Experimental Investigation on Mixing Enhancement Mechanism of Turbulent Jet Flow with Tabbed Nozzle

Flow visualization and hot-wire measurement techniques were combined to investigate the influence of the size and number of tabs on jet flow field and vortex structure generation mechanism. Streamwise vortices generated by the tabs of different sizes and numbers were observed from the flow visualization images. Combined with flow visualization, hot-wire measurement gave a quantitative insight of the effect of various tabbed jet flows. Instantaneous two-component velocity signals (longitudinal and transverse velocity components) at different cross sections along radius direction and streamwise direction with different tabbed jet nozzles were measured using hot-wire anemometer. Average flow field parameters of tabbed jet flow such as mean velocity, tur-bulence intensity, vorticity were analyzed and the effects of tabs with different sizes and numbers were compared with that of circular no-tab jet flow. It is revealed that the generation of a series of counter-rotating quasi-streamwise vortices, azimuthal vortices and double-row azi-muthal vortex are the reasons for mixing enhancement of tabbed turbulent jet flow.

Direct numerical simulation of elastic turbulence and its mixing-enhancement effect in a straight channel flow

In this paper,we present a direct numerical simulation（DNS） of elastic turbulence of viscoelastic fluid at vanishingly low Reynolds number（Re = 1） in a three-dimensional straight channel flow for the first time,using the Giesekus constitutive model for the fluid.In order to generate and maintain the turbulent fluid motion in the straight channel,a sinusoidal force term is added to the momentum equation,and then the elastic turbulence is numerically realized with an initialized chaotic velocity field and a stretched conformation field.Statistical and structural characteristics of the elastic turbulence therein are analyzed based on the detailed information obtained from the DNS.The fluid mixing enhancement effect of elastic turbulence is also demonstrated for the potential applications of this phenomenon.

Study on the thermo-hydraulic behaviors of the new-pattern fuel assembly in lead-based fast reactors based on OpenFOAM

To improve the heat transfer efficiency of the coolant in lead-based fast reactors,this study optimized the configuration and rotational direction of the spacer wires in fuel assemblies to design a new-pattern fuel assembly.This study conducted detailed comparisons between traditional and new pattern fuel assembly rod bundles utilizing the open-source computational fluid dynamics platform,OpenFOAM.The results indicated that the new design may significantly reduce the pressure drop along the rod bundle,which is beneficial for lowering the pressure drop.Furthermore,this new design improved coolant mixing in the subchannels,which facilitated a more uniform temperature distribution and lower thermal gradients at the assembly outlet.These factors collectively reduced the thermal fatigue and creep in nearby internal components.Overall,the newpattern fuel assembly proposed in this study may have better heat transfer performance,thereby enhancing the Integrated Thermal-Hydraulic Factor by 48.2% compared to the traditional pattern.

Revisiting Effect of Ocean Diapycnal Mixing on Atlantic Meridional Overturning Circulation Recovery in a Freshwater Perturbation Simulation

The effects of ocean density vertical stratification and related ocean mixing on the transient response of the Atlantic meridional overturning circulation （AMOC） are examined in a freshwater perturbation simulation using the Bergen Climate Model （BCM）. The results presented here are based on the model outputs of a previous freshwater experiment： a 300-year control integration （CTRL）, a freshwater integration （FW1） which started after 100 years of running the CTRL with an artificially and continuously threefold increase in the freshwater flux to the Greenland-Iceland-Norwegian （GIN） Seas and the Arctic Ocean throughout the following 150-year simulation. In FW1, the transient response of the AMOC exhibits an initial decreasing of about 6 Sv （1 Sv=106 m3 s^-1） over the first 50-year integration and followed a gradual recovery during the last 100-year integration. Our results show that the vertical density stratification as the crucial property of the interior ocean plays an important role for the transient responses of AMOC by regulating the convective and diapycnal mixings under the enhanced freshwater input to northern high latitudes in BCM in which the ocean diapycnal mixing is stratification-dependent. The possible mechanism is also investigated in this paper.

Continuous, homogeneous and rapid synthesis of 4-bromo-3-methylanisole in a modular microreaction system

4-Bromo-3-methylanisole is mainly used to synthesize black fluorane dye(2-anilino-3-methyl-6-dibutylaminofluorane, ODB-2), which is one of the most important heat and pressure-sensitive dyes in the manufacture of thermal papers. Compared to the industrial heterogeneous batch process, a continuous homogeneous bromination technology in a modular microreaction system has been developed, and 4-bromo-3-methylanisole has been successfully prepared through high-selective mono-bromination of 3-methylanisole with Br2 solution in CHCl3. In optimal conditions, the content of bis-brominated byproducts can be controlled less than 0.5%,which is superior to the industrial standard with 99.5% 3-methylanisole conversion at very short residence time and mild reaction temperature.

