The SiO2 and g-Al2O3 supported MoOx catalyst and a MoOx-SiO2 catalyst have been studied in a conventional fixed-bed flow reactor for n-alkanes isomerization. It is shown that the MoOx-SiO2 catalyst with SiO2 framewor...The SiO2 and g-Al2O3 supported MoOx catalyst and a MoOx-SiO2 catalyst have been studied in a conventional fixed-bed flow reactor for n-alkanes isomerization. It is shown that the MoOx-SiO2 catalyst with SiO2 framework, in which the bulk MoOx phase is large enough to form typical mesoporous structure, is promising in terms of its advantages of both improved mechanical strength and high catalytic properties over the supported MoOx and bulk MoOx catalyst.展开更多
In this paper, an MoOx film is deposited on a polyethylene terephthalate （PET） substrate as a buffer layer to improve the surface roughness of the flexible PET substrate. With an optimized MoOx thickness of 100 nm, ...In this paper, an MoOx film is deposited on a polyethylene terephthalate （PET） substrate as a buffer layer to improve the surface roughness of the flexible PET substrate. With an optimized MoOx thickness of 100 nm, the surface roughness of the PET substrate can be reduced to a very small value of 0.273 nm （much less than 0.585 nm of the pure PET）. Flexible white top-emitting organic light-emitting diodes （TEOLEDs） with red and blue dual phosphorescent emitting layers are constructed based on a low-reflectivity Sm/Ag semi-transparent cathode. The flexible white emission exhibits the best luminance and current injection characteristics with the 100-nm-thick MoOx buffer layer and this result indicates that a smooth substrate is beneficial to the enhancement of device electrical and electroluminescence performances. However, the white TEOLED with a 50-nm-thick MoOx buffer layer exhibits a maximum current efficiency of 4.64 cd/A and a power efficiency of 1.9 lm/W, slightly higher than those with a 100-nm MoOx buffer layer, which is mainly due to an obvious intensity enhancement but limited current increases in 50-nm MoOx-based white TEOLED. The change amplitudes of the Commission International de l’Eclairage （CIE） chromaticity coordinates are less than （0.016, 0.005） for all devices in a wide luminance range over 100 cd/m2, indicating an excellent color stability in our white flexible TEOLEDs. Additionally, the flexible white TEOLED with an MoOx buffer layer shows excellent flexibility to withstand more than 500 bending times under a curvature radius of approximately 9 mm. Research demonstrates that it is mainly attributed to the high surface energy of the MoOx buffer layer, which is conducible to the improvement of the surface adhesion to the PET substrate and the Ag anode.展开更多
A partially reduced molybdenum oxide (MoOx) with meso-porosity was prepared for the first time and its catalytic performance in n-heptane isomerization carried out in a fixed bed flow reactor has been studied. And th...A partially reduced molybdenum oxide (MoOx) with meso-porosity was prepared for the first time and its catalytic performance in n-heptane isomerization carried out in a fixed bed flow reactor has been studied. And the evolvement of MoOx formation has been characterized by X-ray diffraction and catalytic performance in n-heptane isomerization. The MoOx catalyst obtained from H2 reduction for 12 h, possessing a maximum pore volume at diameter ca. 4.1 nm, exhibited high activity in n-heptane isomerization. The composition of this catalyst is of the predominant MoOx phases, MoO2 phase and trace amount of metal Mo phase.展开更多
In the past decades there have been many breakthroughs in low-dimensional materials,especially in two-dimensional(2D)atomically thin crystals like graphene.As structural analogues of graphene but with a sizeable band ...In the past decades there have been many breakthroughs in low-dimensional materials,especially in two-dimensional(2D)atomically thin crystals like graphene.As structural analogues of graphene but with a sizeable band gap,monolayers of atomically thin transition metal dichalcogenides(with formula of MX2,M=Mo,W;X=S,Se,Te,etc.)have emerged as the ideal 2D prototypes for exploring fundamentals in physics such as valleytronics due to the quantum confinement effects,and for engineering a wide range of nanoelectronic,optoelectronic,and photocatalytic applications.Transition metal trioxides as promising materials with low evaporation temperature,high work function,and inertness to air have been widely used in the fabrication and modification of MX2.In this review,we reported the fabrications of one-dimensional MoS2 wrapped MoO2 single crystals with varied crystal direction via atmospheric pressure chemical vapor deposition method and of 2D MoOx covered MoX2 by means of exposing MoX2 to ultraviolet ozone.The prototype devices show good performances.The approaches are common to other transition metal dichalcogenides and transition metal oxides.展开更多
文摘The SiO2 and g-Al2O3 supported MoOx catalyst and a MoOx-SiO2 catalyst have been studied in a conventional fixed-bed flow reactor for n-alkanes isomerization. It is shown that the MoOx-SiO2 catalyst with SiO2 framework, in which the bulk MoOx phase is large enough to form typical mesoporous structure, is promising in terms of its advantages of both improved mechanical strength and high catalytic properties over the supported MoOx and bulk MoOx catalyst.
