Simulation of Radio Path Strength for Multipath Propagation in Land Mobile Communications

Based on the characteristics of the radio propagation in land mobile communications environment, a theoretical model for the reflecting(scattering) number of each radio path is derived firstly. This model can be used to predict the variation of radio path strength, which is important for practical mobile communications engineering. Using this model, a method for simulating radio path strength is developed, with numerical results presented.

Optimizing Spatial Crowdsourcing:A Quality-Aware Task Assignment Approach for Mobile Communication

The widespread use of advanced electronic devices has led to the emergence of spatial crowdsourcing,a method that taps into collective efforts to perform real-world tasks like environmental monitoring and traffic surveillance.Our research focuses on a specific type of spatial crowdsourcing that involves ongoing,collaborative efforts for continuous spatial data acquisition.However,due to limited budgets and workforce availability,the collected data often lacks completeness,posing a data deficiency problem.To address this,we propose a reciprocal framework to optimize task assignments by leveraging the mutual benefits of spatiotemporal subtask execution.We introduce an entropy-based quality metric to capture the combined effects of incomplete data acquisition and interpolation imprecision.Building on this,we explore a quality-aware task assignment method,corresponding to spatiotemporal assignment strategies.Since the assignment problem is NP-hard,we develop a polynomial-time algorithm with the guaranteed approximation ratio.Novel indexing and pruning techniques are proposed to further enhance performance.Extensive experiments conducted on datasets validate the effectiveness of our methods.

Energy Minimization for Heterogenous Traffic Coexistence with Puncturing in Mobile Edge Computing-Based Industrial Internet of Things

Puncturing has been recognized as a promising technology to cope with the coexistence problem of enhanced mobile broadband(eMBB) and ultra-reliable low latency communications(URLLC)traffic. However, the steady performance of eMBB traffic while meeting the requirements of URLLC traffic with puncturing is a major challenge in some realistic scenarios. In this paper, we pay attention to the timely and energy-efficient processing for eMBB traffic in the industrial Internet of Things(IIoT), where mobile edge computing(MEC) is employed for data processing. Specifically, the performance of eMBB traffic and URLLC traffic in a MEC-based IIoT system is ensured by setting the threshold of tolerable delay and outage probability, respectively. Furthermore,considering the limited energy supply, an energy minimization problem of eMBB device is formulated under the above constraints, by jointly optimizing the resource blocks(RBs) punctured by URLLC traffic, data offloading and transmit power of eMBB device. With Markov's inequality, the problem is reformulated by transforming the probabilistic outage constraint into a deterministic constraint. Meanwhile, an iterative energy minimization algorithm(IEMA) is proposed.Simulation results demonstrate that our algorithm has a significant reduction in the energy consumption for eMBB device and achieves a better overall effect compared to several benchmarks.

Analysis of handoff in distributed mobile communications system based on remote antenna unit selection

A remote antenna unit （RAU） selection model is presented, and two kinds of handoffs, intra-cell handoff （HO） and inter-cell HO, are defined in distributed mobile communications systems （DAS）. After that, an inter-cell HO model is proposed, in which the average power of the active set （AS） is used to predict the position of the mobile station （MS）. The total power of the AS and the handoff set （HOS） are utilized to determine whether an inter-cell HO is necessary. Furthermore, the relationship between HO parameters and performance metrics is studied in detail based on RAU selection. Simulation results show that both the intra-cell HO and the inter-cell HO can achieve oerfect performance by aoprooriate settings of HO parameters.

Mobile Edge Communications, Computing, and Caching(MEC3) Technology in the Maritime Communication Network

With the increasing maritime activities and the rapidly developing maritime economy, the fifth-generation(5G) mobile communication system is expected to be deployed at the ocean. New technologies need to be explored to meet the requirements of ultra-reliable and low latency communications(URLLC) in the maritime communication network(MCN). Mobile edge computing(MEC) can achieve high energy efficiency in MCN at the cost of suffering from high control plane latency and low reliability. In terms of this issue, the mobile edge communications, computing, and caching(MEC3) technology is proposed to sink mobile computing, network control, and storage to the edge of the network. New methods that enable resource-efficient configurations and reduce redundant data transmissions can enable the reliable implementation of computing-intension and latency-sensitive applications. The key technologies of MEC3 to enable URLLC are analyzed and optimized in MCN. The best response-based offloading algorithm(BROA) is adopted to optimize task offloading. The simulation results show that the task latency can be decreased by 26.5’ ms, and the energy consumption in terminal users can be reduced to 66.6%.

