Electrochemical and colorimetric dual-signal detection of Staphylococcus aureus enterotoxin B based on AuPt bimetallic nanoparticles loaded Fe-N-C single atom nanocomposite

Sensitive detection of Staphylococcus aureus enterotoxin B(SEB)is of importance for preventing food poisoning from threatening human health.In this work,an electrochemical and colorimetric dual-signal detection assay of SEB was developed.The probe(Ab2/AuPt@Fe-N-C)was bound to SEB captured by Ab1,where the Ab2/AuPt@Fe-N-C triggered methylene blue degradation and resulted in the decrease of electrochemical signal.Furthermore,the probe catalyzed the oxidation of 3,3’,5,5’-tetramethyl biphenyl to generate a colorimetric absorbance at 652 nm.Once the target was captured and formed a sandwich-like complex,the color changed from colorless to blue.SEB detection by colorimetric and electrochemical methods showed a linear relationship in the concentration ranges of 0.0002-10.0000 and 0.0005-10.0000 ng/mL,with limits of detection of 0.0667 and 0.1670 pg/mL,respectively.The dual-signal biosensor was successfully used to detect SEB in milk and water samples,which has great potential in toxin detection in food and the environment.

Plasma treated M1 MoVNbTeO_(x)-CeO_(2) composite catalyst for improved performance of oxidative dehydrogenation of ethane

High activity and productivity of MoVNbTeO_(x) catalyst are challenging tasks in oxidative dehydrogenation of ethane(ODHE)for industrial application.In this work,phase-pure M1 with 30 wt%CeO_(2) composite catalyst was treated by oxygen plasma to further enhance catalyst performance.The results show that the oxygen vacancies generated by the solid-state redox reaction between M1 and CeO_(2) capture active oxygen species in gas and transform V^(4+)to V^(5+)without damage to M1 structure.The space-time yield of ethylene of the plasma-treated catalyst was significantly increased,in which the catalyst shows an enhancement near~100% than that of phase-pure M1 at 400℃ for ODHE process.Plasma treatment for catalysts demonstrates an effective way to convert electrical energy into chemical energy in catalyst materials.Energy conversion is achieved by using the catalyst as a medium.

Photocatalytic Degradation of Phenol over MWCNTs-TiO2 Composite Catalysts with Different Diameters

Titania-based composite catalysts were prepared through a sol-gel route employing multi-walled carbon nanotubes with different diameters. The materials were characterized using thermogravimetric analysis, nitrogen adsorption-desorption isotherm, powder X-ray diffraction, scanning electron microscopy, and diffuse reflectance UV-Vis absorption spectra. The application of the catalysts to photocatalytic degradation of phenol was tested under UV-Vis irradiation. A synergetic effect on phenol removal was observed in case of composite catalysts, which was evaluated in terms of apparent rate constant, total organic carbon removal and photonic efficiency.

Synthesis and Photocatalytic Activity of TiO_2/V_2O_5 Composite Catalyst Doped with Rare Earth Ions

TiO2/V2O5 catalyst doped with rare earth ions was prepared by sol-gel method. Titanium tetrapropoxide and vanadium pentoxide were used as precursor of the composite catalyst and rare earth ions were used as dopant. The crystal phases, crystalline sizes, microstructure, absorption spectra of doped composite catalyst were studied by XRD, EDS, FT-IR and UV-Vis. Photoactivity of the prepared catalyst under ultraviolet irradiation were evaluated by degradation of methyl orange （MO） in aqueous solution. It is shown that the prepared catalyst is composed of anatase and futile. The rare earth ions are highly dispersed in composite catalyst. All the doped catalysts appear higher photocatalytic activity than TiO2/V2O5 catalyst and catalyst doped with Ce^4＋ present the best activity to MO.

