This research work investigated the modeling of Von Mises stress in LNG Spherical Carbon Steel Storage tank using assumed displacement Finite Element analysis based on shallow shell triangular elements. Using equation...This research work investigated the modeling of Von Mises stress in LNG Spherical Carbon Steel Storage tank using assumed displacement Finite Element analysis based on shallow shell triangular elements. Using equations of elasticity, constant thickness carbon steel spherical storage tanks were subjected to different loading conditions. This paper stresses the need for proper definition of shallow element using sector angles to obtain the shallowness. The shallow spherical triangular element has five degrees of freedom at each of its corner node, which are the essential external degrees of freedom. The assumed displacement fields of these shallow triangular elements satisfied the exact requirement of rigid body modes of motion. The FORTRAN 90 programming language was used for the programme coding to solve finite element equations resulting from the model while Von Mises stresses distribution within the spherical storage tank shell subjected to different internal pressures were determined. The results showed that the use of non-shallow elements due to improper sector angles resulted in unreliable results while real shallow elements produced results that tallied with ASME Section VIII Div 1, Part UG values.展开更多
Road tankers are the most used means of transporting petroleum product to end users due to its cost effectiveness and energy-efficiency. The cylindrical tank has been well designed for by ASME VIII divisions 1 and 2 u...Road tankers are the most used means of transporting petroleum product to end users due to its cost effectiveness and energy-efficiency. The cylindrical tank has been well designed for by ASME VIII divisions 1 and 2 using analytical equations. Petrol tankers are not circular but elliptical probably for stability during transportation. This paper has used the finite element method to investigate in-plane displacements and Von-Mises stresses in both circular and elliptical cylindrical tanks under full loading. An elliptical OANDO? tanker of 66.78 m3volume and shell thickness of0.2 mmand an equivalent volume circular cylindrical tank was used for the simulation. MATLAB? was used to generate geometrical mesh model of the petroleum tankers, extract element coordinates and conduct the finite element analysis. Plane strain condition was used in analyzing a section of the petroleum tanker. It was observed that an equivalent volume circular cylindrical tank was under a higher internal pressure (16,858 N/m2) compared to the elliptical cylinder (14,480 N/m2). Von-Mises stress and in-plane displacements showed direct linear relationships with internal fluid pressure. Von-Mises stress in the elliptical tank was found to be lower (5.7 × 106 N/m2) than for the circular tank (8 × 106 N/m2). In plane displacements was zero in the longitudinal direction for both tanks and of the order of 10-4 mm in the y-direction for both tanks with the circular larger by about 2.5 × 10-3 cm. So in addition to tank stability on the lorry, the Von-Mises stresses were lower as well for the elliptical tank. It was also observed that Von-Mises stresses were far below the yield stress of the steel plate. However, the effect of weldment area on lowering of yield stress was not studied. Stress values were validated using analytical method and found to be insignificantly different (P > 0.05).展开更多
文摘This research work investigated the modeling of Von Mises stress in LNG Spherical Carbon Steel Storage tank using assumed displacement Finite Element analysis based on shallow shell triangular elements. Using equations of elasticity, constant thickness carbon steel spherical storage tanks were subjected to different loading conditions. This paper stresses the need for proper definition of shallow element using sector angles to obtain the shallowness. The shallow spherical triangular element has five degrees of freedom at each of its corner node, which are the essential external degrees of freedom. The assumed displacement fields of these shallow triangular elements satisfied the exact requirement of rigid body modes of motion. The FORTRAN 90 programming language was used for the programme coding to solve finite element equations resulting from the model while Von Mises stresses distribution within the spherical storage tank shell subjected to different internal pressures were determined. The results showed that the use of non-shallow elements due to improper sector angles resulted in unreliable results while real shallow elements produced results that tallied with ASME Section VIII Div 1, Part UG values.
文摘Road tankers are the most used means of transporting petroleum product to end users due to its cost effectiveness and energy-efficiency. The cylindrical tank has been well designed for by ASME VIII divisions 1 and 2 using analytical equations. Petrol tankers are not circular but elliptical probably for stability during transportation. This paper has used the finite element method to investigate in-plane displacements and Von-Mises stresses in both circular and elliptical cylindrical tanks under full loading. An elliptical OANDO? tanker of 66.78 m3volume and shell thickness of0.2 mmand an equivalent volume circular cylindrical tank was used for the simulation. MATLAB? was used to generate geometrical mesh model of the petroleum tankers, extract element coordinates and conduct the finite element analysis. Plane strain condition was used in analyzing a section of the petroleum tanker. It was observed that an equivalent volume circular cylindrical tank was under a higher internal pressure (16,858 N/m2) compared to the elliptical cylinder (14,480 N/m2). Von-Mises stress and in-plane displacements showed direct linear relationships with internal fluid pressure. Von-Mises stress in the elliptical tank was found to be lower (5.7 × 106 N/m2) than for the circular tank (8 × 106 N/m2). In plane displacements was zero in the longitudinal direction for both tanks and of the order of 10-4 mm in the y-direction for both tanks with the circular larger by about 2.5 × 10-3 cm. So in addition to tank stability on the lorry, the Von-Mises stresses were lower as well for the elliptical tank. It was also observed that Von-Mises stresses were far below the yield stress of the steel plate. However, the effect of weldment area on lowering of yield stress was not studied. Stress values were validated using analytical method and found to be insignificantly different (P > 0.05).
