Separation of Biphenyl Nitrile Compounds by Microemulsion Electrokinetic Chromatography with Mixed Surfactants

A mixture of nine biphenyl nitrile compounds with high hydrophobicity and similar structures was successfully separated by microemulsion electrokinetic chromatography (MEEKC) within 30 min. The buffer system contained 100 mmol/L sodium dodecyl sulfate (SDS), 80 mmol/L sodium cholate (SC), 0.81% heptane, 7.5% n-butanol, 10% acetonitrile and 10 mmol/L borate. The addition of SC, organic modifiers, sample preparation and temperature all showed remarkable effect on the separation. Meanwhile, the MEEKC method was briefly compared with micellar electrokinetic chromatography (MEKC) method.

Sensitizing Effect of Mixed Surfactants on the Colouration of Scandium(Ⅲ)with Phenylfluorone or Its Derivatives

In the presence of mixed micelle of a cationic and a nonionic surfactants,the reaction of scandium(Ⅲ) with phenylfluorone or its derivatives results in a very sensitive colouration:furthermore this chromophoric system tolerates the existence of a considerable amount of masking agents,so that many interfering ions can be masked and its selectivity would be further improved.After studying the optimum conditions and main charac- ters of some similar systems,the system of Sc(Ⅲ)—Orthonitrophenyuorone—Cetyltrimethylammonium Bromide(CTMAB)—Triton X-200 is chosen for the spectrophotometric determination of microamount of scandium.The proposed method shows not only high sensitivity(with a molar absorptivity of 2.12×1~sL mol^(-1)·cm^(-1))and selectivity,but also high tolerance of chromophoric conditions.Beer's law is obeyed over a range of 0～6.0 μg Sc/25ml.If the dual-wavelength method is applied,a much higher molar absorptivity o|' 3.04×10~5L·mol^(-1)·cm^(-1)than those of other systems ever reported in the literatures can be attained:more- over.its linear range is extended to 0～8.0 μg Sc/25ml and its reproducibility is also improved.

Synergistic anionic/zwitterionic mixed surfactant system with high emulsification efficiency for enhanced oil recovery in low permeability reservoirs

Emulsification is one of the important mechanisms of surfactant flooding. To improve oil recovery for low permeability reservoirs, a highly efficient emulsification oil flooding system consisting of anionic surfactant sodium alkyl glucosyl hydroxypropyl sulfonate(APGSHS) and zwitterionic surfactant octadecyl betaine(BS-18) is proposed. The performance of APGSHS/BS-18 mixed surfactant system was evaluated in terms of interfacial tension, emulsification capability, emulsion size and distribution, wettability alteration, temperature-resistance and salt-resistance. The emulsification speed was used to evaluate the emulsification ability of surfactant systems, and the results show that mixed surfactant systems can completely emulsify the crude oil into emulsions droplets even under low energy conditions. Meanwhile,the system exhibits good temperature and salt resistance. Finally, the best oil recovery of 25.45% is achieved for low permeability core by the mixed surfactant system with a total concentration of 0.3 wt%while the molar ratio of APGSHS:BS-18 is 4:6. The current study indicates that the anionic/zwitterionic mixed surfactant system can improve the oil flooding efficiency and is potential candidate for application in low permeability reservoirs.

Synthesis of nanoiron by microemulsion with Span/Tween as mixed surfactants for reduction of nitrate in water

Denitrification of nitrate in groundwater using iron nanoparticles has received increasing interest in recent years.In order to fabricate iron nanoparticles with homoge-neously spherical shape and narrow size distribution,a simple and“green”method was developed to synthesize iron nano-particles.The conventional microemulsion methods were modified by applying Span 80 and Tween 60 as mixed sur-factants.The maximum content of water in the Water-in-oil(W/O)microemulsion and its appropriate forming conditions were found,and then the microemulsion system consisting of saturated Fe^(2+)solution was used to synthesizeα-Fe ultrafine particles by redox reaction.The nanoparticles were characterized by using powder X-ray diffraction(XRD)and transmission electron microscopy(TEM).The results show that the average diameter of the particle is about 80-90 nm.The chemical activity of the obtained iron nanoparticles was studied by the denitrification experiment of nitrate.The results show that under the experimental conditions,iron removed most of the 80 mg/L nitrate within 30 min.The mass balance of nitrate reduction with nanoscale Fe indicates that endproducts are mainly ammonia.Two possible reaction pathways for nitrate reduction by nanoscale iron particles have been proposed in this work.

