Mn-rich LiFe_(1-x)Mn_(x)PO_(4)(x>0.5),which combines the high operation voltage of LiMnPO_(4)with excellent rate performa nce of LiFePO4,is hindered by its sluggish kinetic properties.Herein,thermodynamic equilibri...Mn-rich LiFe_(1-x)Mn_(x)PO_(4)(x>0.5),which combines the high operation voltage of LiMnPO_(4)with excellent rate performa nce of LiFePO4,is hindered by its sluggish kinetic properties.Herein,thermodynamic equilibrium analysis of Mn^(2+)-Fe^(2+)-Mg^(2+)-C_(2)O_(4)^(2-)-H_(2)O system is used to guide the design and preparation of insitu Mg-doped(Fe_(0.4)Mn_(0.6))_(1-x)Mg_(x)C_(2)O_(4)intermediate,which is then employed as an innovative precursor to synthesize high-performance Mg-doped LiFe_(0.4)Mn_(0.6)PO_(4).It indicates that the metal ions with a high precipitation efficiency and the stoichiometric precursors with uniform element distribution can be achieved under the optimized thermodynamic conditions.Meanwhile,accelerated Li+diffusivity and reduced charge transfer resistance originating from Mg doping are verified by various kinetic characterizations.Benefiting from the contributions of inherited homogeneous element distribution,small particle size,uniform carbon layer coating,enhanced Li+migration ability and structural stability induced by Mg doping,the Li(Fe_(0.4)Mn_(0.6))_(0.97)Mg_(0.03)PO_(4)/C exhibits splendid electrochemical performance.展开更多
Perovskite SrTaO_(2)N is one of the most promising narrow-bandgap photocatalysts for Z-scheme overall water splitting.However,the formation of defect states during thermal nitridation severely hinders the separation o...Perovskite SrTaO_(2)N is one of the most promising narrow-bandgap photocatalysts for Z-scheme overall water splitting.However,the formation of defect states during thermal nitridation severely hinders the separation of charges,resulting in poor photocatalytic activity.In the present study,we successfully synthesize SrTaO_(2)N photocatalyst with low density of defect states,uniform morphology and particle size by flux-assisted one-pot nitridation combined with Mg doping.Some important parameters,such as the size of unit cell,the content of nitrogen,and microstructure,prove the successful doping of Mg.The defect-related carrier recombination has been significantly reduced by Mg doping,which effectively promotes the charge separation.Moreover,Mg doping induces a change of the band edge,which makes proton reduction have a stronger driving force.After modifying with the core/shell-structured Pt/Cr_(2)O_(3)cocatalyst,the H_(2)evolution activity of the optimized SrTaO_(2)N:Mg is 10 times that of the undoped SrTaO_(2)N,with an impressive apparent quantum yield of 1.51%at 420 nm.By coupling with Au-FeCoO_(x)modified BiVO_(4)as an O_(2)-evolution photocatalyst and[Fe(CN)_(6)]_(3)−/[Fe(CN)_(6)]_(4)−as the redox couple,a redox-based Z-scheme overall water splitting system is successfully constructed with an apparent quantum yield of 1.36%at 420 nm.This work provides an alternative way to prepare oxynitride semiconductors with reduced defects to promote the conversion of solar energy.展开更多
The Zintl compound Mg3Sb2 has been recently identified as promising thermoelectric material owing to its high thermoelectric performance and cost-effective,nontoxicity and environment friendly characteristics.However,...The Zintl compound Mg3Sb2 has been recently identified as promising thermoelectric material owing to its high thermoelectric performance and cost-effective,nontoxicity and environment friendly characteristics.However,the intrinsically p-type Mg3Sb2 shows low figure of merit（z T = 0.23 at 723 K） for its poor electrical conductivity.In this study,a series of Mg（3-x）LixSb2 bulk materials have been prepared by high-energy ball milling and spark plasma sintering（SPS） process.Electrical transport measurements on these materials revealed significant improvement on the power factor with respect to the undoped sample,which can be essentially attributed to the increased carrier concentration,leading to a maximum z T of0.59 at 723 K with the optimum doping level x = 0.01.Additionally,the engineering z T and energy conversion efficiency are calculated to be 0.235 and 4.89%,respectively.To our best knowledge,those are the highest values of all reported p-type Mg3Sb2-based compounds with single element doping.展开更多
The Mg acceptor activation mechanism and hole transport characteristics in AlGaN alloy with Mg doping concentration(~ 1020 cm-3) grown by metal–organic chemical vapor deposition(MOCVD) are systematically studied thro...The Mg acceptor activation mechanism and hole transport characteristics in AlGaN alloy with Mg doping concentration(~ 1020 cm-3) grown by metal–organic chemical vapor deposition(MOCVD) are systematically studied through optical and electrical properties. Emission lines of shallow oxygen donors and(VⅢ complex)1- as well as VN3+ and neutral Mg acceptors are observed, which indicate that self-compensation is occurred in Mg-doped AlGaN at highly doping levels. The fitting of the temperature-dependent Hall effect data shows that the acceptor activation energy values in Mgdoped AlxGa1-xN(x = 0.23, 0.35) are 172 meV and 242 meV, and the hole concentrations at room temperature are 1.2×1018 cm-3 and 3.3× 1017 cm-3, respectively. Therefore, it is believed that there exists the combined effect of the Coulomb potentials of the dopants and screening of the Coulomb potentials by a high hole concentration. Moreover, due to the high ionized acceptors’ concentration and compensation ratio, the impurity conduction becomes more prominent and the valence band mobility drops sharply at low temperature.展开更多
