Comparison of Mineral Contents in Three Different Tobacco Formulations

We identified and quantified a variety of mineral elements in 18 tobacco samples purchased from a Tunisian market. In total, 25 mineral elements have been measured in cigarettes, water pipe tobacco, and smokeless tobacco using inductively coupled plasma-optical emission spectroscopy following microwave-assisted digestion. Statistical analyses were performed using SPSSTM, version 18.0. The lowest concentrations of all studied elements were observed in water pipe tobacco. Significantly higher concentrations of Al, Fe, Mg, Na, Ca, Cr, and Co were found in smokeless tobacco, while cigarettes brands contained the highest concentrations of K, Mn, Ni, Ba, and Sr. There was no significant difference between the mineral contents of local and foreign cigarettes and conventional and light cigarettes. Our findings demonstrated that local smokeless tobacco appears to be the most hazardous tobacco type. The concentration of minerals in light cigarettes was not significantly different from the concentration in conventional cigarettes.

Winter Wheat Salt Tolerance Appraisal Indices with Varied Mineral Content of Saline Water

[Objective] The aim was to study wheat salt resistance appraisal indicators under the condition of saline water irrigation.[Method] A trial was conducted with five varieties irrigated with saline water at 1,2,4,6,and 8 g/L during 2009-2010 and 2010-2011 in the research station of Dry-land Farming Institute of Hebei Academy of Agricultural and Forestry Sciences.With standardized indicators for measuring treatment,the response relations among different salt stress levels and winter wheat growth index were analyzed in this study.[Result] Under the condition of different salinity of irrigation,relative plant height after jointing stage,relative leaf area index,relative dry matter weight,relative ear number per unit area showed significant differences among treatments and yield showed significant correlation,which can be taken as salt-resistance examination index of wheat.[Conclusion] The results showed that the relative height after jointing stage was recommended as the most practical salt-tolerance appraisal indices,because it was easy to be observed and sensitive to salt stress.

Effect of sex and rearing system on the quality and mineral content of fiber from raeini cashmere goats

The aim of this study was to compare the quality characteristics and mineral content of the fiber from male and female cashmere goats raised under different management systems. Male and female Raeini cashmere goats （〈1.5 years of age, n=48） were selected from flocks raised at a government breeding station or raised commercially under either rural or nomadic conditions. The staple length, cashmere fiber diameter, coefficient of variation for fiber diameter, percentage of cashmere in a fleece, percentage of guard hair in a fleece and cashmere tenacity averaged 4.6 ±0.1 cm, 18.0 ±0.1 um, 20.9±0.4%, 66.1 ± 1.5%, 33.8± 1.5% and 1.8±0.2 gf/tex, respectively. The sulfur, copper and zinc content of the cashmere averaged 2.8 ± 0.1%, 0.00065 ± 0.00002% and 0.01276 ± 0.00025%, respectively. Rearing method significantly affected staple length, coefficient of variation of fiber diameter, cashmere tenacity and copper content. Males had a higher coefficient of variation of fiber diameter and cashmere tenacity than females （P 〈 0.05）.

Physicochemical properties, fatty acid and mineral content of some walnuts (Juglans regia L.) types

Some physical and chemical properties, mineral content and fatty acid compositions of kernel and oils of several walnut types (Büyük Oba, Kaman2, Kaman5) were determined. The oil yields from these kernels changed between 61.4% to 72.8%. The crude fibre contents of ker nels ranged between 3.77% and 3.80%. In add ition, crude protein contents of kernels ranged between 7.05% and 8.10%. While the peroxide values of kernel oils change between 3.18 meq/ Kg and 3.53 meq/Kg, acidity values ranged be tween 0.35% and 0.56%. The main fatty acids of walnut kernel oils were oleic, linoleic, linolenic and palmitic acids. Linoleic acid contents of ker nel oils varied between 49.7% and 55.5%. On the other hand, oleic acid contents ranged between 20.5% and 26.4%. As a result, the present study showed the walnut kernels of the researched species of walnut kernels from Turkey are a potential source of valuable oil which might be used for edible and other industrial applica tions.

