This paper studies the method for measuring the loop resistance of GIS conductor pole based on the super capacitor producing impulse current up to several thousand amperes. This method overcomes the limitations of con...This paper studies the method for measuring the loop resistance of GIS conductor pole based on the super capacitor producing impulse current up to several thousand amperes. This method overcomes the limitations of conventional diagnostic method. Typical GIS conductor poles are chosen. Based on FEA and lab tests, the effect of different forms of current and contact condition, relationship between the temperature of contact and the loop resistance is researched. In full- scale testing under realistic operating conditions on the new 220 kV GIS using prototype instrumentation a very good sensitivity in an early stage was obtained.展开更多
The normal distribution, which has a symmetric and middle-tailed profile, is one of the most important distributions in probability theory, parametric inference, and description of quantitative variables. However, the...The normal distribution, which has a symmetric and middle-tailed profile, is one of the most important distributions in probability theory, parametric inference, and description of quantitative variables. However, there are many non-normal distributions and knowledge of a non-zero bias allows their identification and decision making regarding the use of techniques and corrections. Pearson’s skewness coefficient defined as the standardized signed distance from the arithmetic mean to the median is very simple to calculate and clear to interpret from the normal distribution model, making it an excellent measure to evaluate this assumption, complemented with the visual inspection by means of a histogram and a box-and-whisker plot. From its variant without tripling the numerator or Yule’s skewness coefficient, the objective of this methodological article is to facilitate the use of this latter measure, presenting how to obtain asymptotic and bootstrap confidence intervals for its interpretation. Not only are the formulas shown, but they are applied with an example using R program. A general rule of interpretation of ∓0.1 has been suggested, but this can only become relevant when contextualized in relation to sample size and a measure of skewness with a population or parametric value of zero. For this purpose, intervals with confidence levels of 90%, 95% and 99% were estimated with 10,000 draws at random with replacement from 57 normally distributed samples-population with different sample sizes. The article closes with suggestions for the use of this measure of skewness.展开更多
Based on the principle of residual deformation induced by superposition of the welding residual stress and working stress, the welding heat source efficiency has been determined by measuring displacement changes of sp...Based on the principle of residual deformation induced by superposition of the welding residual stress and working stress, the welding heat source efficiency has been determined by measuring displacement changes of specimens under loading and unloading in tensile tests, and combining with calculating welding parameters. Meanwhile, the welding heat source eficiencies obtained are compared with those of the measuring-calculating method. The research results show that the welding heat source efficiencies are almost the same as those obtained by the measuring-calculating method. Therefore, the welding heat source efficiency can be determined accurately by this method, and a new determining method of the heat source efficiency for the welding heat process calculating has been provided.展开更多
Objective to study an in vitro accurate measurement method for the placement depth of PICC. Methods 270 patients undergoing PICC catheterization under ultrasound guidance in outpatient PICC catheterization from March ...Objective to study an in vitro accurate measurement method for the placement depth of PICC. Methods 270 patients undergoing PICC catheterization under ultrasound guidance in outpatient PICC catheterization from March to September 2019 were selected by convenient sampling. By using the random number table method, the subjects were divided into group A (horizontal L-type measurement method) and Group B (characteristic index measurement calculation) by 1:1, with 135 cases in each group. X-ray chest radiograph was taken after catheterization in both groups, and the indwelling position of the catheter was adjusted according to the X-ray chest radiograph. The correlation between PICC predicted length and ideal depth and patient satisfaction were compared between the two groups. Results The success rate of PICC catheter tip insertion in group B was 97.78%, while that in control group A was 82.22%, the difference was statistically significant (P < 0.05). The satisfaction degree of patients in group B was significantly higher than that in group A. The differences were statistically significant (P < 0.05). Conclusion Improving the success rate of the precise depth of PICC catheter placement can significantly reduce the incidence of complications, waste of human and material resources caused by adjusting the catheter position, and significantly improve patient satisfaction.展开更多
The in-cylinder flow field of the internal combustion engine is an important factor affecting the quality and combustion quality of the fuel mixture in the cylinder. In order to calculate the high-precision flow field...The in-cylinder flow field of the internal combustion engine is an important factor affecting the quality and combustion quality of the fuel mixture in the cylinder. In order to calculate the high-precision flow field, the paper presents a flow field calculation method based on the optical flow algorithm. The motion of the point was calculated using the change in pixel intensity within two temporally adjacent frame images. The results show the high accuracy and resolution of the flow field at small displacement conditions.展开更多
利用国家认可的实验室风量检测台,对螺旋风管基本系列17种规格样品的沿程阻力进行了测试,得到了不同风速下不同规格螺旋风管的沿程阻力实测值。参照ANSI/ASHRAE Standard 120-2008,采用最小二乘法对实测值进行拟合,得到了17个螺旋风管...利用国家认可的实验室风量检测台,对螺旋风管基本系列17种规格样品的沿程阻力进行了测试,得到了不同风速下不同规格螺旋风管的沿程阻力实测值。参照ANSI/ASHRAE Standard 120-2008,采用最小二乘法对实测值进行拟合,得到了17个螺旋风管沿程阻力算式。使用数理统计方法分析得出了这些算式的相关关系,对各算式数值优化整理后采用最小二乘法再次拟合,最终将17个算式拟合为1个可适用于全系列规格螺旋风管沿程阻力计算的通用算式。计算结果表明,采用拟合通用算式计算得到的螺旋风管沿程阻力值与实测值相比平均误差小于3%,精度满足设计计算要求。展开更多
文摘This paper studies the method for measuring the loop resistance of GIS conductor pole based on the super capacitor producing impulse current up to several thousand amperes. This method overcomes the limitations of conventional diagnostic method. Typical GIS conductor poles are chosen. Based on FEA and lab tests, the effect of different forms of current and contact condition, relationship between the temperature of contact and the loop resistance is researched. In full- scale testing under realistic operating conditions on the new 220 kV GIS using prototype instrumentation a very good sensitivity in an early stage was obtained.
