The Impacts of Supplemental Irrigation Based on Soil Moisture Measurement and Nitrogen Use on Winter Wheat Yield and Nitrogen Absorption and Distribution

Based on split plot design method of field test,the impacts of supplemental irrigation based on soil moisture measurement and nitrogen use on winter wheat yield and nitrogen absorption and distribution were studied.Supplemental irrigation had three levels: 60%(W_1),70%(W_2) and 80%(W3) of the targeted relative water content at 0-40 cm of soil layer during jointing period of winter wheat.Nitrogen fertilization had three levels: not using nitrogen(N_0),using pure nitrogen of 195 kg/hm^2(N_(195)) and 255 kg/hm^2(N_(255)).Results showed that:(i)different supplemental irrigation and nitrogen fertilization significantly affected plant height and leaf area of winter wheat during key growth period.Under the same supplemental irrigation treatment,both plant height and leaf area of winter wheat showed as N_(255)> N_(195)> N_0(P <0.05).Plant height in N_(195) and N_(255)treatments was significantly higher than that in N_0 treatment,but there was not significant difference between N_(195) and N_(255)(P >0.05).Under the same nitrogen fertilization,plant height in W_2(569.4 m^3/hm^2) and W3(873.45 m^3/hm^2) treatments was significant higher than that in W_1(265.2 m^3/hm^2),but there was not significant difference between W_2 and W3(P >0.05).It illustrated that excessive nitrogen fertilization and supplemental irrigation did not significantly affect plant height and leaf area of winter wheat.(ii) Under the same nitrogen fertilization level,yield increase effect of winter wheat by supplemental irrigation showed a declining trend with nitrogen application amount increased.It illustrated that nitrogen fertilization and supplemental irrigation had certain critical values on the yield of winter wheat.When surpassing the critical value,the yield declined.When nitrogen fertilization amount was 195 kg/hm^2,and supplemental irrigation amount was 70% of field moisture capacity(569.4 m^3/hm^2),the highest yield 8500 kg/hm^2 could be obtained.(iii) During mature period of winter wheat,nitrogen accumulation amount of plant treated by nitrogen was significantly higher than that not treated by nitrogen(P <0.05).But under the treatments of W_2 and W3,nitrogen accumulation amount in N_(255) significantly declined when compared with N_(195)(P <0.05).Especially under W3(873.45 m^3/hm^2) level,nitrogen accumulation amount in N_(255) was even lower than N_0.Under the treatments of N_0 and N_(195),nitrogen accumulation amount of plant significantly increased with supplemental irrigation increased(P < 0.05).But under N_(255) treatment,there was not significant difference(P > 0.05).It illustrated that moderate supplemental irrigation and nitrogen fertilization could improve nitrogen absorption ability of winter wheat,but excessive supplemental irrigation and nitrogen fertilization were not favorable for plant's nitrogen absorption.(iv) Although the increase of supplemental irrigation during jointing period improved nitrogen absorption ability of winter wheat and promoted winter wheat absorbing more nitrogen,it inhibited nitrogen transferring and distributing to seed.Comprehensively considering growth condition of winter wheat and nitrogen risk condition,it is suggested that nitrogen application amount was 195 kg/hm^2,and supplemental irrigation reached 70% of field moisture capacity(569.4 m^3/hm^2),which could be as the suitable water and fertilizer use amounts in the region.

Moisture Absorption and Desorption in an Ionomer-Based Encapsulant:A Type of Self-Breathing Encapsulant for CIGS Thin-Film PV Modules

As an alternative to conventional encapsulation concepts for a double glass photovoltaic(PV)module,we introduce an innovative ionomer-based multi-layer encapsulant,by which the application of additional edge sealing to prevent moisture penetration is not required.The spontaneous moisture absorption and desorption of this encapsulant and its raw materials,poly(ethylene-co-acrylic acid)and an ionomer,are analyzed under different climatic conditions in this work.The relative air humidity is thermodynamically the driving force for these inverse processes and determines the corresponding equilibrium moisture content(EMC).Higher air humidity results in a larger EMC.The homogenization of the absorbed water molecules is a diffusion-controlled process,in which temperature plays a dominant role.Nevertheless,the diffusion coefficient at a higher temperature is still relatively low.Hence,under normal climatic conditions for the application of PV modules,we believe that the investigated ionomer-based encapsulant can“breathe”the humidity:During the day,when there is higher relative humidity,it“inhales”(absorbs)moisture and restrains it within the outer edge of the module;then at night,when there is a lower relative humidity,it“exhales”(desorbs)the moisture.In this way,the encapsulant protects the cell from moisture ingress.

