B-COPNA resin formation from ethylene tar light fractions:Process development and mechanical exploration by molecular simulation

An efficient utilization strategy of ethylene tar(ET),the main by-product of the ethylene cracking unit,is urgently required to meet demands for modern petrochemical industry.On the other hand,condensed polynuclear aromatic resin of moderate condensation degree(B-COPNA)is a widely used carbon material due to its superb processability,the production of which is,however,seriously limited by the high cost of raw materials.Under such context,an interesting strategy was proposed in this study for producing B-COPNA resin using crosslinked light fractions of ethylene tar(ETLF,boiling point<260℃)facilitated by molecular simulation.1,4-Benzenedimethanol(PXG)was first selected as the crosslinking agent according to the findings of molecular simulation.The effects of operating conditions,including reactions temperature,crosslinking agent,and catalyst content on the softening point and yield of B-COPNA resin products were then investigated to optimize the process.The reaction mechanism of resin production was studied by analyzing the molecular structure and transition state of ETLF and crosslinking agents.It was shown that PXG exhibited a superior capacity of withdrawing electrons and a higher electrophilic reactivity than other crosslinking agents.In addition to the highest yield and greatest heat properties,PXG-prepared resin contained the most condensed aromatics.The corresponding optimized conditions of resin preparation were 180℃,1:1.9(PXG:ETLF),and 3%(mass)of catalyst content with a resin yield of 78.57%.It was the electrophilic substitution reaction that occurred between the ETLF and crosslinking agent molecules that were responsible for the resin formation,according to the experimental characterization and molecular simulation.Hence,it was confirmed that the proposed strategy and demonstrated process can achieve a clean and high value-added utilization of ETLF via B-COPNA resin preparation,bringing huge economic value to the current petrochemical industry.

Molecular simulation study on the evolution process of hydrate residual structures into hydrate

The clathrate hydrate memory effect is a fascinating phenomenon with potential applications in carbon capture,utilization and storage(CCUS),gas separation,and gas storage as it can accelerate the secondary formation of clathrate hydrate.However,the underlying mechanism of this effect remains unclear.To gain a better understanding of the mechanism,we conducted molecular dynamic simulations to simulate the initial formation and reformation processes of methane hydrate.In this work,we showed the evolution process of hydrate residual structures into hydrate cages.The simulation results indicate that the residual structures are closely related to the existence of hydrate memory effect,and the higher the contribution of hydrate dissociated water to the hydrate nucleation process,the faster the hydrate nucleation.After hydrate dissociation,the locally ordered structures still exist after hydrate dissociation and can promote the formation of cluster structures,thus accelerating hydrate nucleation.Additionally,the nucleation process of hydrate and the formation process of clusters are inseparable.The size of clusters composed of cup-cage structures is critical for hydrate nucleation.The residence time at high temperature after hydrate decomposition will affect the strength of the hydrate memory effect.Our simulation results provide microscopic insights into the occurrence of the hydrate memory effect and shed light on the hydrate reformation process at the molecular scale.

Recent advances in protein conformation sampling by combining machine learning with molecular simulation

The rapid advancement and broad application of machine learning(ML)have driven a groundbreaking revolution in computational biology.One of the most cutting-edge and important applications of ML is its integration with molecular simulations to improve the sampling efficiency of the vast conformational space of large biomolecules.This review focuses on recent studies that utilize ML-based techniques in the exploration of protein conformational landscape.We first highlight the recent development of ML-aided enhanced sampling methods,including heuristic algorithms and neural networks that are designed to refine the selection of reaction coordinates for the construction of bias potential,or facilitate the exploration of the unsampled region of the energy landscape.Further,we review the development of autoencoder based methods that combine molecular simulations and deep learning to expand the search for protein conformations.Lastly,we discuss the cutting-edge methodologies for the one-shot generation of protein conformations with precise Boltzmann weights.Collectively,this review demonstrates the promising potential of machine learning in revolutionizing our insight into the complex conformational ensembles of proteins.

Molecular simulation and experimental investigation of thermal conductivity of flexible graphite film

Flexible graphite film(FGF),as a traditional interface heat dissipation material,has high anisotropy.It is a challenge to enhance both in-plane and through-plane thermal conductivity of FGF.For this reason,the effects of oxygen content,layer spacing,density and particle size on the in-plane and through-plane thermal conductivity of FGF were studied by both molecular simulation and experimental investigation.The simulation results indicate that the ways to improve the thermal conductivity of FGF include reducing oxygen content and layer spacing,increasing the density and matching the size of graphite sheets.The FGF prepared from room temperature exfoliated graphite(RTFGF)has a wide range of adjustable density(1.3–2.0 g/cm^(3))and thickness(50–400μm).The thermal conductivity of the RTFGF is significantly improved after heat treatment owing to reduced oxygen content and layer spacing,which is consistent with the simulation results.Moreover,RTFGF with both high in-plane(518 W·m^(-1)·K^(-1))and through-plane(7.2 W·m^(-1)·K^(-1))thermal conductivity can be obtained by particle size matching of graphite.

