The solid–liquid compound casting of Mg-AZ91D and Ti-TC4 alloys was developed by using pure Ni electro-deposited coating.The pouring temperatures of 660℃,690℃,720℃and 750℃were chosen to investigated the effects o...The solid–liquid compound casting of Mg-AZ91D and Ti-TC4 alloys was developed by using pure Ni electro-deposited coating.The pouring temperatures of 660℃,690℃,720℃and 750℃were chosen to investigated the effects of casting temperatures on microstructural evolution,properties,and fracture behaviors of Ni-coated TC4/AZ91D bimetals by the solid–liquid compound casting(SLCC).The scanning electron microscopy(SEM)and the energy dispersive spectroscopy(EDS)results showed that the interfacial zone mainly composed of nickel,Mg_(2)Ni and Mg-Al-Ni in the bimetals cast at 660℃.As the pouring temperature was increased to 750℃,the width of the interface zone,which mainly composed ofδ(Mg),Mg_(2)Ni,Mg-Al-Ni,Mg_(3)TiNi_(2) and Al_(3)Ni,gradually increased.The microhardness tests showed that the micro-hardness of the interface zone was smaller than that of TC4 substrate but larger than that of the cast AZ91D matrix.At the pouring temperature of 720℃,the Ni-coated TC4/AZ91D bimetals had the most typical homogeneous interface,which had granular Mg-Al-Ni ternary phase but no ribbon-like Al3Ni binary phase,and achieved the highest shear strength of 97.35MPa.Meanwhile,further fracture behavior analysis showed that most fracture failure of Ni-coated TC4/AZ91D bimetals occurred at the Mg_(2)Ni+δ(Mg)eutectic structure and Al_(3)Ni hard intermetallic.展开更多
基金The authors would like to acknowledge the financial supports from the National Natural Science Foundation of China(No.51875062).
文摘The solid–liquid compound casting of Mg-AZ91D and Ti-TC4 alloys was developed by using pure Ni electro-deposited coating.The pouring temperatures of 660℃,690℃,720℃and 750℃were chosen to investigated the effects of casting temperatures on microstructural evolution,properties,and fracture behaviors of Ni-coated TC4/AZ91D bimetals by the solid–liquid compound casting(SLCC).The scanning electron microscopy(SEM)and the energy dispersive spectroscopy(EDS)results showed that the interfacial zone mainly composed of nickel,Mg_(2)Ni and Mg-Al-Ni in the bimetals cast at 660℃.As the pouring temperature was increased to 750℃,the width of the interface zone,which mainly composed ofδ(Mg),Mg_(2)Ni,Mg-Al-Ni,Mg_(3)TiNi_(2) and Al_(3)Ni,gradually increased.The microhardness tests showed that the micro-hardness of the interface zone was smaller than that of TC4 substrate but larger than that of the cast AZ91D matrix.At the pouring temperature of 720℃,the Ni-coated TC4/AZ91D bimetals had the most typical homogeneous interface,which had granular Mg-Al-Ni ternary phase but no ribbon-like Al3Ni binary phase,and achieved the highest shear strength of 97.35MPa.Meanwhile,further fracture behavior analysis showed that most fracture failure of Ni-coated TC4/AZ91D bimetals occurred at the Mg_(2)Ni+δ(Mg)eutectic structure and Al_(3)Ni hard intermetallic.
