Effect of TiO_(2) addition on microstructures and properties of Mgo-Cao refractory aggregates

MgO-CaO(40 wt.%CaO)refractory aggregates were prepared using the calcined dolomite and light-burned magnesia fine powder as raw materials and TiO_(2) as additive.The effect of TiO_(2) on their phase composition,microstructures and properties was investigated by X-ray diffraction and scanning electron microscopy.The properties such as bulk density,apparent porosity,relative aggregate tube strength and hydration resistance were also investigated.The results showed that the CaTiO_(3) generated by the reaction between CaO and TiO_(2) was distributed around the CaO grain boundaries and intermittently distributed with MgO,which formed an isolation layer around CaO and greatly improved the hydration resistance.Meanwhile,the introduction of TiO_(2) promoted sintering and increased the grain size,further improving the strengths and hydration resistance of the materials.In addition,the most significant enhancement in the hydration resistance and strengths of the samples was achieved when 1.0-2.0 wt.%TiO_(2) was added.In this case,the relative strength of aggregate increased from 33.3% to 37.3%-43.1%,and the mass gain after the hydration test decreased from 3.13% to 1.26%-1.45%.

Study on Corrosion Mechanism Between MgO-CaO Refractories and Slag

Magnesiu-Calcia materials containing 22 -53 wt% CaO hare been investigated Jot refinery slag corrosion and penetration resistance by Scanning Electron Microscopy （ SEM） .nd XRD. The corrosion and penetration resistance of MgO-CaO materials is enhanced with the increase of CaO content in specimens. It can be explained that, with increase of CaO content, the specimens reacted will＋ slag form higher melting point minerals of C3S ant C2S, creating a dense surface layer, which stopped others from penetrating further. Thus , the corrosion and penetration resistame was improved. No matter what kinds of slag were chosen, the depth of penetration decreased will＋ increase of CaO con,tent.

Corrosion Resistance Mechanism of MgO-CaO Refractories to Refining Slag

Corrosion resistance and penetration resistance of MgO-CaO materials with different CaO contents （22%, 42%, 49%, 53%, in mass）to refining AOD slag or VOD slag were investigated using static crucible technique by visual observation, SEM and XRD. The corrosion resistance and penetration resistance of speci-mens decrease with the increase of CaO content. This may be caused by the formation of C3S and C2S during the reactions between specimens and the slag. The formed C3S and C2S can restrain the further penetration to the matrix. The higher the CaO content, the more the C2S or C3S formed, the lower the porosity of the speci-mens, and the lower the penetration depth and corrosion rate. The corrosion resistance to AOD slag is better than that to VOD slag, because the reaction between AOD slag and the matrix is slighter than that between VOD slag and the matrix.

Sample Preparation for Monolithic Refractories Part 1:Refractory Castables

1 Scope This standard specifies the definition and test methods of flowability of dense and insulating refractory castables, and moulding equipment, moulding methods, curing and drying conditions of castables samples.

Upadacitinib for refractory ulcerative colitis with primary nonresponse to infliximab and vedolizumab:A case report

BACKGROUND Many patients with ulcerative colitis(UC)do not respond well to,or tolerate conventional and biological therapies.There is currently no consensus on the treatment of refractory UC.Studies have demonstrated that the selective Janus kinase 1 inhibitor upadacitinib,a small-molecule drug,is effective and safe for treating UC.However,no studies have revealed that upadacitinib is effective in treating refractory UC with primary nonresponse to infliximab and vedolizumab.CASE SUMMARY We report the case of a 44-year-old male patient with a chief complaint of bloody diarrhoea with mucus and pus,in addition to dizziness.The patient had recurrent disease after receiving mesalazine,prednisone,azathioprine,infliximab and vedolizumab over four years.Based on the endoscopic findings and pathological biopsy,the patient was diagnosed with refractory UC.In particular,the patient showed primary nonresponse to infliximab and vedolizumab.Based on the patient’s history and recurrent disease,we decided to administer upadacitinib.During hospitalisation,the patient was received upadacitinib under our guidance.Eight weeks after the initiation of upadacitinib treatment,the patient’s symptoms and endoscopic findings improved significantly.No notable adverse reactions have been reported to date.CONCLUSION Our case report suggests that upadacitinib may represent a valuable strategy for treating refractory UC with primary nonresponse.

