Physics package based on intracavity laser cooling ^(87)Rb atoms for space cold atom microwave clock

This article proposes a new physics package to enhance the frequency stability of the space cold atom clock with the advantages of a microgravity environment. Clock working processes, including atom cooling, atomic state preparation,microwave interrogation, and transition probability detection, are integrated into the cylindrical microwave cavity to achieve a high-performance and compact physics package for the space cold atom clock. We present the detailed design and ground-test results of the cold atom clock physics package in this article, which demonstrates a frequency stability of 1.2×10^(-12) τ^(-1/2) with a Ramsey linewidth of 12.5 Hz, and a better performance is predicted with a 1 Hz or a narrower Ramsey linewidth in microgravity environment. The miniaturized cold atom clock based on intracavity cooling has great potential for achieving space high-precision time-frequency reference in the future.

Ratio of Gravitational Force to Electric Force from Empirical Equations in Terms of the Cosmic Microwave Background Temperature

Previously, we presented several empirical equations using the cosmic microwave background (CMB) temperature. Next, we propose an empirical equation for the fine-structure constant. Considering the compatibility among these empirical equations, the CMB temperature (Tc) and gravitational constant (G) were calculated to be 2.726312 K and 6.673778 × 10−11 m3∙kg−1∙s−2, respectively. Every equation could be explained in terms of the Compton length of an electron (λe), the Compton length of a proton (λp) and a. Furthermore, every equation could also be explained in terms of Avogadro’s number and the number of electrons in 1 C. However, the ratio of the gravitational force to the electric force cannot be uniquely determined when the unit of the Planck constant (Js) is changed. In this study, we showed that every equation can be described in terms of Planck constant. From the assumption of minimum mass, the ratio of gravitational force to electric force could be elucidated.

Correspondence Principle for Empirical Equations in Terms of the Cosmic Microwave Background Temperature with Solid-State Ionics

Previously, we presented several empirical equations using the cosmic microwave background (CMB) temperature that were mathematically connected. Next, we proposed an empirical equation for the fine-structure constant. Considering the compatibility among these empirical equations, the CMB temperature (Tc) and gravitational constant (G) were calculated to be 2.726312 K and 6.673778 × 10-11 m3·kg-1·s-2, respectively. Every equation can be explained in terms of the Compton length of an electron (λe), the Compton length of a proton (λp) and α. However, these equations are difficult to follow. Using the correspondence principle with the thermodynamic principles in solid-state ionics, we propose a canonical ensemble to explain these equations in this report. For this purpose, we show that every equation can be explained in terms of Avogadro’s number and the number of electrons in 1 C.

Algorithms for Empirical Equations in Terms of the Cosmic Microwave Background Temperature

Previously, we presented several empirical equations using the cosmic microwave background (CMB) temperature. Next, we propose an empirical equation for the fine-structure constant. Considering the compatibility among these empirical equations, the CMB temperature (Tc) and gravitational constant (G) were calculated to be 2.726312 K and 6.673778 × 10−11 m3∙kg−1∙s−2, respectively. Every equation can be explained numerically in terms of the Compton length of an electron (λe), the Compton length of a proton (λp) and α. Furthermore, every equation can also be explained in terms of the Avogadro number and the number of electrons at 1 C. We show that every equation can be described in terms of the Planck constant. Then, the ratio of the gravitational force to the electric force can be uniquely determined with the assumption of minimum mass. In this report, we describe the algorithms used to explain these equations in detail. Thus, there are no dimension mismatch problems.

