This study focused on the investigation of the edge effect of diamond films deposited by microwave plasma chemical vapor de-position.Substrate bulge height△h is a factor that affects the edge effect,and it was used t...This study focused on the investigation of the edge effect of diamond films deposited by microwave plasma chemical vapor de-position.Substrate bulge height△h is a factor that affects the edge effect,and it was used to simulate plasma and guide the diamond-film deposition experiments.Finite-element software COMSOL Multiphysics was used to construct a multiphysics(electromagnetic,plasma,and fluid heat transfer fields)coupling model based on electron collision reaction.Raman spectroscopy and scanning electron microscopy were performed to characterize the experimental growth and validate the model.The simulation results reflected the experimental trends observed.Plasma discharge at the edge of the substrate accelerated due to the increase in△h(△h=0-3 mm),and the values of electron density(n_(c)),molar concentration of H(C_(H)),and molar concentration of CH_(3)(C_(CH_(3)))doubled at the edge(for the special concave sample with△h=−1 mm,the active chemical groups exhibited a decreased molar concentration at the edge of the substrate).At=0-3 mm,a high diamond growth rate and a large diamond grain size were observed at the edge of the substrate,and their values increased with.The uniformity of film thickness decreased with.The Raman spectra of all samples revealed the first-order characteristic peak of dia-mond near 1332 cm^(−1).When△h=−1 mm,tensile stress occurred in all regions of the film.When△h=1-3 mm,all areas in the film ex-hibited compressive stress.展开更多
Diamond films with very smooth surface and good optical quality have been deposited onto silicon substrate using microwave plasma chemical vapor deposition (MPCVD) from a gas mixture of ethanol and hydrogen at a low s...Diamond films with very smooth surface and good optical quality have been deposited onto silicon substrate using microwave plasma chemical vapor deposition (MPCVD) from a gas mixture of ethanol and hydrogen at a low substrate temperature of 450 ℃. The effects of the substrate temperature on the diamond nucleation and the morphology of the diamond film have been investigated and observed with scanning electron microscopy (SEM). The microstructure and the phase of the film have been characterized using Raman spectroscopy and X-ray diffraction (XRD). The diamond nucleation density significantly decreases with the increasing of the substrate temperature. There are only sparse nuclei when the substrate temperature is higher than 800 ℃ although the ethanol concentration in hydrogen is very high. That the characteristic diamond peak in the Raman spectrum of a diamond film prepared at a low substrate temperature of 450 ℃ extends into broadband indicates that the film is of nanophase. No graphite peak appeared in the XRD pattern confirms that the film is mainly composed of SP3 carbon. The diamond peak in the XRD pattern also broadens due to the nanocrystalline of the film.展开更多
Due to its unique properties such as high hardness, light transmittance, thermal conductance, chemical stability and corrosion resistance, diamond has drawn tremendous attention in last two decades. These specific pro...Due to its unique properties such as high hardness, light transmittance, thermal conductance, chemical stability and corrosion resistance, diamond has drawn tremendous attention in last two decades. These specific properties made diamond film a promising material for cutting tools, microwave windows, heat sinks for electronic devices and diamond electrodes. However, the diamond film with grain sizes at microscale usually exhibits high surface roughness and hinders its applications in the microelectro mechanical system (MEMS) and biological field because it is difficult to be polished by mechanical and chemical methods. With the development of the chemical vapor deposition, the nanocrystalline diamond (NCD) film has been fabricated and found new applications. The grain size of NCD film is in the range of 10 to 100 nm, which inherits the properties of the diamond and possesses the unique properties of the nanoscale materials, and the morphology of the NCD film is granular or needle-like structure. The microwave plasma chemical vapor deposition (MPCVD) has been regarded as the most promising method to deposit NCD film at low temperature. Compared to the hot filament CVD, MPCVD can grow high quality NCD film avoiding of the contamination from the filament materials. The MPCVD technique has high plasma density to activate carbonaceous compound and grow NCD film in high growth rate and low substrate temperature. The unique properties of NCD film, such as the superior electrical, mechanical and biological properties facilitate their application in various fields. The biological application, especially as a biocompatible coating, mainly includes the joint replacement implants and protective coatings and the ophthalmological prosthesis.展开更多
Nano-crystalline diamond （NCD） films were prepared on poly-crystalline diamond （PCD） thick flims by the microwave plasma enhanced chemical vapor deposition （MPCVD） method. Free standing PCD thick film （50 mm in...Nano-crystalline diamond （NCD） films were prepared on poly-crystalline diamond （PCD） thick flims by the microwave plasma enhanced chemical vapor deposition （MPCVD） method. Free standing PCD thick film （50 mm in diameter） with a thickness of 413 μm was deposited in CHn/H2 plasma. It was then abraded for 2 hours and finally cut into pieces in a size of 10×10 mm^2 by pulse laser. NCD fihns were deposited on the thick film substrates by introducing a micro-crystalline diamond （MCD） interlayer. Results showed that a higher carbon concentration （5%） and a lower substrate temperature （650℃） were feasible to obtain a highly smooth interlayer, and the appropriate addition of oxygen （2%） into the gas mixture was conducive to obtaining a smooth nano-crystalline diamond film with a tiny grain size.展开更多
