The flow stress behavior of spray-formed Al-9Mg-1.1Li-0.5Mn alloy was studied using thermal simulation tests on a Gleeble-3500machine over deformation temperature range of300-450℃and strain rate of0.01-10s^-1.The mic...The flow stress behavior of spray-formed Al-9Mg-1.1Li-0.5Mn alloy was studied using thermal simulation tests on a Gleeble-3500machine over deformation temperature range of300-450℃and strain rate of0.01-10s^-1.The microstructural evolution of the alloy during the hot compression process was characterized by transmission electron microscopy(TEM)and electron back scatter diffractometry(EBSD).The results show that the flow stress behavior and microstructural evolution are sensitive to deformation parameters.The peak stress level,steady flow stress,dislocation density and amount of substructures of the alloy increase with decreasing deformation temperature and increasing strain rate.Conversely,the high angle grain boundary area increases,the grain boundary is in serrated shape and the dynamic recrystallization in the alloy occurs.The microstructure of the alloy is fibrous-like and the main softening mechanism is dynamic recovery during steady deformation state.The flow stress behavior can be represented by the Zener-Hollomon parameter Z in the hyperbolic sine equation with the hot deformation activation energy of184.2538kJ/mol.The constitutive equation and the hot processing map were established.The hot processing map exhibits that the optimum processing conditions for Al-9Mg-1.1Li-0.5Mn alloy are in deformation temperature range from380to450℃and strain rate range from0.01to0.1s^-1.展开更多
文摘采用光学显微镜和蠕变实验机研究Mg-9Gd-4Y-1Zn-0.5Zr合金在不同温度和应力下的高温蠕变行为。结果表明：在应力为70～130 MPa范围内,200℃时Mg-9Gd-4Y-1Zn-0.5Zr合金的蠕变应力指数n=1.63,蠕变机制为晶界滑动,250℃时蠕变应力指数n=2.63,蠕变机制为位错滑移;在蠕变温度为200～250℃范围内,应力分别为70、90、110和130 MPa时,合金的蠕变激活能Qc分别为108.5、118.9、127.6和134.3 k J/mol;随着温度和应力的增加,合金晶粒长大,合金的蠕变机制由晶界滑动控制转变为位错滑移控制。
基金Project (2017JJ2073) supported by the Natural Science Foundation of Hunan Province,China
文摘The flow stress behavior of spray-formed Al-9Mg-1.1Li-0.5Mn alloy was studied using thermal simulation tests on a Gleeble-3500machine over deformation temperature range of300-450℃and strain rate of0.01-10s^-1.The microstructural evolution of the alloy during the hot compression process was characterized by transmission electron microscopy(TEM)and electron back scatter diffractometry(EBSD).The results show that the flow stress behavior and microstructural evolution are sensitive to deformation parameters.The peak stress level,steady flow stress,dislocation density and amount of substructures of the alloy increase with decreasing deformation temperature and increasing strain rate.Conversely,the high angle grain boundary area increases,the grain boundary is in serrated shape and the dynamic recrystallization in the alloy occurs.The microstructure of the alloy is fibrous-like and the main softening mechanism is dynamic recovery during steady deformation state.The flow stress behavior can be represented by the Zener-Hollomon parameter Z in the hyperbolic sine equation with the hot deformation activation energy of184.2538kJ/mol.The constitutive equation and the hot processing map were established.The hot processing map exhibits that the optimum processing conditions for Al-9Mg-1.1Li-0.5Mn alloy are in deformation temperature range from380to450℃and strain rate range from0.01to0.1s^-1.