Effects of Different Concentrations of Sulfate Ions on Carbonate Crude Oil Desorption:Experimental Analysis and Molecular Simulation

Low salinity water containing sulfate ions can significantly alter the surface wettability of carbonate rocks.Nevertheless,the impact of sulfate concentration on the desorption of oil film on the surface of carbonate rock is still unknown.This study examines the variations in the wettability of the surface of carbonate rocks in solutions containing varying amounts of sodium sulfate and pure water.The problem is addressed in the framework of molecular dynamics simulation(Material Studio software)and experiments.The experiment’s findings demonstrate that sodium sulfate can increase the rate at which oil moisture is turned into water moisture.The final contact angle is smaller than that of pure water.The results of the simulations show that many water molecules travel down the water channel under the influence of several powerful forces,including the electrostatic force,the van der Waals force and hydrogen bond,crowding out the oil molecules on the calcite’s surface and causing the oil film to separate.The relative concentration curve of water and oil molecules indicates that the separation rate of the oil film on the surface of calcite increases with the number of sulfate ions.

Molecular simulation study of the microstructures and properties of pyridinium ionic liquid[HPy][BF_(4)]mixed with acetonitrile

The microstructures and thermodynamic properties of mixed systems comprising pyridinium ionic liquid[HPy][BF_(4)]and acetonitrile at different mole fractions were studied using molecular dynamics simulation in this work.The following properties were determined:density,self-diffusion coefficient,excess molar volume,and radial distribution function.The results show that with an increase in the mole fraction of[HPy][BF_(4)],the self-diffusion coefficient decreases.Additionally,the excess molar volume initially decreases,reaches a minimum,and then increases.The rules of radial distribution functions(RDFs)of characteristic atoms are different.With increasing the mole fraction of[HPy][BF_(4)],the first peak of the RDFs of HA1-F decreases,while that of CT6-CT6 rises at first and then decreases.This indicates that the solvent molecules affect the polar and non-polar regions of[HPy][BF_(4)]differently.

Molecular simulation study of the stabilization process of NEPE propellant

In this reported study, the density functional theory(DFT) was used at the(U)B3LYP/6-311G(d,p) level to investigate the stabilization process of the nitrate ester plasticized polyether propellant(NEPE). Molecular simulations were conducted of the reaction that generates NO_(2), the autocatalytic and aging reaction triggered by the NO_(2), and the nitrogen dioxide absorption reaction of the stabilizers during the propellent stabilization process. These simulations were derived using the transition-state theory(TST)and variational transition-state theory(VTST). The simulation results suggested that the stabilization of the NEPE propellant consisted of three stages. First, heat and NO_(2) were generated during the denitrification reaction of nitroglycerine(NG) and 1,2,4-butanetriol trinitrate(BTTN) in the NEPE propellant.Second, nitroso products were generated by the reactions of N-Methyl-4-nitroaniline(MNA) and 2-nitrodiphenylamine(2NDPA) with NO_(2). Third, the stabilizers were exhausted and the autocatalytic reaction of NG and BTTN and the aging reaction of polyethylene glycol(PEG) were triggered by the heat and NO_(2)generated in the first stage. By comparing the energy barriers of the various reactions, it was found that the NO_(2)generated from the denitrification reaction significantly reduced the reaction energy barrier to 105.56-126.32 kJ/mol, also increased the reaction rate constant, and decreased the thermal stability and energetic properties of the NEPE propellant. In addition, the NO_(2)also weakened the mechanical properties of the NEPE propellant by attacking the-CH2groups and the O atoms in the PEG molecular chain. The energy barriers of the reactions of MNA and 2NDPA with NO_(2)(94.61-133.61 k J/mol) were lower than those of the autocatalytic and decomposition reactions of NG, BTTN, and the aging reactions of PEG(160.30-279.46 kJ/mol). This indicated that, by eliminating NO_(2), the stabilizer in the NEPE propellant can effectively prevent NO_(2)from reacting with the NG, BTTN, and PEG in the NEPE propellant. Consequently, this would help maintain the energy and mechanical properties of the NEPE propellant, thereby improving its thermal stability.

