Recent advances in electrochemical performance of Mg-based electrochemical energy storage materials in supercapacitors:Enhancement and mechanism

The application of Mg-based electrochemical energy storage materials in high performance supercapacitors is an essential step to promote the exploitation and utilization of magnesium resources in the field of energy storage.Unfortunately,the inherent chemical properties of magnesium lead to poor cycling stability and electrochemical reactivity,which seriously limit the application of Mg-based materials in supercapacitors.Herein,in this review,more than 70 research papers published in recent 10 years were collected and analyzed.Some representative research works were selected,and the results of various regulative strategies to improve the electrochemical performance of Mg-based materials were discussed.The effects of various regulative strategies(such as constructing nanostructures,synthesizing composites,defect engineering,and binder-free synthesis,etc.)on the electrochemical performance and their mechanism are demonstrated using spinelstructured MgX_(2)O_(4) and layered structured Mg-X-LDHs as examples.In addition,the application of magnesium oxide and magnesium hydroxide in electrode materials,MXene's solid spacers and hard templates are introduced.Finally,the challenges and outlooks of Mg-based electrochemical energy storage materials in high performance supercapacitors are also discussed.

Progress and prospects of Mg-based amorphous alloys in azo dye wastewater treatment

Mg-based amorphous alloys exhibit efficient catalytic performance and excellent biocompatibility with a promising application probability,specifically in the field of azo dye wastewater degradation.However,the problems like difficulty in preparation and poor cycling stability need to be solved.At present,Mg-based amorphous alloys applied in wastewater degradation are available in powder and ribbon.The amorphous alloy powder fabricated by ball milling has a high specific surface area,and its reactivity is thousands of times better than that of gas atomized alloy powder.But the development is limited due to the high energy consumption,difficult and costly process of powder recycling.The single roller melt-spinning method is a new manufacturing process of amorphous alloy ribbon.Compared to amorphous powder,the specific surface area of amorphous ribbon is relatively lower,therefore,it is necessary to carry out surface modification to enhance it.Dealloying is a way that can form a pore structure on the surface of the amorphous alloys,increasing the specific surface area and providing more reactive sites,which all contribute to the catalytic performance.Exploring the optimal conditions for Mg-based amorphous alloys in wastewater degradation by adjusting amorphous alloy composition,choosing suitable method to preparation and surface modification,reducing cost,expanding the pH range will advance the steps to put Mg-based amorphous alloys in industrial environments into practice.

Recent advances in flat sheet mixed matrix membrane modified by Mg-based layered double hydroxides(LDHs)for salt and organic compound separations

Magnesium(Mg)is a widely used and attractive metal,known for its unique physical and chemical properties,and it has been employed in the manufacture of many practical materials.Layered Double Hydroxides(LDHs),particularly Mg-based LDHs,rank among the most prevalent two-dimensional materials utilized in separation processes,which include adsorption,extraction,and membrane technology.The high popularity of Mg-based LDHs in separation applications can be attributed to their properties,such as excellent hydrophilicity,high surface area,ion exchangeability,and adjustable interlayer space.Currently,polymer membranes play a pivotal role in semi-industrial and industrial separation processes.Consequently,the development of polymer membranes and the mitigation of their limitations have emerged as compelling topics for researchers.Several methods exist to enhance the separation performance and anti-fouling properties of polymer membranes.Among these,incorporating additives into the membrane polymer matrix stands out as a cost-effective,straightforward,readily available,and efficient approach.The use of Mg-based LDHs,either in combination with other materials or as a standalone additive in the polymer membrane matrix,represents a promising strategy to bolster the separation and anti-fouling efficacy of flat sheet mixed matrix polymer membranes.This review highlights Mg-based LDHs as high-potential additives designed to refine flat sheet mixed matrix polymer membranes for applications in wastewater treatment and brackish water desalination.

Nanostructuring of Mg-Based Hydrogen Storage Materials:Recent Advances for Promoting Key Applications

