Frequency-tunable microwave signal generation is proposed and experimentally demonstrated with a dual-wavelength single-longitudinal-mode （SLM） erbium-doped fiber ring laser based on a digital Opto-DMD processor and...Frequency-tunable microwave signal generation is proposed and experimentally demonstrated with a dual-wavelength single-longitudinal-mode （SLM） erbium-doped fiber ring laser based on a digital Opto-DMD processor and four-wave mixing （FWM） in a high-nonlinear photonic crystal fiber （PCF）. The high-nonlinear PCF is employed for the generation of the FWM to obtain stable and uniform dual-wavelength oscillation. Two different short passive sub-ring cavities in the main ring cavity serve as mode filters to make SLM lasing. The two lasing wavelengths are electronically selected by loading different gratings on the Opto-DMD processor controlled with a computer. The wavelength spacing can be smartly adjusted from 0.165 nm to 1.08 nm within a tuning accuracy of 0.055 nm. Two microwave signals at 17.23 GHz and 27.47 GHz are achieved. The stability of the microwave signal is discussed. The system has the ability to generate a 137.36-GHz photonic millimeter signal at room temperature.展开更多
对于转速变化的旋转机械,常规的频谱分析方法不能反映其振动信号的真实状态;同时,在转速变化剧烈的情况下,传统阶次分析仪器采用的转速脉冲到达时刻测量方法精度不高。针对以上问题,采用基于定点DSP的计算阶次跟踪方法,通过TMS320C5402...对于转速变化的旋转机械,常规的频谱分析方法不能反映其振动信号的真实状态;同时,在转速变化剧烈的情况下,传统阶次分析仪器采用的转速脉冲到达时刻测量方法精度不高。针对以上问题,采用基于定点DSP的计算阶次跟踪方法,通过TMS320C5402定时器的精确计时功能实现高精度转速脉冲到达时刻的测量,同时利用DSP的McBSP(Multi-channel Buffered Serial Port,多通道缓冲串行口)同步采集振动信号,实现混合信号的采集和处理,完成基于DSP的实时阶次跟踪,并通过变速箱启动的实例验证了算法的有效性。展开更多
基金supported by the National Basic Research Program of China(Grant No.2010CB327605)the Specialized Research Fund for the Doctoral Program of Higher Education,China(Grant No.20120005120021)+2 种基金the Fundamental Research Funds for the Central Universities,China(Grant No.2013RC1202)the Program for New Century Excellent Talents in University,China(Grant No.NECT-11-0596)the Beijing Nova Program,China(Grant No.2011066)
文摘Frequency-tunable microwave signal generation is proposed and experimentally demonstrated with a dual-wavelength single-longitudinal-mode （SLM） erbium-doped fiber ring laser based on a digital Opto-DMD processor and four-wave mixing （FWM） in a high-nonlinear photonic crystal fiber （PCF）. The high-nonlinear PCF is employed for the generation of the FWM to obtain stable and uniform dual-wavelength oscillation. Two different short passive sub-ring cavities in the main ring cavity serve as mode filters to make SLM lasing. The two lasing wavelengths are electronically selected by loading different gratings on the Opto-DMD processor controlled with a computer. The wavelength spacing can be smartly adjusted from 0.165 nm to 1.08 nm within a tuning accuracy of 0.055 nm. Two microwave signals at 17.23 GHz and 27.47 GHz are achieved. The stability of the microwave signal is discussed. The system has the ability to generate a 137.36-GHz photonic millimeter signal at room temperature.
文摘对于转速变化的旋转机械,常规的频谱分析方法不能反映其振动信号的真实状态;同时,在转速变化剧烈的情况下,传统阶次分析仪器采用的转速脉冲到达时刻测量方法精度不高。针对以上问题,采用基于定点DSP的计算阶次跟踪方法,通过TMS320C5402定时器的精确计时功能实现高精度转速脉冲到达时刻的测量,同时利用DSP的McBSP(Multi-channel Buffered Serial Port,多通道缓冲串行口)同步采集振动信号,实现混合信号的采集和处理,完成基于DSP的实时阶次跟踪,并通过变速箱启动的实例验证了算法的有效性。