Optical emission spectroscopy （OES） was used to study the gas phase composition near the substrate surface during diamond deposition by high-power DC arc plasma jet chemical vapor deposition （CVD）. C2 radical was ...Optical emission spectroscopy （OES） was used to study the gas phase composition near the substrate surface during diamond deposition by high-power DC arc plasma jet chemical vapor deposition （CVD）. C2 radical was determined as the main carbon radical in this plasma atmosphere. The deposition parameters, such as substrate temperature, anode-substrate distance, methane concentration, and gas flow rate, were inspected to find out the influence on the gas phase. A strong dependence of the concentrations and distribution of radicals on substrate temperature was confirmed by the design of experiments （DOE）. An explanation for this dependence could be that radicals near the substrate surface may have additional ionization or dissociation and also have recombination, or are consumed on the substrate surface where chemical reactions occur.展开更多
Free-standing diamond films have been successfully deposited on stainless steel substrates using microwave plasma-assisted chemical vapor deposition. Although iron, which is the main element of stainless steel, is kno...Free-standing diamond films have been successfully deposited on stainless steel substrates using microwave plasma-assisted chemical vapor deposition. Although iron, which is the main element of stainless steel, is known to inhibit the nucleation of diamond and enhance the formation of graphite, we were able to grow relatively thick films （-1.2 mm）. The films were easily detachable from the substrates. The poor adhesion made it possible to obtain free-standing diamond films without chemical etching. Raman spectroscopy showed the 1332 cm^-1 characteristic Raman peak of diamond and the 1580 cm^-1, 1350 cm^-1 bands of graphite on the growth surface and backside of the films, respectively. By energy dispersive X-ray spectroscopy it was only possible to detect iron on the back of the films, but not on the surface. The role of iron in the film growth is discussed.展开更多
Boron-doped nano-crystalline diamond （NCD） thin films have been successfully deposited on well-polished poly-crystalline diamond （PCD） thick films in a microwave plasma enhanced chemical vapor deposition （MPCVD）...Boron-doped nano-crystalline diamond （NCD） thin films have been successfully deposited on well-polished poly-crystalline diamond （PCD） thick films in a microwave plasma enhanced chemical vapor deposition （MPCVD） reactor for the first time. Different surface pretreatment techniques are carried out under different gas conditions （CH4, H2, Ar, and CH4/H2） to eliminate the effect of grain boundaries on the growth of a smooth NCD intrinsic layer. Well doped NCD films have been fabricated in CH4/H2/B2H6 plasma by varying the atomic ratio of B/C and the substrate temperature. Atomic force microscopy （AFM） results show that pretreatment in pure CH4 plasma at 1000℃ is most effective for NCD growth, while hydrogen containing plasma is harmful to the surface smoothness of NCD thin fihns. Doping research indicates that the optimum parameters for the boron-doping of high-quality NCD thin films are B/C=300 ppm （10-6） and 800℃.展开更多
Among the three main methods for the s ynthesis of carbon nanotubes(CNTs ),chemical vapor deposition(CVD)has received a great deal of attentio n since CNTs can be synthesized at sig nificantly low temperature.Plasma c...Among the three main methods for the s ynthesis of carbon nanotubes(CNTs ),chemical vapor deposition(CVD)has received a great deal of attentio n since CNTs can be synthesized at sig nificantly low temperature.Plasma chemical vapor deposition me thods can synthesize CNTs at lower te mperature than thermal CVD.But in th e usual catalytic growth of CNTs by CVD,CNTs are often tangled together and have some defects.These will limit t he property research and potential applications.How to synthesize the str aight CNTs at low temperature become s a challenging issue.In this letter,s traight carbon nanotube(CNT)films were achieved by microwave pla sma chemical vapor deposition(MWPCVD)catalyzed by round Fe-Co-Ni alloy particles on Ni substrate at 610℃.It wa s found that,in our experimental condition,the uniform growth rate along the circumference of round alloy particles plays a very important role in the gro wth of straight CNT films.And because the substrate is conducting,the straight CNT films grown at low temperature ma y have the benefit for property research and offer the possibility to use t hem in the future applications.展开更多
基金supported by the National Key Research and Development Program(No.2019YFE03100200)the State Key Lab for Advanced Metals and Materials,the Fund of National Key Laboratory of Solid-State Microwave Devices and Circuits,the National Natural Science Foundation of China(No.52102034)the Or-ganized Research Fund of North China University of Tech-nology(No.2023YZZKY12).The authors are very grateful for the financial support of these institutions.