Forecasting promising technology using analysis of patent information:Focused on next generation mobile communications

In order to forecast promising technologies in the field of next generation mobile communication, various patent indicators were analyzed such as citation per patent, patent family information, patent share, increase rate, and patent activity. These indicators were quantified into several indexes and then integrated into an evaluation score to provide promising technologies. As a result of the suggested patent analysis, four technologies out of twenty two in details classification were selected, which showed outstanding technology competitiveness, high patent share and increasing rates as well as high recent-patent-ratios and triad-patent-family-ratios. Each of the selected technologies scored more than 10 points in total, and the following four technologies were suggested as promising ones in the field of next generation mobile communication: 1) 3GPP based mobile communication, 2) beyond 4G mobile communication, 3) IEEE 802.16 based mobile communication, which are in medium classification of broadband mobile communication system, and 4) testing/certification system of mobile communication, which is in medium classification of mobile communication testing/certification system.

Future Mobile Terminal and Network Access Architecture for China 4G Open Mobile Communications

This paper relates to an advanced open mobile communication system and method of integrating the mobile communications, wireless access systems and wired communications into one common platform architecture for China's 4th generation mobile communications, supporting costeffective broadband voice, data and video services in wireless, mobile and wired environment with one single integrated mobile terminal device. The paper includes new architecture in the integrated mobile device and converged network access, and minimum modifi cation in the existing mobile telecommunication infrastructures. This paper introduces the long-term evolution strategy for China's TDD system platform towards China's future 4G mobile communications.

A Novel 28 GHz Phased Array Antenna for 5G Mobile Communications

A novel phased array antenna consisting of 256 elements is presented and experimentally verified for 5G millimeter-wave wireless communications.The antenna integrated with a wave control circuit can perform real-time beam scanning by reconfiguring the phase of an antenna unit.The unit,designed at 28 GHz using a simple patch structure with one PIN diode,can be electronically controlled to generate 1 bit phase quantization.A prototype of the antenna is fabricated and measured to demonstrate the feasibility of this approach.The measurement results indicate that the antenna achieves high gain and fast beam-steering,with the scan beams within±60°range and the maximum gain up to 21.7 dBi.Furthermore,it is also tested for wireless video transmission.In ZTE Shanghai,the antenna was used for the 5G New Radio(NR)test.The error vector magnitude(EVM)is less than 3%and the adjacent channel leakage ratio(ACLR)less than−35 dBc,which can meet 5G system requirements.Compared with the conventional phased array antenna,the proposed phased array has the advantages of low power consumption,low cost and conformal geometry.Due to these characteristics,the antenna is promising for wide applications in 5G millimeter-wave communication systems.

A NOVEL MODULATION FOR MOBILE SATELLITE COMMUNICATIONS

It is a challenging problem to design a high performance modulation for mobile satellite communications due to the limited power and bandwidth resource.The paper improves Feher patented Quadrature Phase Shift Keying(FQPSK) by redefining the waveform.The novel FQPSK,with con-stant envelope,can be used to improve the power efficiency and frequency efficiency of mobile satellite communication.The study shows that the improved FQPSK outperforms conventional FQPSK over AWGN and is immune to the non-linearity of high power amplifier.At last,the impact of flat fading and multi-path fading of channel on the BER performance of improved modulation is analyzed.