文摘The normal distribution, which has a symmetric and middle-tailed profile, is one of the most important distributions in probability theory, parametric inference, and description of quantitative variables. However, there are many non-normal distributions and knowledge of a non-zero bias allows their identification and decision making regarding the use of techniques and corrections. Pearson’s skewness coefficient defined as the standardized signed distance from the arithmetic mean to the median is very simple to calculate and clear to interpret from the normal distribution model, making it an excellent measure to evaluate this assumption, complemented with the visual inspection by means of a histogram and a box-and-whisker plot. From its variant without tripling the numerator or Yule’s skewness coefficient, the objective of this methodological article is to facilitate the use of this latter measure, presenting how to obtain asymptotic and bootstrap confidence intervals for its interpretation. Not only are the formulas shown, but they are applied with an example using R program. A general rule of interpretation of ∓0.1 has been suggested, but this can only become relevant when contextualized in relation to sample size and a measure of skewness with a population or parametric value of zero. For this purpose, intervals with confidence levels of 90%, 95% and 99% were estimated with 10,000 draws at random with replacement from 57 normally distributed samples-population with different sample sizes. The article closes with suggestions for the use of this measure of skewness.
文摘Based on the principle of residual deformation induced by superposition of the welding residual stress and working stress, the welding heat source efficiency has been determined by measuring displacement changes of specimens under loading and unloading in tensile tests, and combining with calculating welding parameters. Meanwhile, the welding heat source eficiencies obtained are compared with those of the measuring-calculating method. The research results show that the welding heat source efficiencies are almost the same as those obtained by the measuring-calculating method. Therefore, the welding heat source efficiency can be determined accurately by this method, and a new determining method of the heat source efficiency for the welding heat process calculating has been provided.
文摘Objective to study an in vitro accurate measurement method for the placement depth of PICC. Methods 270 patients undergoing PICC catheterization under ultrasound guidance in outpatient PICC catheterization from March to September 2019 were selected by convenient sampling. By using the random number table method, the subjects were divided into group A (horizontal L-type measurement method) and Group B (characteristic index measurement calculation) by 1:1, with 135 cases in each group. X-ray chest radiograph was taken after catheterization in both groups, and the indwelling position of the catheter was adjusted according to the X-ray chest radiograph. The correlation between PICC predicted length and ideal depth and patient satisfaction were compared between the two groups. Results The success rate of PICC catheter tip insertion in group B was 97.78%, while that in control group A was 82.22%, the difference was statistically significant (P < 0.05). The satisfaction degree of patients in group B was significantly higher than that in group A. The differences were statistically significant (P < 0.05). Conclusion Improving the success rate of the precise depth of PICC catheter placement can significantly reduce the incidence of complications, waste of human and material resources caused by adjusting the catheter position, and significantly improve patient satisfaction.
文摘The in-cylinder flow field of the internal combustion engine is an important factor affecting the quality and combustion quality of the fuel mixture in the cylinder. In order to calculate the high-precision flow field, the paper presents a flow field calculation method based on the optical flow algorithm. The motion of the point was calculated using the change in pixel intensity within two temporally adjacent frame images. The results show the high accuracy and resolution of the flow field at small displacement conditions.
文摘利用国家认可的实验室风量检测台,对螺旋风管基本系列17种规格样品的沿程阻力进行了测试,得到了不同风速下不同规格螺旋风管的沿程阻力实测值。参照ANSI/ASHRAE Standard 120-2008,采用最小二乘法对实测值进行拟合,得到了17个螺旋风管沿程阻力算式。使用数理统计方法分析得出了这些算式的相关关系,对各算式数值优化整理后采用最小二乘法再次拟合,最终将17个算式拟合为1个可适用于全系列规格螺旋风管沿程阻力计算的通用算式。计算结果表明,采用拟合通用算式计算得到的螺旋风管沿程阻力值与实测值相比平均误差小于3%,精度满足设计计算要求。
