Cutting performance of micro-textured PCBN tool

To study the efect of micro-texture on the cutting performance of polyrystalline cubic boron nitide(PCBN)tools,five types of micro-textures(circular pits,eliptical grooves,transverse grooves,composite grooves,and wavy grooves)were applied to the rake surface of PCBN tools by an optical fber laser marking machine.Through a combination of three dimensional cutting simulations and experiments,the influences of micro-texture on chip-tool contact area,cutting force,chip morphology,shear angle,and surface roughness during the cuting process were analyzed.The results indicated that the chip--tool contact area and cutting force of both non-textured and micro textured tools increased with increasing cutting speed,while the shear angle decreased with increasing cutting speed.The chip-tool contact area and cutting force of the five types of micro-textured tools were smaller than those of the non textured tool The chip-tool contact area and cutting force obtained by the wavy-groove micro textured tool were the smallest.The chip radius produced by the five types of micro-textured tools was smaller than that produced by the non-textured tool,and the chip morphology was more stable.The transverse-groove micro-textured tool had a better chip breaking efect.The chip rnadius generated by the lliptical groove micro textured tool was 0.96 cm,while that generated by the wavy-groove tool varied from 0.55 cm to 1.26 cm.The presence of a micro-texture reduced the surface roughness of the workpiece by 11.73%-56.7%.Under the same cutting conditions,the five types of micro-textured tools gave a smaller chip--tool contact area,cutting force,chip radius,and surface roughness and a larger shear angle than the non-textured tool.In addition,the elliptical groove and wavy-groove micro-textured tools had better cuting performance.

Coupling effect of micro-textured tools and cooling conditions on the turning performance of aluminum alloy 6061

Micro-texturing has been widely proven to be an effective technology for achieving sustainable machining.However,the performance of micro-textured tools under different cooling conditions,especially their coupling effect on machined surface integrity,was scarcely reported.In this paper,the non-textured,linear micro-grooved,and curvilinear micro-grooved inserts were used to turn aluminum alloy 6061 under dry,emulsion,and liquid nitrogen cryogenic cooling conditions.The coupling effects of different micro-textures and cooling conditions on cutting force,cutting temperature,and machined surface integrity,including the surface roughness,work hardening,and residual stress,were revealed and discussed in detail.Results indicated that the micro-grooved tools,especially the curvilinear micro-grooved tools,not only reduced the cutting force and cutting temperature,but also improved the machined surface integrity.In addition,the micro-grooved tools can cooperate with the emulsion or liquid nitrogen to reduce the cutting force,cutting temperature,and improve the machined surface integrity generally,although the combination of emulsion cooling condition and micro-grooved tools generated negative coupling effects on cutting forces and surface work hardening.Especially,the combination of curvilinear micro-grooved cutting tools and cryogenic cooling condition resulted in the lowest cutting force and cutting temperature,which generated the surface with low roughness,weak work hardening,and compressive residual stress.

基于Ladybug Tools对日光温室的方位角与光照模拟

日光温室是重要的农业基础设施,温室的方位角是评判温室结构设计是否合理的基础之一。选择较好的温室方位角拥有更优的采光性能是本文研究的意义。为此,选择三维可视化技术模拟分析日光温室的光照值,为更好地研究分析日光温室采光性能及光照变化提供较为直观的途径和方法,为优化设计高产、高效、节能的日光温室提供一定的辅助作用。通过实测数据和模拟数据的对比,说明Ladybug Tools软件模拟不同方位角的变化及和田日光温室的光照的对比准确度较高,误差不超过5%,为研究日光温室在光照方面的设计提供了一定的理论依据和参考。

Grain size and surface micro-texture characteristics and their paleoenvironmental significance of Holocene sediment in southern margin of the Gurbantunggut Desert,China