Removal of Ni（ll） ions from wastewater by micellar enhanced ultrafiltration using mixed surfactants

Ni（II） ions were removed from aqueous waste using micellar enhanced ultrafiltration （MEUF） with a mixture of surfactants. The surfactant mixture was the nonionic surfactant Tween 80 （TW80） mixed with the anionic surfactant sodium dodecyl sulfate （SDS） in different molar ratios ranging from 0.1-1.5. The opera- tional variables of the MEUF process such as pH, applied pressure, surfactant to metal ion ratio and nonionic to ionic surfactant molar ratio （α） were evaluated. Rejection of Ni and TW80 was 99% and 98% respectively whereas that for SDS was 65%. The flux and all resistances （fouling resistance, resistance due to concentration polarization） were measured and calculated for entire range of α respectively. A calculated flux was found to be declined with time, which was mainly attributed to concentration polarization rather than resistance from membrane fouling.

Interaction of nonionic surfactant AEO_9 with ionic surfactants

The interaction in two mixtures of a nonionic surfactant AEO9 (C12H25O(CH2CH2O)9H) and different ionic surfactants was investigated. The two mixtures were AEO9/sodium dodecyl sulfate (SDS) and AEO9/cetyltrimethylammonium bromide (CTAB) at molar fraction of AEO9, A EO9 α =0.5. The surface properties of the surfactants, critical micelle concentration (CMC), effectiveness of surface tension reduction (γCMC), maximum surface excess concentration (Γmax) and minimum area per molecule at the air/solution interface (Amin) were determined for both individual surfactants and their mixtures. The significant deviations from ideal behavior (attractive interactions) of the nonionic/ionic surfactant mixtures were determined. Mixtures of both AEO9/SDS and AEO9/CTAB exhibited synergism in surface tension reduction efficiency and mixed micelle formation, but neither exhibited synergism in surface tension reduction effectiveness.

Temperature-resistant and salt-tolerant mixed surfactant system for EOR in the Tahe Oilfield

A new temperature-resistant and salt-tolerant mixed surfactant system(referred to as the SS system)for enhancing oil recovery at the Tahe Oilfield(Xinjiang,China)was evaluated.Based on the analysis of the crude oil,the formation water and rock components in the Tahe Oilfield,the long-term thermal stability,salt tolerance and the ability to change the wettability,interfacial activity and oil washing efficiency of the mixed surfactant system were studied.The system contains the anionic surfactant SDB and another cationic surfactant SDY.When the total mass concentration of the SS solution is 0.15 wt%,m(SDB)/m(SDY)ratio is 1 to 1,and excellent efficiencies are achieved for oil washing for five kinds of Tahe Oilfield crude oils(more than 60%).In addition,after adding cationic surfactant,the adsorption capacity of the surfactant is further reduced,reaching 0.261 mg/g.The oil displacement experiments indicate that under a temperature of 150°C and a salinity of 24.6×104 mg/L,the SS system enhances the oil recovery by over 10%after water flooding.The SS anionic–cationic surfactant system is first presented in the open literature that can be successfully applied to obtain predictions of Tahe Oilfield carbonate reservoirs with a high temperature and high salinity.

Interaction of antipsychotic drug with novel surfactants: Micellization and binding studies

The interaction of cationic gemini surfactants(alkanediyl-α,ω-bis(alkyl dimethylammonium bromide)) with an antipsychotic drug(chlorpromazine hydrochloride(CPZ)) has been investigated. Various micellar and interfacial parameters have been deliberated by surface tension measurement to report the nature of interactions between drug and novel surfactant mixtures. The behavior of mixed systems, their compositions and activities of components have been analyzed in the light of Rubingh's theory. The results indicate synergism in the binary mixtures.The binding study between CPZ and surfactants has been done by spectroscopic techniques such as UV–visible and fluorescence. The results are discussed in the light of the use of gemini surfactants as promising drug delivery agents for phenothiazine drugs, and hence, improve their bioavailability.

