This paper presents high quality YBa_(2)Cu_(3)O_(7-δ)(YBCO)thin films on LaAlO_(3)substrate for microwave devices prepared by pulsed laser deposition(PLD).The double-sided YBCO films cover a large area and have been ...This paper presents high quality YBa_(2)Cu_(3)O_(7-δ)(YBCO)thin films on LaAlO_(3)substrate for microwave devices prepared by pulsed laser deposition(PLD).The double-sided YBCO films cover a large area and have been optimized for key parameters relevant to microwave device applications,such as surface morphology and surface resistance(R_(s)).This was achieved by improving the target quality and increasing the oxygen pressure during deposition,respectively.To evaluate the suitability of the YBCO films for microwave devices,a pair of microwave filters based on microstrip fabricated on films from this work and a commercial company were compared.The results show that the YBCO films in this work could completely meet the requirements for microwave devices.展开更多
The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and wi...The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and with multivariable nonlinear interaction of microwave and materials. The conventional PID control strategy incorporated with optimization GA was put forward to maintain the optimum drying temperature in order to keep the moisture content below 1%, whose adaptation ability included the cost function of optimization GA according to the output change. Simulations on five different industrial process models and practical temperature process control system for selenium-enriched slag drying intensively by using IMDRDWM were carried out systematically, indicating the reliability and effectiveness of control design. The parameters of proposed control design are all on-line implemented without iterative predictive calculations, and the closed-loop system stability is guaranteed, which makes the developed scheme simpler in its synthesis and application, providing the practical guidelines for the control implementation and the parameter design.展开更多
High bonding strength,low deformation and convenient procedure are all very important aspects in the microfluidic device fabrication process. In this paper,an improved microwave induced bonding technology is proposed ...High bonding strength,low deformation and convenient procedure are all very important aspects in the microfluidic device fabrication process. In this paper,an improved microwave induced bonding technology is proposed to fabricate microfluidic device based on methyl methacrylate( PMMA). This method employs pure ethanol as the bonding assisted solvent. The ethanol not only acts as the microwave absorbing material,but also works as the organic solvent in bath. The presented research work has shown that the bonding process can be completed in less than 45 s. Furthermore,the convenient bonding only applies microwave oven,beakers and binder clips. Then,we discuss effects of microwave power,bonding time on bonding strength and deformation of microstructures on PMMA microfluidic device. Finally,a 4 layers micro-mixer has been fabricated using the proposed bonding technique which includes 15 trapezoid micro-channels,9 T-type mix units and an X-type mix unit. Experimental results show that the proposed bonding method have some advantages compared with several traditional bonding technologies,such as hot pressing bonding,ultrasonic bonding and solvent assisted bonding methods in respect of bonding strength,deformation and bonding process. The presented work would be helpful for low coat mass production of multilayer polymer microfluidic devices in lab.展开更多
In this review,the advanced microwave devices based on the integrated passive device(IPD)technology are expounded and discussed in detail,involving the performance breakthroughs and circuit innovations.Then,the develo...In this review,the advanced microwave devices based on the integrated passive device(IPD)technology are expounded and discussed in detail,involving the performance breakthroughs and circuit innovations.Then,the development trend of IPD-based multifunctional microwave circuits is predicted further by analyzing the current research hot spots.This paper discusses a distinctive research area for microwave circuits and mobile-terminal radio-frequency integrated chips.展开更多
The phase and frequency locking of microwave, millimeter wave power combining were analysed and summarized in an all-round way. The master/slave phase locking of cavity oscillators, the peer phase locking of mutually ...The phase and frequency locking of microwave, millimeter wave power combining were analysed and summarized in an all-round way. The master/slave phase locking of cavity oscillators, the peer phase locking of mutually coupled oscillators, and the peer phase locking of ring-connected multiple oscillators were investigated. The results of numerical calculations, and the relations of phase to phase locking model and oscillator parameters were given. And the cavity and space power combining aspects for microwave and millimeter wave were presented.展开更多
Detailed mathematical modelling approaches that are used to describe the dynamic behaviour of magnetoelectric coupling in magnetostrictive-piezoelectric multiferroics at low-frequencies, in electromechanical resonance...Detailed mathematical modelling approaches that are used to describe the dynamic behaviour of magnetoelectric coupling in magnetostrictive-piezoelectric multiferroics at low-frequencies, in electromechanical resonance region and at microwave range are discussed. The ME （magnetoelectric） voltage coefficients were estimated from the known material parameters. The feasibility for creating new class of functional devices based on magnetoelectric interactions is addressed.展开更多