Structural and microwave absorption properties of CoFe_(2)O_(4)/residual carbon composites

Electromagnetic interference,which necessitates the rapid advancement of substances with exceptional capabilities for bsorbing electromagnetic waves,is of urgent concern in contemporary society.In this work,CoFe_(2)O_(4)/residual carbon from coal gasification fine slag(CFO/RC)composites were created using a novel hydrothermal method.Various mechanisms for microwave absorption,including conductive loss,natural resonance,interfacial dipole polarization,and magnetic flux loss,are involved in these composites.Consequently,compared with pure residual carbon materials,this composite offers superior capabilities in microwave absorption.At 7.76GHz,the CFO/RC-2 composite achieves an impressive minimum reflection loss(RL_(min))of-43.99 dB with a thickness of 2.44 mm.Moreover,CFO/RC-3 demonstrates an effective absorption bandwidth(EAB)of up to 4.16 GHz,accompanied by a thickness of 1.18mm.This study revealed the remarkable capability of the composite to diminish electromagnetic waves,providing a new generation method for microwave absorbing materials of superior quality.

Experiments and modeling of double-peak precipitation hardening and strengthening mechanisms in Al-Zn-Mg alloy

The aim of the present work is to develop a model for simulating double-peak precipitation hardening kinetics in Al-Zn-Mg alloy with the simultaneous formation of different types of precipitates at elevated temperatures based on the modified Langer-Schwartz approach. The double aging peaks are present in the long time age-hardening curves of Al-Zn-Mg alloys. The physically-based model, while taking explicitly into account nucleation, growth, coarsening of the new phase precipitations and two strengthening mechanisms associated with particle-dislocation interaction （shearing and bypassing）, was used for the analysis of precipitates evolution and precipitation hardening during aging of Al-Zn-Mg alloy. Model predictions were compared with the measurements of Al-Zn-Mg alloy. The systematic and quantitative results show that the predicted hardness profiles of double peaks via adding a shape dependent parameter in the growth equation for growth and coarsening generally agree well with the measured ones. Two strengthening mechanisms associated with particle-dislocation interaction （shearing and bypassing） were considered operating simultaneously in view of the particle size-distribution. The transition from shearing to bypassing strengthening mechanism was found to occur at rather early stage of the particle growth. The bypassing was found to be the prevailing strengthening mechanism in the investigated alloys.

Strengthening effects of BFRP on reinforced concrete beams

Reinforced concrete （RC） beams externally bonded with basalt fiber reinforced polymer （BFRP） are experimentally investigated by using different numbers of bonding plies, transverse anchorages as well as the initial conditions of strengthened beams. The performances of the BFRP strengthening are compared with those of the carbon fiber reinforced polymer （CFRP） and the glass fiber reinforced polymer （GFRP） under the same experimental condition. Experimental results indicate that the strength and ductility of the strengthened beam with two plies of the BFRP are improved remarkably than those with one ply. The strengthening effects of the BFRP lie between those of the CFRP and the GFRP. The BFRP strengthening is little influenced by pre-cracks of concrete. Most failures are caused by interfaciai debonding induced by flexural cracks in the experiment. Clamping of Uwraps along the whole beam is less efficient than endpoint anchorage for increasing the ultimate load of the strengthened beam. Finally, the models suggested by the five guidelines for predicting the debonding strain of the CFRP are extended to the BFRP and the conservative estimates of the debonding strain of the BFRP are given as well.

Flexural behaviors of FRP strengthened corroded RC beams

The flexural behavior of eight FRP （ fiber reinforced polymer） strengthened RC （reinforced concrete） beams with different steel corrosion rates are numerically studied by Ansys finite element software. The influences of the corrosion rate on crack pattern, failure mechanism, ultimate strength, ductility and deformation capacity are also analyzed. Modeling results show that the beams with low corrosion rates fail by the crushing of the concrete in the compression zone. For the beams with medium corrosion rates, the bond slip between the concrete and the longitudinal reinforcement occurs after steel yielding, and the beams finally fail by the debonding of the FRP plates. For the beams with high corrosion rates, the bond slip occurs before steel yielding, and the beams finally fail by the crushing of the concrete in the compression zone. The higher the corrosion rates of the longitudinal reinforcement, the more the carrying capacity of FRP strengthened RC beams reduces. The carrying capacity of RCB-1 （the corrosion rate is 0） is 115 kN, and the carrying capacity of RCB-7 （the corrosion rate is 20% ） is 42 kN. The deformation capacity of FRP strengthened corroded RC beams is higher than that of FRP strengthened uucorroded RC beams. The ultimate deflection of RCB-1 and RCB-7 are 20 mm and 35 nun, respectively, and the ultimate deflection of RCB-5 （the corrosion rate is 10% ） reaches 60 ilUn.