Water Absorption Capcapability and Moisture Content Seasonal Changing of Salt-Crust in Lop Nur Dry Lake

The Lop Nur dry salt lake,Xinjiang province,is charactered by typical physiognomy salt-crust,located in39.6-41.3N.latitude and 89.6-91.4E.longitude.The thickness of salt-crust is about from 20 cm to 100 cm,and

Moisture Absorption, Mass Loss and Evaporative Resistance of Clothing in Transient Condition

The water vapour resistance of clothing ensembles is not as commonly determined as dry thermal insulation. The measurement techniques are more complicated and the measurement values differ among laboratories. Due to complicated moisture transfer process through clothing ensemble, the moisture absorbed and evaporated varies in transient and steady state phases depending on properties, thickness of clothing, and environmental conditions. The purpose of this study was to measure moisture gain inside hygroscopic underwear, and hydrophobic and permeable outer wear as a function of time, to investigate mass loss from ＂skin＂ as well as from the manikin, to quantify evaporative heat loss and total heat loss from the manikin, and to determine water vaponr resistance of clothing. Manikin Tore was used by wearing wet ＂skin＂ to simulate sweating condition. Moisture content in the inner garment gain shows an exponential relation against time. Moisture in the outer permeable layer shows little gain. On the contrary, mass loss directly from the wet skin decreases exponentially. The mass loss from the manikin is relatively stable throughout three test phases. The evaporative heat loss is about 2/3 of the total heat loss from the sweating manikin. While measuring the evaporative resistance of clothing ensembles with hygroscopic inner garment and permeable outer garment, unlike to measure ensembles with impermeable outer layer, one hour measurement time is enough to get relatively stable results. The variation between the 1^rt hour and the 3^nd hour is less than 5%. The length of transient period and measurement time is dependent on the permeability, thickness of clothing ensembles and environmental conditions.

Analysis of the Porosity Changing after Moisture Absorption in Functional Knitted Fabrics

The paper analyses the effect of stitch geometrical modality changing after moisture absorption on the porosity of knitted fabrics,and educes the formulas between porosity and stitch parameters.Regarding as the cell stitch,the increasing of yarn diameter brings the porosity decreasing and the fabric shrinking in the wale direction.While the diameter keeps invariability,the yarn elongating brings the fabric humping up as well as the increasing porosity.The air-permeability experiments have been conducted to validate the theoretical analysis,and there is reasonable agreement between the theories and experiments.

An Anionic Polymer Incorporating Low Amounts of Hydrophobic Residues Is a Multifunctional Surfactant. Part 1: Emulsifying, Thickening,Moisture-Absorption and Moisture-Retention Abilities of a FattyAcid-Containing Anionic Polysaccharide

We have been studying the function and structure of fatty acid-containing extracellular polysaccharides (FACEPS) produced by bacteria belonging to the genus Rhodococcus. In this study, we examined the relationships between the structure and emulsifying, thickening, moisture-absorption, and moisture-retention capabilities of rhodococcal FACEPS using S-2 EPS produced by R. rhodochrous strain S-2. We prepared chemically deacylated S-2 EPS (DeAcyl S-2 EPS) and palmitoylated DeAcyl S-2 EPS (ReAcyl S-2 EPS), and compared them with native S-2 EPS. All of the properties were attenuated and recovered by deacylation and reacylation of S-2 EPS, respectively. These results suggest that the fatty acid moiety of rhodococcal FACEPS is involved in such functional properties. We also showed that palmitoylation improved the emulsifying, moisture-ab-sorption, and moisture-retention abilities of other acidic polysaccharides that are commercially available. These results suggest that the acidity of the polysaccharide backbone is at least partly responsible for the observed functionality of fatty acid-containing polysaccharides. To our knowledge, this is the first report on multifunctional property of an anionic polymer incorporating low amounts of hydrophobic residues. The present findings could be useful for the creation of new multifunctional surfactants from renewable raw materials for use in various industries, e.g., in cosmetics.

