Mg−Al layered double hydroxides(LDHs),produced on cast Mg−xCa(x=0.5,0.8,2.0,wt.%)alloys by an in-situ growth method,showed good corrosion resistance compared to the bare magnesium substrate.The influence mechanism of ...Mg−Al layered double hydroxides(LDHs),produced on cast Mg−xCa(x=0.5,0.8,2.0,wt.%)alloys by an in-situ growth method,showed good corrosion resistance compared to the bare magnesium substrate.The influence mechanism of the second phase(Mg_(2)Ca)on LDHs production was investigated.Increasing Ca content increased the amount of Mg_(2)Ca,decreasing the grain size and the corrosion rate of the alloys.The increased amount of the second phase particles and the grain refinement promoted the growth of LDHs,and thus led to the decreasing of corrosion rate of the Mg−xCa alloys with LDHs.A higher Mg_(2)Ca amount resulted in forming fluffy LDHs.Due to the dual effects of the second phase(Mg_(2)Ca)for LDHs growth and microgalvanic corrosion,LDHs/Mg−0.8Ca showed the lowest corrosion rate.展开更多
Adsorption of 2, 4, 6-trichlorophenol（TCP） onto the calcined Mg/Al-CO_3 layered double hydroxide（CLDH） was investigated. The prepared Mg/Al-CO_3 layered double hydroxide（LDH） and CLDH were characterized by powde...Adsorption of 2, 4, 6-trichlorophenol（TCP） onto the calcined Mg/Al-CO_3 layered double hydroxide（CLDH） was investigated. The prepared Mg/Al-CO_3 layered double hydroxide（LDH） and CLDH were characterized by powder X-ray diffraction（XRD） and thermo gravimetric analyzer-differential scanning calorimeters（TG-DSC）. Moreover, 2,4,6-trichlorophenol（TCP） was removed effectively（94.7% of removal percentage in 9h） under the optimized experimental conditions. The adsorption kinetics data fitted the pseudosecond-order model well. The Freundlich, Langmuir, and Tempkin adsorption models were applied to the experimental equilibrium adsorption data at different temperatures of solution. The adsorption data fitted the Freundlieh adsorption isotherm with good values of the correlation coefficient. A mechanism of the adsorption process is proposed according to the intraparticle diffusion model, which indicates that the overall rate of adsorption can be described as three steps.展开更多
A clean method for preparing layered double hydroxides （LDHs） has been developed, featured by using the hydroxides of two different metals as starting materials by atom-economic reactions. The reactions were carried...A clean method for preparing layered double hydroxides （LDHs） has been developed, featured by using the hydroxides of two different metals as starting materials by atom-economic reactions. The reactions were carried out under hydrothermal conditions in either a high pressure autoclave or a microwave digester. The compositions, structural parameters and thermal behavior of the resulting LDHs are very similar to those of materials produced by using the separate nucleation and aging steps （SNAS） method. The major advantage of the new method is that no by-product is produced, so that filtration and washing processes are unnecessary. The consequent reduction in water consumption is beneficial to the environment.展开更多
基金supported by the National Natural Science Foundation of China(No.51971040)the Fundamental Research Funds for the Central Universities,China(No.2020CDJQY-A007)+1 种基金China Postdoctoral Science Foundation(Nos.2017M620410,2018T110942)the Chongqing Postdoctoral Scientific Research Foundation,China(No.Xm2017010).
文摘Mg−Al layered double hydroxides(LDHs),produced on cast Mg−xCa(x=0.5,0.8,2.0,wt.%)alloys by an in-situ growth method,showed good corrosion resistance compared to the bare magnesium substrate.The influence mechanism of the second phase(Mg_(2)Ca)on LDHs production was investigated.Increasing Ca content increased the amount of Mg_(2)Ca,decreasing the grain size and the corrosion rate of the alloys.The increased amount of the second phase particles and the grain refinement promoted the growth of LDHs,and thus led to the decreasing of corrosion rate of the Mg−xCa alloys with LDHs.A higher Mg_(2)Ca amount resulted in forming fluffy LDHs.Due to the dual effects of the second phase(Mg_(2)Ca)for LDHs growth and microgalvanic corrosion,LDHs/Mg−0.8Ca showed the lowest corrosion rate.
基金Funded by the National Natural Science Foundation of China(No.21476269)
文摘Adsorption of 2, 4, 6-trichlorophenol（TCP） onto the calcined Mg/Al-CO_3 layered double hydroxide（CLDH） was investigated. The prepared Mg/Al-CO_3 layered double hydroxide（LDH） and CLDH were characterized by powder X-ray diffraction（XRD） and thermo gravimetric analyzer-differential scanning calorimeters（TG-DSC）. Moreover, 2,4,6-trichlorophenol（TCP） was removed effectively（94.7% of removal percentage in 9h） under the optimized experimental conditions. The adsorption kinetics data fitted the pseudosecond-order model well. The Freundlich, Langmuir, and Tempkin adsorption models were applied to the experimental equilibrium adsorption data at different temperatures of solution. The adsorption data fitted the Freundlieh adsorption isotherm with good values of the correlation coefficient. A mechanism of the adsorption process is proposed according to the intraparticle diffusion model, which indicates that the overall rate of adsorption can be described as three steps.
文摘A clean method for preparing layered double hydroxides （LDHs） has been developed, featured by using the hydroxides of two different metals as starting materials by atom-economic reactions. The reactions were carried out under hydrothermal conditions in either a high pressure autoclave or a microwave digester. The compositions, structural parameters and thermal behavior of the resulting LDHs are very similar to those of materials produced by using the separate nucleation and aging steps （SNAS） method. The major advantage of the new method is that no by-product is produced, so that filtration and washing processes are unnecessary. The consequent reduction in water consumption is beneficial to the environment.