The southern margin of the Gurbantunggut Desert,China,is characterized by alternating layers of aeolian and alluvial deposits.Investigating the characteristics of arenaceous sediment in this area is of significant importance for understanding the interactive processes of wind and water forces,as well as the provenance of sediment.However,there are relatively few investigations on the characteristics of such sediment at present.In this study,we researched three aeolian-alluvial interactive stratigraphic profiles and different types of surface sediment on the desert-oasis transitional zone of southern margin of the Gurbantunggut Desert.Based on the optically stimulated luminescence(OSL)dating of aeolian sand and analyses of quartz sand grain size and surface micro-texture,we explored the aeolian-alluvial environmental change at southern margin of the desert in Holocene,as well as the provenance of sediment.The results indicated that the grain size characteristics of different types of sediment in the stratigraphic profiles were similar to those of modern dune sand,interdune sand,muddy desert surface soil,and riverbed sand.Their frequency curves were unimodal or bimodal,and cumulative probability curves were two-segment or three-segment,mainly composed of suspension load and saltation load.The quartz sand in the sediment at southern margin of the desert had undergone alternating transformation of various exogenic forces,with short transportation distance and time,and sedimentary environment was relatively humid.In Holocene,southern margin of the desert primarily featured braided river deposits,and during intermittent period of river activity,there were also aeolian deposits such as sand sheet deposits,stabilized dune deposits,and mobile dune deposits.The provenance for Holocene alluvial deposits at southern margin of the desert remains relatively constant,with the debris of the Tianshan Mountains being the primary provenance.Aeolian sand is mainly near-source recharge,which is formed by in situ deposition of fluvial or lacustrine materials in southern margin of the desert transported by wind erosion,and its provenance was still the weathered debris of the Tianshan Mountains.In addition,the sand in interior of the desert may be transported by northwest wind in desert-scale,thus affecting the development of dunes in southern margin of the desert.The results of this study provide a reference for understanding the composition and provenance changes of desert sand in the context of global climate change.

Nutritional Assessment Tools for Patients with Cancer:A Narrative Review

Cancer patients are at high risk of malnutrition,which can lead to adverse health outcomes such as prolonged hospitalization,increased complications,and increased mortality.Accurate and timely nutritional assessment plays a critical role in effectively managing malnutrition in these patients.However,while many tools exist to assess malnutrition,there is no universally accepted standard.Although different tools have their own strengths and limitations,there is a lack of narrative reviews on nutritional assessment tools for cancer patients.To address this knowledge gap,we conducted a non-systematic literature search using PubMed,Embase,Web of Science,and the Cochrane Library from their inception until May 2023.A total of 90 studies met our selection criteria and were included in our narrative review.We evaluated the applications,strengths,and limitations of 4 commonly used nutritional assessment tools for cancer patients:the Subjective Global Assessment(SGA),Patient-Generated Subjective Global Assessment(PG-SGA),Mini Nutritional Assessment(MNA),and Global Leadership Initiative on Malnutrition(GLIM).Our findings revealed that malnutrition was associated with adverse health outcomes.Each of these 4 tools has its applications,strengths,and limitations.Our findings provide medical staff with a foundation for choosing the optimal tool to rapidly and accurately assess malnutrition in cancer patients.It is essential for medical staff to be familiar with these common tools to ensure effective nutritional management of cancer patients.

Digital Twin Modeling Enabled Machine Tool Intelligence:A Review

Machine tools,often referred to as the“mother machines”of the manufacturing industry,are crucial in developing smart manufacturing and are increasingly becoming more intelligent.Digital twin technology can promote machine tool intelligence and has attracted considerable research interest.However,there is a lack of clear and systematic analyses on how the digital twin technology enables machine tool intelligence.Herein,digital twin modeling was identified as an enabling technology for machine tool intelligence based on a comparative study of the characteristics of machine tool intelligence and digital twin.The review then delves into state-of-the-art digital twin modelingenabled machine tool intelligence,examining it from the aspects of data-based modeling and mechanism-data dual-driven modeling.Additionally,it highlights three bottleneck issues facing the field.Considering these problems,the architecture of a digital twin machine tool(DTMT)is proposed,and three key technologies are expounded in detail:Data perception and fusion technology,mechanism-data-knowledge hybrid-driven digital twin modeling and virtual-real synchronization technology,and dynamic optimization and collaborative control technology for multilevel parameters.Finally,future research directions for the DTMT are discussed.This work can provide a foundation basis for the research and implementation of digital-twin modeling-enabled machine tool intelligence,making it significant for developing intelligent machine tools.

Novel Batch Polishing Method of Ceramic Cutting Inserts for Reducing Tool Wear

Ceramic cutting inserts are a type of cutting tool commonly used in high-speed metal cutting applications.However,the wear of these inserts caused by friction between the workpiece and cutting inserts limits their overall effectiveness.In order to improve the tool life and reduce wear,this study introduces an emerging method called magnetic field-assisted batch polishing(MABP)for simultaneously polishing multiple ceramic cutting inserts.Several polishing experiments were conducted under different conditions,and the wear characteristics were clarified by cutting S136H steel.The results showed that after 15 min of polishing,the surface roughness at the flank face,edge,and nose of the inserts was reduced to below 2.5 nm,6.25 nm,and 45.8 nm,respectively.Furthermore,the nose radii of the inserts did not change significantly,and there were no significant changes in the weight percentage of elements before and after polishing.Additionally,the tool life of the batch polished inserts was found to be up to 1.75 times longer than that of unpolished inserts.These findings suggest that the MABP method is an effective way to mass polish ceramic cutting inserts,resulting in significantly reduced tool wear.Furthermore,this novel method offers new possibilities for polishing other tools.