Risk stratification for radioactive iodine refractoriness using molecular alterations in distant metastatic differentiated thyroid cancer

Objective: Patients with radioactive iodine-refractory differentiated thyroid cancer(RAIR-DTC) are often diagnosed with delay and constrained to limited treatment options. The correlation between RAI refractoriness and the underlying genetic characteristics has not been extensively studied.Methods: Adult patients with distant metastatic DTC were enrolled and assigned to undergo next-generation sequencing of a customized 26-gene panel(Thyro Lead). Patients were classified into RAIR-DTC or non-RAIR groups to determine the differences in clinicopathological and molecular characteristics. Molecular risk stratification(MRS) was constructed based on the association between molecular alterations identified and RAI refractoriness, and the results were classified as high, intermediate or low MRS.Results: A total of 220 patients with distant metastases were included, 63.2% of whom were identified as RAIRDTC. Genetic alterations were identified in 90% of all the patients, with BRAF(59.7% vs. 17.3%), TERT promoter(43.9% vs. 7.4%), and TP53 mutations(11.5% vs. 3.7%) being more prevalent in the RAIR-DTC group than in the non-RAIR group, except for RET fusions(15.8% vs. 39.5%), which had the opposite pattern. BRAF and TERT promoter are independent predictors of RAIR-DTC, accounting for 67.6% of patients with RAIR-DTC. MRS was strongly associated with RAI refractoriness(P<0.001), with an odds ratio(OR) of high to low MRS of 7.52 [95%confidence interval(95% CI), 3.96-14.28;P<0.001] and an OR of intermediate to low MRS of 3.20(95% CI,1.01-10.14;P=0.041).Conclusions: Molecular alterations were associated with RAI refractoriness, with BRAF and TERT promoter mutations being the predominant contributors, followed by TP53 and DICER1 mutations. MRS might serve as a valuable tool for both prognosticating clinical outcomes and directing precision-based therapeutic interventions.

Chinese Standards on Refractories Dimensions of Refractory Bricks-Part 1:Specification for General Bricks

1 Scope This standard specifies the terms, definition, di-mension series, size designation representation, dimen-sion standard representation, brick dimension, and di- mension characteristics of general refractory bricks.

Test Method for Refractoriness Under Load of Refractory Products(Non-differential,with Rising Temperature)

This standard specifies the definitions, theory, apparatus, specimens, procedures, test results and disposal, test error and report of test method for refractoriness under load of refractory products （non-differential, with rising temperature）.

Chinese Standards on Refractories Refractory Products-Determination of Abrasion Resistance at Ambient Temperature GB/T 18301-2012

This standard specifies the terms and definitions, theory, apparatus, specimens, test procedures, calcu- lation results, apparatus check and test reports, etc. of abrasion resistance at ambient temperature of refractory products.

Chinese Standards an Refractories Refractory-Ceramic Fiber and the Products

1 Scope This standard specifies the terms, definitions, classifications, brands, technical requirements, test methods, quality appraisal procedure, packing, marking, transportation, storage and quality certificate of ceramic fiher and the products.