Molecular Simulation of Methane Adsorption in Different Micro Porous Activated Carbons at Different Temperatures

We employed the previously developed micro porous activated carbon models of different pore sizes ranges of 9-11?,10-12?,and 13-16?that were constructed by molecular simulation method based on a random packing of platelets of carbon sheets,functionalized with oxygen containing groups,to study the adsorption behavior of methane molecules.In studying methane adsorption behavior,we used Grand Canonical Monte Carlo and Molecular Dynamics methods at different temperatures of 273.15,298.15 and303.15 K.Adsorption isotherms,isosteric heats of adsorption,adsorption energy distributions and porosity changes of the models during adsorption process were analyzed and discussed.Furthermore,radial distribution Functions,relative distribution and diffusion coefficients of methane molecules in activated carbon models at different temperatures were studied.After the analysis,the main results indicated that large micro pores activated carbons were favorable for storing methane at lower temperatures and small micro pores were the most favorable for adsorbing methane molecules at higher temperatures.Interestingly,the developed model structures showed high capacities to store methane molecule at ambient temperatures and low pressure.

Dissolution behavior,thermodynamic and kinetic analysis of malonamide by experimental measurement and molecular simulation

In this study,the solid structure,dissolution behavior,thermodynamic properties and nucleation kinetics of malonamide were explored.Firstly,the Hirshfeld surface analysis and molecular electrostatic potential surface were plotted to reveal the percentage contribution of various intermolecular contacts and location of the strongest hydrogen bond.Next,the solubility of malonamide in 12 solvents was determined by dynamic method at temperatures from 278.15 K to 318.15 K.Four thermodynamic models were applied to analyze solubility results.In addition,the thermodynamic properties were calculated to further analyze and discuss the dissolution behavior of malonamide.Moreover,the physicochemical properties of solvents were explored to express the solvent effects.The results illustrate“like dissolves like”,“mass transfer”and“solvent–solute interaction”rules play the synergistic effects on the dissolution process.The molecular dynamic simulation,including radial distribution function analysis and solvent free energy,was used to further explain the dissolution behavior.At last,the nucleation rate and effective interfacial energy in methanol solvent was measured and calculated to reveal the nucleation behaviour.

Molecular basis of cross-interactions between Aβ and Tau protofibrils probed by molecular simulations

Amyloid β-protein(Aβ) and Tau, two common pathogenic proteins associated with Alzheimer’s disease(AD), cross-interact, and thus co-assemble into hybrid aggregates. However, molecular mechanism of the cross-interactions remains unclear. To explore the issue, docking and molecular dynamics(MD) simulations were coupled to study the cross-interactions between Aβ pentamer and Tau pentamer. Four stable hybrid decamer conformations including double layer, single layer, block, and part-in were obtained by protein-protein docking software HADDOCK 2.2. Then, MD simulations were used to explore the molecular mechanism of cross-interactions between Aβ pentamer and Tau pentamer. The results of MD simulations showed that the part-in structure was the most stable among all the above four representative ones. The binding energy between Aβ and Tau was about-759.77 kJ·mol-1in the part-in structure. Moreover, the part-in conformation would undergo conformational transition, which would improve its hydrophobicity and make the structure more compact. This work offers a structural understanding of cross-interactions between Aβ and Tau linked to AD.

Molecular Simulations of the Effect of Hydrated Montmorillonite on the Viscosity of Polyacrylamide under Confined Shear

Our researches are based on the fact that the systems composed of polyacrylamide and montmorillonite under a kind of shear state often appear in some important practical processes like drilling well etc. The viscosity of polyacrylamide is usually the most important one among the characteristics to decide if the practical processes succeed or not. Therefore, we studied the effect of hydrated montmorillonite on the viscosities of polyacrylamide with temperature and shear rate varying under confined shear by molecular simulation method. Adopting the condition of confined shear in the research could make our simulations and the practical processes as similar as possible. First, the model of one polyacrylamide polymer chain with 20 monomers linearly linking surrounded by water molecules between two of montmorillonite layers was constructed. Then canonical ensemble （NVT） MD simulations were carried out for the built model at different temperatures and shear rates. From the gained simulation results, we calculated the polymer＇s structural property-radius of gyration, which was directly related to the viscosity property of polyacrylamide polymer. It was found that the viscosity of the polyacrylamide polymer between hydrated clay layers decreased with the temperature increasing from 298 to 343 K under the condition of confined shear. The variation trend of viscosity from simulation results was also confirmed by our experiments. Besides, the viscosity of the polyacrylamide between hydrated clay layers decreased with the shear rate increasing within the range of higher shear rates.