Research Framework of B3G Mobile Communications Systems

Compared with the services in 3G, services in Beyond 3G (B3G) have some distinctive characteristics such as the packet data services being the majority, more service types, larger scale of services, higher peak transmission rate, enlarged range of transmission rates, more spatial and temporal distribution differences, and more service transmission requests occurring in fast moving vehicles. In order to meet the requirements of B3G services, the B3G systems must have great improvement in network architecture, air interface scheme, radio resource allocation strategy, frequency bands, and Radio Frequency (RF) technology etc. Therefore, the research of the B3G systems should focus on the theory of generalized cellular communications networks, theory of the Multiple Input Multiple Output (MIMO) wireless transmission system, matching of radio resources to new-type air interfaces, new iterative detection and adaptive link methods, and new-type antenna and RF technologies.

Advances in Mobile Data Communications

This special issue of ZTE Communications focuses on recent advances in mobile data communications for the ICT and telecommunications industries. The ever-increasing amount of mobile data traffic has beenthe subject of many studies. This research area is widely applicable to contemporary technology and network optimization techniques.

MIS-Grid for Future Mobile Communications

The dilemma of modern mobile communications technology is analyzed. Aiming at some problems in the 3G systems, a new network architecture is proposed on the principle of mobile information sharing grid (MIS-Grid). The essence of MIS-Grid is to transfer the hot wide band information with cheap unidirectional broadcasting channels and the personalized services with relatively expensive interactive networks.

Reflection on the Development of Satellite Communications and the Integration with Terrestrial Mobile Communications

With the further reduction in cost and the increase in bandwidth, as well as the increase in internet applications, satellite communications are gradually shifting from a complementary role to becoming a fully integrated component of terrestrial communications networks. This paper firstly introduces the development of satellite communications, mobile communications and the global space-terrestrial integrated network. We then propose the functional architecture and network architecture for the integration of satellite communications and terrestrial mobile communications based on 5 G core networks. Finally, in order to support the network of the future, four key technologies are presented, a space-terrestrial integrated air interface design, a multi-band space-terrestrial integrated transmission waveform design, space-terrestrial integrated switching and routing technology, along with spectrum sharing and interference coordination technology, all necessary for the development of space-terrestrial integrated networks.

Predictive Tracking Implementation for Mobile Communication Using Programmable Metasurface

The programmable metasurface(PM)is an antenna array architecture that realizes flexible beam steering.This functionality is achieved by controlling the unit cells designed with micro components such as positive-intrinsic-negative(PIN)diodes,which offers potential cost reductions in the next generation wireless communication systems.Although PM has been a popular topic in antenna design,its implementations in real-time systems accompanied by signal processing algorithms are challenging.In this paper,novel predictive tracking algorithms for mobile communication scenarios using a PM are created and implemented in a real-time system operating at 28 GHz.An angular speed prediction(ASP)algorithm is proposed to compute the position of user equipment(UE)based on the previously recorded beam directions.As another solution,an angle correction(AC)algorithm is proposed to further improve the prediction and tracking accuracy.As a benchmark,the comparisons to a previous PM tracking algorithm without prediction are presented.Both simulation and measurement results show that the prediction algorithms successfully improve the tracking performance,which also prove the feasibilities of PM-based systems to solve complex real-time signal processing problems.

Locating Global System for Mobile Communication(GSM)Base Stations Using Geographic Information System(GIS)

The global system for mobile communication(GSM)is planned to meet the needs of the whole subscribers.The number of subscribers increased as the population increased due to the acceptance of GSM services by the subscribers.Thus,there should be a way to monitor base stations that will meet the increasing demand of subscribers in any area as a population surge will lead to more subscriptions.This will allow GSM network operators to serve their subscribers better and ease network congestion.This work presents a review of mobile evolution from the first generation to the fifth generation.A review of global positioning system(GPS)technology and its applications to geographic information systems(GIS)was done.The coordinates of these base stations were taken using a GPS device.These base station coordinates were then exported to QGIS for the design of the map.Thereafter,the output map was then integrated into the website.The discussions on the results followed and some useful suggestions given will go a long way to help the operators of GSM in Nigeria and in general.If the propositions given are adhered to,it will go a long way to help the operators reduce congestion on their network and thereby increase the satisfaction of the subscribers.