Radio frequency/microwave-directed energy sources using wide bandgap SiC photoconductive semiconductors have attracted much attention due to their unique advantages of high-power output and multi-parameter adjustable ...Radio frequency/microwave-directed energy sources using wide bandgap SiC photoconductive semiconductors have attracted much attention due to their unique advantages of high-power output and multi-parameter adjustable ability.Over the past several years,benefitting from the sustainable innovations in laser technology and the significant progress in materials technology,megawatt-class output power electrical pulses with a flexible frequency in the P and L microwave wavebands have been achieved by photoconductive semiconductor devices.Here,we mainly summarize and review the recent progress of the high-power photonic microwave generation based on the SiC photoconductive semiconductor devices in the linear modulation mode,including the mechanism,system architecture,critical technology,and experimental demonstration of the proposed high-power photonic microwave sources.The outlooks and challenges for the future of multi-channel power synthesis development of higher power photonic microwave using wide bandgap photoconductors are also discussed.展开更多
Developing high-efficiency photothermal seawater desalination devices is of significant importance in addressing the shortage of freshwater.Despite much effort made into photothermal materials,there is an urgent need ...Developing high-efficiency photothermal seawater desalination devices is of significant importance in addressing the shortage of freshwater.Despite much effort made into photothermal materials,there is an urgent need to design a rapidly synthesized photothermal evaporator for the comprehensive purification of complex seawater.Therefore,we report on all-in-one FeOx-rGO photothermal sponges synthesized via solid-phase microwave thermal shock.The narrow band gap of the semiconductor material Fe_(3)O_(4) greatly reduces the recombination of electron-hole pairs,enhancing non-radiative relaxation light absorption.The abundantπorbitals in rGO promote electron excitation and thermal vibration between the lattices.Control of the surface hydrophilicity and hydrophobicity promotes salt resistance while simultaneously achieving the purification of various complex polluted waters.The optimized GFM-3 sponge exhibitedan enhanced photothermal conversion rate of 97.3% and a water evaporation rate of 2.04 kg/(m^(2)·hr),showing promising synergistic water purification properties.These findings provide a highly efficient photothermal sponge for practical applicationsof seawater desalination and purification,as well as develop a super-rapid processing methodology for evaporation devices.展开更多
基金Project supported by the National Key Basic Research Program of China(Grant Nos.2022YFA1603903 and 2021YFA0718700)the Key-Area Research and Development Program of Guangdong Province,China(Grant No.2020B0101340002)+3 种基金the National Natural Science Foundation of China(Grant Nos.61971415,51972012,11927808,119611410,11961141008,and 12274439)the Strategic Priority Research Program(B)of Chinese Academy of Sciences(Grant No.XDB25000000)Beijing Natural Science Foundation(Grant No.Z190008)Basic Research Youth Team of Chinese Academy of Sciences(Grant No.2022YSBR-048).
文摘This paper presents high quality YBa_(2)Cu_(3)O_(7-δ)(YBCO)thin films on LaAlO_(3)substrate for microwave devices prepared by pulsed laser deposition(PLD).The double-sided YBCO films cover a large area and have been optimized for key parameters relevant to microwave device applications,such as surface morphology and surface resistance(R_(s)).This was achieved by improving the target quality and increasing the oxygen pressure during deposition,respectively.To evaluate the suitability of the YBCO films for microwave devices,a pair of microwave filters based on microstrip fabricated on films from this work and a commercial company were compared.The results show that the YBCO films in this work could completely meet the requirements for microwave devices.
基金Project(51090385) supported by the Major Program of National Natural Science Foundation of ChinaProject(2011IB001) supported by Yunnan Provincial Science and Technology Program,China+1 种基金Project(2012DFA70570) supported by the International Science & Technology Cooperation Program of ChinaProject(2011IA004) supported by the Yunnan Provincial International Cooperative Program,China
文摘The control design, based on self-adaptive PID with genetic algorithms(GA) tuning on-line was investigated, for the temperature control of industrial microwave drying rotary device with the multi-layer(IMDRDWM) and with multivariable nonlinear interaction of microwave and materials. The conventional PID control strategy incorporated with optimization GA was put forward to maintain the optimum drying temperature in order to keep the moisture content below 1%, whose adaptation ability included the cost function of optimization GA according to the output change. Simulations on five different industrial process models and practical temperature process control system for selenium-enriched slag drying intensively by using IMDRDWM were carried out systematically, indicating the reliability and effectiveness of control design. The parameters of proposed control design are all on-line implemented without iterative predictive calculations, and the closed-loop system stability is guaranteed, which makes the developed scheme simpler in its synthesis and application, providing the practical guidelines for the control implementation and the parameter design.