DIAMOND FILMS DEPOSITED AT LOW TEMPERATURES MICROWAVE PLASMA-ASSISTED CVD METHOD

Low-temperature deposition of diamond thin films in the range of 280￣445℃ has been successfully carried out by microwave plasma-assisted CVD method.At lower deposition temperatures (280￣445℃),the large increase in the nucleation density and great improvement in the average surfae roughness of the diamond were observed. Results of low temperature deposition and characterization of diamond thin films obtained are presented.

Capacitive Microwave MEMS Switch

A novel capacitive microwave MEMS switch with a silicon/metal/dielectric as a membrane is fabricated successfully by bonding and etching-stop process. Its principal, design, and fabricating process are described in detail. A patterned dielectric layer, Ta2O5, with dielectric constant of 24 is reached. Experiment results show this novel structure,where the switch＇s dielectric layer is not prepared on the transmission line, features very low insertion loss. The insertion loss is 0.06dB at 2GHz and lower than 0.5dB in the wider range from De up to 20GHz,especially when the transmission line metal is only 0. 5μm thick.

Degradation of PCDD/Fs in MSWI fly ash using a microwave-assisted hydrothermal process

In this work,microwave treatment was introduced to a hydrothermal treatment process to degrade PCDD/Fs(Polychlorinated dibenzo-p-dioxins and dibenzofurans)in municipal solid waste incineration(MSWI)fly ash.Three process additives(NaOH,Na2 HPO4,H2 O),temperatures(150℃,185℃,220℃)and reaction times(1 h,2 h,3 h)were investigated to identify their effect on the disposal of fly ash samples through orthogonal experiments.High-resolution gas chromatography–mass spectrometry(HRGC/MS)was applied to determine the PCDD/F concentrations in MSWI fly ash.The experimental results revealed that 83.7%of total PCDD/Fs was degraded.Reaction temperature was the most important factor for the degradation of the total PCDD/Fs.Both direct destruction and chlorination reactions(the chlorination degree of PCDFs increased)took part in the degradation of PCDD/Fs in fly ash,which was a new discovery.Several PCDD/F indexes determined by the concentration of indicative congeners were found to quantitatively characterize the dioxin toxicity of the fly ash.Furthermore,heavy metals in the fly ash sample were solidified using microwave-assisted hydrothermal treatment,which provided an experimental basis for the simultaneous disposal of dioxins and heavy metals.Thus,the microwave-assisted hydrothermal process should be considered for the future disposal of MSWI fly ash.

Microstructure and strengthening mechanisms of Mg-6Al-6Nd alloy

The microstructure and strengthening mechanisms of as-cast Mg-6Al-6Nd alloy were studied. The results show that the addition of 6 wt.% Nd into Mg-6Al alloy leads to the precipitation of Al11Nd3 and Al2Nd phases and decrease in the content of Al solid soluted in Mg-Al matrix. The volume fractions of Al11Nd3 and Al2Nd phases are 3.64% and 0.34%, respectively. Compared with Mg-6Al alloy, the ultimate strength, yielding strength, and elongation of Mg-6Al-6Nd alloy at room temperature and 175℃ are enhanced in some degrees. The strengthening mechanisms of Mg-6Al-6Nd alloy are mainly composed of solid solution strengthening of Al solid soluted in Mg-Al matrix and grain refmement strengthening, dispersion strengthening, and composite strengthening brought by the precipitation of Al11Nd3 phase. The composite strengthening includes the load transfer from the matrix to Al11Nd3 phase and the enhancement of dislocation density due to the geometrical mismatch and thermal mismatch between the matrix and Al11Nd3 phase.