基于IT Tools平台的高中信息技术深度学习实践研究

It Tools平台是一个建立在网络上的信息技术教学辅助平台,教师和学生都可以通过这一平台进行学习,当前这一平台在教育教学中已经取得一定应用效果。本次阐述了基于It Tools平台的高中信息技术教学,以“编程计算”单元教学为例分析了基于It Tools平台的高中信息技术深度学习实践策略。

SCtool:识别复杂性状和疾病间遗传关联的工具

识别复杂性状和疾病间遗传关联可以提供有用的病因学见解,并有助于确定可能的因果关系的优先级。尽管已有很多工具可以实现复杂性状和疾病间遗传关联,但是某些工具代码可读性差、并且不同工具基于不同的计算机语言、工具间的串联性较差。因此,本研究基于全基因组关联研究(GWAS)数据,提出了SCtool,一个开源、跨平台和用户友好的软件工具。SCtool整合了ldsc,TwosampleMR和MR-BMA三种软件,其主要功能是基于GWAS汇总水平的数据,识别复杂性状和疾病、复杂性状和复杂性状以及疾病与疾病间的遗传相关性并探究其间潜在的因果关联。最后,使用SCtool揭示了全身性铁状态(铁蛋白,血清铁,转铁蛋白,转铁蛋白饱和度)与表观遗传时钟GrimAge之间的遗传关联。

On dry machining of AZ31B magnesium alloy using textured cutting tool inserts

Magnesium alloys have many advantages as lightweight materials for engineering applications,especially in the fields of automotive and aerospace.They undergo extensive cutting or machining while making products out of them.Dry cutting,a sustainable machining method,causes more friction and adhesion at the tool-chip interface.One of the promising solutions to this problem is cutting tool surface texturing,which can reduce tool wear and friction in dry cutting and improve machining performance.This paper aims to investigate the impact of dimple textures(made on the flank face of cutting inserts)on tool wear and chip morphology in the dry machining of AZ31B magnesium alloy.The results show that the cutting speed was the most significant factor affecting tool flank wear,followed by feed rate and cutting depth.The tool wear mechanism was examined using scanning electron microscope(SEM)images and energy dispersive X-ray spectroscopy(EDS)analysis reports,which showed that at low cutting speed,the main wear mechanism was abrasion,while at high speed,it was adhesion.The chips are discontinuous at low cutting speeds,while continuous at high cutting speeds.The dimple textured flank face cutting tools facilitate the dry machining of AZ31B magnesium alloy and contribute to ecological benefits.

Geometric Error Identification of Gantry-Type CNC Machine Tool Based on Multi-Station Synchronization Laser Tracers

Laser tracers are a three-dimensional coordinate measurement system that are widely used in industrial measurement.We propose a geometric error identification method based on multi-station synchronization laser tracers to enable the rapid and high-precision measurement of geometric errors for gantry-type computer numerical control(CNC)machine tools.This method also improves on the existing measurement efficiency issues in the single-base station measurement method and multi-base station time-sharing measurement method.We consider a three-axis gantry-type CNC machine tool,and the geometric error mathematical model is derived and established based on the combination of screw theory and a topological analysis of the machine kinematic chain.The four-station laser tracers position and measurement points are realized based on the multi-point positioning principle.A self-calibration algorithm is proposed for the coordinate calibration process of a laser tracer using the Levenberg-Marquardt nonlinear least squares method,and the geometric error is solved using Taylor’s first-order linearization iteration.The experimental results show that the geometric error calculated based on this modeling method is comparable to the results from the Etalon laser tracer.For a volume of 800 mm×1000 mm×350 mm,the maximum differences of the linear,angular,and spatial position errors were 2.0μm,2.7μrad,and 12.0μm,respectively,which verifies the accuracy of the proposed algorithm.This research proposes a modeling method for the precise measurement of errors in machine tools,and the applied nature of this study also makes it relevant both to researchers and those in the industrial sector.