Injection of biosurfactant and chemical surfactant following hot water injection to enhance heavy oil recovery

This study investigates the potential of enhancing oil recovery from a Middle East heavy oil field via hot water injection followed by injection of a chemical surfactant and/or a biosurfactant produced by a Bacillus subtilis strain which was isolated from oil-contaminated soil.The results reveal that the biosurfactant and the chemical surfactant reduced the residual oil saturation after a hot water flood.Moreover,it was found that the performance of the biosurfactant increased by mixing it with the chemical surfactant.It is expected that the structure of the biosurfactant used in this study was changed when mixed with the chemical surfactant as a probable synergetic effect of biosurfactant-chemical surfactants was observed on enhancing oil recovery,when used as a mixture,rather than alone.This work proved that it is more feasible to inject the biosurfactant as a blend with the chemical surfactant,at the tertiary recovery stage.This might be attributed to the fact that in the secondary mode,improvement of the macroscopic sweep efficiency is important,whereas in the tertiary recovery mode,the microscopic sweep efficiency matters mainly and it is improved by the biosurfactantchemical surfactant mixture.Also as evidenced by this study,the biosurfactant worked better than the chemical surfactant in reducing the residual heavy oil saturation after a hot water flood.

Enhancement of phase conjugation degenerate four-wave mixing using a Bessel beam

We report on the enhancement of phase conjugation degenerate four-wave mixing(DFWM) in hot atomic Rb vapor by using a Bessel beam as the probe beam. The Bessel beam was generated using cross-phase modulation based on the thermal nonlinear optical effect. Our results demonstrated that the DFWM signal generated by the Bessel beam is about twice as large as that generated by the Gaussian beam, which can be attributed to the extended depth and tight focusing features of the Bessel beam. We also found that a DFWM signal with reasonable intensity can be detected even when the Bessel beam encounters an obstruction on its way, thanks to the selfhealing property of the Bessel beam. This work not only indicates that DFWM using a Bessel beam would be of great potential in the fields of high-fidelity communication, adaptive optics, and so on, but also suggests that a Bessel beam would be of significance to enhance the nonlinear process, especially in thick and scattering media.

Numerical Simulation of High-Power Synthetic Jet Actuator Flowfield and its Influence on Mixing Control

Detailed two-dimensional unsteady numerical simulation is carried out to investigate a high-power synthetic jet actuator flow field and its design characteristic. Simultaneously, mixing control mechanism of coaxial jets with actuators is also studied. Firstly, excitation frequency （rotating speed）, piston displacement and its exit slot width have effect on the controlling ability and controlling efficiency of actuator. With the invariable model and con- cerned parameters, the actuator becomes more desirable as the rotating speed increases. Average velocity and maximal velocity at the actuator exit section increase as the piston displacement enlarges or the exit slot width decreases. But the actuator does not always exhibit good performance with the narrower exit. Secondly, the synthetic jets also have the ＂push＂ effect on the coaxial jets, which results in the fluctuation of vorticity and temperature distribution of mixing flowfield. Finally, the employment of synthetic jet actuator can achieve mixing enhancement significantly.

Characteristics and Mechanisms of the Sudden Warming Events in the Nocturnal Atmospheric Boundary Layer:A Case Study Using WRF

Although sudden nocturnal warming events near the earth＇s surface in Australia and the United States have been examined in previous studies, similar events observed occasionally over the Loess Plateau of Northwest China have not yet been investigated. The factors that lead to these warming events in such areas with their unique topography and climate remain not clear. To understand the formation mechanisms and associated thermal and dynamical features, a nocturnal warming event recorded in Gansu Province （northwest of the Loess Plateau） in June 2007 was investigated by using observations and model simulations with the Weather Research and Forecasting （WRF） model. Observations showed that this near-surface warming event lasted for 4 h and the temperature increased by 2.5℃. During this event, a decrease in humidity occurred simultaneously with the increase of temperature. The model simulation showed that the nocturnal warming was caused mainly by the transport of warmer and drier air aloft downward to the surface through enhanced vertical mixing. Wind shear played an important role in inducing the elevated vertical mixing, and it was enhanced by the continuous development of the atmospheric baroclinicity, which converted more potential energy to kinetic energy.