Satellite and high altitude platform-based inter-vehicle communications in vast and desolate areas

In order to solve the problem of inter-vehicle communication （IVC） in vast and desolate areas such as the desert and the Gobi, two vehicle network models are proposed. One is based on satellite communication and the other is based on high altitude platform （ HAP ） communication. The system outline and networking modes of the two models are described. In the satellite communication based model, all the vehicles are equipped with vehicle-bone satellite communication on the move terminals and the communication signals between vehicles are forwarded by satellite. In the high altitude platform-based model, the HAPs are equipped with base station facilities to form aerial base stations, and vehicles can communicate with each other via common terrestrial mobile communication devices. Some key parameters such as path loss, link loss and system capacity are also computed. The analysis shows that both the two models can satisfy the requirement of IVC in the descriptive environment.

Design Framework of Unsourced Multiple Access for 6G Massive IoT

In this paper,ambient IoT is used as a typical use case of massive connections for the sixth generation(6G)mobile communications where we derive the performance requirements to facilitate the evaluation of technical solutions.A rather complete design of unsourced multiple access is proposed in which two key parts:a compressed sensing module for active user detection,and a sparse interleaver-division multiple access(SIDMA)module are simulated side by side on a same platform at balanced signal to noise ratio(SNR)operating points.With a proper combination of compressed sensing matrix,a convolutional encoder,receiver algorithms,the simulated performance results appear superior to the state-of-the-art benchmark,yet with relatively less complicated processing.

Adaptive Resource Allocation Algorithm for 5G Vehicular Cloud Communication

The current resource allocation in 5G vehicular networks for mobile cloud communication faces several challenges,such as low user utilization,unbalanced resource allocation,and extended adaptive allocation time.We propose an adaptive allocation algorithm for mobile cloud communication resources in 5G vehicular networks to address these issues.This study analyzes the components of the 5G vehicular network architecture to determine the performance of different components.It is ascertained that the communication modes in 5G vehicular networks for mobile cloud communication include in-band and out-of-band modes.Furthermore,this study analyzes the single-hop and multi-hop modes in mobile cloud communication and calculates the resource transmission rate and bandwidth in different communication modes.The study also determines the scenario of one-way and two-way vehicle lane cloud communication network connectivity,calculates the probability of vehicle network connectivity under different mobile cloud communication radii,and determines the amount of cloud communication resources required by vehicles in different lane scenarios.Based on the communication status of users in 5G vehicular networks,this study calculates the bandwidth and transmission rate of the allocated channels using Shannon’s formula.It determines the adaptive allocation of cloud communication resources,introduces an objective function to obtain the optimal solution after allocation,and completes the adaptive allocation process.The experimental results demonstrate that,with the application of the proposed method,the maximum utilization of user communication resources reaches approximately 99%.The balance coefficient curve approaches 1,and the allocation time remains under 2 s.This indicates that the proposed method has higher adaptive allocation efficiency.

A Review of Artificial Intelligence Applications in Contemporary Computer Network Technologies

Rapid advancement in science and technology has seen computer network technology being upgraded constantly, and computer technology, in particular, has been applied more and more extensively, which has brought convenience to people’s lives. The number of people using the internet around the globe has also increased significantly, exerting a profound influence on artificial intelligence. Further, the constant upgrading and development of artificial intelligence has led to the continuous innovation and improvement of computer technology. Countries around the world have also registered an increase in investment, paying more attention to artificial intelligence. Through an analysis of the current development situation and the existing applications of artificial intelligence, this paper explicates the role of artificial intelligence in the face of the unceasing expansion of computer network technology.

System Integration of Terrestrial Mobile Communication and Satellite Communication——The Trends, Challenges and Key Technologies in B5G and 6G

Mobile communication standards have been developed into a new era of B5G and 6G.In recent years,low earth orbit(LEO)satellites and space Internet have become hot topics.The integrated satellite and terrestrial systems have been widely discussed by industries and academics,and even are expected to be applied in those huge constellations in construction.This paper points out the trends of two stages towards system integration of the terrestrial mobile communication and the satellite communications:to be compatible with 5G,and to be integrated within 6G.Based on analysis of the challenges of both stages,key technologies are thereafter analyzed in detail,covering both air interface currently discussed in 3GPP for B5G and also novel network architecture and related transmission technologies toward future 6G.