A Systematic Review and Performance Evaluation of Open-Source Tools for Smart Contract Vulnerability Detection

With the rise of blockchain technology,the security issues of smart contracts have become increasingly critical.Despite the availability of numerous smart contract vulnerability detection tools,many face challenges such as slow updates,usability issues,and limited installation methods.These challenges hinder the adoption and practicality of these tools.This paper examines smart contract vulnerability detection tools from 2016 to 2023,sourced from the Web of Science(WOS)and Google Scholar.By systematically collecting,screening,and synthesizing relevant research,38 open-source tools that provide installation methods were selected for further investigation.From a developer’s perspective,this paper offers a comprehensive survey of these 38 open-source tools,discussing their operating principles,installation methods,environmental dependencies,update frequencies,and installation challenges.Based on this,we propose an Ethereum smart contract vulnerability detection framework.This framework enables developers to easily utilize various detection tools and accurately analyze contract security issues.To validate the framework’s stability,over 1700 h of testing were conducted.Additionally,a comprehensive performance test was performed on the mainstream detection tools integrated within the framework,assessing their hardware requirements and vulnerability detection coverage.Experimental results indicate that the Slither tool demonstrates satisfactory performance in terms of system resource consumption and vulnerability detection coverage.This study represents the first performance evaluation of testing tools in this domain,providing significant reference value.

Selection of media tools for community planning:A study from the perspective of communicative planning

In community planning,due to the lack of evidence regarding the selection of media tools,this study examines how a common but differentiated ideal speech situation can be created as well as how more appropriate media tools can be defined and selected in the community planning process.First,this study describes the concept and theoretical basis of media used in community planning from the perspectives of the multiple effects of media evolution on communicative planning.Second,the classification criteria and typical characteristics of media tools used to support community planning are clarified from three dimensions:acceptability,cost effectiveness,and applicability.Third,strategies for applying media tools in the four phases of communicative planning-namely,state analysis,problem identification,contradictory solution and optimization-are described.Finally,trends in the development of media tools for community planning are explored in terms of multistakeholder engagement,supporting scientific decision-making and multiple-type media integration.The results provide a reference for developing more inclusive,effective,and appropriate media tools for enhancing decision-making capacity and modernizing governance in community planning and policy-making processes.

Research Progress of Measuring Tools for Patient Medication Compliance

This paper introduced the content, compilation process, reliability and validity, scoring method of the evaluation tool for patients’ medication compliance at home and abroad, and reviewed the research progress of the tool. The evaluation method, dimension, scoring method, evaluation content and application scope of the tool were compared, so as to provide reference for nurses to comprehensively and accurately evaluate patients’ medication status.

Phosphorylated protein chip combined with artificial intelligence tools for precise drug screening

We have developed a protein array system,named"Phospho-Totum",which reproduces the phosphorylation state of a sample on the array.The protein array contains 1471 proteins from 273 known signaling pathways.According to the activation degrees of tyrosine kinases in the sample,the corresponding groups of substrate proteins on the array are phosphorylated under the same conditions.In addition to measuring the phosphorylation levels of the 1471 substrates,we have developed and performed the artificial intelligence-assisted tools to further characterize the phosphorylation state and estimate pathway activation,tyrosine kinase activation,and a list of kinase inhibitors that produce phosphorylation states similar to that of the sample.The Phospho-Totum system,which seamlessly links and interrogates the measurements and analyses,has the potential to not only elucidate pathophysiological mechanisms in diseases by reproducing the phosphorylation state of samples,but also be useful for drug discovery,particularly for screening targeted kinases for potential drug kinase inhibitors.

A review on the multi-scaled structures and mechanical/thermal properties of tool steels fabricated by laser powder bed fusion additive manufacturing

The laser powder bed fusion(LPBF) process can integrally form geometrically complex and high-performance metallic parts that have attracted much interest,especially in the molds industry.The appearance of the LPBF makes it possible to design and produce complex conformal cooling channel systems in molds.Thus,LPBF-processed tool steels have attracted more and more attention.The complex thermal history in the LPBF process makes the microstructural characteristics and properties different from those of conventional manufactured tool steels.This paper provides an overview of LPBF-processed tool steels by describing the physical phenomena,the microstructural characteristics,and the mechanical/thermal properties,including tensile properties,wear resistance,and thermal properties.The microstructural characteristics are presented through a multiscale perspective,ranging from densification,meso-structure,microstructure,substructure in grains,to nanoprecipitates.Finally,a summary of tool steels and their challenges and outlooks are introduced.

Emerging molecules,tools,technology,and future of surgical knife in gastroenterology

The 21^(st) century has started with several innovations in the medical sciences,with wide applications in health care management.This development has taken in the field of medicines(newer drugs/molecules),various tools and technology which has completely changed the patient management including abdominal surgery.Surgery for abdominal diseases has moved from maximally invasive to minimally invasive(laparoscopic and robotic)surgery.Some of the newer medicines have its impact on need for surgical intervention.This article focuses on the development of these emerging molecules,tools,and technology and their impact on present surgical form and its future effects on the surgical intervention in gastroenterological diseases.

