Modeling Methane Emission from Rice Paddy Soils:Ⅱ.Model Validation and Application

A simulation model developed by the authors (Huang et al., 1999) was validated against independent field measurements of methane emission from rice paddy soils in Texas of USA, Tuzu Of China and Vercelli of Italy.A simplified version of the simulation model was further validated against methane emission measurements from various regions of the world, including italy, China, Indonesia, Philippines and the United States. Model validation suggested that the seasonal variation of methane emission was mainly regulated by rice growth and development and that methane emission could be predicted from rice net productivity, cultivar character, soil texture and temperature, and organic matter amendments. Model simulations in general agreed with the observations. The comparison between computed and measured methane emission resulted in correlation coefficients r2 values from 0.450 to 0.952, significant at 0.01-0.001 probability level.On the basis of available information on rice cultivated area, growth duration, grain yield, soil texture and temperature, methane emission from rice paddy soils of China's Mainland was estimated for 28 rice cultivated provinces/municipal cities by employing the validated model. The calculated daily methane emission rates, on a provincial scale, ranged from 0.12 to 0.71 g m-2 with an average of 0.26 g m-2. A total amount of 7.92 Tg CH4 per year, ranging from 5.89 to 11.17 Tg year-1, was estimated to be released from Chinese rice paddy soils. Of the total, 45% was emitted from the single-rice growing season, and 19% and 36% were from the early-rice and the late-rice growing seasons, respectively. Approximately 70% of the total was emitted in the region located at latitude between 25°and 32°N. The emissions from rice fields in Sichuan and Hunan provinces were calculated to be 2.34 Tg year-1, accounting for approximately 30% of the total.

Comparison on Winter Wheat Yield Estimating Models Based on Radarsat-2 and HJ Satellite in Huaihe River Region

The establishment of crop yield estimating model based on microwave and optical satellite images can conduct the mutual verification of the accuracy of the reported crop yield and the precision of the estimating model. With Shou County and Huaiyuan County of Anhui Province as the experimental fields of winter wheat producing areas, the linear winter wheat yield estimating models were established by adopting backscattering coefficient and Normalized Difference Vegetation Index（NDVI） based on images from the synthetic aperture radar（SAR）—RDARSAT-2 and HJ satellite photographed in mid-April and early May, 2014, and then comparisons were conducted on the accuracy of the yield estimating models. The accuracies of the yield estimating models established using co-polarized（HH） and cross-polarized（HV） modes of SAR in Jiangou Town, Shou County were 68.37% and 74.01%, respectively, while the accuracies in Longkang Town, Huaiyuan County were 63.10%and 69.10%, respectively. Accuracies of yield estimating models established by HJ satellite data were 69.52% and 66.43% in Shou County and Huaiyuan County, respectively. Accuracies of winter yield estimating model based on HJ satellite data and that based on SAR were closed, and the yield difference of winter wheat in the lodging region was analyzed in detail. The model results laid the foundation and accumulated experience for the verification, parameters correction and promotion of the winter wheat yield estimating model.

Robust design of sliding mode control for airship trajectory tracking with uncertainty and disturbance estimation

The robotic airship can provide a promising aerostatic platform for many potential applications.These applications require a precise autonomous trajectory tracking control for airship.Airship has a nonlinear and uncertain dynamics.It is prone to wind disturbances that offer a challenge for a trajectory tracking control design.This paper addresses the airship trajectory tracking problem having time varying reference path.A lumped parameter estimation approach under model uncertainties and wind disturbances is opted against distributed parameters.It uses extended Kalman filter(EKF)for uncertainty and disturbance estimation.The estimated parameters are used by sliding mode controller(SMC)for ultimate control of airship trajectory tracking.This comprehensive algorithm,EKF based SMC(ESMC),is used as a robust solution to track airship trajectory.The proposed estimator provides the estimates of wind disturbances as well as model uncertainty due to the mass matrix variations and aerodynamic model inaccuracies.The stability and convergence of the proposed method are investigated using the Lyapunov stability analysis.The simulation results show that the proposed method efficiently tracks the desired trajectory.The method solves the stability,convergence,and chattering problem of SMC under model uncertainties and wind disturbances.