An Anionic Polymer Incorporating Low Amounts of Hydrophobic Residues Is a Multifunctional Surfactant. Part 2: Emulsification, Moisture Absorption, and Moisture Retention of Alkyl Esterified Poly-γ-Glutamic Acid

In the accompanying paper (Part 1), we showed that the fatty acid moiety and the acidity of the polysaccharide-backbone of a fatty acid-containing polysaccharide might be involved in its emul-sification, moisture absorption, and moisture retention abilities. In this study, we synthesized alkyl esterified poly-γ-glutamic acid (PGA) with various chain lengths and degrees of substitution of the alkyl moieties to examine how hydrophobic groups incorporated in the anionic polymer contribute to enhanced emulsification, moisture absorption, and moisture retention. With a low degree of alkylation of PGA, these abilities were drastically improved. To improve the moisture absorption of PGA, alkylation with a short chain length is effective in forming interspaces between PGA chains to trap water molecules. Hydrophobic-hydrophilic balance may also be important to improve the emulsification and moisture retention abilities of PGA alkylates. To the best of our knowledge, this is the first report of the relationship between the structure and the multifunctional abilities of an anionic polymer incorporated with a small amount of hydrophobic residue. PGA alkylates, as well as fatty acid-containing polysaccharides, have potential use as multifunctional surfactants throughout various industries.

Water Transport Models of Moisture Absorption and Sweat Discharge Yarns

An important property of moisture absorption and sweat discharge yarns is their water transport property. In the paper, two water transport models of moisture absorption and sweat discharge yarns were developed to investigate the influence factors on their wicking rate. In parallel Column Pores Model, wicking rate is determined by the equivalent capillary radius R and length of the capillary tube L. In Pellets Accumulation Model, wicking rate is decided by the capillary radius r and length of the fiber unit assemble L0.

Moisture Absorption and Diffusion of a Carbon Composite Structure

Composite materials are lightweight structures and have been wildly used in marine applications.A carbon composite structure usually absorbs moisture while in-service,which can significantly affect its properties,and detriments the overall performance.We perform a detailed study on moisture absorption and diffusion of a carbon fibre reinforced vinyl ester resin composite system.Composite samples are immersed directly in four different solutions at a temperature of 37±0.5℃for 1444h.The moisture diffusion is analysed through the Fickian diffusion model;the diffusion parameters are subsequently determined from the gravimetric data.The moisture absorption and interaction with the composite constituents are then discussed.These indicate the fundamentals of the moisture absorption and diffusion within the carbon composite structure.

Effects of Supplemental Irrigation Based on Testing Soil Moisture and Nitrogen Fertilization Amount on the Yield and Nitrogen Uptake of Winter Wheat

[Objective] This study aimed to determine the effects of supplemental irrigation on yield and nitrogen uptake in winter wheat. [Method] Three supplemental irrigation levels were set based on the target soil contents of 60%, 70% and 80%） at jointing stage of wheat. Moreover, three nitrogen levels （0, 195 and 255 kg/hm^2） were designed. The experimental plots were arranged fol owing a split-plot design. Zhoumai 18 was selected as the experimental material. [Result] Supplemental irrigation and nitrogen application in combination had significant or extremely significant effects on yield, yield components and nitrogen uptake in winter wheat. The interaction between irrigation and nitrogen fertilization had significant or extremely significant influence on the number of ears, number of grains per ear, 1 000-grain weight, grain yield and nitrogen accumulation in winter wheat. Under different combinations of supplemental irrigation and nitrogen application, the maximum yield of winter wheat was obtained at W2 N195, while the minimum at W1 N255. [Conclusion] With the increase of irrigation, negative effect of nitrogen on number of ears, number of grains per ear, 1 000-grain weight, grain yield and nitrogen accumulation decrease under lower nitrogen application rate.