Tool Wear State Recognition with Deep Transfer Learning Based on Spindle Vibration for Milling Process

The wear of metal cutting tools will progressively rise as the cutting time goes on. Wearing heavily on the toolwill generate significant noise and vibration, negatively impacting the accuracy of the forming and the surfaceintegrity of the workpiece. Hence, during the cutting process, it is imperative to continually monitor the tool wearstate andpromptly replace anyheavilyworn tools toguarantee thequality of the cutting.The conventional tool wearmonitoring models, which are based on machine learning, are specifically built for the intended cutting conditions.However, these models require retraining when the cutting conditions undergo any changes. This method has noapplication value if the cutting conditions frequently change. This manuscript proposes a method for monitoringtool wear basedonunsuperviseddeep transfer learning. Due to the similarity of the tool wear process under varyingworking conditions, a tool wear recognitionmodel that can adapt to both current and previous working conditionshas been developed by utilizing cutting monitoring data from history. To extract and classify cutting vibrationsignals, the unsupervised deep transfer learning network comprises a one-dimensional (1D) convolutional neuralnetwork (CNN) with a multi-layer perceptron (MLP). To achieve distribution alignment of deep features throughthe maximum mean discrepancy algorithm, a domain adaptive layer is embedded in the penultimate layer of thenetwork. A platformformonitoring tool wear during endmilling has been constructed. The proposedmethod wasverified through the execution of a full life test of end milling under multiple working conditions with a Cr12MoVsteel workpiece. Our experiments demonstrate that the transfer learning model maintains a classification accuracyof over 80%. In comparisonwith the most advanced tool wearmonitoring methods, the presentedmodel guaranteessuperior performance in the target domains.

Numerical Investigation of Thermal Behavior of CNC Machine Tool and Its Effects on Dimensional Accuracy of Machined Parts

The dimensional accuracy of machined parts is strongly influenced by the thermal behavior of machine tools (MT). Minimizing this influence represents a key objective for any modern manufacturing industry. Thermally induced positioning error compensation remains the most effective and practical method in this context. However, the efficiency of the compensation process depends on the quality of the model used to predict the thermal errors. The model should consistently reflect the relationships between temperature distribution in the MT structure and thermally induced positioning errors. A judicious choice of the number and location of temperature sensitive points to represent heat distribution is a key factor for robust thermal error modeling. Therefore, in this paper, the temperature sensitive points are selected following a structured thermomechanical analysis carried out to evaluate the effects of various temperature gradients on MT structure deformation intensity. The MT thermal behavior is first modeled using finite element method and validated by various experimentally measured temperature fields using temperature sensors and thermal imaging. MT Thermal behavior validation shows a maximum error of less than 10% when comparing the numerical estimations with the experimental results even under changing operation conditions. The numerical model is used through several series of simulations carried out using varied working condition to explore possible relationships between temperature distribution and thermal deformation characteristics to select the most appropriate temperature sensitive points that will be considered for building an empirical prediction model for thermal errors as function of MT thermal state. Validation tests achieved using an artificial neural network based simplified model confirmed the efficiency of the proposed temperature sensitive points allowing the prediction of the thermally induced errors with an accuracy greater than 90%.

Further Analysis of Machine Tool Dimensional Accuracy and Thermal Stability under Varying Floor Temperature

Machining is as old as humanity, and changes in temperature in both the machine’s internal and external environments can be of great concern as they affect the machine’s thermal stability and, thus, the machine’s dimensional accuracy. This paper is a continuation of our earlier work, which aimed to analyze the effect of the internal temperature of a machine tool as the machine is put into operation and vary the external temperature, the machine floor temperature. Some experiments are carried out under controlled conditions to study how machine tool components get heated up and how this heating up affects the machine’s accuracy due to thermally induced deviations. Additionally, another angle is added by varying the machine floor temperature. The parameters mentioned above are explored in line with the overall thermal stability of the machine tool and its dimensional accuracy. A Robodrill CNC machine tool is used. The CNC was first soaked with thermal energy by gradually raising the machine floor temperature to a certain level before putting the machine in operation. The machine was monitored, and analytical methods were deplored to evaluate thermal stability. Secondly, the machine was run idle for some time under raised floor temperature before it was put into operation. Data was also collected and analyzed. It is observed that machine thermal stability can be achieved in several ways depending on how the above parameters are joggled. This paper, in conclusion, reinforces the idea of machine tool warm-up process in conjunction with a carefully analyzed and established machine floor temperature variation for the approximation of the machine tool’s thermally stability to map the long-time behavior of the machine tool.