ZSM-5/MAPO Composite Catalyst for Converting Methanol to Olefins in a Two-Stage Unit with a Dimethyl Ether Pre-Reactor

A ZSM-5/MAPO composite catalyst was prepared by adding ZSM-5 zeolite powder to a conventional molecular sieve synthesis system, followed by modification with NH_4H_2PO_4. The samples were characterized by XRD, SEM, IR, NH_3-TPD, and BET analyses. The catalytic property of the samples toward the methanol-to-olefin(MTO) reaction was evaluated in a connected in series two-stage unit equipped with a continuous flow(once-through) fixed-bed tubular reactor similar to an industrial reactor. The first reactor mainly converted methanol into dimethyl ether and water, followed by being subject to continuous reaction in the second reactor, in which DME was converted to hydrocarbons. The composites exhibited the typical framework topology of MFI, AEI and AFI, which represented the ZSM-5 zeolite, the molecular sieves AlPO-18 or SAPO-18, AlPO-5 or SAPO-5, respectively. The composites showed several advantages for optimizing the zeolite acidity, enhancing the mass transfer, and restraining the side reactions. Catalytic reaction results showed that the composites exhibited higher selectivity to light olefins(84.0%) and lower selectivity to C_2―C_4 alkanes and C_5^+ hydrocarbons than pure ZSM-5. Moreover, the composite zeolite loaded with 3% of P demonstrated improved catalytic activity and stability for the conversion of methanol to propylene, because the coking rate was obviously suppressed.

Preparation of CuO-CoO-MnO/SiO_2 Nanocomposite Aerogels as Catalyst Carriers and Their Application in the Synthesis of Diphenyl Carbonate

CuO-CoO-MnO/SiO2 nanocomposite aerogels were prepared by using tetraethyl orthosilicate （TEOS） as Si source, and aqueous solution of Cu, Co and Mn acetates as transition metal sources via sol-gel process and supercritical drying （SCD） technique. The effect of synthesis conditions on gelation was investigated. Moreover, the composition of the CuO-CoO-MnO/SiO2 nanocomposite aerogels was characterized by electron dispersive spectroscopy （EDS） and X-ray photoelectron spectroscopy （XPS）, and the specific surface area of the nanocomposite aerogels was determined by the Brunauer-Emmett-Teller （BET） method. Diphenyl carbonate （DPC） as the product was analyzed by gas chromatography （GC）. The experimental results show that the range of optimal temperature for gelation is 30-45 ℃, and the pH is 3.0-4.5. CuO-CoO-MnO/SiO2 nanocomposite aerogels are porous with a specific surface area of 384.9-700.6 m2/g. Compared to CO2 SCD, ethanol SCD is even favorable to the formation of aerogel with high specific surface area. The transition metals content in the nanocomposite aerogels can be controlled to be 0.71at%-13.77at%. With CuO-CoO-MnO/SiO2 nanocomposite aerogels as catalyst carrier, the yield of DPC is in direct proportion to the atomic fraction of transition metals in the nanocomposite aerogels, and it is up to 26.31 mass%, which is much higher than that via other porous carriers.

Carbon nanotubes-Nafion composites as Pt-Ru catalyst support for methanol electro-oxidation in acid media

Carbon nanotubes-Nafion （CNTs-Nation） composites were prepared by impregnated CNTs with Nation in ethanol solution and characterized by FT-IR. Pt-Ru catalysts supported on CNTs-Nafion composites were synthesized by microwave-assisted polyol process. The physical and electrochemical properties of the catalysts were characterized by X-ray diffraction （XRD）, transmission electron microscope （TEM）, CO stripping voltammetry, cyclic voltammetry （CV） and chronoamperometry （CA）. The results showed that the Nation incorporation in CNTs-Nation composites did not significantly alter the oxygen-containing groups on the CNTs surface. The Pt-Ru catalyst supported on CNTs-Nafion composites with 2 wt% Naton showed good dispersion and the best CO oxidation and methanol electro-oxidation activities.

