Cr）-rich phase embedded in a Cu-rich matrix,and the morphology and size of the（Co,Cr）-rich phase vary drastically with cooling rate.During the electromagnetic levitation solidification processing the cooling rate is lower,resulting in an obvious coalescence tendency of the（Co,Cr）-rich spheroids.The（Co,Cr）-rich phase shows dendrites and coarse spheroids at lower cooling rates.In the splat quenched samples the（Co,Cr）-rich phase spheres were refined significantly and no dendrites were observed.This is probably due to the higher cooling rate,undercooling and interface tension.

miR-132 inhibits colorectal cancer invasion and metastasis via directly targeting ZEB2

AIM:To investigate the biological role and underlying mechanism of miR-132 in colorectal cancer(CRC)progression and invasion.METHODS:Quantitative RT-PCR analysis was used to examine the expression levels of miR-132 in five CRC cell lines(SW480,SW620,HCT116,HT29 and LoVo)and a normal colonic cell line NCM460,as well as in tumor tissues with or without metastases.The KaplanMeier method was used to analyze the prognostic significance of miR-132 in CRC patients.The biological effects of miR-132 were assessed in CRC cell lines using the transwell assay.Quantitative RT-PCR and western blot analyses were employed to evaluate the expression of miR-132 targets.The regulation of ZEB2 by miR-132was confirmed using the luciferase activity assay.RESULTS:miR-132 was significantly down-regulated in the CRC cell lines compared with the normal colonic cell line(P<0.05),as well as in the CRC tissues withdistant metastases compared with the tissues without metastases(10.52±4.69 vs 23.11±7.84)(P<0.001).Down-regulation of miR-132 was associated with tumor size(P=0.016),distant metastasis(P=0.002),and TNM stage(P=0.020)in CRC patients.Kaplan-Meier survival curve analysis indicated that patients with low expression of miR-132 tended to have worse diseasefree survival than patients with high expression of miR-132(P<0.001).Moreover,ectopic expression of miR-132 markedly inhibited cell invasion(P<0.05)and the epithelial-mesenchymal transition(EMT)in CRC cell lines.Further investigation revealed ZEB2,an EMT regulator,was a downstream target of miR-132.CONCLUSION:Our study indicated that miR-132 plays an important role in the invasion and metastasis of CRC.

GRAIN BOUNDARY REORGANIZATION IN INTERMETALLIC COMPOUNDS NiAl AND FeAl

Computer simulation of grain boundaries(GB) was carried out in Fe and ordered alloys NiAl and FeAl with B2 superlattice. In this work symmetrical tilt grain boundaries =5[100](012) and = 5[100](013) are studied. The atomic interaction has been described by Morse empirical central- force potentials.The atomic structure and energy of GB were investigated by means of construction of -surface using full atomic relaxation by method of molecular statics. It is shown that = 5 tilt GBs in Fe, Ni3Al and NiAl have several steady states. Comparison of our results with geometrical model of coincidence site lattice (CSL) was carried out. GBs in model CSL are unstable, the stabilization is achieved by additional displacement at some vector along the plane of defect.

Precipitation process and its effects on properties of aging Cu–Ni–Be alloy

The precipitation process of aged Cu-Ni-Be alloy was investigated by X-ray diffraction （XRD）, trans- mission electron microscopy （TEM）, and high-resolution transmission electron microscopy （HRTEM）. The tensile strength, yield strength, and electronic conductivity of this alloy after aging were also studied. The precipitation sequence of the C17510 alloy aged at 525 ℃ is supersat-urated solid solution→G.P zones→ γ″-γ′→ γ. This transformation can be achieved by the accumulation of Be-atom layers. The G.P zones are composed of disk-shaped monolayers of Be atoms, which are formed on （001） matrix planes. The intermediate γ″ precipitate is nucleated in the G.P zones. The γ″ and γ′ precipitates have the same orientation relationship with matrix, e.g., （110）p｜｜（100）M,[001]p｜｜[001]M. The tensile strength of specimen shows a maximum during the aging process and then continuously decreases if the specimen is over aged. The strengthening effect of γ′ phase precipitated in aging at 525 ℃ for 4 h is calculated to be 436 MPa according to the Orowan strengthening, which is quite consistent with the experimental data.

EXPLOITATION AND APPLICATIONS OF METASTABLE AUSTENITE MATRIX WEAR ALLOYS

Fe based cast alloys with double phases structure of m etastable austenite m atrix an d eutecticcarbide M7 C3 were provided with the excellent properties of high abrasion resistance andhigher i m pact toughness . An i m portant reason of high abrasion resistance is hard ness violentincreasing on the m atrix surface because of w ear easily induced m artensite transfor m ation . The exploitation and applications of m etastable austenite m atrix wear alloys of Fe C Cr Nisyste m and Fe C Cr Mn system were described in this paper . The excellent properties of thesealloys w ill be sufficiently indicated by authors’exa m ples . To exploit a class of these alloyswith high abrasion resistance and various im pact toughness for m eeting the requirem ent of dif ferent environ ment , the proble m of the structure design of metastable austenite m atrix wearalloy w as also described in this paper .