Model Estimation of Volatilization of Ammonia Appliedwith Surface Film-Forming Material

Greenhouse experiments were conducted to determine the ammonia volatilization loss with or withoutapplication of surface film-forming material (SFFM). Ammonia volatilization loss was estimated by the modeldeveloped by Jayaweera and Mikkelsen. The results showed that the model could estimate and predict wellammonia volatilization loss also in case of SFFM addition. There was an emended factor B introduced tothe model calculation when SFPM was used. Simulated calculation showed that the effect of factor B onNHa loss was obvious. The value of B was governed by SFFM and the environmental conditions. Sensitivityanalysis suggested that pH was the main factor coatrolling NH3 volatilization loss from the floodwater.

Airship aerodynamic model estimation using unscented Kalman filter

An airship model is made-up of aerostatic,aerodynamic,dynamic,and propulsive forces and torques.Besides others,the computation of aerodynamic forces and torques is difficult.Usually,wind tunnel experimentation and potential flow theory are used for their calculations.However,the limitations of these methods pose difficulties in their accurate calculation.In this work,an online estimation scheme based on unscented Kalman filter(UKF)is proposed for their calculation.The proposed method introduces six auxiliary states for the complete aerodynamic model.UKF uses an extended model and provides an estimate of a complete state vector along with auxiliary states.The proposed method uses the minimum auxiliary state variables for the approximation of the complete aerodynamic model that makes it computationally less intensive.UKF estimation performance is evaluated by developing a nonlinear simulation environment for University of Engineering and Technology,Taxila(UETT)airship.Estimator performance is validated by performing the error analysis based on estimation error and 2-σ uncertainty bound.For the same problem,the extended Kalman filter(EKF)is also implemented and its results are compared with UKF.The simulation results show that UKF successfully estimates the forces and torques due to the aerodynamic model with small estimation error and the comparative analysis with EKF shows that UKF improves the estimation results and also it is more suitable for the under-consideration problem.

Empirical-Statistical Models Based on Remote Sensing for Estimating the Volume of Landslides Induced by the Wenchuan Earthquake

The Wenchuan Ms 8.0 earthquake on May 12, 2008 induced a huge number of landslides. The distribution and volume of the landslides are very important for assessing risks and understanding the landslide - debris flow - barrier lake - bursts flood disaster chain. The number and the area of landslides in a wide region can be easily obtained by remote sensing technique, while the volume is relatively difficult to obtain because it requires some detailed geometric information of slope failure surface and sub-surface. Different empirical models for estimating landslide volume were discussed based on the data of 107 landslides in the earthquake-stricken area. The volume data of these landslides were collected by field survey. Their areas were obtained by interpreting remote sensing images while their apparent friction coefficients and height were extracted from the images unifying DEM (digital elevation model). By analyzing the relationships between the volume and the area, apparent friction coefficients, and the height, two models were established, one for the adaptation of a magnitude scale landslide events in a wide range of region, another for the adaptation in a small scope. The correlation coefficients (R2) are 0.7977 and 0.8913, respectively. The results estimated by the two models agree well with the measurement data.

Evaluating the grassland net primary productivity of southern China from 2000 to 2011 using a new climate productivity model

Grassland is the important component of the terrestrial ecosystems. Estimating net primary productivity （NPP） of grassland ecosystem has been a central focus in global climate change researches. To simulate the grassland NPP in southern China, we built a new climate productivity model, and validated the model with the measured data from different years in the past. The results showed that there was a logarithmic correlation between the grassland NPP and the mean annual temperature, and there was a linear positive correlation between the grassland NPP and the annual precipitation in southern China. Al these results reached a very signiifcant level （P〈0.01）. There was a good correlation between the simulated and the measured NPP, withR2 of 0.8027, reaching the very signiifcant level. Meanwhile, both root mean square errors （RMSE） and relative root-mean-square errors （RRMSE） stayed at a relatively low level, showing that the simulation results of the model were reliable. The NPP values in the study area had a decreasing trend from east to west and from south to north, and the mean NPP was 471.62 g C m？2 from 2000 to 2011. Additionaly, there was a rising trend year by year for the mean annual NPP of southern grassland and the tilt rate of the mean annual NPP was 3.49 g C m？2 yr？1 in recent 12 years. The above results provided a new method for grassland NPP estimation in southern China.