Composition Engineering Opens an Avenue Toward Efficient and Sustainable Nitrogen Fixation

In this work,we open an avenue toward rational design of potential efficient catalysts for sustainable ammonia synthesis through composition engineering strategy by exploiting the synergistic effects among the active sites as exemplified by diatomic metals anchored graphdiyne via the combination of hierarchical high-throughput screening,first-principles calculations,and molecular dynamics simulations.Totally 43 highly efficient catalysts feature ultralow onset potentials(|U_(onset)|≤0.40 V)with Rh-Hf and Rh-Ta showing negligible onset potentials of 0 and-0.04 V,respectively.Extremely high catalytic activities of Rh-Hf and Rh-Ta can be ascribed to the synergistic effects.When forming heteronuclears,the combinations of relatively weak(such as Rh)and relatively strong(such as Hf or Ta)components usually lead to the optimal strengths of adsorption Gibbs free energies of reaction intermediates.The origin can be ascribed to the mediate d-band centers of Rh-Hf and Rh-Ta,which lead to the optimal adsorption strengths of intermediates,thereby bringing the high catalytic activities.Our work provides a new and general strategy toward the architecture of highly efficient catalysts not only for electrocatalytic nitrogen reduction reaction(eNRR)but also for other important reactions.We expect that our work will boost both experimental and theoretical efforts in this direction.

Effects of Dispersed Mo-Fe Catalysts on Catalytic Hydrothermal Conversion of Residue

Replacement of precious single metal catalysts with cost-effective,highly-dispersed composite catalysts for catalytic hydrothermal conversion of residue holds tremendous promise for the residue upgrading technologies.Organic metals were added to the feed as the oil-soluble precursors,and were transformed into the catalytic active phases in this work.Physical properties and structures of the composite catalysts had been investigated by X-ray fluorescence spectroscopy,X-ray photoelectron spectroscopy,X-ray diffraction,scanning electron microscopy and transmission electron microscopy.The composite catalysts were found to be highly efficient in the catalytic hydrothermal conversion of both the model compound and the residue.Increased metal dispersion and synergistic effects of two metals played indispensable roles in such catalytic system.Results showed that under the test conditions specified in the article,the catalyst had the best catalytic performance when the mass ratio of molybdenum to iron was 1.5.

Optimization of dendritic TS-1/Silica micro–mesoporous composites for efficient hydrodesulfurization of dibenzothiophene and 4,6-dimethyldibenzothiophene

A novel composite material(TD)composed of TS-1 microcrystalline and dendritic mesoporous silica nanospheres(DMSNs)was successfully prepared.The TD composite material had open pore structure and large specific surface area,which was conducive to the mass transfer of reactants and products.The Ti element in TS-1 could be used as an electron assistant,and the spillover d-electrons were conducive to the improvement of the sulfidation and dispersion of MoS_(2),thereby forming more type II MoS_(2) active phases.The incorporation of Ti could bring more Brønsted(B)and Lewis(L)acid,which was conducive to the hydrogenation pathway(HYD)selectivity(41.2%)of dibenzothiophene(DBT)hydrodesulfurization(HDS)and isomerization(ISO)route selectivity(21.9%)of 4,6-dimethyldibenzothiophene(4,6-DMDBT)HDS,thus improve the HDS activity of DBT and 4,6-DMDBT.NiMo/TD-70(Aging temperature=70℃)had the best HDS activities of DBT(99.0%)and 4,6-DMDBT(93.7%)due to its large open pore structure,good acidity,suitable metal-support interaction(MSI)and perfect dispersion of the metallic active sites.

The carboxylates formed on oxides promoting the aromatization in syngas conversion over composite catalysts

Syngas to aromatics(STA)over bifunctional catalysts has attracted much attention in recent years,but the mechanism underlying the formation of aromatics remains controversial.The critical reaction intermediates,carboxylates,were first identified and then confirmed to essentially promote aromatization in the syngas conversion over a ZnCrAlO_(x)&H-ZSM-5 composite catalyst.This study provides evidence that the carboxylates can be formed during the reactions of formate species and olefins.In addition,it is shown that the carboxylates favor the formation of aromatics over H-ZSM-5 even in the presence of H2.A novel mechanism for the formation of aromatics via the generation and transformation of carboxylate intermediates is proposed,and the transformation of carboxylates to aromatics via methyl-2-cyclopenten-1-one(MCPO)intermediates is indeed likely.A better understanding of the formation mechanism of aromatics would help optimize the composite catalyst.

