Structural characterizations andα-glucosidase inhibitory activities of four Lepidium meyenii polysaccharides with different molecular weights

Four polysaccharides(MCPa,MCPb,MCPc,MCPd)were obtained from Lepidium meyenii Walp.Their structures were characterized by chemical and instrumental methods including total sugar,uronic acid and protein content determi-nation,UV,IR and NMR spectroscopy,as well as monosaccharide composition determination and methylation analy-ses.Four polysaccharides were a group of glucans with different molecular weights ranging from 3.12 to 14.4 kDa,and shared a similar backbone chain consisting of(1→4)-glucose linkages with branches attached to C-3 and C-6.Furthermore,bioactivity assay showed that MCPs had concentration-dependent inhibitory activity onα-glucosidase.MCPb(Mw=10.1 kDa)and MCPc(Mw=5.62 kDa)with moderate molecular weights exhibited higher inhibitory activ-ity compared with MCPa and MCPd.

Preparation of polysaccharides in different molecular weights from Ulva pertusa Kjellm (Chorophyta)

As molecular weight controls the biological activities of polysaccharides, screening the optimal molecular weight of polysaccharides is important in drug research and application. In this study, hydrogen peroxide was employed as oxidant, and temperature, reaction time, and concentration of polysaccharides and hydrogen peroxide were examined for their effects on the preparation of polysaccharides in different molecular weights from Ulva pertusa. Our experiment suggested that the optimal degradation concentrations for polysac-charides and hydrogen peroxide were 2.5% (w/v) and 8.0% (v/v), respectively. The range of degradation measured by relative viscosity was mainly controlled by temperature and time. Results revealed that 35℃ was the optimal temperature for obtaining low-degradation samples, and 50℃ was the most favorable temperature to accelerate the reaction to yield highly-degraded samples. Four samples in different molecular weights A, B, C and D were finally prepared. The controllability was evaluated by the relative standard deviation (RSD) of relative viscosity, and the peak molecular weights and the polydispersity indexes (Mw/Mn) of molecular weights were measured by high performance gel permeation chromatography (HPGPC).

Synthesis and Antibacterial Action of Poly(DMAEMA-BC) with Various Molecular Weights

Antibacterial polymers of dimethylaminoethyl methacrylate benzyl ammonium chloride（DMAEMA-BC） with various molecular weights（Mws） were prepared under controlling radical polymerization conditions. The Mws of these polymers were determined by means of static multiangle laser light scattering and viscosity method. A Mark-Houwink equation was established to be [η]=0.154M0.764 for the Mw evaluation of poly（DMAEMA-BC）s. The effects of the Mws of these poly（DMAEMA-BC）s on their antibacterial activities against E. coli and S. aureus were investigated by various methods including viable cell counting, electrical conductivity titration, intracellular constituent leakage tests and electron microscopy. Our results indicate that the antibacterial efficiency of DMAEMA-BC was significantly enhanced after the monomers were polymerized into a polymer and increased obviously with the Mws,as a result of the increase of charge density. Further investigation of the molecular basis underlying the anti-bacterial role of these polymers revealed that poly（DMAEMA-BC） promoted the release of potassium ion from the membrane of bacterial cells and the release increased significantly with the Mws of the polymers used.

Adsorption of Cu（ll）, Ni（ll） and Pb（ll） Ions in Aqueous Solutions by a Biopolymer Chitosan at Different Molecular Weights

In this study, the feasibility of using chitosan, a multifunctional environmentally friendly biopolymer, at different molecular weights to simultaneously adsorb various metal ions from aqueous solutions was evaluated. The experiments were carried out to estimate adsorptivity and selectivity of three molecular weights chitosan, 3.60 × 105 （Chl）, 5.97 × 105 （Ch2） and 9.47 × 105 （Ch3） g/mol, towards Cu（II）, Ni（II）, and Pb（II） ions in aqueous solutions. Experimental results indicated that chitosan of high molecular weight （Ch3） was the best at adsorption capacity than the others. On chitosan solutions followed by Ni（II） and then Cu（II）. the other hand, Pb（lI） had the highest adsorption ability in the three