Corrosion behavior of co-gasification slag of furfural residue and coal on alumina-silica refractories

Gasification of furfural residue with coal can realize its efficient and clean utilization.But the high alkali metal content in furfural slag is easy to cause the corrosion of gasifier refractory.Two gasification coals with different silica alumina ratio and a furfural residue were selected in the study.The effects of furfural residue additions on corrosion of silica brick,corundum brick,high alumina brick and mullite brick were investigated by using XRD,SEM-EDS and Factsage Software,and the corrosion mechanism was analyzed.With increasing furfural residue addition,the permeability of the slags to high-aluminium-bearing refractories first decreases and then increases,while the permeability on silica brick shows a slight decrease trend.Leucite(KAlSi_(2)O_(6))with high-melting temperature is generated from the reaction of K_(2)O and SiO_(2)in slag with Al_(2)O_(3)in refractories after furfural residue is added,which hinders the infiltration of slag in refractories.Kaliophilite(KAlSiO_(4))of low-melting point is formed when K_(2)O content increases,and this contributes to the infiltration of slag in refractories.The acid-base reaction between slag and silica brick is distinctly occurred,more slag reacts with SiO_(2)in the silicon brick,resulting in a decrease in the amount of slag infiltrating into the silicon brick as furfural residue is added.The corrosion of silica brick is mainly caused by the acid-base reaction,while the corrosion of three alumina based refractory bricks of corundum,mullite and high alumina brick is determined by slag infiltration.A linear correlation between the percolation rate and slag viscosity is established,the slag permeability increases with decreasing viscosity,resulting in stronger permeability for the high Si/Al ratio slag with lower viscosity.

Investigation of Microstructure and Phase Composition of Chromic Oxide, AZS/Cr and High-alumina Refractories after Exposure of Basalt and Aluminaboronsilicate Glasses Melts

The microstructure and phase composition of high-alumina,chromic oxide,and AZS/Cr refractories containing 30%and 60%(by mass)Cr_(2)O_(3) after exposure to aluminaboronsilicate glasses and basalt melts depending on the type of melts and temperature have been studied.The mechanisms of refractory corrosion by the used melts and the factors contributing to the inhibition of corrosion development have been investigated by the method of petrographic analysis.On the basis of obtained results,the use of high-alumina,chromic oxide,and AZS/Cr refractories in the sections of glass furnace linings,experiencing the intensive impact of aluminaboronsilicate glasses and basalt melts,has been confirmed and scientifically substantiated.

Refractory ulcerative colitis:Upadacitinib versus other biologics

In this editorial we comment on an article published in World Journal of Clinical Cases in 2024,in which a case of refractory ulcerative colitis(UC)was discussed based on the response to different lines of biologics.Different studies showed that different classes of biologics have their advantages and disadvantages in the treatment of refractory UC.Certain classes are superior to others and if tried earlier on would lead to a possible change in the outcome.

Dexamethasone implant in naive versus refractory patients with diabetic macular edema:a Meta-analysis

AIM:To evaluate the efficacy and safety of the intravitreal dexamethasone implant in naive and refractory patients with diabetic macular edema(DME).METHODS:PubMed,Embase,Web of Science,and Medline databases were searched.The main outcomes were best-corrected visual acuity(BCVA)and central retinal thickness(CRT).The secondary outcomes included mean number of injections,intraoperative or postoperative complications including intraocular pressure(IOP)elevation and cataract.RESULTS:Ten comparative studies involving a total of 1000 DME eyes including 402 naive eyes and 598 refractory eyes were selected.The postoperative BCVA in the naive group was significantly better than in the refractory group[mean difference(MD)-0.11,95% confidence interval(CI)-0.17 to-0.05,P=0.0003;MD 8.69,95%CI 5.08 to 12.30,P<0.00001].Additionally,the naive group got greater improvement of BCVA change as well as more gains of BCVA letters than the refractory group[MD 7.71,95%CI 2.02 to 13.40,P=0.008;odds ratio(OR)2.99,95%CI 2.05 to 4.37,P<0.00001].The subgroup analysis revealed that the naive group had significantly higher BCVA gains of≥5,≥10,and≥15 letters compared to the refractory group(P=0.002,0.0001,0.003,respectively).No significant difference was detected between the two groups in either postoperative CRT(MD-22.36,95%CI-46.39 to 1.66,P=0.07)or the overall mean number of injections(MD-0.08,95%CI-0.38 to 0.22,P=0.61).Intraoperative and postoperative complications including the elevation of IOP(OR 0.47,95%CI 0.20 to 1.13,P=0.09)and cataract(OR 1.78,95%CI 0.97 to 3.24,P=0.06)showed no significant differences between the two groups during the follow-up time.CONCLUSION:Intravitreal dexamethasone implants for DME can improve anatomical and functional outcomes in both naive and refractory eyes and have a well-acceptable safety profile.Moreover,naive eyes maintain better visual outcomes than refractory eyes.It provides further evidence of better visual response when used for naive eyes as firstline therapy.

