The deteriorated degradation resistance of Mg alloy microtubes for vascular stent under the coupling effect of radial compressive stress and dynamic medium

The degradation of Mg alloys relates to the service performance of Mg alloy biodegradable implants.In order to investigate the degradation behavior of Mg alloys as vascular stent materials in the near service environment,the hot-extruded fine-grained Mg-Zn-Y-Nd alloy microtubes,which are employed to manufacture vascular stents,were tested under radial compressive stress in the dynamic Hanks'Balanced Salt Solution(HBSS).The results revealed that the high flow rate accelerates the degradation of Mg alloy microtubes and its degradation is sensitive to radial compressive stress.These results contribute to understanding the service performance of Mg alloys as vascular stent materials.

Molecular dynamics simulation of the flow mechanism of shear-thinning fluids in a microchannel

Shear-thinning fluids have been widely used in microfluidic systems,but their internal flow mechanism is still unclear.Therefore,in this paper,molecular dynamics simulations are used to study the laminar flow of shear-thinning fluid in a microchannel.We validated the feasibility of our simulation method by evaluating the mean square displacement and Reynolds number of the solution layers.The results show that the change rule of the fluid system's velocity profile and interaction energy can reflect the shear-thinning characteristics of the fluids.The velocity profile resembles a top-hat shape,intensifying as the fluid's power law index decreases.The interaction energy between the wall and the fluid decreases gradually with increasing velocity,and a high concentration of non-Newtonian fluid reaches a plateau sooner.Moreover,the velocity profile of the fluid is related to the molecule number density distribution and their values are inversely proportional.By analyzing the radial distribution function,we found that the hydrogen bonds between solute and water molecules weaken with the increase in velocity.This observation offers an explanation for the shear-thinning phenomenon of the non-Newtonian flow from a micro perspective.

Overall Assessment of Heat Transfer for a Rarefied Flow in a Microchannel with Obstacles Using Lattice Boltzmann Method

The objective of this investigation is to assess the effect of obstacles on numerical heat transfer and fluid flow momentum in a rectangular microchannel(MC).Two distinct configurations were studied:one without obstacles and the other with alternating obstacles placed on the upper and lower walls.The research utilized the thermal lattice Boltzmann method(LBM),which solves the energy and momentum equations of fluids with the BGK approximation,implemented in a Python coding environment.Temperature jump and slip velocity conditions were utilized in the simulation for the MC and extended to all obstacle boundaries.The study aims to analyze the rarefaction effect,with Knudsen numbers(Kn)of 0.012,0.02,and 0.05.The outcomes indicate that rarefaction has a significant impact on the velocity and temperature distribution.The presence of nine obstacles led to slower fluid movement inside the microchannel MC,resulting in faster cooling at the outlet.In MCs with obstacles,the rarefaction effect plays a crucial role in decreasing the Nusselt number(Nu)and skin friction coefficient(Cf).Furthermore,the study demonstrated that the obstacles played a crucial role in boosting fluid flow and heat transfer in the MC.The findings suggest that the examined configurations could have potential applications as cooling technologies in micro-electro-mechanical systems and microdevice applications.

Effect of boundary slip on electroosmotic flow in a curved rectangular microchannel

The aim of this study is to numerically investigate the impact of boundary slip on electroosmotic flow(EOF) in curved rectangular microchannels. Navier slip boundary conditions were employed at the curved microchannel walls. The electric potential distribution was governed by the Poisson–Boltzmann equation, whereas the velocity distribution was determined by the Navier–Stokes equation. The finite-difference method was employed to solve these two equations. The detailed discussion focuses on the impact of the curvature ratio, electrokinetic width, aspect ratio and slip length on the velocity. The results indicate that the present problem is strongly dependent on these parameters. The results demonstrate that by varying the dimensionless slip length from 0.001 to 0.01 while maintaining a curvature ratio of 0.5 there is a twofold increase in the maximum velocity. Moreover, this increase becomes more pronounced at higher curvature ratios. In addition, the velocity difference between the inner and outer radial regions increases with increasing slip length. Therefore, the incorporation of the slip boundary condition results in an augmented velocity and a more non-uniform velocity distribution. The findings presented here offer valuable insights into the design and optimization of EOF performance in curved hydrophobic microchannels featuring rectangular cross-sections.