文摘This study focused on the investigation of the edge effect of diamond films deposited by microwave plasma chemical vapor de-position.Substrate bulge height△h is a factor that affects the edge effect,and it was used to simulate plasma and guide the diamond-film deposition experiments.Finite-element software COMSOL Multiphysics was used to construct a multiphysics(electromagnetic,plasma,and fluid heat transfer fields)coupling model based on electron collision reaction.Raman spectroscopy and scanning electron microscopy were performed to characterize the experimental growth and validate the model.The simulation results reflected the experimental trends observed.Plasma discharge at the edge of the substrate accelerated due to the increase in△h(△h=0-3 mm),and the values of electron density(n_(c)),molar concentration of H(C_(H)),and molar concentration of CH_(3)(C_(CH_(3)))doubled at the edge(for the special concave sample with△h=−1 mm,the active chemical groups exhibited a decreased molar concentration at the edge of the substrate).At=0-3 mm,a high diamond growth rate and a large diamond grain size were observed at the edge of the substrate,and their values increased with.The uniformity of film thickness decreased with.The Raman spectra of all samples revealed the first-order characteristic peak of dia-mond near 1332 cm^(−1).When△h=−1 mm,tensile stress occurred in all regions of the film.When△h=1-3 mm,all areas in the film ex-hibited compressive stress.
基金The project supported by the ChenGuang project of the Wuhan government (No. 20025001014)
文摘Diamond films with very smooth surface and good optical quality have been deposited onto silicon substrate using microwave plasma chemical vapor deposition (MPCVD) from a gas mixture of ethanol and hydrogen at a low substrate temperature of 450 ℃. The effects of the substrate temperature on the diamond nucleation and the morphology of the diamond film have been investigated and observed with scanning electron microscopy (SEM). The microstructure and the phase of the film have been characterized using Raman spectroscopy and X-ray diffraction (XRD). The diamond nucleation density significantly decreases with the increasing of the substrate temperature. There are only sparse nuclei when the substrate temperature is higher than 800 ℃ although the ethanol concentration in hydrogen is very high. That the characteristic diamond peak in the Raman spectrum of a diamond film prepared at a low substrate temperature of 450 ℃ extends into broadband indicates that the film is of nanophase. No graphite peak appeared in the XRD pattern confirms that the film is mainly composed of SP3 carbon. The diamond peak in the XRD pattern also broadens due to the nanocrystalline of the film.
文摘Due to its unique properties such as high hardness, light transmittance, thermal conductance, chemical stability and corrosion resistance, diamond has drawn tremendous attention in last two decades. These specific properties made diamond film a promising material for cutting tools, microwave windows, heat sinks for electronic devices and diamond electrodes. However, the diamond film with grain sizes at microscale usually exhibits high surface roughness and hinders its applications in the microelectro mechanical system (MEMS) and biological field because it is difficult to be polished by mechanical and chemical methods. With the development of the chemical vapor deposition, the nanocrystalline diamond (NCD) film has been fabricated and found new applications. The grain size of NCD film is in the range of 10 to 100 nm, which inherits the properties of the diamond and possesses the unique properties of the nanoscale materials, and the morphology of the NCD film is granular or needle-like structure. The microwave plasma chemical vapor deposition (MPCVD) has been regarded as the most promising method to deposit NCD film at low temperature. Compared to the hot filament CVD, MPCVD can grow high quality NCD film avoiding of the contamination from the filament materials. The MPCVD technique has high plasma density to activate carbonaceous compound and grow NCD film in high growth rate and low substrate temperature. The unique properties of NCD film, such as the superior electrical, mechanical and biological properties facilitate their application in various fields. The biological application, especially as a biocompatible coating, mainly includes the joint replacement implants and protective coatings and the ophthalmological prosthesis.