Investigation of Refractory Bricks and Oxide Materials Heated in Hydrogen Reduction Conditions

This study aims to provide the basic knowledge for furnace refractory design by investigating refractory property changes occurred in a hydrogen atmosphere.Since refractory bricks are thermodynamically stable in a hydrogen atmosphere at 1100°C,we tried to find out the minute changes.In this experiment,a refractory brick was prepared by andalusite,mullite chamotte,and clay as raw materials and heated to 1100°C in a 100%hydrogen atmosphere for 72 h.It was found that the strength of the brick was decreased and the color was changed to black by the reduction of impurities.And in addition,this study covered research on the slaking risk of MgO raw materials because the minimum temperature is expected to 400°C in fluidized reduction furnaces unlike shaft furnaces.

Spark plasma sintering of tungsten-based WTaVCr refractory high entropy alloys for nuclear fusion applications

W-based WTaVCr refractory high entropy alloys (RHEA) may be novel and promising candidate materials for plasma facing components in the first wall and diverter in fusion reactors. This alloy has been developed by a powder metallurgy process combining mechanical alloying and spark plasma sintering (SPS). The SPSed samples contained two phases, in which the matrix is RHEA with a body-centered cubic structure, while the oxide phase was most likely Ta2VO6through a combined analysis of X-ray diffraction (XRD),energy-dispersive spectroscopy (EDS), and selected area electron diffraction (SAED). The higher oxygen affinity of Ta and V may explain the preferential formation of their oxide phases based on thermodynamic calculations. Electron backscatter diffraction (EBSD) revealed an average grain size of 6.2μm. WTaVCr RHEA showed a peak compressive strength of 2997 MPa at room temperature and much higher micro-and nano-hardness than W and other W-based RHEAs in the literature. Their high Rockwell hardness can be retained to at least 1000°C.

The 9^(th) International Symposium on Refractories

Organizedby The Chinese Society for Metals The Chinese Ceramic Society Sinosteel Luoyang Institute of Refractories Research Co.,Ltd.Sponsored by Refractories Committee of The Chinese Society for Metals Sinosteel Luonai Materials Technology Corporation Co-Sponsoredby State Key Laboratory of Advanced Refractories The State Key Laboratory of Refractories and Metallurgy Refractories Press Indian Refractory Makers Association The Federation for International Refractory Research and Education.

Glaucoma drainage device implantation and cyclophotocoagulation in the management of refractory glaucoma after Descemet-stripping automated endothelial keratoplasty