Numerical Simulation of Droplet Generation in Coaxial Microchannels

In this study,numerical simulations of the pinching-off phenomena displayed by the dispersed phase in a continuous phase have been conducted using COMSOL Multiphysics(level-set method).Four flow patterns,namely“drop flow”,“jet flow”,“squeeze flow”,and“co-flow”,have been obtained for different flow velocity ratios,channel diameter ratios,density ratios,viscosity ratios,and surface tension.The flow pattern map of two-phase flow in coaxial microchannels has been obtained accordingly,and the associated droplet generation process has been critically discussed considering the related frequency,diameter,and pinch-off length.In particular,it is shown that the larger the flow velocity ratio,the smaller the diameter of generated droplets and the shorter the pinch-off length.The pinch-off length of a droplet is influenced by the channel diameter ratio and density ratio.The changes in viscosity ratio have a negligible influence on the droplet generation pinching frequency.With an increase in surface tension,the frequency of generation and pinch-off length of droplets decrease,but for small surface tension the generation diameter of droplet increases.

Gas microchannel plate-pixel detector for X-ray polarimetry

POLAR-2 is a gamma-ray burst(GRB)polarimeter that is designed to study the polarization in GRB radiation emissions,aiming to improve our knowledge of related mechanisms.POLAR-2 is expected to utilize an on-board polarimeter that is sensitive to soft X-rays(2-10 keV),called low-energy polarization detector.We have developed a new soft X-ray polari-zation detector prototype based on gas microchannel plates(GMCPs)and pixel chips(Topmetal).The GMCPs have bulk resistance,which prevents charging-up effects and ensures gain stability during operation.The detector is composed of low outgassing materials and is gas-sealed using a laser welding technique,ensuring long-term stability.A modulation factor of 41.28%±0.64% is obtained for a 4.5 keV polarized X-ray beam.A residual modulation of 1.96%±0.58% at 5.9 keV is observed for the entire sensitive area.

Applying the Shearlet-Based Complexity Measure for Analyzing Mass Transfer in Continuous-Flow Microchannels

Continuous-flow microchannels are widely employed for synthesizing various materials,including nanoparticles,polymers,and metal-organic frameworks(MOFs),to name a few.Microsystem technology allows precise control over reaction parameters,resulting in purer,more uniform,and structurally stable products due to more effective mass transfer manipulation.However,continuous-flow synthesis processes may be accompanied by the emergence of spatial convective structures initiating convective flows.On the one hand,convection can accelerate reactions by intensifying mass transfer.On the other hand,it may lead to non-uniformity in the final product or defects,especially in MOF microcrystal synthesis.The ability to distinguish regions of convective and diffusive mass transfer may be the key to performing higher-quality reactions and obtaining purer products.In this study,we investigate,for the first time,the possibility of using the information complexity measure as a criterion for assessing the intensity of mass transfer in microchannels,considering both spatial and temporal non-uniformities of liquid’s distributions resulting from convection formation.We calculate the complexity using shearlet transform based on a local approach.In contrast to existing methods for calculating complexity,the shearlet transform based approach provides a more detailed representation of local heterogeneities.Our analysis involves experimental images illustrating the mixing process of two non-reactive liquids in a Y-type continuous-flow microchannel under conditions of double-diffusive convection formation.The obtained complexity fields characterize the mixing process and structure formation,revealing variations in mass transfer intensity along the microchannel.We compare the results with cases of liquid mixing via a pure diffusive mechanism.Upon analysis,it was revealed that the complexity measure exhibits sensitivity to variations in the type of mass transfer,establishing its feasibility as an indirect criterion for assessing mass transfer intensity.The method presented can extend beyond flow analysis,finding application in the controlling of microstructures of various materials(porosity,for instance)or surface defects in metals,optical systems and other materials that hold significant relevance in materials science and engineering.