Effect of Pore Size on Properties of Highly Porous Silica Ceramic Foams for Heat Insulation

Highly porous silica ceramics with different pore sizes were fabricated by adjusting the mixed surfactants addition.The effect of the pore size on the cold compressive strength and the thermal conductivity of the ceramics was researched.The results show that the smaller pore size can improve the compressive strength and the thermal conductivity.With the mixed surfactants addition increasing from 0.1 mass%to 0.4 mass%,the porosity is close,in the range of 88.10%-88.31%,and the average pore size decreases from 190μm to 97μm;the compressive strength is enhanced from 2.97 MPa to 3.55 MPa;and the thermal conductivity decreases from 0.104 W·m-1·K-1 to 0.089 W·m-1·K-1.

Injection of biosurfactant and chemical surfactant following hot water injection to enhance heavy oil recovery

This study investigates the potential of enhancing oil recovery from a Middle East heavy oil field via hot water injection followed by injection of a chemical surfactant and/or a biosurfactant produced by a Bacillus subtilis strain which was isolated from oil-contaminated soil.The results reveal that the biosurfactant and the chemical surfactant reduced the residual oil saturation after a hot water flood.Moreover,it was found that the performance of the biosurfactant increased by mixing it with the chemical surfactant.It is expected that the structure of the biosurfactant used in this study was changed when mixed with the chemical surfactant as a probable synergetic effect of biosurfactant-chemical surfactants was observed on enhancing oil recovery,when used as a mixture,rather than alone.This work proved that it is more feasible to inject the biosurfactant as a blend with the chemical surfactant,at the tertiary recovery stage.This might be attributed to the fact that in the secondary mode,improvement of the macroscopic sweep efficiency is important,whereas in the tertiary recovery mode,the microscopic sweep efficiency matters mainly and it is improved by the biosurfactantchemical surfactant mixture.Also as evidenced by this study,the biosurfactant worked better than the chemical surfactant in reducing the residual heavy oil saturation after a hot water flood.

Formation of Uniform Oil-Soluble Fe_3O_4 Nanoparticles via Oil-Water Interface System

Nowadays,the novel oil water interface method has attracted a considerable attention owing to the advantages of mild reaction conditions,simple operation,low cost,and high efficiency.In this paper,uniform oil-soluble Fe_3O_4 nanoparticles(NPs) were synthesized by oil-water interface method from mixing iron tristearate of 0.067mol/L in cyclohexane with ferrous sulfate in water.The as-prepared products were characterized by X-ray diffraction(XRD),transmission electron microscopy(TEM),vibrating sample magnetometer(VSM),Fourier transform infrared spectroscopy(FT-IR) and thermogravimetric analyzer(TGA).TEM images and XRD profiles showed that the size of the oil-soluble products ranged in 1.7-6.9 nm.VSM indicated that the Fe_3O_4 NPs were superparamagetic.FT-IR and TGA proved that oleic acid was combined to the surface of Fe_3O_4 NPs closely.TEM images and XRD profiles revealed that the most suitable reaction concentration of NH_3·H_2O,oleic acid/water in volume,reaction temperature and reaction time were 4.5 mol/L,50:1 000,80℃ and 6 h,respectively.The formation mechanism of the nearly monodispersed Fe_3O_4 NPs was that the preformed Fe_3O_4 nuclei were capped by oleic acid as early as the nucleation occurred in oil-water interface and subsequently entered into oil phase to stop growing.

Realization approach of Pd-only three-way catalysts with high catalytic performance and thermal stability

Pd-only three-way catalyst （TWC）, Pd supported on washcoating （the mixture of alumina and Ce-Zr solid solution）/cordierite, was prepared and its catalytic performance and the operation window （2-value） at 450 ℃ were evaluated with the simulated automotive exhaust feed gas. Surfactants such as Tween-80 and Span-20 were added in the process of preparing the catalyst in order to improve the thermal stability and catalytic performance of Pd-only TWC. The fresh and aged catalysts at 1000 ℃ for 4 h were characterized by low-temperature N2 adsorption, XRD, XPS, and H2-TPR techniques. The results show that the presence of surfactants in the synthesis slurry could influence the physicochemical properties of the final Pd-only TWC. The FTS catalyst prepared with the mixed surfactant of Tween-80 and Span-20 exhibited excellent three-way catalytic performance. After being aged at 1000℃ for 4 h, the catalytic performances of Pd-only TWCs slightly decreased, but the FTS catalyst still demonstrated higher catalytic performance and better thermal stability compared with the Pd-only catalysts prepared with single surfactant or without any surfactant. And the FTS catalyst has a wider 2 value （operation window） than other catalysts, even after being aged at 1000℃.