RNAi-Mediated Silencing of ITPK Gene Reduces Phytic Acid Content,Alters Transcripts of Phytic Acid Biosynthetic Genes,and Modulates Mineral Distribution in Rice Seeds

Phytic acid is the principal storage form of phosphorus in plant seeds and an essential signalling molecule in several regulatory processes of plant development.However,it is known as an anti-nutrient compound owing to its potent chelating property.Thus,reducing the phytic acid content in crops is desirable.Studies involving regulation of MIPS and IPK1 genes to generate low phytate rice have been reported earlier.However,the functional significance of OsITPK and the effect of its down-regulation on phytic acid content and the associated pleiotropic effects on rice have not yet been investigated.In this study,tissue specific RNA interference(RNAi)-mediated down-regulation of a major ITPK homolog(OsITP5/6K-1)resulted in 46.2%decrease in phytic acid content of T2 transgenic seeds with a subsequent 3-fold enhancement in the inorganic phosphorus content.Silencing of OsITP5/6K-1 altered the transcript levels of essential phytic acid pathway genes,without significantly affecting the transcript levels of other OsITPK homologs.Furthermore,the mapping of elements through X-ray microfluorescence analysis revealed significant changes in the spatial distribution pattern and translocation of elements in low phytate seeds.Additionally,low phytate polished seeds exhibited 1.3-fold and 1.6-fold enhancement in iron and zinc content in the grain endosperm,respectively.Silencing of OsITP5/6K-1 also altered the amino acid and myo-inositol content of the transgenic seeds.Our results successfully established that RNAi-mediated silencing of OsITP5/6K-1 gene significantly reduced the phytate levels in seeds without hampering the germination potential of seeds and plant growth.The present study provided an insight into the mechanism of phytic acid biosynthesis pathway.

Effect of Se-S Cooperated Application on the Mineral Content and Nutrition Quality of Garlic （Allium Sativum L.）

Eleven nutrition elements and 5 quality elements of garlic （Allium sativum L.） in different Se, S level and their interaction pot experiments were analyzed by atom absorbing spectrophotometer, titration and fixing sulfur method. The mineral elements were analyzed by the Principal Component Analysis and the Factor Analysis on the SPSS 10.0 and three main factors were picked. The results showed that Se, S and Se-S cooperated application enhanced the garlic nutrition quality by increasing mineral nutrition. The garlic Vc was the highest after using higher Se compared middle S level （S 20 mg/kg soil ＋ Se 40 mg/kg soil）. Lower Se level compared middle S level （S 40 mg/kg soil ＋ Se 20 mg/kg soil） get the highest garlic abio-Se in all treatments. The garlic organic Se content was the highest after using higher Se compared middle S （S 40 mg/kg soil ＋ Se 40 mg/kg soil）. The treatment lower S compared lower Se level get the highest garlic allicin in all treatment. It showed that the fresh eating factor was affected by the element Se. The flavor factor and health care factor were affected by both Se and S.

Macro-and Microelement Contents of Fruiting Bodies of Wild-Edible Mushrooms Growing in the East Black Sea Region of Turkey

Eleven different wild-edible mushroom species growing in the Black Sea region of Turkey were analysed for their metal content. Specimens of mushrooms were gathered in Trabzon, Giresun and Ordu and analyzed for 31 minerals, four of which (Be, Sb, Te and Ti) were not detected. Whereas some minerals including Ag, As, Cd, La, Mo, Pb, Se, Y and Zr were detected in just a few mushroom species, another 18 minerals were found in all 11 species. All metal concentrations were expressed on a dry weight basis (d.w.). With regard to nutritionally important amounts of essential and trace minerals, the metal content (μg/g d.w.) of mushroom samples ranged from 21,800-39,800 for K, 2590-14,000 for P, 268-1600 for Ca, 561-1210 for Mg, 74-829 for Fe, 11.2-321 for Cu, 36.2-241 for Zn, 14.1-76.5 for Mn and 0.13-2.85 for Co. Small amounts of toxic metals such as As, Cd and Pb were found in all 11 mushroom species. L. laccata contained a large amount of As (145 μg/g d.w.). These results show that the investigated mushrooms can be a useful component for human diets because of their high content of many essential minerals and trace elements and low content of toxic metals.