A comprehensive review on microchannel heat sinks for electronics cooling

The heat generation of electronic devices is increasing dramatically,which causes a serious bottleneck in the thermal management of electronics,and overheating will result in performance deterioration and even device damage.With the development of micro-machining technologies,the microchannel heat sink(MCHS)has become one of the best ways to remove the considerable amount of heat generated by high-power electronics.It has the advantages of large specific surface area,small size,coolant saving and high heat transfer coefficient.This paper comprehensively takes an overview of the research progress in MCHSs and generalizes the hotspots and bottlenecks of this area.The heat transfer mechanisms and performances of different channel structures,coolants,channel materials and some other influencing factors are reviewed.Additionally,this paper classifies the heat transfer enhancement technology and reviews the related studies on both the single-phase and phase-change flow and heat transfer.The comprehensive review is expected to provide a theoretical reference and technical guidance for further research and application of MCHSs in the future.

Flow Characteristics of Deionized Water in Microtubes

We investigate the deionized water flows in microtubes made of quartz at high pressure under steady flow condition in situations that （i） pure nitrogen is used as the pressure source, and the experimental pressure is 0.1-1 MPa; （ii） the inner diameters of the experimental microtubes are from 6μm to 50μm. The results indicate that （i） the flow characteristics of the microtubes with inner diameters of 50μm, 20μm, 15μm,10μm agree well with the traditional macro flow mechanics, （ii） there are obvious warps as compared with theoretical values in 6μm microtubes.

Synthesis of hexagonal monocrystal AlN microtubes and nanowires at low temperature

This paper reports that pure hexagonal aluminium nitride microtubes and nanowires growing along the [0001] direction have been successfully synthesized by directly reacting AlCl3 with NaN3 at low temperature （450℃） under condition of non-solvent system. The grey-white powder of reacting product was characterized by high-resolution transmission electron microscope （HRTEM）, which shows that the powder is long straight-wire morphology with outer diameter from 40nm to 300 nm and length up to several micrometres. The results of both electron diffraction （ED） and x-ray diffraction （XRD） indicate that the AlN microtubes have a pure hexagonal monocrystal tubular structure with the combination of the curled AlN nanobelts. Room-temperature photoluminescence spectrum of the synthesized sample showed an emission peak, which is closely related to the small size of the microtubes.

Impact of Plant Density on the Formation of Potato Mimitubers Derived from Microtubers and Tip-Cuttings in Plastic Houses

The potato minitubers have been widely used for the elite seed propagation to improve the seed potato system in China. However, little information is available for an efficient production of the minitubers with high plant density in the protected growing conditions like plastic houses. In present research, the minitubers of a wide-grown potato variety, Favorita, were produced with the microtubers from tissue culture and the tip-cuttings of the microtuber plants. Three plant densities, 200, 400 and 600 microtubers or plants m-2 were set up with the randomized block design of 3 replications and the experiment was repeated in 4 seasons in 2009-2010. The canopy development, light interception, dry weight production and partitioning, tuberization and tuber weight were investigated to elucidate the mechanism by which the plant density affects the formation and growth of the minitubers. The results showed that the number of the tubers formed per unite area was in line with the increase in plant density. The difference in leaf area index （LAI） between the plant densities, especially in early stage of the plant growth, resulted in more radiation interception and dry weight producing in higher plant density than in lower one. However, our analysis demonstrated that the conversion coefficient of the cumulative intercepted radiation to plant weight and the dry weight partition rate to the tubers were constant between plant densities, suggesting that less amount of the photoassimilates partitioned to individual tubers is causal for more small tubers in high plant density. A negative exponential curve model, determined by total number of tubers produced per unit area and the mean tuber weight, fitted well to the tuber size distribution pattern. The optimum plant density could be estimated from this model for a maximum production of the minitubers with desired size.