AIM:To compare the surgical outcomes of glaucoma drainage device implantation(GDI)and trans-scleral neodymium:YAG cyclophotocoagulation(CPC)in the management of refractory glaucoma after Descemetstripping automated endothelial keratoplasty(DSAEK).METHODS:This retrospective study on observational case series enrolled 29 patients who underwent DSAEK and posterior anti-glaucoma surgery(15 with GDI and 14 with CPC).The main outcome measures were intraocular pressure(IOP),glaucoma surgery success rate(defined as IOP of 6–21 mm Hg without additional anti-glaucoma operation),number of glaucoma medications,endothelial graft status,and best-corrected visual acuity(BCVA).RESULTS:The mean follow-up time was 34.1 and 21.0mo for DSAEK or glaucoma surgeries,both for the GDI and CPC groups.Both groups showed significant IOP reduction after glaucoma surgery.The GDI group presented a significantly higher success rate in IOP control than the CPC group(60%vs 21.4%,P=0.03).Both procedures significantly decreased the number of glaucoma medications(P=0.03).Forty percent and 57%of cases in the GDI and the CPC group,respectively,experienced endothelial graft failure during follow-up(P=0.36).Significantly worse BCVA after surgery was observed in the CPC group but not in the GDI group.CONCLUSION:Both GDI and CPC significantly decrease IOP in eyes with glaucoma after DSAEK.GDI is preferable to CPC in refractory glaucoma cases after DSAEK,as it manifests a significantly higher success rate for IOP control,similar endothelial graft failure rate,and relatively preserves BCVA than CPC.

The Role of the Size Effect on the Drying of Refractory Castables—How Its Under-standing Could Narrow the Gap between Laboratory Studies and Industrial Reality

Refractories have unique capabilities such as sustaining their shape and properties at extreme conditions such as the combination of high temperatures and thermal shock,contact with molten metals and slags and in some circumstances resistance to erosion from abrasive particles.Given the large processing output of the heavy industries such as the cement and steel ones which both require high temperature processes,the refractories structures span various meters and weight of several tons.As the water removal stage of hydraulic bonded castables in industrial sites takes hours(10-60 h)due to the risk of explosive spalling,efforts to mitigate it are commonly studied.This has provided theoretical understanding of the general aspects of drying and important tools,such as the thermogravimetry analysis(TGA),for the design of refractory compositions with higher explosive spalling resistance.However,the optimization of this process is still far from the industrial reality especially because the actual linings that require the drying are orders of magnitude larger than the samples considered in the laboratory tests.Therefore,this study proposed the analysis of the sample volume effect on the water removal dynamics through TGA of high alumina castables with calcium aluminate cement.Conventionalφ5 cm×5 cm cylindrical samples were assessed in a laboratory scale equipment whereas macro TGA were carried out considering 20 cm×20 cm×20 cm and 30 cm×30 cm×30 cm cubic samples.Additionally,the effect of polymeric fibers was also considered.It was found out that the different thermal gradients within the macro TGA samples resulted in an inflection on the sample’s heating rate and that the mass loss was affected by the volume considered,especially for the composition without additives.These findings highlight the requirement of carefully taking into consideration the different dimensional sizes and thermal gradients in the samples when analyzing and interpreting the laboratory studies,and especially when trying to extrapolate such results to the industrial reality.

纳米Cr_(2)O_(3)对MgO-CaO材料抗低碱度渣侵蚀影响研究

镁钙系耐火材料因具有耐火度高、热力学性质稳定、能净化钢液等优良性质,被认为是炉外精炼设备的理想炉衬材料,但在实际冶炼过程中因长期受低碱度渣侵蚀,熔损严重。为提高MgO-CaO体系抗低碱度渣侵蚀,本文以轻烧白云石粉和轻烧氧化镁粉为主要原料,添加不同含量的纳米Cr_(2)O_(3)(0.5%、1.0%、1.5%、2.0%、2.5%和3.0%,质量分数),经混合、成型后于1650℃×3 h烧成,进行低碱度渣(m(CaO)∶m(SiO_(2))=1∶1)侵蚀试验,采用XRD表征烧后试样的物相组成和SEM表征侵蚀后试样的显微结构。结果表明:少量纳米Cr_(2)O_(3)的加入会固溶到CaO和MgO晶粒中引起晶格畸变,促进烧结,当纳米Cr_(2)O_(3)的加入量超过2.5%时,纳米Cr_(2)O_(3)会与CaO和MgO生成CaCr_(2)O_(4)和MgCr_(2)O_(4),填充在晶粒的晶界等部位,改变试样的显微结构,显著提升其抗侵蚀性能。