Study of Suspended Sediment and Its Mineral Content Analysis with Impact on Hydropower Design： A Case Study of Rahughat Hydroelectric Project

Rahughat Hydroelectric Project is an ROR （run of river） project with the installed capacity of 40 MW. The suspended sediment study was carried out in 2008 and 2015 AD. The present study is concentrated on the study carried out in 2015 AD. The suspended sediment samples were collected in the headworks site and its analysis was done in Hydro Lab Pvt. Ltd. Concentration analysis, PSD （particle size distribution） analysis and mineral content analysis were carried out. The minimum and maximum sediment concentration is 54 PPM and 3,759 PPM respectively. The PSD analysis shows that 52% of the suspended sediment contained sand fraction and 48% is fine sediments. The mineral content analysis shows presence of quartz, feldspar, mica, kyanite, garnet, carbonates, chlorite, clay and some fragments of shale, phyllite and slate with few unidentified sediments. The proposed desander in RGHEP is designed to settle particles of size 0.2 mm and above. The sediments lesser than 0.2 mm size that reach the turbine may affect the loss of turbine material due to erosion.

Development and Testing of a Method to Estimate the Mineral Composition of Ore from Chemical Assays with a View toward Geometallurgy: Application to an Iron Ore Concentrator

For complex orebodies in which the valuable metal is carried by several minerals that respond differently to the concentration process, an ore block model should not be characterized solely with elemental assays, as this information is not sufficient to anticipate the mill performances. Data from an iron ore concentrator is used to demonstrate the idea. A method is then proposed to estimate the mineral contents of ore samples from elemental assays. The method can readily be extended to combine the estimation of the mineral contents in the feed of the mill with an estimation of the recovery of these minerals into the products of the concentrator. These mineral recoveries can subsequently be incorporated into a block model to predict the concentrator response to the processing of an ore block.

Integrated Use of Organic and Bio-fertilizers to Improve Yield and Fruit Quality of Olives Grown in Low Fertility Sandy Soil in an Arid Environment

Olive productivity should be improved through stimulating nutrition,particularly under poor fertility soils.Consequently,the objective of this study was to assess the efficacy of applying organic and bio-fertilizers on the physiological growth,yield and fruit quality of olive trees under newly reclaimed poor-fertility sandy soil in an arid environment.During a field experiment carried out at El-Qantara,North Sinai,Egypt over two consecutive seasons(2019-2020 and 2020-2021),olive Kalamata trees were evaluated under three organic fertilizer treatments alone or in combination with three bio-fertilizers treatments.Organic fertilizer was applied as goat manure(16.8 kg/tree/year),or olive pomace(8.5 kg/tree/year)in mid-December of each season vs.untreated trees.The bio-fertilizers were applied as N-fixing bacteria(150 g/tree)was inculated in early March of each season,or amino acid mixture(1.5%)was applied three times,at 70%of full bloom,21 days after full bloom,and a month later in comparison to a non-fertilized trees(control).The cultivar used was Kalamata,a dual-purpose cultivar for oil and table olives whose value increases when processed as table olives.The results indicated that the goat manure followed by olive pomace significantly enhanced photosynthetic pigments(chlorophyll a,b,and carotenoids),leaf mineral contents(N,P,K,Ca,Mg and Fe),tree canopy volume,number of flowers per inflorescence,number of inflorescences per shoot,initial fruit set,fruit retention.For fruit quality,fruit length and width,fruit weight,and total fruit yield was increased compared to the non-fertilized control.Likewise,The bio-fertilizer N-fixing bacteria followed by the amino acid mixture significantly improved all of the aforementioned parameters.Accordingly,it is recommended,both environmentally and economically to utilize organic and bio-fertizers,particularly goat manure combined with N-fixing bacteria,in low-fertility soil to sustain olive production as well as reducing mineral fertilization.