Estimating Aboveground Fresh Biomass of Different Cotton Canopy Types with Homogeneity Models Based on Hyper Spectrum Parameters

AGB （aboveground fresh biomass） is one of the most important parameters of the crop condition monitored with remote sensing. Hyper spectrum remote sensing with the fine spectrum information becomes the efficient method estimating the vegetation AGB. The research was conducted in Xinjiang, the largest cotton planting region of China. The paper analyzed the correlation between the cotton AGB and reflective spectrum and the first derivative spectrum, and the variation coefficient of the waveband reflectance. According to the analysis above, all of 23 parameters, including the hyper spectrum reflectance, the first derivative spectrum parameters and normalization vegetation indexes, were established. And then the estimation models on cotton AGB of relaxing and compact canopy type were established and tested respectively. The tested results showed that Fgo1, [901,502], [901,629], [901,672] among the reflective spectral parameters and D525, D956, D1019, D1751 among the first derivative spectral parameters had the homogenous effect on different cotton canopy types, and the determination coefficients of the models above all arrive at the significant level of 0.99 confidence interval. At last, the tested results of the homogeneity models for different canopy types indicated the parameters of [901, 502], [901,629], [901,672] have more satisfying veracity than others, and the relative errors are as low as 17.0, 16.3 and 16.7% correspondingly; in contrast, the estimation veracity of the first derivative spectrum parameters of single waveband is low.

A New Method for Identifying the Model Error of Adjust ment System

Some theory problems affecting parameter estimation are discussed in this paper. Influence and transformation between errors of stochastic and functional models is pointed out as well. For choosing the best adjustment model, a formula, which is different from the literatures existing methods, for estimating and identifying the model error, is proposed. On the basis of the proposed formula, an effective approach of selecting the best model of adjustment system is given.

Quantitative inverse modeling of nitrogen content from hyperion data under stress of exhausted coal mining sites

Monitoring and evaluating the nutritional status of vegetation under stress from exhausted coal mining sites by hyper-spectral remote sensing is important in future ecological restoration engineering. The Wangpingcun coal mine, located in the Mentougou district of Beijing, was chosen as a case study. The ecological damage was analyzed by 3S technology, field investigation and from chemical data. The derivative spectra of the diagnostic absorption bands are derived from the spectra measured in the field and used as characteristic spectral variables. A correlation analysis was conducted for the nitrogen content of the vegetation samples and the fast derivative spectrum and the estimation model of nitrogen content established by a multiple stepwise linear regression method. The spatial distribution of nitrogen content was extracted by a parameter mapping method from the Hyperion data which revealed the distribution of the nitrogen content. In addition, the estimation model was evaluated for two evaluation indicators which are important for the precision of the model. Experimental results indicate that by linear regression and parameter mapping, the estimation model precision was Very high. The coefficient of determination, R2, was 0.795 and the standard deviation of residual （SDR） 0.19. The nitrogen content of most samples was about 1.03% and the nitrogen content in the study site seems inversely proportional to the distance from the piles of coal waste. Therefore, we can conclude that inversely modeling nitrogen content by hyper-spectral remote sensing in exhausted coal mining sites is feasible and our study can be taken as reference in species selection and in subseauent management and maintenance in ecological restoration.