Water Absorption Capacity and Coating Adhesion on Thermally Modified and Not-Modified Spruce Wood(Blue Stained or Free of Blue Stained)

This study aimed to investigate the water absorption capacity of thermally modified and non-modified spruce and blue-stained spruce wood.The wettability of wood depends on various factors,including its type,density,porosity,and surface treatment.Wood can swell and become distorted when exposed to water or humidity,impacting its structural integrity.Hence,it is crucial to consider the water and water vapour uptake in the wood when choosing materials for applications that are likely to be exposed to moisture.Various moisture absorption tests were conducted to assess water absorption capacity,including short-term and long-term water absorption and water vapour absorption.The results showed a significant difference in the long-term exposure to water,which was related to the density of the wood.The study examined the influence of thermal treatment on the physical properties of wood and observed significant variations in mass change due to coating,indicating differences in adhesion among different wood types.Vacuum-treated blue-stained Norway spruce demonstrated higher adhesion(5%–15%)compared to air-treated samples.Furthermore,cohesion tests revealed lower cohesion force in blue-stained Norway spruce(approximately 20%–30%)compared to Norway spruce.The study also used industry-standard tests to investigate the adhesion and cohesion of nano-coatings on wood surfaces.The results provided valuable information on the properties of coatings applied to wood,which is vital in protecting and decorating wood while also providing preventive protection against wood pests,weathering,and mechanical influences.Wood modification in vacuum involves subjecting the wood to a low-pressure environment to remove air and moisture,allowing for deeper and more uniform penetration of treatment chemicals.In contrast,wood modification in air relies on the natural circulation of air to facilitate the absorption of chemical treatments,without the need for a vacuum chamber.

MOISTURE AND FLEXURAL BEHAVIOUR OF HEMP MAT FOAM STRUCTURAL INSULATED PANEL SPECIMENS

The use of structural insulated panels(SIPs)for wall and roof assemblies in residential and commercial buildings is a well-known construction technique.SIPs typically use a combination of either expanded polystyrene foam(EPS)or polyurethane foam(PUR)as the core material.The covering or skin is predominantly oriented strand board(OSB).The OSB is either bonded to the foam with adhesive in the case of EPS,while polyurethane is used to provide adhesion with PUR SIPs.This paper presents the results of research that investigated the use of industrial hemp mat used as a skin for soy-based polyurethane foam panels.A series of tests were conducted to investigate moisture resistance and flexural behaviour on hemp mat foam panels.Moisture absorption behaviour was evaluated on three specimen types:uncoated,earth plaster and tung oil treated hemp mat.The absorption coefficient Aw was determined for all specimens.The tung oil treated specimens exhibited a water absorption coefficient that was 5.3%of that for untreated hemp mat panel specimens.Flexural tests were conducted on dry specimens with earth-plastered hemp mat,tung oil coated hemp mat,OSB and,untreated hemp mat skins.Tung oil provided resistance to tension failure and increased capacity to withstand considerable deformation without tensile failure in flexural specimens.Compared with pure foam specimens,untreated hemp mat improved flexural performance by 16.3%.

Research on various factors influencing the moisture absorption property of sodium polyacrylate

Sodium polyacrylate was synthesized with acrylic acid as the monomer, and sodium bisulfate and ammonium persulfate as the initiator, by means of aqueous solution polymerization. The factors influencing the properties of moisture absorption, such as monomer concentration, dosage of initiator, and reaction temperature were systematically investigated. The experimental results indicate that the moisture-absorbing property of this polymer was better than other traditional material, such as silica gel, and molecular sieve. The best reaction condition and formula are based on the orthogonal experiment design. The optimum moisture absorbency of sodium polyacrylate reaches 1.01 g/g. The mathematical correlation of this polymer with various factors and moisture absorbency is obtained based on the multiple regression analysis. The moisture content intuitive analysis table shows that neutralization degree has the most significant influence on moisture absorbency, followed by monomer concentration and reaction temperature, while other factors have less influence.

Moisture Absorption and Mechanical Properties of Chemically Modified Linen/Polypropylene Composites

