Methanol-to-olefins(MTO)is industrially applied to produce ethylene and propylene using methanol converted from coal,synthetic gas,and biomass.SAPO-34 zeolites,as the most efficient catalyst in MTO process,are subject...Methanol-to-olefins(MTO)is industrially applied to produce ethylene and propylene using methanol converted from coal,synthetic gas,and biomass.SAPO-34 zeolites,as the most efficient catalyst in MTO process,are subject to the rapid deactivation due to coke deposition.Recent work shows that steam regeneration can provide advantages such as low carbon dioxide emission and enhanced light olefins yield in MTO process,compared to that by air regeneration.A kinetic study on the steam regeneration of spent SAPO-34 catalyst has been carried out in this work.In doing so,we first investigated the effect of temperature on the regeneration performance by monitoring the crystal structure,acidity,residual coke properties and other structural parameters.The results show that with the increase of regeneration temperature,the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene,which are normally considered as active hydrocarbon pool species in MTO reaction.However,when the regeneration temperature is too high,nitrogen oxides can be found in the residual coke.Meanwhile,as the regeneration temperature increases,the quantity of residual coke reduces and the acidity,BET surface area and pore structure of the regenerated samples can be better recovered,resulting in prolonging catalyst lifetime.We have further derived the kinetics of steam regeneration,and obtained an activation energy of about 177.8 kJ·mol^(-1).Compared that with air regeneration,the activation energy of steam regeneration is higher,indicating that the steam regeneration process is more difficult to occur.展开更多
A kinetic model of MTO process over the SAPO-34 catalyst considering the effect of water and coke deposition has been proposed.The model takes into account three steps of the MTO reaction in which the products cover 5...A kinetic model of MTO process over the SAPO-34 catalyst considering the effect of water and coke deposition has been proposed.The model takes into account three steps of the MTO reaction in which the products cover 5 lumped components.The water in the feed not only reduces the concentration of methanol but also alleviates the deactivation of SAPO-34 catalyst.The kinetic parameters have been estimated by the least square method.It has been proved that the calculated values in the kinetic model are in good agreement with the experimental values.展开更多
An effective route to improve the catalytic performance of SAPO-34 in the methanol-to-olefin reaction by simple oxalic acid treatment was investigated. The samples were characterized by XRD, SEM, N2 adsorption-desorpt...An effective route to improve the catalytic performance of SAPO-34 in the methanol-to-olefin reaction by simple oxalic acid treatment was investigated. The samples were characterized by XRD, SEM, N2 adsorption-desorption, XRF, TG, 29Si MAS NMR and NH3-TPD techniques. The results indicated that the external surface acidity of SAPO-34 was finely tuned by oxalic acid treatment, and the selectivity to C2H4 on SAPO-34 and the catalyst lifetime in the methanol-to-olefin reaction were greatly improved.展开更多