Cooperative interception with fast multiple model adaptive estimation

For the case that two pursuers intercept an evasive target,the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target,which performs a bang For the case that two pursuers intercept an evasive target,the cooperative strategies and state estimation methods taken by pursuers can seriously affect the guidance accuracy for the target,which performs a bang-bang evasive maneuver with a random switching time.Combined Fast multiple model adaptive estimation(Fast MMAE)algorithm,the cooperative guidance law takes detection configuration affecting the accuracy of interception into consideration.Introduced the detection error model related to the line-of-sight(LOS)separation angle of two interceptors,an optimal cooperative guidance law solving the optimization problem is designed to modulate the LOS separation angle to reduce the estimation error and improve the interception performance.Due to the uncertainty of the target bang-bang maneuver switching time and the effective fitting of its multi-modal motion,Fast MMAE is introduced to identify its maneuver switching time and estimate the acceleration of the target to track and intercept the target accurately.The designed cooperative optimal guidance law with Fast MMAE has better estimation ability and interception performance than the traditional guidance law and estimation method via Monte Carlo simulation.

Path Classification and Estimation Model Based Prognosis of Pneumatic Cylinder Lifetime

Prognosis is a key technology to improve reliability,safety and maintainability of products,a lot of researchers have been devoted to this technology.But to improve the predict accuracy of remaining life of products has been difficult.To predict the lifetime specification of pneumatic cylinders with high reliability and long lifetime and small specimen,this paper put forward the prognosis algorithm based on the path classification and estimation（PACE） model.PACE model is based entirely on failure data instead of failure threshold.Pneumatic cylinders normally characterize with failure mechanism wear and tear.Since the minimum working pressure increases with the number of working cycles,the minimum working pressure is chosen as degradation signal.PACE model is fundamentally composed of two operations：path classification and remaining useful life（RUL） estimation.Path classification is to classify a current degradation path as belonging to one or more of previously collected exemplary degradation paths.RUL estimation is to use the resulting memberships to estimate the remaining useful life.In order for verification and validation of PACE prognostic method,six pneumatic cylinders are tested.The test data is analyzed by PACE prognostics.It is found that the PACE based prognosis method has higher prediction accuracy and smaller variance and PACE model is significantly outperform population based prognostics especially for small specimen condition.PACE model based method solved the problem of prediction accuracy for small specimen pneumatic cylinders＇ prognosis.

TYRE DYNAMICS MODELLING OF VEHICLE BASED ON SUPPORT VECTOR MACHINES

Various methods of tyre modelling are implemented from pure theoretical to empirical or semi-empirical models based on experimental results. A new way of representing tyre data obtained from measurements is presented via support vector machines （SVMs）. The feasibility of applying SVMs to steady-state tyre modelling is investigated by comparison with three-layer backpropagation （BP） neural network at pure slip and combined slip. The results indicate SVMs outperform the BP neural network in modelling the tyre characteristics with better generalization performance. The SVMsqyre is implemented in 8-DOF vehicle model for vehicle dynamics simulation by means of the PAC 2002 Magic Formula as reference. The SVMs-tyre can be a competitive and accurate method to model a tyre for vehicle dynamics simuLation.

A LARGE SAMPLE ESTIMATE IN MEDIAN LINEAR REGRESSION MODEL Ⅰ: NONTRUNCATED CASE

This paper uses a grouping-adjusting procedure to the data from a median linear regression model, and estimtes the regression coefficients by the method of weighted least squares. This method simplifies computation and in the meantime, preserves the same asymptotic normal distribution for the estimator, as in the ordinary minimum L_1-norm estimates.

Comparison of stem taper models for the four tropical tree species in Mount Makiling, Philippines

This study was conducted to evaluate the performance of six stem taper models on four tropical tree species, namely Celtis luzonica(Magabuyo),Diplodiscus paniculatus(Balobo), Parashorea malaanonan(Bagtikan), and Swietenia macrophylla(Mahogany) in Mount Makiling Forest Reserve(MMFR), Philippines using fit statistics and lack-of-fit statistics. Four statistical criteria were used in this study, including the standard error of estimate(SEE),coefficient of determination(R^2), mean bias( E),and absolute mean difference(AMD). For the lack-offit statistics, SEE, E and AMD were determined in different relative height classes. The results indicated that the Kozak02 stem taper model offered the best fit for the four tropical species in most statistics. The Kozak02 model also consistently provided the best performance in the lack-of-fit statistics with the best SEE, E and AMD in most of the relative height classes. These stem taper equations could help forest managers and researchers better estimate the diameter of the outside bark with any given height,merchantable stem volumes and total stem volumes of standing trees belonging to the four species of thetropical forest in MMFR.