Kinetic Mechanisms for Preparing Silymarin via Microwave-assisted Extraction

The kinetic mechanism for the preparation of silymarin from milk thistle seeds was studied during the microwave-assisted extraction （MAE） process. The results showed that the transfer rate of silymarin from milk thistle seeds increased with the microwave output power and temperature during MAE processing. The apparent extraction rate constant k （s-1） was 1.2028×10-2 , 1.2248×10-2 , and 1.2485×10-2 , and diffusion coefficient D （m2·s-1 ） was 4.21×10-10, 4.29×10-10 , and 4.37×10-10 at the microwave temperatures of 383, 393, and 403 K, respectively, in the silymarin MAE process. With the help of scanning electron microscopy （SEM）, the microstructures of the samples extracted by MAE were observed. The results revealed that the increased efficiency and rate of MAE of silymarin could be attributed mainly to the subsequent cell change resulting from superheating effects during MAE.

Comparison of the mechanisms of microwave roasting and conventional roasting and of their effects on vanadium extraction from stone coal

Experiments comparing microwave blank roasting and conventional blank roasting for typical vanadium-bearing stone coal from Hubei Province in central China, in which vanadium is present in muscovite, were conducted to investigate the effects of roasting tempera- ture, roasting time, H2SO4 concentration, and leaching time on vanadium extraction. The results show that the vanadium leaching efficiency is 84% when the sample is roasted at 800℃ for 30 min by microwave irradiation and the H2SO4 concentration, liquid/solid ratio, leaching temperature, and leaching time are set as 20vo1%, 1.5：1 mL.g-1, 95℃, and 8 h, respectively. However, the vanadium leaching efficiency achieved for the sample subjected to conventional roasting at 900℃ for 60 min is just 71% under the same leaching conditions. Scanning electron microscopy （SEM） analysis shows that the microwave roasted samples contain more cracks and that the particles are more porous compared to the conventionally roasted samples. According to the results of X-ray diffraction （XRD） and Fourier-transform infrared （FTIR） analyses, neither of these roasting methods could completely destroy the mica lattice structure under the experimental conditions; however, both methods deformed the muscovite structure and facilitated the leaching process. Comparing with conventional roasting, microwave roasting causes a greater deformation of the mineral structure at a lower temperature for a shorter roasting time.

Self-adaptive PID controller of microwave drying rotary device tuning on-line by genetic algorithms

The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and with multivariable nonlinear interaction of microwave and materials. The conventional PID control strategy incorporated with optimization GA was put forward to maintain the optimum drying temperature in order to keep the moisture content below 1%, whose adaptation ability included the cost function of optimization GA according to the output change. Simulations on five different industrial process models and practical temperature process control system for selenium-enriched slag drying intensively by using IMDRDWM were carried out systematically, indicating the reliability and effectiveness of control design. The parameters of proposed control design are all on-line implemented without iterative predictive calculations, and the closed-loop system stability is guaranteed, which makes the developed scheme simpler in its synthesis and application, providing the practical guidelines for the control implementation and the parameter design.

Microwave Photonics for Modern Radar Systems

The emerging new concepts and technologies based on microwave photonics have led to an ever-increasing interest in developing innovative radar systems with a net gain in functionality,bandwidth /resolution,size,mass,complexity and cost when compared with the traditional implementations. This paper describes the techniques developed in the last few years in microwave photonics that might revolutionize the way to design multifunction radar systems,with an emphasis on the recent advances in optoelectronic oscillators( OEOs),arbitrary waveform generation,photonic mixing,phase coding,filtering,beamforming,analog-to-digital conversion,and stable radio-frequency signal transfer. Challenges in implementation of these components and subsystems for meeting the technique requirements of the multifunction radar applications are discussed.

