Thermal stability,crystallization behavior,Vickers hardness and magnetic properties of the Fe41Co7-xNixCr15Mo14C15B6Y2（x=0,1,3,5） bulk metallic glasses were investigated.The Fe41Co7-xNixCr15Mo14C15B6Y2（x=0,1,3,5） ...Thermal stability,crystallization behavior,Vickers hardness and magnetic properties of the Fe41Co7-xNixCr15Mo14C15B6Y2（x=0,1,3,5） bulk metallic glasses were investigated.The Fe41Co7-xNixCr15Mo14C15B6Y2（x=0,1,3,5） metallic glasses were fabricated by copper mold casting method.The thermal stability and crystallization behavior of the metallic glass rods were investigated by differential scanning calorimetry and isothermal experiments.Hardness measurements for samples annealed at different temperatures for different time were carried out at room temperature by the Vickers hardness tester,and magnetic measurements were performed at different temperatures by the vibrating sample magnetometer.It is shown that the addition of Ni does not play a positive role for enlarging ΔTx and GFA from parameter γ（=Tx/（Tg＋Tl））,and it can,however,increase the activation energy in the initial stage of crystallization by changing the initial crystallization behavior.The minor addition of Ni can refine the crystal grain obtained from the full crystallization experiment.The primary crystallization causes the decrease of hardness in these alloys,and as the crystallization continues,the hardness in all samples increases instead due to the precipitation of carbide and boride.The annealing temperature has an obvious effect on magnetic properties of these alloys,and the minor addition of Ni can effectively prevent the alloy annealed at high temperature to transform from paramagnetic to ferromagnetic state.展开更多
目的建立微波消解-电感耦合等离子体质谱（ICP-MS）直接稀释测定脉络宁注射液中25种矿物质元素（Mg、Ca、Fe、Cu、Zn、Mn、Al、B、Ba、Co、Cr、K、Li、Mo、Na、Ni、P、Pb、Sr、Th、Ti、V、As、Cd和Hg）的方法。方法分别对微波消解条件...目的建立微波消解-电感耦合等离子体质谱（ICP-MS）直接稀释测定脉络宁注射液中25种矿物质元素（Mg、Ca、Fe、Cu、Zn、Mn、Al、B、Ba、Co、Cr、K、Li、Mo、Na、Ni、P、Pb、Sr、Th、Ti、V、As、Cd和Hg）的方法。方法分别对微波消解条件和测试条件进行考察;样品经微波消解后,采用电感耦合质谱仪测定25种矿物质元素,并对测定方法学进行考察。结果确定最佳消解条件为3步缓慢升温：400 W 80℃升温10 min,保留5 min;600 W 120℃升温10 min,保留5 min;900 W 200℃升温20 min,保留20 min;25种矿物质元素在各自的线性范围内线性关系良好,r≥0.999 6,精密度、稳定性和重复性试验的RSD均符合定量分析要求;加标回收率为94.7%~106.1%,RSD在0.34%~2.79%。脉络宁注射液中检测出Mg、Ca、Fe、Cu、Zn、Mn、Al、B、Ba、Co、Cr、K、Li、Mo、Na、Ni、P、Pb、Sr、Th、Ti、V,未检出As、Cd和Hg。结论该方法简便、迅速、准确,适用于脉络宁注射液中25种矿物质元素的同时测定。展开更多
基金Project(2012CB825700) supported by the National Basic Research Program of China
文摘Thermal stability,crystallization behavior,Vickers hardness and magnetic properties of the Fe41Co7-xNixCr15Mo14C15B6Y2（x=0,1,3,5） bulk metallic glasses were investigated.The Fe41Co7-xNixCr15Mo14C15B6Y2（x=0,1,3,5） metallic glasses were fabricated by copper mold casting method.The thermal stability and crystallization behavior of the metallic glass rods were investigated by differential scanning calorimetry and isothermal experiments.Hardness measurements for samples annealed at different temperatures for different time were carried out at room temperature by the Vickers hardness tester,and magnetic measurements were performed at different temperatures by the vibrating sample magnetometer.It is shown that the addition of Ni does not play a positive role for enlarging ΔTx and GFA from parameter γ（=Tx/（Tg＋Tl））,and it can,however,increase the activation energy in the initial stage of crystallization by changing the initial crystallization behavior.The minor addition of Ni can refine the crystal grain obtained from the full crystallization experiment.The primary crystallization causes the decrease of hardness in these alloys,and as the crystallization continues,the hardness in all samples increases instead due to the precipitation of carbide and boride.The annealing temperature has an obvious effect on magnetic properties of these alloys,and the minor addition of Ni can effectively prevent the alloy annealed at high temperature to transform from paramagnetic to ferromagnetic state.
文摘目的建立微波消解-电感耦合等离子体质谱（ICP-MS）直接稀释测定脉络宁注射液中25种矿物质元素（Mg、Ca、Fe、Cu、Zn、Mn、Al、B、Ba、Co、Cr、K、Li、Mo、Na、Ni、P、Pb、Sr、Th、Ti、V、As、Cd和Hg）的方法。方法分别对微波消解条件和测试条件进行考察;样品经微波消解后,采用电感耦合质谱仪测定25种矿物质元素,并对测定方法学进行考察。结果确定最佳消解条件为3步缓慢升温：400 W 80℃升温10 min,保留5 min;600 W 120℃升温10 min,保留5 min;900 W 200℃升温20 min,保留20 min;25种矿物质元素在各自的线性范围内线性关系良好,r≥0.999 6,精密度、稳定性和重复性试验的RSD均符合定量分析要求;加标回收率为94.7%~106.1%,RSD在0.34%~2.79%。脉络宁注射液中检测出Mg、Ca、Fe、Cu、Zn、Mn、Al、B、Ba、Co、Cr、K、Li、Mo、Na、Ni、P、Pb、Sr、Th、Ti、V,未检出As、Cd和Hg。结论该方法简便、迅速、准确,适用于脉络宁注射液中25种矿物质元素的同时测定。