The Effect of Storage Solutions on Mineral Content of Enamel

Purpose: This study evaluated the influence of different storage times and storage solutions on the mineral content of enamel. Methods: Ninety enamel slabs were randomly divided into 2 groups of 45: a 45-day group and a 90-day group. Each of these main groups was further subdivided into 9 experimental groups of 5 slabs, and each subgroup was stored in a different storage solution. The mean percentage weights of 5 elements (calcium, potassium, sodium, phosphorus, and magnesium) presented in each enamel slab was measured after storage using inductively coupled plasmaatomic emission spectrometry. Two-way analysis of variance (ANOVA) and Turkey’s honestly significant difference tests were used to analyze differences between the groups. Results: Storage conditions significantly affected the levels of calcium, potassium, sodium, and phosphorus (p 0.05). Storage procedures can significantly affect the calcium, potassium, sodium, and phosphorus contents of enamel.

Effect of fertigation frequency on soil nitrogen distribution and tomato yield under alternate partial root-zone drip irrigation

Alternate partial root-zone drip fertigation (ADF) is a combination of alternating irrigation and drip fertigation,with the potential to save water and increase nitrogen (N) fertilizer efficiency.A 2-year greenhouse experiment was conducted to evaluate the effect of different fertigation frequencies on the distribution of soil moisture and nutrients and tomato yield under ADF.The treatments included three ADF frequencies with intervals of 3 days (F3),6 days (F6) and 12 days (F12),and conventional drip fertigation as a control (CK),which was fertilized once every 6 days.For the ADF treatments,two drip tapes were placed 10 cm away on each side of the tomato row,and alternate drip irrigation was realized using a manual valve on the distribution tapes.For the CK treatment,a drip tape was located close to the roots of the tomato plants.The total N application rate of all treatments was 180 kg ha^(-1).The total irrigation amounts applied to the CK treatment were450.6 and 446.1 mm in 2019 and 2020,respectively;and the irrigation amounts applied to the ADF treatments were 60%of those of the CK treatment.The F3 treatment resulted in water and N being distributed mainly in the 0–40-cm soil layer with less water and N being distributed in the 40–60-cm soil layer.The F6 treatment led to 21.0 and 29.0%higher 2-year average concentration of mineral N in the 0–20 and 20–40-cm soil layer,respectively and a 23.0%lower N concentration in the 40–60-cm soil layer than in the CK treatment.The 2-year average tomato yields of the F3,F6,F12,and CK treatments were 107.5,102.6,87.2,and 98.7 t ha^(-1),respectively.The tomato yield of F3 was significantly higher (23.3%) than that in the F12 treatment,whereas there was no significant difference between the F3 and F6 treatment.The F6 treatment resulted in yield similar to the CK treatment,indicating that ADF could maintain tomato yield with a 40%saving in water use.Based on the distribution of water and N,and tomato yield,a fertigation frequency of 6 days under ADF should be considered as a water-saving strategy for greenhouse tomato production.

A review on experimental techniques and their applications in the effects of mineral content on geomechanical properties of reservoir shale rock

Understanding the effects of mineral composition on geomechanical characteristics is critical in order to design and optimize the hydraulic fracturing necessary for shale gas reservoir production.Fundamental information is still missing in effects of mineral content and the experimental methodologies used.This paper provided an in-depth assessment of the various experimental methodologies and their applications in the relationship between the mineralogical and geomechanical features of the shale formation.The results revealed that more brittle minerals increase their strength,but chemical reaction that creats pores decrease their strength.High content of carbonate or quartz increases a rock's brittleness,while a high content of clay increases a rock's plasticity and decreases its brittleness.As phyllosilicate content increases,the uniaxial compressive strength decreases,and this could be because phyllosilicate minerals have a weakening effect on the mineral bond.Young's modulus often climb as clay minerals decline and as silica with carbonate concentration rises,however Poisson's ratio increases in relation to an increase in clay minerals,which also increases the ductility of the reservoir shale rock.However,compared to minerals and matrix,does not significantly impact the strength of shale rock.Besides,the benefits and drawbacks of using uniaxial and triaxial compression,ultrasonic testing,and nano-indentation techniques in unconventional reservoirs were described.The findings suggest that,because of the possibility for experimental testing repeatability for increased accuracy,ultrasonic testing is the most appropriate experimental approach in the scenes of assessing static and dynamic geomechanical properties of reservoir shale rock.We suggested that numerically-based simulation of experimental techniques used for shale geomechanical evaluations and numer-ical modeling of heterogeneous shale rock samples will be necessary in light of the limitations faced in the ap-plications of experimental techniques for shale geomechanical evaluation.