文摘High bonding strength,low deformation and convenient procedure are all very important aspects in the microfluidic device fabrication process. In this paper,an improved microwave induced bonding technology is proposed to fabricate microfluidic device based on methyl methacrylate( PMMA). This method employs pure ethanol as the bonding assisted solvent. The ethanol not only acts as the microwave absorbing material,but also works as the organic solvent in bath. The presented research work has shown that the bonding process can be completed in less than 45 s. Furthermore,the convenient bonding only applies microwave oven,beakers and binder clips. Then,we discuss effects of microwave power,bonding time on bonding strength and deformation of microstructures on PMMA microfluidic device. Finally,a 4 layers micro-mixer has been fabricated using the proposed bonding technique which includes 15 trapezoid micro-channels,9 T-type mix units and an X-type mix unit. Experimental results show that the proposed bonding method have some advantages compared with several traditional bonding technologies,such as hot pressing bonding,ultrasonic bonding and solvent assisted bonding methods in respect of bonding strength,deformation and bonding process. The presented work would be helpful for low coat mass production of multilayer polymer microfluidic devices in lab.
基金Beijing Natural Science Foundation(No.JQ19018)National Natural Science Foundations of China(No.U20A20203 and No.61971052)National Special Support Program for High-Level Personnel Recruitment(No.2018RA2131)。
文摘In this review,the advanced microwave devices based on the integrated passive device(IPD)technology are expounded and discussed in detail,involving the performance breakthroughs and circuit innovations.Then,the development trend of IPD-based multifunctional microwave circuits is predicted further by analyzing the current research hot spots.This paper discusses a distinctive research area for microwave circuits and mobile-terminal radio-frequency integrated chips.
基金Supported by the National Natural Science Foundation of China
文摘The phase and frequency locking of microwave, millimeter wave power combining were analysed and summarized in an all-round way. The master/slave phase locking of cavity oscillators, the peer phase locking of mutually coupled oscillators, and the peer phase locking of ring-connected multiple oscillators were investigated. The results of numerical calculations, and the relations of phase to phase locking model and oscillator parameters were given. And the cavity and space power combining aspects for microwave and millimeter wave were presented.
文摘Detailed mathematical modelling approaches that are used to describe the dynamic behaviour of magnetoelectric coupling in magnetostrictive-piezoelectric multiferroics at low-frequencies, in electromechanical resonance region and at microwave range are discussed. The ME （magnetoelectric） voltage coefficients were estimated from the known material parameters. The feasibility for creating new class of functional devices based on magnetoelectric interactions is addressed.
基金supported in part by the National Natural Science Foundation of China(Nos.62071477 and 62101577)the Natural Science Foundation of Hunan Province(No.2021JJ40660)。
文摘Radio frequency/microwave-directed energy sources using wide bandgap SiC photoconductive semiconductors have attracted much attention due to their unique advantages of high-power output and multi-parameter adjustable ability.Over the past several years,benefitting from the sustainable innovations in laser technology and the significant progress in materials technology,megawatt-class output power electrical pulses with a flexible frequency in the P and L microwave wavebands have been achieved by photoconductive semiconductor devices.Here,we mainly summarize and review the recent progress of the high-power photonic microwave generation based on the SiC photoconductive semiconductor devices in the linear modulation mode,including the mechanism,system architecture,critical technology,and experimental demonstration of the proposed high-power photonic microwave sources.The outlooks and challenges for the future of multi-channel power synthesis development of higher power photonic microwave using wide bandgap photoconductors are also discussed.
基金supported by the National Natural Science Foundation of China(No.22106105)the Innovation Program of Shanghai Municipal Education Commission(No.2019–01–07–00-E00015)+4 种基金the Shanghai Scientific and Technological Innovation Project(Nos.21DZ1206300 and 19JC1410402)the Scientific and Technological Innovation Team for Green Catalysis and Energy Material in Yunnan Institutions of Higher Learning,General Project of Yunnan Province Science and Technology Department(No.202101BA070001–050)the Central Guidance on Local Science and Technology Development Fund of Shanghai(No.YDZX20213100003002)the Science and Technology Commission of Shanghai Municipality(No.20060502200)the Program for Professor of Special Appointment(Eastern Scholar)at Shanghai Institutions of Higher Learning,and Shanghai Sailing Program(No.20YF1432200)。
文摘Developing high-efficiency photothermal seawater desalination devices is of significant importance in addressing the shortage of freshwater.Despite much effort made into photothermal materials,there is an urgent need to design a rapidly synthesized photothermal evaporator for the comprehensive purification of complex seawater.Therefore,we report on all-in-one FeOx-rGO photothermal sponges synthesized via solid-phase microwave thermal shock.The narrow band gap of the semiconductor material Fe_(3)O_(4) greatly reduces the recombination of electron-hole pairs,enhancing non-radiative relaxation light absorption.The abundantπorbitals in rGO promote electron excitation and thermal vibration between the lattices.Control of the surface hydrophilicity and hydrophobicity promotes salt resistance while simultaneously achieving the purification of various complex polluted waters.The optimized GFM-3 sponge exhibitedan enhanced photothermal conversion rate of 97.3% and a water evaporation rate of 2.04 kg/(m^(2)·hr),showing promising synergistic water purification properties.These findings provide a highly efficient photothermal sponge for practical applicationsof seawater desalination and purification,as well as develop a super-rapid processing methodology for evaporation devices.