A Cost-benefit Measuring Model of Green Products in Manufacturing Industry

The paper builds up a cost-benefit measuring model of green products in manufacturing industry throughout its full life cycle, which can quantify green products＇ cost and benefit completely and correctly under the circumstance of satisfying enterprise, customer, environment and society. It also puts forth an operable method to estimate social benefit by opportunity cost and establishes a profit maximization-programming model. The model can be applied to justify whether some kinds of green products should be developed and produced.

Fault detection and identification based on combining logic and model in a wall-climbing robot

A combined logic- and model-based approach to fault detection and identification （FDI） in a suction foot control system of a wall-climbing robot is presented in this paper. For the control system, some fault models are derived by kinematics analysis. Moreover, the logic relations of the system states are known in advance. First, a fault tree is used to analyze the system by evaluating the basic events （elementary causes）, which can lead to a root event （a particular fault）. Then, a multiple-model adaptive estimation algorithm is used to detect and identify the model-known faults. Finally, based on the system states of the robot and the results of the estimation, the model-unknown faults are also identified using logical reasoning. Experiments show that the proposed approach based on the combination of logical reasoning and model estimating is efficient in the FDI of the robot.

PARAMETER ESTIMATION OF MULTI-CONSTITUENT WATER QUALITY MODEL FOR THE LIANGXI RIVER BY MARQUARDT METHOD

A multi-constituent water quality model is presented,Which relates carbonaceous biochemical oxygen demand (CBOD),amonia (NH3-N), nitrite(NO2-N), nitrate(NO3-N) and dissolvedoxygen(DO). The parameters are solved by Marquardt Method (i. e.,Dampled Least Square Method) while initial values inoptimization are produced by Monte-Carlo Method. The Potential ofthe method as a parameter estimation aid is demonstrated for theapplication to the Liangyi Rver, JiangSu Province of China and by aspecial comparison with Gauss Method.

Model Reduction by Generalized Falk Method for Efficient Dedicated to Professor Karl Stark Pister for his 95th birthday Field-Circuit Simulations

The Generalized Falk Method(GFM)for coordinate transformation,together with two model-reduction strategies based on this method,are presented for efficient coupled field-circuit simulations.Each model-reduction strategy is based on a decision to retain specific linearly-independent vectors,called trial vectors,to construct a vector basis for coordinate transformation.The reduced-order models are guaranteed to be stable and passive since the GFM is a congruence transformation of originally symmetric positive definite systems.We also show that,unlike the Pade-via-Lanczos(PVL)method,the GFM does not generate unstable positive poles while reducing the order´of circuit problems.Further,the proposed GFM is also faster when compared to methods of the type Lanczos(or Krylov)that are already widely used in circuit simulations for electrothermal and electromagnetic problems.The concept of response participation factors is introduced for the selection of the trial vectors in the proposed model-reduction methods.Further,we present methods to develop simple equivalent circuit networks for the field component of the overall field-circuit system.The implementation of these equivalent circuit networks in circuit simulators is discussed.With the proposed model-reduction strategies,significant improvement on the efficiency of the generalized Falk method is illustrated for coupled field-circuit problems.

Crosstalk Model and Estimation Formula for VLSI Interconnect Wires

We develop an interconnect crosstalk estimation model on the assumption of linearity for CMOS device. First, we analyze the terminal response of RC model on the worst condition from theS field to the time domain. The exact 3 order coefficients inS field are obtained due to the interconnect tree model. Based on this, a crosstalk peak estimation formula is presented. Unlike other crosstalk equations in the literature, this formula is only used coupled capacitance and grand capacitance as parameter. Experimental results show that, compared with the SPICE results, the estimation formulae are simple and accurate. So the model is expected to be used in such fields as layout-driven logic and high level synthesis, performance-driven floorplanning and interconnect planning.