Study of enzyme biosensor based on carbon nanotubes modified electrode for detection of pesticides residue

The paper describes a controllable layer-by-layer （LBL） self-assembly modification technique of multi-walled carbon nanotubes （MWNTs） and poly（diallyldimethylammonium chloride） （PDDA） towards glassy carbon electrode （GCE）, Acetylcholinesterase （ACHE） was immobilized directly to the modified GCE by LBL self-assembly method, the activity value of AChE was detected by using i-t technique based on the modified Ellman method. Then the composition of carbaryl were detected by the enzyme electrode with 0.01U activity value and the detection limit of carbaryl is 10^- 12 g L ^-1 so the enzyme biosensor showed good properties for pesticides residue detection.

Study of the electrochemical properties of a transition metallic ions modified electrode in acidic VOSO_4 solution

Graphite material was used as the electrode for an all-vanadium redox flow battery, and the electrode was modified by transition metallic ions to enhance its electrochemical behavior. An porous graphite composite electrode has high specific surface area and high current density. The electrode modified by transition metallic ions has improved catalysis behavior that can catalyze the V（Ⅱ）-V（Ⅴ） redox reaction showed by cyclic voltammograms. This article studied the impedance of the modified electrode by electrochemical impedance spectroscopy （EIS）, and approved that the electrode modified by Co^2＋ and Mn^2＋ has a lower charge transfer resistance than the non-modified electrode. The effect of average particle size distribution is at lower frequencies that the slope of Warburg impedance is reduced by large particle size distribution. The voltage efficiency of the Co^2＋ modified electrode test cell is 81.5%, which is higher than that of the non-modified electrode.

A selective voltammetric detection for dopamine using poly(gallic acid) film modified electrode

The electrochemistry behavior of dopamine was investigated by cyclic voltammetry and differential pulse voltammetry at a poly (gallic acid) film modified glassy carbon electrode.Two electrons and two protons participated in the diffusion-controlled electrocatalytic oxidation of dopamine with a diffusion coefficient of 2.186×10^(-5) cm^2/s.The interference of ascorbic acid with the determination of dopamine could be efficiently eliminated.This work provided a simple approach to selectively and sensitively de...

Electrochemical Studies of Pirarubicin and Its Interaction with DNA at a Co/GC Ion Implantation Modified Electrode

The electrochemical behavior of pirarubicin(THP) and its interaction with DNA at a Co/GC modified electrode was studied by linear sweep and cyclic voltammetries. In a 0.01 mol/L B-R buffer solution(pH=7.0), the reaction of DNA with THP formed an electrochemical nonactive complex, resulting in a decrease in the THP equilibrium concentration and its reduction current. The composition of the complex was THP∶DNA=2∶1. The combining constant is 2.73×10 10 . The electrode reaction rate constant k s and the electron transfer coefficient α are 1.32 s -1 and 0.56, respectively. The decrease in the peak current was proportional to the DNA concentration and was used to determine the DNA concentration. The experiment of XPS showed that Co was surely implanted into the surface of GCE(glassy carbon electrode) and the implanted Co at GCE can improve the electrocatalytic activity.

Determination of 6-Mercaptopurine in Rat Blood by Microdialysis Coupled with High Performance Liquid Chromatography on a Functionalized Multi-wall Carbon Nanotubes Modified Electrode

A new chemically modified electrode(CME) immobilized on the surface of multi-wall carbon nanotubes functionalized with carboxylic groups was fabricated. The results indicate that the CME exhibits efficiently electrocatalytic oxidation of 6-mercaptopurine(6-MP). The CME can be used as the working electrode in the liquid chromatography for the determination of 6-MP. The peak current of 6-MP is linearly changed with its concentration ranging from 4.0×10 -7 to 1.0×10 -4 mol/L with the calculated detection limit (S/N=3) of 2.0×10 -7 mol/L. Coupled with microdialysis sampling, the method has been successfully applied to assessing the content of 6-MP in rat blood.

Fe_3O_4 Magnetic Nanoparticles Modified Electrode as a Sensor for Determination of Nimesulide

A novel type of Fe3O4 nanoparticles modified glass carbon electrode（Fe3O4/GCE） was constructed and the electrochemical properties of N-（4-nitro-2-phenoxyphenyl）methanesulfonamide（nimesulide） were studied on the Fe3O4/GCE.In 0.4mol/L HAc-NaAc buffer solution（pH=5.0）,the electrode process of nimesulide was irreversible at bare GCE and Fe3O4/GCE.The Fe3O4/GCE exhibited a remarkable catalytic and enhancement effect on the reduction of nimesulide.The reduction peak potential of nimesulide shifted positively from-0.683 V at bare GCE to-0.625 V at Fe3O4/GCE,and the sensitivity was increased by ca.3 times.Some experimental conditions were optimized.The linear range between the peak current and the concentration of nimesulide was 2.6×10-6 ＂1.0×10-4mol/L（R=0.993） with a detection limit of 1.3×10-7mol/L.This method has been used to determine the content of nimesulide in medical tablets.The recovery was determined to be 96.9% ＂101.9% by means of standard addition method.The method is comparable to UV-Vis spectrometry.

