The irregularity of jointed network poses a challenge to the determination of field mechanical param-eters of columnar jointed rock mass(CJRM),and a reasonable prediction of deformation and strength characteristics of...The irregularity of jointed network poses a challenge to the determination of field mechanical param-eters of columnar jointed rock mass(CJRM),and a reasonable prediction of deformation and strength characteristics of CJRM is important for engineering construction.The Voronoi diagram and three-dimensional printing technology were used to make an irregular columnar jointed mold,and the irregular CJRM(ICJRM)specimens with different dip directions and dip angles were prepared.Uniaxial compression tests were performed,and the anisotropic strength and deformation characteristics of ICJRM were described.The failure modes and mechanisms were revealed in accordance with the final appearances of the ICJRM specimens.Based on the model test results,the empirical correlations for determining the field deformation and strength parameters of CJRM were derived using the dip angle and modified joint factor.The proposed empirical equations were used in the Baihetan Project,and the calculated mechanical parameters were compared with the field test results and those obtained from the tunneling quality index method.Results showed that the deformation parameters determined by the two proposed methods are all consistent with the field test results,and these two methods can also estimate the strength parameters effectively.展开更多
黏弹性Bolt-Kelvin(简称B-K)锚固模型具有较高的计算效率,但由于无法描述岩体进入塑性阶段的力学行为特性,使得该流变模型的采矿工程应用范围受到一定的限制,为此引入修正Mohr-Coulomb(简称M-C)屈服准则对B-K锚固流变模型进行改进。首...黏弹性Bolt-Kelvin(简称B-K)锚固模型具有较高的计算效率,但由于无法描述岩体进入塑性阶段的力学行为特性,使得该流变模型的采矿工程应用范围受到一定的限制,为此引入修正Mohr-Coulomb(简称M-C)屈服准则对B-K锚固流变模型进行改进。首先推导了黏弹塑性BK-MC锚固模型的有限差分增量迭代计算格式;然后基于FLAC3D中UDM接口程序,采用VC++语言编写了相应的计算流程,使用Microsoft Visual Studio 2010编译态链接库DLL进行加载和调用;最后通过单轴压缩试验对开发BK-MC模型进行了数值模拟验证,并应用于口孜东矿深部巷道围岩稳定性预测分析中。结果表明,模拟计算得到的巷道表面位移演化过程与现场实测结果的规律性更趋于一致,进一步验证了新模型的正确性和适用性。研究采矿工程的流变问题时,考虑岩体进入塑性阶段的力学行为特性十分必要。展开更多
Assuming a Winterberg model for space where the vacuum consists of a very stiff two-component superfluid made up of positive and negative mass planckions, Q theory is the hypothesis, that Planck charge, <i>q<...Assuming a Winterberg model for space where the vacuum consists of a very stiff two-component superfluid made up of positive and negative mass planckions, Q theory is the hypothesis, that Planck charge, <i>q<sub>pl</sub></i>, was created at the same time as Planck mass. Moreover, the repulsive force that like-mass planckions experience is, in reality, due to the electrostatic force of repulsion between like charges. These forces also give rise to what appears to be a gravitational force of attraction between two like planckions, but this is an illusion. In reality, gravity is electrostatic in origin if our model is correct. We determine the spring constant associated with planckion masses, and find that, <img src="Edit_770c2a48-039c-4cc9-8f66-406c0cfc565c.png" width="90" height="15" alt="" />, where <i>ζ</i>(3) equals Apery’s constant, 1.202 …, and, <i>n</i><sub>+</sub>(0)=<i>n</i>_(0), is the relaxed, <i>i.e.</i>, <img src="Edit_813d5a6f-b79a-49ba-bdf7-5042541b58a0.png" width="25" height="12" alt="" />, number density of the positive and negative mass planckions. In the present epoch, we estimate that, <i>n</i><sub>+</sub>(0) equals, 7.848E54 m<sup>-3</sup>, and the relaxed distance of separation between nearest neighbor positive, or negative, planckion pairs is, <i>l</i><sub>+</sub>(0)=<i>l</i><sub>_</sub>(0)=5.032E-19 meters. These values were determined using box quantization for the positive and negative mass planckions, and considering transitions between energy states, much like as in the hydrogen atom. For the cosmos as a whole, given a net smeared macroscopic gravitational field of, <img