Quasi-plane-hypothesis of strain coordination for RC beams seismically strengthened with externally-bonded or near-surface mounted fiber reinforced plastic

The application of fiber reinforced plastic（FRP）,including carbon FRP and glass FRP,for structural repair and strengthening has grown due to their numerous advantages over conventional materials such as externally bonded reinforcement（EBR） and near-surface mounted（NSM） strengthening techniques.This paper summarizes the results from 21 reinforced concrete beams strengthened with different methods,including externally-bonded and near-surface mounted FRP,to study the strain coordination of the FRP and steel rebar of the RC beam.Since there is relative slipping between the RC beam and the FRP,the strain of the FRP and steel rebar of the RC beam satisfy the quasi-plane-hypothesis;that is,the strain of the longitudinal fiber that parallels the neutral axis of the plated beam within the scope of the effective height（h 0） of the cross section is in direct proportion to the distance from the fiber to the neutral axis.The strain of the FRP and steel rebar satisfies the equation：ε FRP =βε steel,and the value of β is equal to 1.1-1.3 according to the test results.

EFFECTS AND MECHANISMS OF EXTRINSIC STRENGTHENING DURING AGING FOR AL ALLOY 2090+Ce

The influence of aging temperature and time on fracture feature of monotonic tensile samples of alumi-num-Iithium alloy 2090+Ce was investigated.The effects and mechanisms of extrinsic strengthening during aging for this alloy with a flat unrecrystallized structure were discussed.The mechanisms were analysed from four aspects.The theory of extrinsic strengthening from the delamination strengthening was presented.The results in this research show that the strength and ductility of aluminum-lithium alloy with a flat unrecrystallized structure are superior to those with recrystallized structure.Several reasons have been advanced for the ductility improvement effect of flat uncrystallized structure,including wedging action between flat grain,action of short-transverse delamination on impeding the growth of main crack,action on the reduction in the detrimental influence of weak grain boundaries and action on impeding the intergranular fracture on main fracture surface.The strengthening effect of flat uncrystallized structure is attributed to the extrinsic strengthening derived from delamination strengthening.From underage to peakage,the fracture mode of this alloy is transgranular fracture plus short-transverse delamination.The tendency of short-transverse delamination in creases with aging,thereby enhancing the delamination strengtheniag effect.Under overaging condition,the fracture mode is predominately intersubgranular,which results in the loss of delamination strengthening.

Strengthening mechanisms based on reinforcement distribution uniformity for particle reinforced aluminum matrix composites

A modified mixed strengthening model was proposed for describing the yield strength of particle reinforced aluminum matrix composites.The strengthening mechanisms of the composites were analyzed based on the microstructures and compression mechanical properties.The distribution uniformity of reinforcements and cooperation relationship among dislocation mechanisms were considered in the modified mixed strengthening model by introducing a distribution uniformity factor u and a cooperation coefficient fc,respectively.The results show that the modified mixed strengthening model can accurately describe the yield strengths of Al3Ti/2024Al composites with a relative deviation less than1.2%,which is much more accurate than other strengthening models.The modified mixed model can also be used to predict the yield strength of Al3Ti/2024Al composites with different fractions of reinforcements.

Strengthening mechanisms of indirect-extruded Mg-Sn based alloys at room temperature

The strength of a material is dependent on how dislocations in its crystal lattice can be easily propagated.These dislocations create stress fields within the material depending on their intrinsic character.Generally,the following strengthening mechanisms are relevant in wrought magnesium materials tested at room temperature:fine-grain strengthening,precipitate strengthening and solid solution strengthening as well as texture strengthening.The indirect-extruded Mg-8Sn(T8)and Mg-8Sn-1Al-1Zn(TAZ811)alloys present superior tensile properties compared to the commercial AZ31 alloy extruded in the same condition.The contributions to the strengthen of Mg-Sn based alloys made by four strengthening mechanisms were calculated quantitatively based on the microstructure characteristics,physical characteristics,thermomechanical analysis and interactions of alloying elements using AZ31 alloy as benchmark.