Studies on the Voltammetric Behavior of Nicardipine Hydrochloride and its Voltammetric Determination at the Co/GC Modified Electrode

ＩｎｔｒｏｄｕｃｔｉｏｎＴｈｅｔｅｃｈｎｉｑｕｅｏｆｉｏｎｉｍｐｌａｎｔａｔｉｏｎｈａｓｂｅｅｎｄｅｖｅｌｏｐｅｄａｓａｍｅａｎｓｏｆｉｎｔｒｏｄｕｃｔｉｎｇｆｏｒｅｉｇｎａｔｏｍｓｉｎｔｏｔｈｅｓｕｒｆａｃｅｌａｙｅｒｓｏｆａｓｏｌｉｄ．Ｔｈｉｓｔ...

Electrocatalytic Determination of Dopamine in the Presence of Ascorbic Acid by Poly-L-proline and Ferricyanide Compound Film Modified Electrode

A novel biosensor was fabricated by the electrochemical polymerization of poly-L-proline（P-LP） and ferricyanide（FC） to form a compound film on a glassy carbon electrode（GCE）. The compound film modified electrode（P-LP/FC/GCE） shows electrocatalytic activity toward dopamine（DA） in a phosphate buffer solution（PBS, pH = 4.0） with a diminution of the overpotential and an increase in peak current. P-LP/FC/GCE was used to study the electrocatalytic oxidation of DA and ascorbic acid（AA） by means of cyclic voltammetry（CV）, differential pulse voltammetry（DPV） and amperometric i-t curve techniques. The overlapping anodic peaks of DA and AA were resolved into two well-defined voltammetric peaks in CV and DPV with the potential differences of about 200 and 225 mV, respectively. The peak current of DA is linearly change with the concentration of DA in a range of 1 × 10^-7 to 1.14 × 10^-4 mol/L with the correlation coefficient of 0.9997. The detection limit is 4.4~10-8 mol/L（S/N=3）. P-LP/FC/GCE exhibited an excellent selectivity, sensibility and stability for the determination of DA, and can be applied to the determination of dopamine injections with satisfied results.

Indirect Differential Pulse Voltammetric Determination of Aluminum by a Pyrocatechol Violet-Modified Electrode

A PCV-modified electrode was simply prepared by dip-coating a pyrolytic graphite electrode in a NaAc-HAc buffer solution of PCV. The peak currents of differential pulse voltammograms (DPV) decrease with the addition of Al and the peak potentials remain the same. The decreasing of Delta i(p) is linear with Al concentration in the range of 1 x 10(-8) similar to 1 x 10(-7) mol/L. The detection limit is 5 x 10(-9) mol/L and the relative standard deviation for 4 x 10(-8) mol/L Al is 2.9% (n=8). No serious interference was found. The determination of Al in water samples is reported.

Electroredox Behavior of Novel Poly viol ogens Modified Electrodes

The electroredox behavior of novel modified electrodes coated with complexes of different polyviologens was investigated using cyclic voltammetry. The influences of compositions of electrolyte complex on the reversibility of the modified electrode and the electrochromic properties were studied also. It was found that all the ratios of integrated charges of cathodic to anodic scan (Qc/QA) are close to 1, which indicates that these modified electrodes have good reversible behavior. Repeated stepping over the first wave for 500 scans, the PSS-PX(p)V modified electrode showed excellent stability. The first reduction potential (E1), decrease of current height (Dec%), response time (tre tox) of various polyviologen modified electrodes were reported. In addition, the effect of the coverage of polyviologen on the electrode surface was also examined. The rate of electron transfer in this heterogeneous system is diffusion-controlled, consistent with the Conttrell equation.

Sensitive voltammetric determination of xanthinol nicotinate at a carbon nanotubes-ionic liquid gel modified electrode

The electrochemistry of xanthinol nicotinate （Xan） was studied by cyclic voltammetry at a glassy carbon electrode modified by a gel containing multi-walled carbon nanotubes （MWNTs） and room-temperature ionic liquid of 1-butyl-3-methylimidazolium hexafluorophosphate （BMIMPF6）. The modified electrode exhibited good promotion to the electrochemical oxidation of Xan and an ultrasensitive electrochemical method was proposed for the determination of Xan. This method was successfully applied to the determination of Xan in Xan tablets. C 2009 XiaoYu Bao. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

Microperoxidase-11 Modified Electrode and Its Electrocatalytic Activity on the Reduction of O_2 and H_2O_2

Microperoxidase 11(MP 11) was immobilized on the surface of a silanized glass carbon electrode by means of the covalent bond with glutaraldehyde. The measurements of cyclic voltammetry demonstrated that the formal redox potential of immobilized MP 11 was -170 mV, which is significantly more positive than that of MP 11 in a solution or immobilized on the surface of electrodes prepared with other methods. This MP 11 modified electrode showed a good electrocatalytic activity and stability for the reduction of oxygen and hydrogen peroxide.