src="Edit_efc8003d-5297-4345-adac-4ac95536934d.png" width="80" height="15" alt="" />, due to all the ordinary, and bound, matter contained within the observable universe, an average displacement from equilibrium for the planckion masses is a mere 7.566E-48 meters, within the vacuum made up of these particles. On the surface of the earth, where, <i>g</i>=9.81m/s<sup>2</sup>, the displacement amounts to, 7.824E-38 meters. All of these displacements are due to increased gravitational pressure within the vacuum, which in turn is caused by applied gravitational fields. The gravitational potential is also derived and directly related to gravitational pressure.展开更多
To optimize the energy capture from the wind,wind turbine(WT)should operate at variable speed.Based on the wind speed,the operating regions of the WT are divided into two parts:below and above the rated wind speed.The...To optimize the energy capture from the wind,wind turbine(WT)should operate at variable speed.Based on the wind speed,the operating regions of the WT are divided into two parts:below and above the rated wind speed.The main aim at below rated wind speed is to maximize the energy capture from the wind with reduced oscillation on the drive train.At above rated wind speed,the aim is to maintain the rated power by using pitch control.This paper presents the control of WT at below rated wind speed by using backstepping sliding mode control(BSMC).In BSMC,generator torque is considered as the control input that depends on the optimal rotor speed.Usually,this optimal rotor speed is derived from effective wind speed.In this paper,effective wind speed is estimated from aerodynamic torque and rotor speed by using the modified Newton Rapshon(MNR)algorithm.Initially,a conventional sliding mode controller(SMC)is applied to the WT,but the performance of the controller was found to be less robust with respect to disturbances.Generally,WT external disturbance is not predictable.To overcome the above drawback,BSMC is proposed and both the controllers are tested with mathematical model and finally validated with the fatigue,aerodynamics,structures,and turbulence(FAST)WT simulator in the presence of disturbances.From the results,it is concluded that the proposed BSMC is more robust than conventional SMC in the presence of disturbances.展开更多
基金This work was supported by the Fundamental Research Funds for the Central Universities,the Postgraduate Research&Practice Innovation Program of Jiangsu Province(Grant No.KYCX21_0487)the National Natural Science Foundation of China(Grant Nos.41831278,and 51579081).
文摘The irregularity of jointed network poses a challenge to the determination of field mechanical param-eters of columnar jointed rock mass(CJRM),and a reasonable prediction of deformation and strength characteristics of CJRM is important for engineering construction.The Voronoi diagram and three-dimensional printing technology were used to make an irregular columnar jointed mold,and the irregular CJRM(ICJRM)specimens with different dip directions and dip angles were prepared.Uniaxial compression tests were performed,and the anisotropic strength and deformation characteristics of ICJRM were described.The failure modes and mechanisms were revealed in accordance with the final appearances of the ICJRM specimens.Based on the model test results,the empirical correlations for determining the field deformation and strength parameters of CJRM were derived using the dip angle and modified joint factor.The proposed empirical equations were used in the Baihetan Project,and the calculated mechanical parameters were compared with the field test results and those obtained from the tunneling quality index method.Results showed that the deformation parameters determined by the two proposed methods are all consistent with the field test results,and these two methods can also estimate the strength parameters effectively.
