A new kind of functionally graded materials (FGM) with density gradient has come to show great potentials as flier-plates for creating quasi-isotropic compression waves.In order to meet the demand of lower density in ...A new kind of functionally graded materials (FGM) with density gradient has come to show great potentials as flier-plates for creating quasi-isotropic compression waves.In order to meet the demand of lower density in the front face for such flier-plate,Mg with a low density of 1.74g/cm3 is selected to make a Mg-Ti FGM.Mg-Ti alloys with various weight ratios were sintered by spark plasma sintering (SPS) technique at relative low temperatures,and the processing of densification is mainly investigated.It is found that,up to 75wt%Ti,the Mg-Ti alloys can be fully densified at 560℃ due to the conglutination of Mg and the formation of a small amount of Mg-Ti solid solution.Finally,the Mg-Ti FGM with a density gradient from 1.74g/cm3 to 3.23g/cm3 is successfully fabricated.展开更多
The effects of rare earths(RE)-Mg-Ti compound modification on the structures and properties of high-carbon high speed steel(HSS) were researched.The impact toughness(α_k),the fracture toughness(K_(1c))and threshold o...The effects of rare earths(RE)-Mg-Ti compound modification on the structures and properties of high-carbon high speed steel(HSS) were researched.The impact toughness(α_k),the fracture toughness(K_(1c))and threshold of fatigue crack growth(ΔK_(th))are tested.The thermal fatigue test is done on a self-straining thermal fatigue tester,the wear test is done on a high temperature wear test machine.The results show that the matrix can be refined by the RE-Mg-Ti compound modification,the eutectic carbides are inclined to spheroidicize and are distributed evenly,the morphology and distribution of eutectic carbides are improved by appropriate RE-Mg-Ti complex modification.After RE-Mg-Ti compound modification,a little effects can be found on the strength,hardness and red hardness,but the fracture toughness(K_(1c)) and threshold of fatigue crack growth(△K_(th)) are improved in the meantime,the impact toughness (α_k) is increased by over one time,and the resistance to thermal fatigue and wear resistance at an elevated temperature are remarkably improved.展开更多
Mg(and Mg alloys)and Ti(and Ti alloys)are two important classes of metallic implant materials which are respectively completely degradable and non-degradable after implantation.Making composites composed of them offer...Mg(and Mg alloys)and Ti(and Ti alloys)are two important classes of metallic implant materials which are respectively completely degradable and non-degradable after implantation.Making composites composed of them offers the promise for combining their property advantages for bone repair.Here,we present a Mg-Ti composite fabricated by pressureless infiltration of pure Mg melt into 3D printed Ti scaffold,and demonstrate a potential of the composite for use as new partially degradable and bioactive implant materials.The composite has such architecture that the Mg and Ti phases are topologically bicontinuous and mutually interspersed in 3D space,and exhibits several advantages over its constituents,such as higher strengths than as-cast pure Mg and Ti scaffold along with lower Young’s modulus than dense Ti.Additionally,the degradation of Mg phase may induce the formation and ingrowth of new bone tissues into the Ti scaffold to form mechanical interlocking between them;in this process,the Ti scaffold provides constant support and Young’s modulus adaptively decreases toward that of bone.Despite the accelerated corrosion than pure Mg,the composite remains non-cytotoxic and does not cause obvious adverse reactions after implantation as revealed by in vitro and in vivo experiments.This study may offer a new possibility for combining mechanical durability and bioactivity in implant materials,and allow for customized and targeted design of the implant.展开更多
文摘A new kind of functionally graded materials (FGM) with density gradient has come to show great potentials as flier-plates for creating quasi-isotropic compression waves.In order to meet the demand of lower density in the front face for such flier-plate,Mg with a low density of 1.74g/cm3 is selected to make a Mg-Ti FGM.Mg-Ti alloys with various weight ratios were sintered by spark plasma sintering (SPS) technique at relative low temperatures,and the processing of densification is mainly investigated.It is found that,up to 75wt%Ti,the Mg-Ti alloys can be fully densified at 560℃ due to the conglutination of Mg and the formation of a small amount of Mg-Ti solid solution.Finally,the Mg-Ti FGM with a density gradient from 1.74g/cm3 to 3.23g/cm3 is successfully fabricated.
基金Projects (51101126, 51071123) supported by the National Natural Science Foundation of ChinaProjects (20110491684, 2012T50817) supported by the China Postdoctoral Science FoundationProject (20110942K) supported by the Open Fund of State Key Laboratory of Powder Metallurgy of Central South University, China
文摘The effects of rare earths(RE)-Mg-Ti compound modification on the structures and properties of high-carbon high speed steel(HSS) were researched.The impact toughness(α_k),the fracture toughness(K_(1c))and threshold of fatigue crack growth(ΔK_(th))are tested.The thermal fatigue test is done on a self-straining thermal fatigue tester,the wear test is done on a high temperature wear test machine.The results show that the matrix can be refined by the RE-Mg-Ti compound modification,the eutectic carbides are inclined to spheroidicize and are distributed evenly,the morphology and distribution of eutectic carbides are improved by appropriate RE-Mg-Ti complex modification.After RE-Mg-Ti compound modification,a little effects can be found on the strength,hardness and red hardness,but the fracture toughness(K_(1c)) and threshold of fatigue crack growth(△K_(th)) are improved in the meantime,the impact toughness (α_k) is increased by over one time,and the resistance to thermal fatigue and wear resistance at an elevated temperature are remarkably improved.
基金Science Fund of Sichuan Province for Distinguished Young Scholars Sichuan Science(2023NSFSC1942)National Double First-Class Universities Construction Grant of Sichuan University(2020SCUNG201)。
基金supported by the National Key R&D Program of China(No.2020YFA0710404)the National Natural Science Foundation of China(Nos.51871216 and 52173269)the Youth Innovation Promotion Association CAS.
文摘Mg(and Mg alloys)and Ti(and Ti alloys)are two important classes of metallic implant materials which are respectively completely degradable and non-degradable after implantation.Making composites composed of them offers the promise for combining their property advantages for bone repair.Here,we present a Mg-Ti composite fabricated by pressureless infiltration of pure Mg melt into 3D printed Ti scaffold,and demonstrate a potential of the composite for use as new partially degradable and bioactive implant materials.The composite has such architecture that the Mg and Ti phases are topologically bicontinuous and mutually interspersed in 3D space,and exhibits several advantages over its constituents,such as higher strengths than as-cast pure Mg and Ti scaffold along with lower Young’s modulus than dense Ti.Additionally,the degradation of Mg phase may induce the formation and ingrowth of new bone tissues into the Ti scaffold to form mechanical interlocking between them;in this process,the Ti scaffold provides constant support and Young’s modulus adaptively decreases toward that of bone.Despite the accelerated corrosion than pure Mg,the composite remains non-cytotoxic and does not cause obvious adverse reactions after implantation as revealed by in vitro and in vivo experiments.This study may offer a new possibility for combining mechanical durability and bioactivity in implant materials,and allow for customized and targeted design of the implant.