Experimental Study on Transitional Flow in a Circular Microtube

We investigate the characteristics of the transition from laminar to turbulent flow in the microtube with a diameter of 310μm. The microscopic particle image velocimetry is used to measure the water flow at Re =1600-2500 in the microtube. It is found that the flow transition occurs at Re=1600-1900, and the streamwise streaks and vortices appear in the transitional flow fields. These experimental observations provide a validation for the theoretical prediction of unstable travelling waves in pipe flow.

Flow characteristics of liquid with pressure-dependent viscosities in microtubes

It is obvious that the pressure gradient along the axial direction in a pipe flow keeps constant according to the Hagen-Poiseuille equation. However, recent experiments indicated that the distribution of the pressure seemed no longer linear for liquid flows in microtubes driven by high pressure （1-30MPa）. Based on H-P equation with slip boundary condition and Bridgman＇s relation of viscosity vs. static pressure, the nonlinear distribution of pressure along the axial direction is analyzed in this paper. The revised standard Poiseuille number with the effect of pressure-dependent viscosity taken into account agrees well with the experimental results. Therefore, the dependence of the viscosity on the pressure is one of the dominating factors under high driven pressure, and is represented by an important property coefficient α of the liquid.

The Effect of Plant Growth Regulator and Active Charcoal on the Development of Microtubers of Potatoes

With the detoxicated seedling of a potato cultivation breed named “Mire” as the material, the effect of auxins CCC, 6-BA, and active carbon to microtubers of potato (Solanum tubersum L.) was investigated under the in-vitro circumstances. The result indicated the exogenous auxins improved the production and quality of microtubers of potatoes. The effect of induction can be described as CCC > CCC + 6-BA > 6-BA > CK, the number of microtubers in per flask is 8.17 > 7.67 > 7.29 > 5.46, and the number of large potatoes in per flask is 6.33 > 5.17 > 3.17 > 1. In addition, by adding 0.5‰ of active charcoal, the growth period was shortened from 25.0 days to 9.33 days on average, and the amount of larger potatoes increased 8.54%. These results benefited the growth of microtubers of potato.

Environmental, morphological and physiological factors analyzes for optimization of potato (<i>Solanum tuberosum</i>L.) microtuber <i>in vitro</i>germination

The microtuber is considered one of the most effective means of spreading basic materials, as well as transporting and preserving potato germplasm varieties. To define the optimal conditions for the potato microtuber in vitro germination of Aida, Atlas and Odessa varieties, the effects of temperature, physiological age and grade (size) were evaluated. The study conducted at three different temperature levels has demonstrated that the most favorable temperature for microtuber germination at a higher and faster germination rate was 25℃, regardless of the variety. In addition, microtubers of large caliber, greater than 4 mm, germinate more quickly, with a higher germination rate, than smaller size ones (less than 4 mm) for all genotypes. For Atlas, Aida and Odessa varieties, a germination rate equal to 86.66%, 70% and 70% respectively, was obtained for microtubers with a caliber superior to 4 mm. Physiological age influences microtuber germination. The mean length of sprouts, reached after a 7 week incubation period, was more marked at “multiple sprout” and “branched sprout” stages than at a “monosprout” stage. The average length was 2.35 cm, 2.48 cm and 1.5 cm, respectively. Thus, it is necessary to plant microtubers at a “multiple sprout” stage to optimize their yield in plants and minitubers.

Science Letters: Equivalent thickness of materials of fused silica and stainless steel in the flow of microtubes

The deviation of flow characteristics from the predictions of the conventional theory for microtubes was attrib- uted to the change of fluid viscosity resulted from the interactions between the molecules on solid wall and in fluid. The degree of this departure is dependent on the microtubes materials. A concept of equivalent thickness with which conventional theory can be used to predict the flow in microtubes without modifying the fluid viscosity was put forward. The values of equivalent thickness for fused silica and stainless steel materials were determined as 1.8 μm and 1.5 μm, respectively, by repeated numeri- cal simulation.