Molecular Simulation of Oxygen Sorption and Diffusion in the Poly （lactic acid）

Grand canonical Monte Carlo and molecular dynamics simulation methods are used to simulate oxygen sorption and diffusion in amorphous poly（lactic acid） （PLA）. The simulated solubility coefficient of oxygen is close to experimental data obtained from the quartz crystal microbalance but much higher than those from the time-lag method. This discrepancy is explained by using the dual-mode sorption model. It is found that oxygen sorotion in PLA is predominantly Langmuir type controlled, i.e., through the process of filling holes. The time--lag method only takes into account oxygen molecules that participate the diffusion process whereas a large proportion of oxygen molecules trapped in the void have little chance to execute hopping due to the glassy nature of PLA at room temperature. The simulated diffusion coefficient of oxygen is reasonably close to the data obtained from the time-lag method. The solubility coefficient of oxygen decreases linearly with increasing relative humidity while its diffusion coefficient firstly decreases and then increases as a function of relative humidity.

Molecular Simulation of CO2/H2 Mixture Separation in Metal-organic Frameworks： Effect of Catenation and Electrostatic Interactions

In this work grand canonical Monte Carlo simulations were performed to study gas separation in three pairs of isoreticular metal-organic frameworks (IRMOFs) with and without catenation at room temperature.Mixture composed of CO2 and H2 was selected as the model system to separate.The results show that CO2 selectivity in catenated MOFs with multi-porous frameworks is much higher than their non-catenated counterparts.The simulations also show that the electrostatic interactions are very important for the selectivity,and the contributions of different electrostatic interactions are different,depending on pore size,pressure and mixture composition.In fact,changing the electrostatic interactions can even qualitatively change the adsorption behavior.A general conclusion is that the electrostatic interactions between adsorbate molecules and the framework atoms play a dominant role at low pressures,and these interactions in catenated MOFs have much more pronounced effects than those in their non-catenated counterparts,while the electrostatic interactions between adsorbate molecules become evident with increasing pressure,and eventually dominant.

Molecular simulations of charged complex fluids: A review

Molecular simulation plays an increasingly important role in studying the properties of complex fluid systems containing charges,such as ions,piezoelectric materials,ionic liquids,ionic surfactants,polyelectrolytes,zwitterionic materials,nucleic acids,proteins,biomembranes and etc.,where the electrostatic interactions are of special significance.Several methods have been available for treating the electrostatic interactions in explicit and implicit solvent models.Accurate and efficient treatment of such interactions has therefore always been one of the most challenging issues in classical molecular dynamics simulations due to their inhomogeneity and long-range characteristics.Currently,two major challenges remain in the application field of electrostatic interactions in molecular simulations;(i)improving the representation of electrostatic interactions while reducing the computational costs in molecular simulations;(ii)revealing the role of electrostatic interactions in regulating the specific properties of complex fluids.In this review,the calculation methods of electrostatic interactions,including basic principles,applicable conditions,advantages and disadvantages are summarized and compared.Subsequently,the specific role of electrostatic interactions in governing the properties and behaviors of different complex fluids is emphasized and explained.Finally,challenges and perspective on the computational study of charged systems are given.

Swelling characteristics of East-Africa black cotton soil based on computer molecular simulation

Black cotton soil in East Africa is not a stable engineering material for highway and railroad projects. Its strong swelling potential when it absorbs water causes distresses in subgrade of highway and railroad, and thus leads to failures of the projects. This paper presents study on the swelling characteristics of black cotton soil in East Africa. Lab tests were conducted to obtain its basic engineering properties, and the results show that black cotton soil contains high amount of montmorillonite and exchangeable cations and is strong expansive soil. Molecular modelling was exploited to further investigate water absorption ability of montmorillonite. Three different molecular models of montmorillonite were constructed and used for simulations, among which Types I and II montmorillonite represent the expansive soil montmorillonite in China, and Types II and III montmorillonite represent black cotton soil montmorillonite in East Africa. The results showed that the interlayer cations of Type III montmorillonite possessed the strongest water absorption ability based on analysis of radial distribution function(RDF) of cations. Interlayer compensatory cations of Na+ enhance the hydration ability of the other major cations, thus resulting in the strong swelling potential of East-Africa black cotton soil.