Properties of Apricot Kernel and Oils as Fruit Juice Processing Waste

Recently, more attention has been focused on the utilization of food processing by products and wastes, as well as under-utilization agricultural products. Some physical and chemical properties, mineral contents and fatty acid composition of apricot kernel and oils were determined. The oil yields from kernels changed from 42.2% to 57.2%. The crude fibre contents ranged between 4.06% and 7.63%. In addition, crude protein contents ranged between 15.1% and 24.2%. While the peroxide values of kernel oils change between 0.834 meq/Kg and 8.294 meq/Kg, acidity values ranged between 0.279% and 0.700%. The main fatty acids in apricot kernel oils were oleic, linoleic and palmitic acids. Oleic acid contents of kernel oils varied between 53.06% and 70.90%. On the other hand, linoleic acid contents ranged between 21.43% and 35,67%. As a result, the present study showed the apricot kernels of the researched species of apricot kernels from Turkey are a potential source of valuable oil which might be used for edible and other industrial applications.

Fruit Yield and Quality, and Irrigation Water Use Efficiency of Summer Squash Drip-Irrigated with Different Irrigation Quantities in a Semi-Arid Agricultural Area

Fruit yield, yield components, fruit mineral content, total phenolic content, antioxidant activity and irrigation water use efifciency （IWUE） of summer squash responses to different irrigation quantities were evaluated with a ifeld study. Irrigations were done when the total evaporated water from a Class A pan was about 30 mm. Different irrigation quantities were adjusted using three different plant-pan coefifcients （Kcp, 100% （Kcp1）, 85% （Kcp2） and 70% （Kcp3））. Results indicated that lower irrigation quantities provided statistically lower yield and yield components. The highest seasonal fruit yield （80.0 t ha-1） was determined in the Kcp1 treatment, which applied the highest volume of irrigation water （452.9 mm）. The highest early fruit yield, average fruit weight and fruit diameter, length and number per plant were also determined in the Kcp1 treatment, with values of 7.25 t ha-1, 264.1 g, 5.49 cm, 19.95 cm and 10.92, respectively. Although the IWUE value was the highest in the Kcp1 treatment （176.6 kg ha-1 mm-1）, it was statistically similar to the value for Kcp3 treatment （157.1 kg ha-1 mm-1）. Total phenolic content and antioxidant activity of fruits was higher in the Kcp1 （44.27 μg gallic acid equivalents （GAE） mg-1 fresh sample） and in the Kcp2 （84.75%） treatments, respectively. Major （Na, N, P, K, Ca, Mg and S） and trace （Fe, Cu, Mn, Zn and B） mineral contents of squash fruits were the highest in the Kcp2 treatment, with the exception of P, Ca and Cu. Mineral contents and total phenolic content were signiifcantly affected by irrigation quantities, but antioxidant activity was not affected. It can be concluded that the Kcp1 treatment was the most suitable for achieving higher yield and IWUE. However, the Kcp2 treatment will be the most suitable due to the high fruit quality and relatively high yield in water shortage conditions.