基金Project supported by the National Key Basic Research and Development Program of China(Grant No.2009CB930600)the National Natural Science Founda-tion of China(Grant Nos.61274065,60907047,51173081,and 61136003)the"333"and"Qing Lan"Program of Jiangsu Province,and the"Qing Lan"and"Pandeng"Project of Nanjing University of Posts and Telecommunications(Grant Nos.NY210040,NY211069,and NY 210015)
文摘In this paper, an MoOx film is deposited on a polyethylene terephthalate （PET） substrate as a buffer layer to improve the surface roughness of the flexible PET substrate. With an optimized MoOx thickness of 100 nm, the surface roughness of the PET substrate can be reduced to a very small value of 0.273 nm （much less than 0.585 nm of the pure PET）. Flexible white top-emitting organic light-emitting diodes （TEOLEDs） with red and blue dual phosphorescent emitting layers are constructed based on a low-reflectivity Sm/Ag semi-transparent cathode. The flexible white emission exhibits the best luminance and current injection characteristics with the 100-nm-thick MoOx buffer layer and this result indicates that a smooth substrate is beneficial to the enhancement of device electrical and electroluminescence performances. However, the white TEOLED with a 50-nm-thick MoOx buffer layer exhibits a maximum current efficiency of 4.64 cd/A and a power efficiency of 1.9 lm/W, slightly higher than those with a 100-nm MoOx buffer layer, which is mainly due to an obvious intensity enhancement but limited current increases in 50-nm MoOx-based white TEOLED. The change amplitudes of the Commission International de l’Eclairage （CIE） chromaticity coordinates are less than （0.016, 0.005） for all devices in a wide luminance range over 100 cd/m2, indicating an excellent color stability in our white flexible TEOLEDs. Additionally, the flexible white TEOLED with an MoOx buffer layer shows excellent flexibility to withstand more than 500 bending times under a curvature radius of approximately 9 mm. Research demonstrates that it is mainly attributed to the high surface energy of the MoOx buffer layer, which is conducible to the improvement of the surface adhesion to the PET substrate and the Ag anode.
文摘A partially reduced molybdenum oxide (MoOx) with meso-porosity was prepared for the first time and its catalytic performance in n-heptane isomerization carried out in a fixed bed flow reactor has been studied. And the evolvement of MoOx formation has been characterized by X-ray diffraction and catalytic performance in n-heptane isomerization. The MoOx catalyst obtained from H2 reduction for 12 h, possessing a maximum pore volume at diameter ca. 4.1 nm, exhibited high activity in n-heptane isomerization. The composition of this catalyst is of the predominant MoOx phases, MoO2 phase and trace amount of metal Mo phase.
基金Project supported by the National Natural Science Foundation of China(Grant No.11874427)the National Science Foundation DMR-1903962the Fundamental Research Funds for the Central Universities of Central South University(Grant No.2019zzts429).
文摘In the past decades there have been many breakthroughs in low-dimensional materials,especially in two-dimensional(2D)atomically thin crystals like graphene.As structural analogues of graphene but with a sizeable band gap,monolayers of atomically thin transition metal dichalcogenides(with formula of MX2,M=Mo,W;X=S,Se,Te,etc.)have emerged as the ideal 2D prototypes for exploring fundamentals in physics such as valleytronics due to the quantum confinement effects,and for engineering a wide range of nanoelectronic,optoelectronic,and photocatalytic applications.Transition metal trioxides as promising materials with low evaporation temperature,high work function,and inertness to air have been widely used in the fabrication and modification of MX2.In this review,we reported the fabrications of one-dimensional MoS2 wrapped MoO2 single crystals with varied crystal direction via atmospheric pressure chemical vapor deposition method and of 2D MoOx covered MoX2 by means of exposing MoX2 to ultraviolet ozone.The prototype devices show good performances.The approaches are common to other transition metal dichalcogenides and transition metal oxides.