To decrease the moisture absorption and improve the mechanical properties of linen/polypropylene（PP） composites, linen was modified with silane N-β-（trimethoxysilyl） propyl]ethylenediamine（AAPTS）, surfactant trimethyloctadecylalmnonium bromide（STAB）, and both AAPTS and STAB, respectively. Fourier transform infrared（FTIR） spectra showed that the linen was successfully modified and alkyl chains were attached through different treatments. The linen and PP were compounded by melt compressing. The moisture absorption of linen was decreased after STAB and AAPTS-STAB modifications. The moisture absorption, mechanical property and thermal property of the composites were also characterized. The results show that the moisture absorption of the AAPTS-modified li- nen（F1） reinforced PP（PPF1） is 8.09%, which is higher than that of the unmodified linen reinforced PP（PPF）（7.89%）. The moisture absorption of the STAB-AAPTS-modified linen（F3） reinforced PP（PPF3） is 6.58%. The tensile strengths of PPF1 and PPF3 are 33.7 and 35.8 MPa, which are improved by 22.5% and 30% compared with that of PPF（27.5 MPa）, respectively. Nevertheless, the moisture absorption of the STAB-modified linen（F2） reinforced PP（PPF2） is decreased by 22.4%, and the tensile strength is improved by 30% compared with those of PPF. Scanning electron microscopy（SEM） analysis of the fractured surface confirms the good interfacial adhesion of PPF2 compared with those of other composites. Furthermore, the 5% mass loss temperatures of the composites are all higher than 290 ℃. Thus, linen modified with STAB is a promising reinforcement for biocomposites.

Theory and practice concerning classification for expansive soils using standard moisture absorption water content

A series of tests on physical, mechanical and chemical properties of expansive soils have shown that the standard moisture absorption water content (SMA) of expansive soils has a good linear relationship with montmorillonite content, cation exchange capacity, specific surface, and it also presents a linear relationship tendency to plastic index and free swell ratio. All this indicates that the above SMA is of clear significance in physics. The plastic index can better reflect the interaction extent between composition and dispersing character of grains, cation and clay minerals. Consequently, SMA can reflect the basic essential properties of expansive soils. On the basis of the classification results that have been published in literature and in consideration of the succession to the classification results for the free swell ratio, this paper puts forward three indexes, i.e. the SMA, plastic index and free swell ratio to classify expansive soils. The tests proposed for the classification indexes are easy to operate, simple in testing device and last a short time. Compared with the latest issued “Classification Standard Code for Rocks and Soils of Railway Projects” (TB10077-2001), the method proposed in this paper is more convenient and reasonable, and can be popularized, when environment conditions ripen, for the application in field of exploration and design of highway in the areas surrounded by expansive soils.

Moisture absorption properties of biomimetic laminated boards made from cross-linking starch/maize stalk fiber

In the research,three kinds composite materials of biomimetic laminated boards made from cross-linking starch/maize stalk fiber-the single layer jute fiber reinforced maize stalk fiber boards,the dual layer jute fiber reinforced maize stalk fiber boards,the jute fiber hybrid reinforced maize stalk fiber boards were obtained according to the formulation of cross-linking maize starch adhesive and the preparation process of composite materials.The hygroscopicity variation of the biomimetic laminated boards made from cross-linking starch/maize stalk fiber was investigated under different relative humidity conditions.The moisture absorption rate and the variation velocity were used as important evaluation indexes to evaluate the moisture absorption properties of the straw fiber composites.The mathematical models of the moisture absorption rate and the variation velocity were established.The hygroscopicity variation curves of three kinds of composite materials were measured under the five different relative humidity conditions.The results showed that the three kinds composites had low moisture absorption rate compared with other stalk fiber composites which were good at water resistance and the waterproof property of the three kinds stalk fibers were excellent under the experimental conditions.The research provides a useful reference to improve the water resistance of fiber composites and a new idea on the development and application of the biodegradable composites,especially the straw fiber reinforced composites.

湿热处理对红薯淀粉特性的影响

为了研究湿热处理对红薯淀粉理化和结构等特性的影响,以五种红薯淀粉为实验对象,测定并分析湿热处理后淀粉溶解度、膨润力、持水力、透光率、凝沉性等理化特性的变化情况,进而探明湿热处理对不同初始含水量红薯淀粉吸水特性及晶体结构的影响规律。结果表明,经湿热处理后红薯淀粉的溶解度、膨润力、凝沉性与透光率均较原淀粉降低,持水力均增强,且五种红薯淀粉均呈现相同趋势,说明红薯品种与湿热处理对淀粉性质的影响规律无显著相关性。经湿热处理后红薯淀粉未见新的衍射特征峰,晶体类型仍为C型,而衍射强度和结晶度降低。湿热处理淀粉吸水达到平衡所需要时间较原淀粉短,且饱和吸水量较原淀粉有减小的趋势。利用Peleg模型方程模拟湿热处理后红薯淀粉的吸水规律,并计算出浸泡动力学吸水常数K1和K2,确定了淀粉的吸水动力学方程,可预测湿热处理后红薯淀粉在浸泡过程中的水分含量。