With the depletion of fossil fuels and global warming,there is an urgent demand to seek green,low-cost,and high-efficiency energy resources.Hydrogen has been considered as a potential candidate to replace fossil fuels,due to its high gravimetric energy density(142 MJ kg^(-1)),high abundance(H_(2)O),and environmentalfriendliness.However,due to its low volume density,effective and safe hydrogen storage techniques are now becoming the bottleneck for the"hydrogen economy".Under such a circumstance,Mg-based hydrogen storage materials garnered tremendous interests due to their high hydrogen storage capacity(~7.6 wt%for MgH_(2)),low cost,and excellent reversibility.However,the high thermodynamic stability(ΔH=-74.7 kJ mol^(-1)H_(2))and sluggish kinetics result in a relatively high desorption temperature(>300℃),which severely restricts widespread applications of MgH_(2).Nano-structuring has been proven to be an effective strategy that can simultaneously enhance the ab/de-sorption thermodynamic and kinetic properties of MgH_(2),possibly meeting the demand for rapid hydrogen desorption,economic viability,and effective thermal management in practical applications.Herein,the fundamental theories,recent advances,and practical applications of the nanostructured Mg-based hydrogen storage materials are discussed.The synthetic strategies are classified into four categories:free-standing nano-sized Mg/MgH_(2)through electrochemical/vapor-transport/ultrasonic methods,nanostructured Mg-based composites via mechanical milling methods,construction of core-shell nano-structured Mg-based composites by chemical reduction approaches,and multi-dimensional nano-sized Mg-based heterostructure by nanoconfinement strategy.Through applying these strategies,near room temperature ab/de-sorption(<100℃)with considerable high capacity(>6 wt%)has been achieved in nano Mg/MgH_(2)systems.Some perspectives on the future research and development of nanostructured hydrogen storage materials are also provided.

Hydrogen absorption/desorption cycling performance of Mg-based alloys with in-situ formed Mg_(2)Ni and LaH_(x)(x=2,3)nanocrystallines

Aiming to elucidate the hydrogen absorption/desorption cycling properties of Mg-based alloys with in-situ formed Mg_(2)Ni and LaH_(x)(x=2,3)nanocrystallines,the hydrogen storage cycle stability,hydriding/dehydriding cycling kinetics and thermodynamic stability of the experimental alloys have been investigated in detail.The results show that the Mg-Ni-La alloys exhibit improved hydrogen storage cycling properties and can remain storage hydrogen above 5.5 wt%after 200 cycles.With the increase of cycling numbers,the dehydrogenation rates of the experimental samples increase firstly and then gradually decrease,and eventually maintain relative stable state.Microstructure observation reveals that powders sintering and hydrogen decrepitation both exist during hydrogen absorption/desorption cycles due to repeated volume expansion and contraction.Meanwhile,the in-situ formed LaH_(x)(x=2,3)and Mg_(2)Ni nanocrystallines stabilize the microstructures of the particles and hinder the powders sintering.After 200 cycles,the average particle size of the experimental samples decreases and the specific surface area apparently increases,which leads to the decomposition temperatures of MgH_(2)and Mg_(2)NiH_(4)slightly shift to lower temperatures.Moreover,Mg_(2)Ni and LaH_(x)(x=2,3)have been proven to be stable catalysts during long-term cycling,which can still uniformly distribute within the powders after 200 cycles.

In-situ deposition of apatite layer to protect Mg-based composite fabricated via laser additive manufacturing

Biodegradable magnesium(Mg) and its alloy show huge potential as temporary bone substitute due to the favorable biocompatibility and mechanical compatibility. However, one issue deserves attention is the too fast degradation. In this work, mesoporous bioglass(MBG)with high pore volume(0.59 cc/g) and huge specific surface area(110.78 m^(2)/g) was synthesized using improved sol-gel method, and introduced into Mg-based composite via laser additive manufacturing. Immersion tests showed that the incorporated MBG served as powerful adsorption sites, which promoted the in-situ deposition of apatite by successively adsorbing Ca2+and HPO42-. Such dense apatite film acted as an efficient protection layer and enhanced the corrosion resistance of Mg matrix, which was proved by the electrochemical impedance spectroscopy measurements. Thereby, Mg based composite showed a significantly decreased degradation rate of 0.31 mm/year. Furthermore,MBG also improved the mechanical properties as well as cell behavior. This work highlighted the advantages of MBG in the fabrication of Mg-based implant with enhanced overall performance for orthopedic application.