The Nickel-rich layered cathode materials charged to 4.5 V can obtain a specific capacity of more than 200 m Ah g^(-1).However,the nickel-rich layered cathode materials suffer from the severe capacity fade during high...The Nickel-rich layered cathode materials charged to 4.5 V can obtain a specific capacity of more than 200 m Ah g^(-1).However,the nickel-rich layered cathode materials suffer from the severe capacity fade during high-voltage cycling,which is related to the phase transformation and the surface sides reactions caused by the lattice oxygen evolution.Here,the simultaneous construction of a Mg,Ti-based surface integrated layer and bulk doping through Mg,Ti surface treatment could suppress the lattice oxygen evolution of Nirich material at deep charging.More importantly,Mg and Ti are co-doped into the particles surface to form an Mg_(2)TiO_(4) and Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with Mg and Ti vacancies.In the constructed surface integrated layer,the reverse electric field in the Mg_(2)TiO_(4) effectively suppressed the outward migration of the lattice oxygen anions,while Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with high electronic conductivity and good lithium ion conductor could effectively maintained the stability of the reaction interface during highvoltage cycling.Meanwhile,bulk Mg and Ti co-doping can mitigate the migration of Ni ions in the bulk to keep the stability of transition metal–oxygen(M-O)bond at deep charging.As a result,the NCM@MTP cathode shows excellent long cycle stability at high-voltage charging,which keep high capacity retention of 89.3%and 84.3%at 1 C after 200 and 100 cycles under room and elevated temperature of 25 and 55°C,respectively.This work provides new insights for manipulating the surface chemistry of electrode materials to suppress the lattice oxygen evolution at high charging voltage.展开更多
Despite the advanced efficiency of perovskite solar cells(PSCs),electron transportation is still a pending issue.Here the polymer polyvinylpyrrolidone(PVP)is used to enhance the electron injection,which is thanks to t...Despite the advanced efficiency of perovskite solar cells(PSCs),electron transportation is still a pending issue.Here the polymer polyvinylpyrrolidone(PVP)is used to enhance the electron injection,which is thanks to the passivation of the defects at the interface between the ZnO electron transporting layer(ETL)and the perovskite.The application of the PVP layer inhibits the device degradation,and 80%of the primary efficiency is kept after 30 d storage in air condition.Additionally,the efficiency of the device is further enhanced by improving the conductivity and crystallinity of the ZnO ETL via Magnesium(Mg)doping in the ZnO nanorods(ZnO NRs).Moreover,the preparation parameters of the ZnO NRs are optimized.By employing the high-crystallinity ZnO ETL and the PVP layer,the power conversion efficiency(PCE)of the champion device is increased from 16.29%to 19.63%.These results demonstrate the advantages of combining mesoscale manipulation with interface modification and doping together.展开更多
基金financially supported by the National Natural Science Foundation of China(No.51904250)the China Postdoctoral Science Foundation(No.2021M692254)+2 种基金the Sichuan Science and Technology Program(No.2022YFG0098)the Fundamental Research Funds for the Central Universities(Nos.2021CDSN-02,2022SCU12002,2022CDZG-17,2022CDSN-08,2022CDZG-9)the Hohhot Science and Technology Program(No.2023-Jie Bang Gua Shuai-Gao-3)。
文摘Mn-rich LiFe_(1-x)Mn_(x)PO_(4)(x>0.5),which combines the high operation voltage of LiMnPO_(4)with excellent rate performa nce of LiFePO4,is hindered by its sluggish kinetic properties.Herein,thermodynamic equilibrium analysis of Mn^(2+)-Fe^(2+)-Mg^(2+)-C_(2)O_(4)^(2-)-H_(2)O system is used to guide the design and preparation of insitu Mg-doped(Fe_(0.4)Mn_(0.6))_(1-x)Mg_(x)C_(2)O_(4)intermediate,which is then employed as an innovative precursor to synthesize high-performance Mg-doped LiFe_(0.4)Mn_(0.6)PO_(4).It indicates that the metal ions with a high precipitation efficiency and the stoichiometric precursors with uniform element distribution can be achieved under the optimized thermodynamic conditions.Meanwhile,accelerated Li+diffusivity and reduced charge transfer resistance originating from Mg doping are verified by various kinetic characterizations.Benefiting from the contributions of inherited homogeneous element distribution,small particle size,uniform carbon layer coating,enhanced Li+migration ability and structural stability induced by Mg doping,the Li(Fe_(0.4)Mn_(0.6))_(0.97)Mg_(0.03)PO_(4)/C exhibits splendid electrochemical performance.