Insights into effects of ZrO_(2) crystal phase on syngas‐to‐olefin conversion over ZnO/ZrO_(2) and SAPO‐34 composite catalysts

The utilization of metal oxide‐zeolite catalysts in the syngas‐to‐olefin reaction is a promising strategy for producing C_(2)–C_(4) olefins from non‐petroleum resources.However,the effect of the crystal phase of metal oxides on the catalytic activity of these oxides is still ambiguous.Herein,typical metal oxides(ZnO/ZrO_(2))with different crystal phases(monoclinic(m‐ZrO_(2))and tetragonal(t‐ZrO_(2)))were employed for syngas conversion.The(ZnO/m‐ZrO_(2)+SAPO‐34)composite catalyst exhibited 80.5%selectivity for C_(2)–C_(4) olefins at a CO conversion of 27.9%,where the results are superior to those(CO conversion of 16.4%and C_(2)–C_(4) olefin selectivity of 76.1%)obtained over(ZnO/t‐ZrO_(2)+SAPO‐34).The distinct differences are ascribed to the larger number of hydroxyl groups,Lewis acid sites,and oxygen defects in ZnO/m‐ZrO_(2) compared to ZnO/t‐ZrO_(2).These features result in the formation of more formate and methoxy intermediate species on the ZnO/m‐ZrO_(2) oxides during syngas conversion,followed by the formation of more light olefins over SAPO‐34.The present findings provide useful information for the design of highly efficient ZrO_(2)‐based catalysts for syngas conversion.

Synthesis and Application of a Zeolite-containing Composite Material Made from Spent FCC Catalyst

Novel composite material with a wide pore distribution was synthesized by an in situ technique using spent FCC catalyst as raw material. The characterization results indicated that the composite material contained 56.7% of zeolite Y and exhibited a much larger specific surface area and pore volume as well as strong hydrothermal stability. Fluid catalytic cracking(FCC) catalyst was prepared based on the composite material. The results indicated that the as-prepared catalyst possessed a unique pore structure that was advantageous to the diffusion-controlled reactions. In addition, the attrition resistance, activity and hydrothermal stability of the studied catalyst were superior to those of the reference catalyst. The catalyst also exhibited excellent nickel and vanadium passivation performance, strong bottoms upgrading selectivity, and better gasoline and coke selectivity. In comparison to the reference catalyst, the yields of the gasoline and light oil increased by 1.61 and 1.31 percentage points, respectively, and the coke yield decreased by 0.22 percentage points, and the olefin content in the produced gasoline reduced by 2.51 percentage points, with the research octane number increased by 0.7 unit.

PREPARATION,CHARACTERIZATION AND HYDROGENATION PROPERTY OF POLYMER-SUPPORTED Pd-Fe_2O_3 COMPOSITE CATALYSTS

A series of polymer- supported Pd -Fe2O3 composite catalysts were prepared and their hydrogenation property mas investigated. It was found that the above catalysts have good catalytic hydrogenation activity for carbon - carbon double bonds systems and reusability. Furthermore, XPS and IR spectra shouted that active component in the composite catalysts is atomic Pd(0). An addition of a small amount of Fe2O3 has a promotive action upon hydrogenation activity of the catalysts, which indicated that there are some strong interactions (electron transfer) between Pd(0) and Fe(Ⅲ) species. Based on these results, a possible catalytic hydrogenation mechanism was also suggested.

Improved ethane conversion to ethylene and aromatics over a Zn/ZSM-5 and CaMnO^(3-δ) composite catalyst

Ethane conversion to ethylene and aromatics over Zn/zeolite catalysts is a promising technology for efficient exploitation of light alkanes. However, the reaction faces two major hurdles including the limited ethane conversion due to thermodynamics and the drastic catalyst deactivation by kinetical coke accumulation. Here we present a route to improve ethane conversion using a composite catalyst, involving Zn/HZSM-5 for ethane dehydroaromatization and CaMnO3-δperovskite for in situ selective hydrogen oxidation. The in situ H2 consumption shifts ethane dehydrogenation equilibrium to the desired side and can obviously increase the yield of target product. Furthermore, it is found that the in situ generated H2 O through H2 combustion can significantly suppress the coke formation and consequently enhance the stability of the composite catalyst. After 400 min reaction, a product yield of 23% was retained over the composite catalyst, almost a threefold increase with respect to the Zn/HZSM-5 reference(8%). It is anticipated that this novel composite catalyst combined with an efficient reactor technology may improve the viability of ethane aromatization in utilization.