A comprehensive review on biocompatible Mg-based alloys as temporary orthopaedic implants:Current status,challenges,and future prospects

Mg and its alloys are drawing huge attention since the last two decades as a viable option for temporary implants applications.A commendable progress has already been made in the development of these alloys.The biodegradable nature of Mg,appreciable biocompatibility of elemental Mg,and its close resemblance to natural bone in terms of density and elastic modulus make them highly preferable option amongst other available alternatives in this field.This review article presents an overview covering the recent advancements made in the field of Mg-based biodegradable implants for orthopaedic implant applications.The paper focuses on alloy development and fabrication techniques,the state of the art of important Mg-based alloy systems in terms of their mechanical properties,in-vitro and in-vivo degradation behaviour and cytotoxicity.Further,the paper reviews the current progress achieved in the clinical transition of Mg-based alloys for orthopaedic fixtures.The review also includes the degradation mechanisms of the alloys in physiological environment and highlights the mismatch existing between the rate of bone healing and alloy degradation due to rapid corrosion of the alloys in such environment,which has still restricted their widespread application.Finally,the surface coating techniques available for the alloys as an effective way to reduce the degradation rate are reviewed,followed by a discussion on the future research prospects.

Effect of Heat-Treatment Process on Properties of Rare Earth Mg-Based System Hydrogen Storage Alloys with AB_3-Type

The effect of heat-treatment process on the properties of Mm0.8Mg0.2(NiCoAlMn)3.5 hydrogen storage alloy was discussed . The electrochemical properties such as cycling stability, activation property, and the plateau voltage of the alloy which was heat-treated in various temperatures and times had different changes during the cycle process, the optimum heat-treatment conditions of this alloy were determined by this work.

Study on Nanocrystalline Rare Earth Mg-Based System Hydrogen Storage Alloys with AB_3-Type

A sort of rare earth Mg-based system hydrogen storage alloys with AB3-type was prepared by double-roller rapid quenching method. The alloys were nanocrystalline multi-phase structures composed of LaNi3 phase and LaNi5 phase by X-ray diffraction and scanning electron microscopy analyses, and the suitable absorption/desorption plateau was revealed by the measurement of P-C-I curve. Electrochemical studies indicate that the alloys exhibit good electrochemical properties such as high capacity and stable cycle life, and the discharge capacity is 369 mAh·g-1 at 0.2 C (72 mA·g-1). after 460 cycles, the capacity decay was only 19.4% at 2 C (720 mA·g-1).

Hydrogen storage behavior of Mg-based alloy catalyzed by carbon-cobalt composites

The composites comprised of Co nanoparticle and C nanosheet were prepared though a high-temperature carbonization reaction.The catalysis of Co@C composites on the hydrogen storage behavior of Mg_(90)Ce_(5)Y_(5)alloy was investigated in detail by XRD,SEM,TEM,PCI,and DSC method.Because of the synergistic catalytic function of C and Co in C@Co nanocomposites,the Mg_(90)Ce_(5)Y_(5)alloy with 10 wt.%C@Co shows the excellent hydrogen absorption and desorption performances.Time for releasing hydrogen reduces from 150 min to 11 min with the addition of the C@Co composites at the temperature of 300℃.Meanwhile,the dehydrogenation activation energy also declines from 130.3 to 81.9 kJ mol^(-1)H_(2)after the addition of the C@Co composites.This positive effect attributes to the C layer with the high defect density and the Co nanoparticles,which reduces the energy barriers for the nucleation of Mg/MgH_(2)phase and the recombination of hydrogen molecule.Besides,the C@Co composites also improve the activation property of the Mg_(90)Ce_(5)Y_(5)alloy which was folly activated in the first cycle.Moreover,the temperature for initial dehydrogenation and the endothermic peak of the alloy hydride were also decreased.Although the addition of the C@Co composites increases the plateau pressures and decreases the value of the decomposition enthalpy,these differences are so small that the improvement on thermodynamics can hardly be seen.

Thermodynamic modeling of the La-Mg-Y system and Mg-based alloys database

As an example of the La-Mg-Y system, the method how to set up the themaodynamic model of individual phases was introduced in the process of thermodynamic optimization. The solution phases （liquid, body-centered cubic, face-centered cubic, hexagonal close-packed and double hexagonal close-packed） were modeled with the Redlich-Kister equation. The compound energy model has been used to describe the thermodynamic functions of the intermetallic compounds in the La-Mg-Y systems. The compounds Mg2Y, Mg24Y5, Mg12La, Mg17La2, Mg41Las, Mg3La and Mg2La in the La-Mg-Y system were treated as the formulae （Mg,Y）2（La,Mg,Y）, Mg24（La,Mg,Y）4Y, Mg12（La, Y）, Mg17（La,Y）2, Mg41（La,Y）5, Mg3（La,Mg,Y） and Mg2（La, Y）, respectively. A model （La, Mg,Y）0.5（La,Mg,Y）0.5 was applied to describe the compound MgM formed by MgLa and MgY in order to cope with the order-disorder transition between body-centered cubic solution （A2） and MgM with CsCl-type structure （B2） in the La-Mg-Y system. The Gibbs energies of individual phases were optimized in the La-Mg, La-Y and La-Mg-Y systems by CALPHAD technique. The projection of the liquidus surfaces for the La-Mg-Y system was predicted. The Mg-based alloys database including 36 binary and 15 ternary systems formed by Mg, Al, Cu, Ni, Mn, Zn and rare earth elements was set up in SGTE standard.