基金supported by the Research Pund of Hubei Provincial Department of Education of China (No.Q20081505)
文摘Nano-crystalline diamond （NCD） films were prepared on poly-crystalline diamond （PCD） thick flims by the microwave plasma enhanced chemical vapor deposition （MPCVD） method. Free standing PCD thick film （50 mm in diameter） with a thickness of 413 μm was deposited in CHn/H2 plasma. It was then abraded for 2 hours and finally cut into pieces in a size of 10×10 mm^2 by pulse laser. NCD fihns were deposited on the thick film substrates by introducing a micro-crystalline diamond （MCD） interlayer. Results showed that a higher carbon concentration （5%） and a lower substrate temperature （650℃） were feasible to obtain a highly smooth interlayer, and the appropriate addition of oxygen （2%） into the gas mixture was conducive to obtaining a smooth nano-crystalline diamond film with a tiny grain size.
基金the National High-Tech Research and Development Program of China (No.2002AA305508)the National Natural Science Foundation of China (No.50472095)+1 种基金the Scientific Research Foundation for the Returned Overseas Chinese Scholars (No.2003-14)Beijing Novel Project (No. 2003A13).]
文摘Optical emission spectroscopy （OES） was used to study the gas phase composition near the substrate surface during diamond deposition by high-power DC arc plasma jet chemical vapor deposition （CVD）. C2 radical was determined as the main carbon radical in this plasma atmosphere. The deposition parameters, such as substrate temperature, anode-substrate distance, methane concentration, and gas flow rate, were inspected to find out the influence on the gas phase. A strong dependence of the concentrations and distribution of radicals on substrate temperature was confirmed by the design of experiments （DOE）. An explanation for this dependence could be that radicals near the substrate surface may have additional ionization or dissociation and also have recombination, or are consumed on the substrate surface where chemical reactions occur.
文摘Free-standing diamond films have been successfully deposited on stainless steel substrates using microwave plasma-assisted chemical vapor deposition. Although iron, which is the main element of stainless steel, is known to inhibit the nucleation of diamond and enhance the formation of graphite, we were able to grow relatively thick films （-1.2 mm）. The films were easily detachable from the substrates. The poor adhesion made it possible to obtain free-standing diamond films without chemical etching. Raman spectroscopy showed the 1332 cm^-1 characteristic Raman peak of diamond and the 1580 cm^-1, 1350 cm^-1 bands of graphite on the growth surface and backside of the films, respectively. By energy dispersive X-ray spectroscopy it was only possible to detect iron on the back of the films, but not on the surface. The role of iron in the film growth is discussed.
基金supported by National Natural Science Foundation of China(No.11175137)the Research Fund of Hubei Provincial Department of Education of China(No.Q20081505)the Research Fund of Wuhan Institute of Technology of China(No.11111051)
文摘Boron-doped nano-crystalline diamond （NCD） thin films have been successfully deposited on well-polished poly-crystalline diamond （PCD） thick films in a microwave plasma enhanced chemical vapor deposition （MPCVD） reactor for the first time. Different surface pretreatment techniques are carried out under different gas conditions （CH4, H2, Ar, and CH4/H2） to eliminate the effect of grain boundaries on the growth of a smooth NCD intrinsic layer. Well doped NCD films have been fabricated in CH4/H2/B2H6 plasma by varying the atomic ratio of B/C and the substrate temperature. Atomic force microscopy （AFM） results show that pretreatment in pure CH4 plasma at 1000℃ is most effective for NCD growth, while hydrogen containing plasma is harmful to the surface smoothness of NCD thin fihns. Doping research indicates that the optimum parameters for the boron-doping of high-quality NCD thin films are B/C=300 ppm （10-6） and 800℃.
文摘Among the three main methods for the s ynthesis of carbon nanotubes(CNTs ),chemical vapor deposition(CVD)has received a great deal of attentio n since CNTs can be synthesized at sig nificantly low temperature.Plasma chemical vapor deposition me thods can synthesize CNTs at lower te mperature than thermal CVD.But in th e usual catalytic growth of CNTs by CVD,CNTs are often tangled together and have some defects.These will limit t he property research and potential applications.How to synthesize the str aight CNTs at low temperature become s a challenging issue.In this letter,s traight carbon nanotube(CNT)films were achieved by microwave pla sma chemical vapor deposition(MWPCVD)catalyzed by round Fe-Co-Ni alloy particles on Ni substrate at 610℃.It wa s found that,in our experimental condition,the uniform growth rate along the circumference of round alloy particles plays a very important role in the gro wth of straight CNT films.And because the substrate is conducting,the straight CNT films grown at low temperature ma y have the benefit for property research and offer the possibility to use t hem in the future applications.