基于疏水仿生学提升超细高氯酸铵热分解、安全及防吸湿性能的研究

为了研制出兼具高燃速和高安全性能的固体推进剂,以改善高氯酸铵的性能为目标,采用液相沉积法制备了具有核壳结构的超细高氯酸铵@硬脂酸锌(UF-AP@ZnSA)复合物;使用扫描电镜(SEM)、热重-差示扫描量热法(TG-DSC)、傅里叶变换红外光谱(FT-IR)等对样品的形貌、结构和热分解性能进行了表征;并测量了样品的撞击感度、摩擦感度、吸湿率和接触角等参数;采用热分析-红外联用技术分析并解释了硬脂酸锌(ZnSA)催化UF-AP的热分解机理。结果表明,UF-AP表面生成了ZnSA壳层;不同壳层含量的复合物中UF-AP高温分解峰从424.3℃降至370~385℃,相较于原料UF-AP,放热区间更加集中,放热量更大;UF-AP@ZnSA复合物特性落高(H_(50))相较于原料增加了27.6 cm,摩擦感度的爆炸概率减小了76%,安全性能大幅度提升;壳层质量分数为5%的UF-AP@ZnSA复合物72 h的吸湿率为0.05%,较原料UF-AP的吸湿率降低约90%,防吸湿性能得到明显提升。

以Hailwood-Horrobin平衡水分模型分析聚葡萄糖吸潮机理

为解释聚葡萄糖的吸潮性能,改进包装材料,在20~35℃和平衡相对湿度(ERH)10%~90%范围内,测定了初始含水率(IMC)1.01%~4.89%的5个国产样品(a1~a5)的水分吸附与解吸等温线。吸附和解吸等温线均是S型曲线,在ERH小于80%时,解吸等温线与吸附等温线之间存在滞后现象,样品初始含水率越低,滞后现象越显著。由于聚葡萄糖是无定形相态的粉末,我们假定聚葡萄糖水分吸附过程是蒸汽相态、液体相态(多分子层吸附)及固体溶液(单分子层吸附)之间存在的平衡,按照Hailwood-Horrobin(HH)模型把S型吸附等温线去卷积为单分子层(Mh)和多分子层成分(Md),吸附和解吸多分子层水含量随ERH增加呈现S型曲线增加,解吸单分子层含水率随ERH增加保持不变,而吸附单分子层含水率随ERH增加对a1~a4样品(IMC4.87%~2.35%)缓慢增加,对a5样品(IMC 1.01%)几乎线性减少。随着样品初始含水率降低,吸附位点聚合物分子量对a1样品最大,对a5样品最小。尽管红外光谱扫描显示a5样品羟基(3416cm^(–1))和无定形结构官能团(1027cm^(–1))的强度最小,但是a5样品的吸潮率最大。说明不同工艺加工的聚葡萄糖样品含水率越低,吸附单分子层水含量随ERH增加几乎线性减少,但是吸附多分子层含水量随ERH增加是S型增加,吸潮率和吸湿量增大。

完全组织纵行数对棉毛组织擦拭布性能影响

采用涤纶超细纤维长丝纱作为原料,以普通双面针织圆机为编织设备,设计开发完全组织纵行数为4、8、12、16、20个的5种组织结构多段棉毛组织针织擦拭布。同时对这5种织物组织基本参数及悬垂性、吸湿性和耐磨性等进行测试分析,讨论完全组织纵行数对涤纶超细纤维针织擦拭布基本参数以及悬垂性、吸湿性和耐磨性的影响。结果表明,随着完全组织纵行数增加,棉毛组织擦拭布密度减小,且与完全组织纵行数呈线性关系,其克质量也有所减小,而厚度则有所增加。此外,随着完全组织纵行数的增大,多段棉毛组织针织擦拭布悬垂系数呈先减小后增大趋势,而芯吸高度呈先增大后减小趋势,其耐磨性能则随完全组织增大而逐渐降低。