3D-cubic interconnected porous Mg-based scaffolds for bone repair

Mg-based porous materials,as potential bone tissue engineering scaffolds,are considered an attractive strategy for bone repair owing to favorable biodegradability,good biocompatibility and suitable mechanical properties.In this work,3D-cubic interconnected porous Mg–xZn–0.3Ca(x=0,3,6)scaffolds were prepared to obtain desirable pore structures with a mean porosity up to 73%and main pore size of 400–500μm,which pore structures were close to the human cancellous bone.The structure–property relationships in the present scaffolds were analyzed by experiments and theoretical models of generalized method of cells(GMC).Mg–xZn–0.3Ca scaffolds exhibited good compression properties with a maximum above 5MPa in yield strength and about 0.4GPa in elastic modulus.This was attributed to not only the alloy strengthening but also the large minimum solid area.On the other hand,the scaffolds showed undesirable and relatively serious degradation behavior in Hank’s solution,resulting from Zn addition in Mg-based scaffolds and the high surface area ratio in the pore structure.Therefore,surface modifications are worth studying for controlled degradation in the future.In conclusion,this research would explore a novel attempt to introduce 3D-cubic pore structure for Mg-based scaffolds,and provide new insights into the preparations of Mg-based scaffolds with good service performances for bone repair.

Thermal stability of nanocrystalline Mg-based alloys prepared via mechanical alloying

Thethermal stability and the kinetics of grain growth of nanocrystalline Mg-6Al-1Zn and Mg-6Al-1Zn-1Si alloys prepared via mechanical alloying were investigated. It started with elemental powders, using a variety of analytical techniques including differential scanning calorimetry （DSC）, X-ray diffraction （XRD）, scanning electron microscopy （SEM）, transmission electron microscopy （TEM） and energy dispersive spectrometry. The kinetics of grain growth in isothermal annealing was investigated. The XRD results show that, although the grain sizes of both material systems increase as the annealing temperature rises, the Si-containing system displays a relatively smaller grain size, i.e., 60 nm compared with 72 nm in Mg-6Al-1Zn system, after being exposed to 350 ℃ for 1 h. The second-phase intermetallic particle Mg2Si formed during the isothermal annealing of Mg-6Al-1Zn-1Si system could influence not only the activation energy but also the exponent of kinetic equation. Higher hardness values obtained in the Si-containing system would be due to the formation of Mg2Si intermetallic phase.

An overview of progress in Mg-based hydrogen storage films

Mg-based hydrogen storage materials are considered to be one of the most promising solid-state hydrogen storage materials due to their large hydrogen storage capacity and low cost. However, slow hydrogen absorption/desorption rate and excessive hydrogen absorption/desorption temperature limit the application of Mg-based hydrogen storage materials.The present paper reviews the advances in the research of Mg-based hydrogen storage film in recent years, including the advantage of the film, the function theory of fabricating method and its functional theory, and the influencing factors in the technological process. The research status worldwide is introduced in detail. By comparing pure Mg, Pd-caped Mg, nonpalladium capped Mg, and Mg alloy hydrogen storage films, an ideal tendency for producing Mg-based film is pointed out,for example, looking for a cheap metal element to replace the high-priced Pd, compositing Mg film with other hydrogen storage alloy of catalytic elements, and so on.

Hydrogen storage properties of ball-milled Mg-based composite with PdCl_2 additive

Mg-25 wt% Mg2Ni composite was prepared by sintered method, hydrided at 613 K and then ball-milled with 1.5 wt% PdC12 additive for 51 h. The effects of PdCl2 on the hydriding and dehydriding behavior of Mg-25 wt% Mg2Ni composite were investigated. The absorption and desorption rate of the composite with PdCl2 is fast and the hydrogen storage capacity is more than that of the composite without PdCl2. The maximum hydrogen storage capacity reached 3.48 wt% at 373 K, and 5.05 wt% H at 453 K, respectively. The improvement of sorption and desorption kinetics is attributed to the catalytic effect of PdCl2, and the grain refining and lattice strain introduced by ball milling.