文摘黏弹性Bolt-Kelvin(简称B-K)锚固模型具有较高的计算效率,但由于无法描述岩体进入塑性阶段的力学行为特性,使得该流变模型的采矿工程应用范围受到一定的限制,为此引入修正Mohr-Coulomb(简称M-C)屈服准则对B-K锚固流变模型进行改进。首先推导了黏弹塑性BK-MC锚固模型的有限差分增量迭代计算格式;然后基于FLAC3D中UDM接口程序,采用VC++语言编写了相应的计算流程,使用Microsoft Visual Studio 2010编译态链接库DLL进行加载和调用;最后通过单轴压缩试验对开发BK-MC模型进行了数值模拟验证,并应用于口孜东矿深部巷道围岩稳定性预测分析中。结果表明,模拟计算得到的巷道表面位移演化过程与现场实测结果的规律性更趋于一致,进一步验证了新模型的正确性和适用性。研究采矿工程的流变问题时,考虑岩体进入塑性阶段的力学行为特性十分必要。
文摘Assuming a Winterberg model for space where the vacuum consists of a very stiff two-component superfluid made up of positive and negative mass planckions, Q theory is the hypothesis, that Planck charge, <i>q<sub>pl</sub></i>, was created at the same time as Planck mass. Moreover, the repulsive force that like-mass planckions experience is, in reality, due to the electrostatic force of repulsion between like charges. These forces also give rise to what appears to be a gravitational force of attraction between two like planckions, but this is an illusion. In reality, gravity is electrostatic in origin if our model is correct. We determine the spring constant associated with planckion masses, and find that, <img src="Edit_770c2a48-039c-4cc9-8f66-406c0cfc565c.png" width="90" height="15" alt="" />, where <i>ζ</i>(3) equals Apery’s constant, 1.202 …, and, <i>n</i><sub>+</sub>(0)=<i>n</i>_(0), is the relaxed, <i>i.e.</i>, <img src="Edit_813d5a6f-b79a-49ba-bdf7-5042541b58a0.png" width="25" height="12" alt="" />, number density of the positive and negative mass planckions. In the present epoch, we estimate that, <i>n</i><sub>+</sub>(0) equals, 7.848E54 m<sup>-3</sup>, and the relaxed distance of separation between nearest neighbor positive, or negative, planckion pairs is, <i>l</i><sub>+</sub>(0)=<i>l</i><sub>_</sub>(0)=5.032E-19 meters. These values were determined using box quantization for the positive and negative mass planckions, and considering transitions between energy states, much like as in the hydrogen atom. For the cosmos as a whole, given a net smeared macroscopic gravitational field of, <img src="Edit_efc8003d-5297-4345-adac-4ac95536934d.png" width="80" height="15" alt="" />, due to all the ordinary, and bound, matter contained within the observable universe, an average displacement from equilibrium for the planckion masses is a mere 7.566E-48 meters, within the vacuum made up of these particles. On the surface of the earth, where, <i>g</i>=9.81m/s<sup>2</sup>, the displacement amounts to, 7.824E-38 meters. All of these displacements are due to increased gravitational pressure within the vacuum, which in turn is caused by applied gravitational fields. The gravitational potential is also derived and directly related to gravitational pressure.
文摘To optimize the energy capture from the wind,wind turbine(WT)should operate at variable speed.Based on the wind speed,the operating regions of the WT are divided into two parts:below and above the rated wind speed.The main aim at below rated wind speed is to maximize the energy capture from the wind with reduced oscillation on the drive train.At above rated wind speed,the aim is to maintain the rated power by using pitch control.This paper presents the control of WT at below rated wind speed by using backstepping sliding mode control(BSMC).In BSMC,generator torque is considered as the control input that depends on the optimal rotor speed.Usually,this optimal rotor speed is derived from effective wind speed.In this paper,effective wind speed is estimated from aerodynamic torque and rotor speed by using the modified Newton Rapshon(MNR)algorithm.Initially,a conventional sliding mode controller(SMC)is applied to the WT,but the performance of the controller was found to be less robust with respect to disturbances.Generally,WT external disturbance is not predictable.To overcome the above drawback,BSMC is proposed and both the controllers are tested with mathematical model and finally validated with the fatigue,aerodynamics,structures,and turbulence(FAST)WT simulator in the presence of disturbances.From the results,it is concluded that the proposed BSMC is more robust than conventional SMC in the presence of disturbances.