Adsorption behavior of carbon dioxide and methane in bituminous coal:A molecular simulation study

The adsorption behavior of CO_2, CH_4 and their mixtures in bituminous coal was investigated in this study. First, a bituminous coal model was built through molecular dynamic(MD) simulations, and it was confirmed to be reasonable by comparing the simulated results with the experimental data. Grand Canonical Monte Carlo(GCMC)simulations were then carried out to investigate the single and binary component adsorption of CO_2 and CH_4with the built bituminous coal model. For the single component adsorption, the isosteric heat of CO_2 adsorption is greater than that of CH_4 adsorption. CO_2 also exhibits stronger electrostatic interactions with the heteroatom groups in the bituminous coal model compared with CH_4, which can account for the larger adsorption capacity of CO_2 in the bituminous coal model. In the case of binary adsorption of CO_2 and CH_4mixtures, CO_2 exhibits the preferential adsorption compared with CH_4 under the studied conditions. The adsorption selectivity of CO_2 exhibited obvious change with increasing pressure. At lower pressure, the adsorption selectivity of CO_2 shows a rapid decrease with increasing the temperature, whereas it becomes insensitive to temperature at higher pressure. Additionally, the adsorption selectivity of CO_2 decreases gradually with the increase of the bulk CO_2 mole fraction and the depth of CO_2 injection site.

Molecular Simulation of Transesterification of Ethylene Carbonate and Methanol Catalyzed by Ionic Liquids

Four ionic liquids [BMIM]OH, [BMIM]IM, [BMIM]Br, and [BMIM]PF6 were synthesized and characterized by infrared spectroscopy. Then the effects of ionic liquids(ILs), cocatalysts, and reaction temperature on the catalytic performance for transesterification of ethylene carbonate and methanol were investigated with orthogonal experiments. The influence of cations and anions of ILs on catalytic activity was revealed by the density functional theory(DFT). The reaction mechanism was proposed based on the experimental results and DFT. The results demonstrated that the optimal catalyst was [Bmim]PF6/CaO, which exhibited the advantages of high activity, excellent stability, and easy recycling. Under the optimized conditions covering a catalytic temperature of 130 °C, an ionic liquid/cocatalyst mass ratio of 5:1, and a catalyst dosage of 4.0%, the conversion rate could reach 65.23% with a dimethyl carbonate selectivity of 98.95%. No significant loss of catalyst activity was detected after 7 recycle times.

Molecular simulation studies on natural gas hydrates nucleation and growth:A review

How natural gas hydrates nucleate and grow is a crucial scientific question.The research on it will help solve practical problems encountered in hydrate accumulation,development,and utilization of hydrate related technology.Due to its limitations on both spatial and temporal dimensions,experiment cannot fully explain this issue on a micro-scale.With the development of computer technology,molecular simulation has been widely used in the study of hydrate formation because it can observe the nucleation and growth process of hydrates at the molecular level.This review will assess the recent progresses in molecular dynamics simulation of hydrate nucleation and growth,as well as the enlightening significance of these developments in hydrate applications.At the same time,combined with the problems encountered in recent hydrate trial mining and applications,some potential directions for molecular simulation in the research of hydrate nucleation and growth are proposed,and the future of molecular simulation research on hydrate nucleation and growth is prospected.

MOLECULAR SIMULATION TECHNIQUE ON POLYMERIC MATERIALS

Molecular simulation, or molecular modeling, is recently fast emergingas an important technique of both the research in polymer science and thedesign of polymeric materials. Not only single chain behavior but also bulkproperties of amorphous, crystalline, and liquid crystalline poly-mers can be investigated by this technique. In other fields of science such

Displacement of shale gas confined in illite shale by flue gas: A molecular simulation study

The shale gas is an unconventional supplementary energy to traditional fossil energy,and is stored in layered rocks with low permeability and porosity,which leads to the difficulty for exploration of shale gas.Therefore,using CO_(2) gas to displace shale gas has become an important topic.In this work,we use molecular simulations to study the displacement of shale gas by flue gas rather than CO_(2),in which flue gas is modeled as a binary mixture of CO_(2) and N_(2) and the shale model is represented by inorganic Illite and organic methylnaphthalene.CH_(4) is used as a shale gas model.Compared to the pure CO_(2),flue gas is easily available and the cost of displacement by flue gas would become lower.Results indicate that the pore size of shale is an important factor in the process of displacing shale gas and simultaneously sequestrating flue gas,while the flue gas N_(2)-CO_(2) ratio shows a small effect on the process of CH_(4) displacement,because the high partial pressure of flue gas is the main driving force for displacement of shale gas.Moreover,the geological condition also has a significant effect on the process of CH_(4) displacement by flue gas.Therefore,we suggest that the burial depth of 1 km is suitable operation condition for shale gas displacement.It is expected that this work provides a useful guidance for exploitation of shale gas and sequestration of greenhouse gas.