Development of Mg-based Hydrogen Storage Alloy

Mg-based hydrogen storage alloys are considered as a promising candidate for hydrogen system because of its lightweight, high storage capacity, low price and rich mineral resources. In detail, we reviewed the preparation and properties of Mg-Ni-based hydrogen storage alloys. All kinds of attempts have been done to improve the hydriding and dehydriding behaviors. It is found that the partial substitution of foreign elements can decrease the hydrogen absorption temperature, especially the substitution of a more electronegative element, such as AI and Mn. Mechanical alloying (MA) and mechanical grinding (MG) are the most effective methods to improve the hydriding/dehydriding kinetics and electrochemical capacity, and decrease the desorption temperature. but the corrosion resistance is so poor that the 80% of maximum capacity is lost within ten cycles. Microencapsulation is a useful measurement for improving the corrosion resistance and electrocatalytic activity. fn order to improve the properties of the alloys for practical application, the alloys should have a large number of defects, which give activated sites, subsequently, MA, MG and electroless plating should be used to improve the hydriding/dehydriding kinetics and protect the surface of alloys, respectively. The new composite Mg-based alloys give a new way for the hydrogen storage material to practical application. Furthermore we put forward several problems which will be discussed in future.

Effects of Mg-based Alkaline Peroxide Bleaching on Physical Properties of Poplar Bleached Chemi-thermomechanical Pulp and Its Influence Mechanism

In this study,Mg O was partially used as an alkali source in the peroxide bleaching process of bleached chemi-thermomechanical pulp(BCTMP).The effects of substitution percentage of Mg O for Na OH on the bulk,optical,and physical properties of bleached pulp,and the main effluent characteristics were analyzed.In addition,the influencing mechanism of Mgbased alkali on the strength properties of the BCTMP was further investigated.Strength properties of the BCTMPs were investigated as a function of charge characteristics,fiber morphology,surface lignin content,relative bonding area,and hydrogen bonds of the BCTMP.The results showed that cationic demand(CD) and chemical oxygen demand(COD_(Cr)) of the bleaching effluent decreased as the substitution percentage of Mg O for Na OH increased; meanwhile,the bulk and optical properties of the BCTMP increased.Nevertheless,the strength properties(tensile,tear,and burst indices) of the bleached pulp decreased as the substitution percentage of Mg O for Na OH increased.The decrease in the fiber charge density and increase in the surface lignin content affected the fiber swelling,resulting in a decline in pulp interfibers bonding strength and further loss of the tensile and burst indices.

Shell and shrinking core kinetics model of Mg-based hydrogen storage alloys

The kinetics equation of the Mg-based hydrogen storage alloys (Mg-Ni-MO) was established by the shell and shrinking core model. The total coefficients of the kinetics equation of the hydrogen absorption and desorption process with shell diffusion as the controlling step were determined by semi-empirical and semi-theoretical methods, and the apparent activation energy of the hydrogen absorption process was obtained. The calculation results can well accord with the experimental data, and can well forecast the hydrogen storage capacity and absorption rate at different times. By using the kinetics equation, the effects of temperature and pressure on the hydrogen storage process can also be well understood. The kinetics equation is helpful for the design of the hydrogen storage container.

Effects of carbon nanotubes on hydrogen storage property of Mg-based nanocomposites

Mg-based hydrogen storage nanocomposites added with carbon nanotubes(CNTs) were prepared by mechanical milling under the atmosphere of hydrogen. The results show that because of their own excellent heat conductivity and good hydrogen storage ability, the carbon nanotubes improve the mass transfer and heat transfer properties of the Mg-based nanocomponents, thus enhancing the kinetic property of hydrogen absorption and desorption of the hydrogen storage nanocomposites, and raising the hydrogen storage capacity. Due to the addition of the carbon nanotubes, the milling stress in the process of preparing the Mg-based nanocomposites is reduced, the components can be closely bonded easily, and the additives can play better catalytic roles.

Recent Progress on Electrode Characteristics of Mg and Mg-Based Hydrogen Storage Alloys

Recent development of Mg and Mg-based hydrogen storage alloys used in Ni-MH battery was discussed extensively. The results obtained from recent studies prove that these alloys with nanocrystalline/amorphous structure formed by mechanical alloying (MA) or mechanical grinding (MG) have good electrode characteristics. In general, MA or MG, and elemental substitution alloying are regarded as the effective means to seek new system of Mg-based alloys and nano-composite with improved electrode characteristics. However, until now, the currently known improvement in these electrode characteristics is still far from reach to that required for commercial application.