甲醇制烯烃技术(DMTO,Dimethylether/Methanol to Olefin)是中科院大连化学物理研究所与中石化洛阳工程有限公司和新兴能源科技公司合作开发的具有自主知识产权的低碳烯烃生产新技术。2010年8月采用DMTO技术的世界上首套甲醇制烯烃工业...甲醇制烯烃技术(DMTO,Dimethylether/Methanol to Olefin)是中科院大连化学物理研究所与中石化洛阳工程有限公司和新兴能源科技公司合作开发的具有自主知识产权的低碳烯烃生产新技术。2010年8月采用DMTO技术的世界上首套甲醇制烯烃工业装置在神华包头投料开车成功;2013年2月宁波禾元的DMTO工业装置也投入运行。这两套装置的甲醇进料量均为1.80 Mt/a,烯烃产量为600 kt/a。本文对DMTO工艺机理、工程设计特点和投料运行进行了介绍。DMTO工业装置运行结果表明,DMTO专用催化剂具有非常好的活性、选择性及抗磨损性能;采用大型浅层密相流化床反应器可以发挥催化剂性能,保障反应床层恒温及提高运行可靠性。为了减少开工阶段喷燃烧油可能对催化剂带来的不利影响,两套工业装置的投料开车均采用首创的利用反应热来进行再生器和反应器升温的方法。DMTO工业装置稳定运行时甲醇转化率接近100%,双烯选择性达到80%。72 h标定结果显示,生产1 t烯烃所需要的甲醇原料约为2.97 t。展开更多
中试研究了好氧膨胀床(OEB)反应器处理甲醇制烯烃(MTO)废水的稳定运行过程,考察了COD去除效果、填料层膨胀情况、反应器压降、反应器排泥及其它运行情况。试验过程运行稳定,膨胀填料层负荷在0.5~1.4 kg COD/m^3/d,COD去除率一直稳定在80...中试研究了好氧膨胀床(OEB)反应器处理甲醇制烯烃(MTO)废水的稳定运行过程,考察了COD去除效果、填料层膨胀情况、反应器压降、反应器排泥及其它运行情况。试验过程运行稳定,膨胀填料层负荷在0.5~1.4 kg COD/m^3/d,COD去除率一直稳定在80%以上,DO比耗基本在1~3,而且废水浊度也可以得到明显去除。确认了自主开发的OEB反应器是稳定和有效的,值得进一步优化并推广使用。展开更多
基金the National Natural Science Foundation of China(91834302)。
文摘Methanol-to-olefins(MTO)is industrially applied to produce ethylene and propylene using methanol converted from coal,synthetic gas,and biomass.SAPO-34 zeolites,as the most efficient catalyst in MTO process,are subject to the rapid deactivation due to coke deposition.Recent work shows that steam regeneration can provide advantages such as low carbon dioxide emission and enhanced light olefins yield in MTO process,compared to that by air regeneration.A kinetic study on the steam regeneration of spent SAPO-34 catalyst has been carried out in this work.In doing so,we first investigated the effect of temperature on the regeneration performance by monitoring the crystal structure,acidity,residual coke properties and other structural parameters.The results show that with the increase of regeneration temperature,the compositions of residual coke on the catalyst change from pyrene and phenanthrene to naphthalene,which are normally considered as active hydrocarbon pool species in MTO reaction.However,when the regeneration temperature is too high,nitrogen oxides can be found in the residual coke.Meanwhile,as the regeneration temperature increases,the quantity of residual coke reduces and the acidity,BET surface area and pore structure of the regenerated samples can be better recovered,resulting in prolonging catalyst lifetime.We have further derived the kinetics of steam regeneration,and obtained an activation energy of about 177.8 kJ·mol^(-1).Compared that with air regeneration,the activation energy of steam regeneration is higher,indicating that the steam regeneration process is more difficult to occur.
文摘A kinetic model of MTO process over the SAPO-34 catalyst considering the effect of water and coke deposition has been proposed.The model takes into account three steps of the MTO reaction in which the products cover 5 lumped components.The water in the feed not only reduces the concentration of methanol but also alleviates the deactivation of SAPO-34 catalyst.The kinetic parameters have been estimated by the least square method.It has been proved that the calculated values in the kinetic model are in good agreement with the experimental values.
文摘An effective route to improve the catalytic performance of SAPO-34 in the methanol-to-olefin reaction by simple oxalic acid treatment was investigated. The samples were characterized by XRD, SEM, N2 adsorption-desorption, XRF, TG, 29Si MAS NMR and NH3-TPD techniques. The results indicated that the external surface acidity of SAPO-34 was finely tuned by oxalic acid treatment, and the selectivity to C2H4 on SAPO-34 and the catalyst lifetime in the methanol-to-olefin reaction were greatly improved.
文摘中试研究了好氧膨胀床(OEB)反应器处理甲醇制烯烃(MTO)废水的稳定运行过程,考察了COD去除效果、填料层膨胀情况、反应器压降、反应器排泥及其它运行情况。试验过程运行稳定,膨胀填料层负荷在0.5~1.4 kg COD/m^3/d,COD去除率一直稳定在80%以上,DO比耗基本在1~3,而且废水浊度也可以得到明显去除。确认了自主开发的OEB反应器是稳定和有效的,值得进一步优化并推广使用。