SYNTHESIS AND PROPERTIES OF A NOVEL COMPOSITE ZSM-5 ZEOLITE/VERMICULITE CATALYST

The composite ZSM—5 zeolite/vermiculite catalyst,in which tiny ZSM—5 zeolite parti- cles embedded in the vermiculite substrate,has been synthesized by hydrothermal method with vermiculite as silicon source.The catalytic behavior of resulting catalyst for xylene isomerization,propylene aromatization and toluene disproportionation is better than that of HZSM—5 zeolite.

Ag_3PO_4/Ag_2CO_3 p–n heterojunction composites with enhanced photocatalytic activity under visible light

Formation of a p–n heterojunction rather than p-type or n-type semiconductors can enhance the separation of photogenerated electrons and holes and increase the quantum efficiency of photocatalytic reactions owing to the difference of the electric potential in the inner electric field near the junction,pointing from n toward p. n-Ag3PO4/p-Ag2CO3 p–n heterojunction composites are prepared through a facile coprecipitation process. The obtained Ag3PO4/Ag2CO3 p–n heterojunctions exhibit excellent photocatalytic performance in the removal of rhodamine B（RhB） compared with Ag3PO4 and Ag2CO3. The 40%-Ag3PO4/Ag2CO3 composite photocatalyst（40 mol% Ag3PO4 and 60 mol% Ag2CO3） exhibits the best photocatalytic activity under visible light,demonstrating the ability to completely degrade RhB within 15 min. Transient photovoltage characterization and an active species trapping experiment further indicate that the formation of a p–n heterojunction structure can greatly enhance the separation efficiency of photogenerated carriers and produce more free h＋active species,which is the predominant contributor for RhB removal.

Photocatalytic activity and kinetics for acid yellow degradation over surface composites of TiO_2-coated activated carbon under different photocatalytic conditions

TiO2-coated activated carbon surface （TAs） composites were prepared by a sol-gel method with supercritical pretreatment. The photocatalytic degradation of acid yellow （AY） was investigated under UV radiation to estimate activity of catalysts and determine the kinetics. And the effects of parameters including the initial concentration of AY, light intensity and TiO2 content in catalysts were examined. The results indicate that TAs has a higher efficiency in decomposition of AY than P25, pure TiO2 particles as well as the mixture of TiO2 powder and active carbon. The photocatalytic degradation rate is found to follow the pseudo-first order kinetics with respect to the AY concentration. The new kinetic model fairly resembles the classic Langmuir-Hinshelwood equation, and the rate constant is proportional to the square root of the light intensity in a wide range. However, its absorption performance depends on the surface areas of catalysts. The model fits quite well with the experimental data and elucidates phenomena about the effects of the TiO2 content in TAs on the degradation rate.

The effect of the support on the surface composition of PtCu alloy nanocatalysts: In situ XPS and HS-LEIS studies

Supported PtCu alloys have been broadly applied in heterogeneous catalysis and electrocatalysis owing to their excellent catalytic performance and high CO tolerance. It is important to analyze the outermost surface composition of the supported alloy nanoparticles to understand the nature of the catalytically active sites. In this paper, homogeneous face-centered cubic PtCu nanoparticles with a narrow particle size distribution were successfully fabricated and dispersed on a high-surface-area Ti〇2 powder support. The samples were oxidized and reduced in situ and then introduced into the ultrahigh vacuum chamber to measure the topmost surface composition by high-sensitivity low-energy ion scattering spectroscopy, and to determine the oxidation states of the elements by X-ray photoelectron spectroscopy. The surface composition and morphology, elemental distribu-tion, and oxidation states of the components were found to be significantly affected by the support and treatment conditions. The PtCu is de-alloyed upon oxidation with CuO wetting on the TiO2 sur-face and re-alloyed upon reduction. Phase diagrams of the surface composition and the bulk com-position were plotted and compared for the supported and unsupported materials.