In vitro corrosion properties of HTHEed Mg-Zn-Y-Nd alloy microtubes for stent applications:Influence of second phase particles and crystal orientation

Magnesium(Mg)alloys are promising materials for cardiovascular stent applications due to their good biocompatibility and biodegradability.However,in vitro and in vivo corrosion tests reveal that Mg alloy stents suffer from a rapid corrosion rate and severe localized corrosion,which is limiting their widespread application.To solve the problem of uneven degradation of stents,a HTHE(long-time and high-temperature heat treatment,large-reduction-ratio hot extrusion)process is used to manufacture Mg-Zn-Y-Nd alloy microtubes in this study.The heat treatment is to dissolve alloying elements and reduce the size of SPPs,and the hot extrusion is to acquire fine-grained and strongly textured microtubes.The microstructural characterization shows that coarse second phases in as-cast alloy are refined and uniformly distributed in matrix of microtubes.After hot extrusion,microtubes show strong texture with basal plain oriented parallel to the longitudinal section(LS).The corrosion testing indicates that severe localized corrosion occurs on the cross section(CS)while localized corrosion is alleviated on the LS.Based on the different corrosion properties of the LS and CS,HTHEed microtubes are promising for solving the problems of rapid corrosion rate and severe localized corrosion of Mg alloy stents.

Supramolecular electrostatic self-assembly of mesoporous thin-walled graphitic carbon nitride microtubes for highly efficient visible-light photocatalytic activities

For efficient solar energy conversion,the morphology engineering of hollow graphitic carbon nitride(gC3 N4)is one of the promising approachs benefiting from abundant exposed active sites and short photocarrier transport distances,but is difficult to control on account of easy structural collapse.Herein,a facile supramolecular electrostatic self-assembly strategy has been developed for the first time to fabricate mesoporous thin-walled g-C3N4 microtubes(mtw-CNT)with shell thickness of ca.13 nm.The morphological control of g-C3N4 enhances specific surface area by 12 times,induces stronger optical absorption,widens bandgap by 0.18 e V,improves photocurrent density by 2.5 times,and prolongs lifetimes of charge carriers from bulk to surface,compared with those of bulk g-C3N4.As a consequence,the transformed g-C3N4 exhibits the optimum photocatalytic H2-production rate of 3.99 mmol·h^-1·g^-1(λ>420 nm)with remarkable apparent quantum efficiency of 8.7%(λ=420±15 nm)and long-term stability.Moreover,mtw-CNT also achieves high photocatalytic CO2-to-CO selectivity of 96%(λ>420 nm),much better than those on the most previously reported porous g-C3N4 photocatalysts prepared by the conventional hard-templating and soft-templating methods.

Template-free synthesis of Co_(3)O_(4)microtubes for enhanced oxygen evolution reaction

To fully exploit the superiority of tubular structures,in this study,we systematically explore the optimal preparation conditions for Ni/Co_(3)O_(4),including cation species and content,additive species and content,and anion species.Our results reveal that the formation of an initial cobalt nickel acetate hydroxide prism is the key factor and directly affects the final microtubular structure.Moreover,P is subsequently doped into the Ni/Co_(3)O_(4)lattice to increase the M^(3+)/M^(2+)molar ratio(M=Co and Ni),promote reaction kinetics,and optimize electronic structure.Consequently,the oxygen evolution reaction performance of P-doped tubular Ni/Co_(3)O_(4)is significantly higher than that of undoped Ni/Co_(3)O_(4)and the state-of-the-art RuO_(2)electrocatalyst.

Acceleration of Microtuber Induction in Potato by Cytokinine and Photoperiod Adjustment

Protocol was developed for acceleration of microtuber induction in potato. It was observed that cytokinine (Kin), and both dark and light period had great influence on in vitro tuberization. Regarding concentration of Kin, 8 mg/l was found excellent for microtuber induction and formation under both dark and light conditions. Under continuous dark condition, higher percentage of explants (shoot) induced microtuber was observed than the short and long period of light conditions. For increasing the number and weight of microtuber product/explant, use of long photoperiod (16 h) is recommended.