Grafting Enhances Copper Tolerance of Cucumber Through Regulating Nutrient Uptake and Antioxidative System

An experiment was carried out to determine plant growth, mineral uptake, lipid peroxidation, antioxidative enzymes, and antioxidant of cucumber plants （Cucumis sativus L. cv. Xintaimici） under copper stress, either ungrafted or grafted onto the rootstock （Cucurbitaficifolia）. Excess Cu inhibited growth, photosynthesis, and pigment synthesis of grafted and ungrafted cucumber seedlings and significantly increased accumulation of Cu in roots besides reducing mineral uptake. Cu concentration in roots of grafted cucumber plants was significantly higher than that of ungrafted plants and obviously lower in leaves. The accumulation of reactive oxygen species （ROS） significantly increased in cucumber leaves under Cu stress and resulted in lipid peroxidation, and the levels of ROS and lipid peroxidation were greatly decreased by grafting. Activities of protective enzymes （superoxide dismutase, SOD; peroxidase, POD; catalase, CAT; ascorbate peroxidase, APX; dehydroascorbate reductase, DHAR; glutathione reductase, GR） and the contents of ascorbate and glutathione in leaves of grafted plants were significantly higher than those of ungrafted plants under Cu stress. Better performance of grafted cucumber plants were attributed to the higher ability of Cu accumulation in their roots, better nutrient status, and the effective scavenging system of ROS.

A mathematical model of cortical bone remodeling at cellular level under mechanical stimulus

A bone cell population dynamics model for cor- tical bone remodeling under mechanical stimulus is devel- oped in this paper. The external experiments extracted from the literature which have not been used in the creation of the model are used to test the validity of the model. Not only can the model compare reasonably well with these ex- perimental results such as the increase percentage of final values of bone mineral content （BMC） and bone fracture en- ergy （BFE） among different loading schemes （which proves the validity of the model）, but also predict the realtime devel- opment pattern of BMC and BFE, as well as the dynamics of osteoblasts （OBA）, osteoclasts （OCA）, nitric oxide （NO） and prostaglandin E2 （PGE2） for each loading scheme, which can hardly be monitored through experiment. In conclusion, the model is the first of its kind that is able to provide an in- sight into the quantitative mechanism of bone remodeling at cellular level by which bone cells are activated by mechan- ical stimulus in order to start resorption/formation of bone mass. More importantly, this model has laid a solid foun- dation based on which future work such as systemic control theory analysis of bone remodeling under mechanical stimu- lus can be investigated. The to-be identified control mecha- nism will help to develop effective drugs and combined non- pharmacological therapies to combat bone loss pathologies. Also this deeper understanding of how mechanical forces quantitatively interact with skeletal tissue is essential for the generation of bone tissue for tissue replacement purposes in tissue engineering.

Microwave response characteristics and influencing factors of ores based on dielectric properties of synthetic samples

In order to understand the influence of different factors on the microwave response characteristics of ores,the effects of electrical conductivity,metal mineral content,compactness,metal mineral distribution,microwave frequency and temperature on the dielectric properties of synthetic ores(metal mineral and quartz)were studied.Microwave heating tests were carried out on three types of natural ores(Hongtoushan copper ore,Sishanling iron ore and Dandong gold ore)with significant differences in metal mineral contents.The test results showed that under microwave irradiation,the stronger the electrical conductivity of the metal minerals,the smaller the penetration depth in synthetic ore.For those metal minerals with lower electrical conductivity,the microwave absorption coefficient of the synthetic samples increases with increasing metal mineral content.For those metal minerals with higher electrical conductivity,the microwave absorption coefficient of the samples first increases and then decreases as the metal mineral content increases.When the metal minerals are distributed in layers,the penetration depth is much less than that given a uniform distribution.The penetration depth in the sample at microwave frequency of 915 MHz is greater than that at 2.45 GHz.The higher the electrical conductivity of metal minerals used in synthetic ores,the higher the high-temperature sensitivity of electromagnetic shielding coefficient(0.C-500.C).The Hongtoushan copper ore with high metal mineral content exhibits obvious size effect.The effects of ore structure and crystal particle size on the distribution characteristics of microcracks were discussed.Based on the test results,a quantitative prediction model of microwave sensitivity of ore was proposed,which provides guidance for the prediction of ore heating effect and the selection of microwave heating sequence of ore.