文摘Perovskite SrTaO_(2)N is one of the most promising narrow-bandgap photocatalysts for Z-scheme overall water splitting.However,the formation of defect states during thermal nitridation severely hinders the separation of charges,resulting in poor photocatalytic activity.In the present study,we successfully synthesize SrTaO_(2)N photocatalyst with low density of defect states,uniform morphology and particle size by flux-assisted one-pot nitridation combined with Mg doping.Some important parameters,such as the size of unit cell,the content of nitrogen,and microstructure,prove the successful doping of Mg.The defect-related carrier recombination has been significantly reduced by Mg doping,which effectively promotes the charge separation.Moreover,Mg doping induces a change of the band edge,which makes proton reduction have a stronger driving force.After modifying with the core/shell-structured Pt/Cr_(2)O_(3)cocatalyst,the H_(2)evolution activity of the optimized SrTaO_(2)N:Mg is 10 times that of the undoped SrTaO_(2)N,with an impressive apparent quantum yield of 1.51%at 420 nm.By coupling with Au-FeCoO_(x)modified BiVO_(4)as an O_(2)-evolution photocatalyst and[Fe(CN)_(6)]_(3)−/[Fe(CN)_(6)]_(4)−as the redox couple,a redox-based Z-scheme overall water splitting system is successfully constructed with an apparent quantum yield of 1.36%at 420 nm.This work provides an alternative way to prepare oxynitride semiconductors with reduced defects to promote the conversion of solar energy.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.U1601213 and 51572287)the Key Research Program of Frontier Sciences of the Chinese Academy of Sciences(Grant No.QYZDB-SSW-SLH013)
文摘The Zintl compound Mg3Sb2 has been recently identified as promising thermoelectric material owing to its high thermoelectric performance and cost-effective,nontoxicity and environment friendly characteristics.However,the intrinsically p-type Mg3Sb2 shows low figure of merit（z T = 0.23 at 723 K） for its poor electrical conductivity.In this study,a series of Mg（3-x）LixSb2 bulk materials have been prepared by high-energy ball milling and spark plasma sintering（SPS） process.Electrical transport measurements on these materials revealed significant improvement on the power factor with respect to the undoped sample,which can be essentially attributed to the increased carrier concentration,leading to a maximum z T of0.59 at 723 K with the optimum doping level x = 0.01.Additionally,the engineering z T and energy conversion efficiency are calculated to be 0.235 and 4.89%,respectively.To our best knowledge,those are the highest values of all reported p-type Mg3Sb2-based compounds with single element doping.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2017YFB0403100 and 2017YFB0403101)the National Natural Science Foundation of China(Grant Nos.61704149,61674076,and 61605071)+7 种基金the Natural Science Foundation of Jiangsu Province,China(Grant Nos.BY2013077,BK20141320,and BE2015111)the Project of Science and Technology Development Program in Shandong Province,China(Grant Nos.2013YD02054 and 2013YD02008)the Project of Shandong Provincial Higher Educational Science and Technology Program,China(Grant No.J13LN08)the Collaborative Innovation Center of Solid State Lighting and Energy-saving Electronics,Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the Six-Talent Peaks Project of Jiangsu Province,China(Grant No.XYDXX-081)the Open Fund of the State Key Laboratory on Integrated Optoelectronics,China(Grant No.IOSKL2017KF03)the Project of Autonomous Innovation and Achievement Transformation Program in Zaozhuang City,China(Grant No.2017GH3)the Overseas Study Program Funded by Shandong Provincial Government,China,the Laboratory Open Fund from Jiangsu Key Laboratory of Photoelectric Information Functional Materials,China,and the Doctoral Foundation Project of Zaozhuang University,China.