EASTMAN-AQ/Ni(II)MODIFIED ELECTRODE DETECTION OF CARBOHYDRATES AND AMINO ACIDS

An Eastman-AQ/Ni(II)chemically modified electrode(CME) produced by“double coating steps”deposition of Eastman-AQ/Ni(II) film and Ni(II)-coating crystalline species onto glassy carbon instead of metallic nickel electrode exhibited stable electrocatalytic oxidation of numerous ∝-hydrogen compounds including carbohydrates, amines and amino acids.Determination of glucose in FIA on the CME, the linear response concentration range was bstween 1.0×10^(-5) and 5.0×10^(-2) mol/L and the detection limit was 5.0×10^(-6)mol/L.The stability of the CME was adequate for routine quantitative application.

New Inorganic-organic Hybrid Tetravanadate: Preparation, Characterization and Application in Chemically Modified Electrode

A new inorganic-organic hybrid tetravanadate [Co（2,2＇-bpy）312VaO12·11H2O（1） has been prepared and characterized. X-Ray diffraction study reveals that compound 1 contains classical cluster anions [V4O12]4-, coordinated cations [Co（2,2＇-bpy）3]2＋ and eleven water molecules, in which an interesting decamer water cluster is formed. The hybrid nanoparticles were firstly used as a bulk-modifier to fabricate a chemically modified paste electrode （I-CPE）. The electrochemical behavior and electrocatalysis of 1-CPE have been studied in detail. The results indicate that 1-CPE has a good electrocatalytic activity toward the reduction of bromate in a 0.5 mol/L H2SO4 aqueous solution. 1-CPE shows remarkable stability that be ascribed to the hydrogen bonding interactions between V4O12 cluster and water cluster, which are very important for practical application in electrode modification.

A Novel Method of the Preparation ofChemically Modified Electrodes

ＡＮｏｖｅｌＭｅｔｈｏｄｏｆｔｈｅＰｒｅｐａｒａｔｉｏｎｏｆＣｈｅｍｉｃａｌｌｙＭｏｄｉｆｉｅｄＥｌｅｃｔｒｏｄｅｓＬＩＧｅｎ－ｘｉ，ＬＩＡＯＸｉａｎｇ－ｍｉｎ，ＦＡＮＧＨｕｉ－ｑｕｎａｎｄＣＨＥＮＨｏｎｇ－ｙｕａｎ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍ...

Studies on the Electrochemical Behavior of Bleomycin at a Co/GC Ion Implantation Modified Electrode and Its Application

In a 0. 10 mol/L HAc-NaAc buffer solution (pH = 4. 59), a sensitive reduction peak of bleomycin was observed by linear sweep voltammetry at a Co/GC ion implantation modified electrode. The peak potential was-0. 73 V(iw. SCE). The peak current was proportional to the concentration of bleomycin over the range of 5.0 × 10-8-1.0× 10-6 and 1.0× 10-6-1. 0 × 10-5 mol/L with a detection limit of 2.0 × 10-8 mol/L. The electrochemical behavior of the reduction peak of bleomycin at the Co/GC modified electrode was studied by linear sweep and cyclic voltammetry and applied to the determination of bleomycin in urine. This method is simple, rapid and reliable. The reduction process is quasi-reversible. The experiments of AES and XPS showed that Co was surely implanted into the surface of GCE and the depth distribution of Co was in good agreement with Gooses normal distribution; the implanted Co at GCE improved the electrocatalytic activity.

THE PREPARATION OF ISOPOLYMOLYBDIC ACID-POLYANILINE FILM MODIFIED ELECTRODE AND ITS CATALYTIC EFFECTS ON CHLORATE IONS

The preparation method of H_4MoO_(26)-polyaniline film modified electrode and its voltammetric behaviour are described. The modified electrode has high electrocatalytic activity on chlorate ions.

Electrochemical Behavior of Adriamycin at Ni/GC Ion Implantation Modified Electrode

With a Ni/GC ion implantation modified electrode as working electrode, in 0.1 mol/L HOAc-NaOAc (pH=4.62) solution, a sensitive reductive wave of ADM was obtained by linear sweep voltammetry. The peak potential was -0.55 V (vs.SCE). The peak current is proportional to the concentration of ADM with a detection limit of 6.9 X 10(-8) mol/L. The behavior of the reduction wave was studied. The experiments of AES and XPS showed that Ni was surely implanted into the surface of the GCE and the implanted Ni at the GCE improved the electrocatalytic activity.

Cyclic Voltammetric Responses of Nitrate Reductase on Chemical Modified Electrodes

Electrochemistry of nitrate reductases (NR) incorporated into 2-aminoethanethiol self-assembled on the gold electrode and polyacrylamide cast on the pyrolytic graphite electrode was examined. NR on chemical modified electrode showed electrochemical cyclic voltammetric responses in phosphate buffers.