文摘The Mg acceptor activation mechanism and hole transport characteristics in AlGaN alloy with Mg doping concentration(~ 1020 cm-3) grown by metal–organic chemical vapor deposition(MOCVD) are systematically studied through optical and electrical properties. Emission lines of shallow oxygen donors and(VⅢ complex)1- as well as VN3+ and neutral Mg acceptors are observed, which indicate that self-compensation is occurred in Mg-doped AlGaN at highly doping levels. The fitting of the temperature-dependent Hall effect data shows that the acceptor activation energy values in Mgdoped AlxGa1-xN(x = 0.23, 0.35) are 172 meV and 242 meV, and the hole concentrations at room temperature are 1.2×1018 cm-3 and 3.3× 1017 cm-3, respectively. Therefore, it is believed that there exists the combined effect of the Coulomb potentials of the dopants and screening of the Coulomb potentials by a high hole concentration. Moreover, due to the high ionized acceptors’ concentration and compensation ratio, the impurity conduction becomes more prominent and the valence band mobility drops sharply at low temperature.
基金supported by the National Natural Science Foundation of China(51902108,51762006,51964013)the Special Projects for Central Government to Guide Local Technological Development(GUIKE ZY20198008)+2 种基金the Guangxi InnovationDriven Development Subject(GUIKE AA19182020,GUIKE AA19254004)the Guangxi Technology Base and Talent Subject(GUIKE AD18126001,GUIKE AD20999012,GUIKE AD20297086)the Special Fund for Guangxi Distinguished Expert。
文摘The Nickel-rich layered cathode materials charged to 4.5 V can obtain a specific capacity of more than 200 m Ah g^(-1).However,the nickel-rich layered cathode materials suffer from the severe capacity fade during high-voltage cycling,which is related to the phase transformation and the surface sides reactions caused by the lattice oxygen evolution.Here,the simultaneous construction of a Mg,Ti-based surface integrated layer and bulk doping through Mg,Ti surface treatment could suppress the lattice oxygen evolution of Nirich material at deep charging.More importantly,Mg and Ti are co-doped into the particles surface to form an Mg_(2)TiO_(4) and Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with Mg and Ti vacancies.In the constructed surface integrated layer,the reverse electric field in the Mg_(2)TiO_(4) effectively suppressed the outward migration of the lattice oxygen anions,while Mg_(0.5–x)Ti_(2–y)(PO_(4))_(3) outer layer with high electronic conductivity and good lithium ion conductor could effectively maintained the stability of the reaction interface during highvoltage cycling.Meanwhile,bulk Mg and Ti co-doping can mitigate the migration of Ni ions in the bulk to keep the stability of transition metal–oxygen(M-O)bond at deep charging.As a result,the NCM@MTP cathode shows excellent long cycle stability at high-voltage charging,which keep high capacity retention of 89.3%and 84.3%at 1 C after 200 and 100 cycles under room and elevated temperature of 25 and 55°C,respectively.This work provides new insights for manipulating the surface chemistry of electrode materials to suppress the lattice oxygen evolution at high charging voltage.
基金Project supported by Beijing Natural Science Foundation,China(Grant No.2202030)the National Natural Science Foundation of China(Grant No.41422050303)+1 种基金the Program of Introducing Talents of Discipline to Universities(Grant No.B14003)the Fundamental Research Funds for Central Universities,China(Grant Nos.FRF-GF-19-001A and FRF-GF-19-002B).
文摘Despite the advanced efficiency of perovskite solar cells(PSCs),electron transportation is still a pending issue.Here the polymer polyvinylpyrrolidone(PVP)is used to enhance the electron injection,which is thanks to the passivation of the defects at the interface between the ZnO electron transporting layer(ETL)and the perovskite.The application of the PVP layer inhibits the device degradation,and 80%of the primary efficiency is kept after 30 d storage in air condition.Additionally,the efficiency of the device is further enhanced by improving the conductivity and crystallinity of the ZnO ETL via Magnesium(Mg)doping in the ZnO nanorods(ZnO NRs).Moreover,the preparation parameters of the ZnO NRs are optimized.By employing the high-crystallinity ZnO ETL and the PVP layer,the power conversion efficiency(PCE)of the champion device is increased from 16.29%to 19.63%.These results demonstrate the advantages of combining mesoscale manipulation with interface modification and doping together.