Effect of Molecular Weight on Thermoelectric Performance of P3HT Analogues with 2-Propoxyethyl Side Chains

By replacing hexyl chains in poly(3-hexylthiophene)(P3HT)with 2-propoxyethyls,four poly(3-(2-propoxyethyl)thiophene)(P3POET)homopolymers with comparable polydispersity indexes(PDI)and regioregularities were prepared herein in addition with step increment of about 7 kDa on numberaverage molecular weight(M_(n))from around 11 to 32 kDa(accordingly denoted as P11k,P18k,P25k,and P32k).When doped in film by FeCl_(3)at the optimized conditions,the maximum power factor(PF_(max))increases greatly from 4.3μW·m^(-1)·K^(-2)for P11k to 8.8μW·m^(-1)·K^(-2)for P18k,and further to 9.7μW·m^(-1)·K^(-2)for P25k,followed by a slight decrease to 9.2μW·m^(-1)·K^(-2)for P32k.The close Seebeck coefficients(S)at PF_(max)are observed in these doped polymer films due to their consistent frontier orbital energy levels and Fermi levels.The main contribution to this PF_(max)evolution thus comes from the corresponding conductivities(σ).Theσvariation of the doped films can be rationally correlated with their microstructure evolution.

Effects of low molecular weight polysaccharide from Sargassum thunbergii against palmitic acid-induced intracellular lipid accumulation in 3T3-L1 adipocyte and HepG2 cells

Low molecular weight polysaccharides can be isolated from Sargassum thunbergii(LMPST)and in vitro experiments were conducted to evaluate the inhibitory effects on lipids.Two natures of LMPST were attained from S.thunbergii and appraised their LMPST on palmitic acid(PA)induced lipid accretion in Hep G2,and 3T3-L1 cells.LMPST treatment lessened lipid deposition and intracellular free fatty acid and triglyceride intensities in PA-treated above mentioned cells.The mechanistic study publicized that LMPST2 significantly suppressed adipogenesis and stimulated the PA-treated 3T3-L1 cells occupied in the lipolysis pathway.Furthermore,in PA-treated Hep G2 cells,the free fatty acid oxidation was significantly increased by LMPST2.Given these constructive properties of LMPST2 from S.thunbergii,is a potential candidate for diminishing the intracellular lipids,and for a therapeutic agent in those conditions.

Active Layer Morphology Engineering of All-polymer Solar Cells by Systematically Tuning Molecular Weights of Polymer Donors/Acceptors

In all-polymer solar cells(APSCs),number-average molecular weights(Mns)of polymer donors and polymer acceptors play an important role in active layer morphology and photovoltaic performance.In this work,based on a series of APSCs with power conversion efficiency of approaching 10%,we study the effect of Mns of both polymer donor and polymer acceptor on active layer morphology and photovoltaic performance of APSCs.We select poly[4-(5-(4,8-bis(5-((2-butyloctyl)thio)thiophen-2-yl)-6-methylbenzo[1,2-b:4,5-b’]dithiophen-2-yl)thiophen-2-yl)-5,6-difluoro-2-(2-hexyldecyl)-7-(5-methylthiophen-2-yl)-2 H-benzo[d][1,2,3]triazole](CD1)as the polymer donor and poly[4-(5-(5,10-bis(2-dodecylhexadecyl)-4,4,9,9-tetrafluuoro-7-methyl-4,5,9,10-tetrahydro3 a,5,8,10-tetraaza-4,9-diborapyren-2-yl)thiophen-2-yl)-7-(5-methylthiophen-2-yl)benzo[c][1,2,5]thiadiazole](PBN-14)as the polymer acceptor.The Mns of polymer donor CD1 are 14.0,35.5 and 56.1 kg/mol,respectively,and the Mns of polymer acceptor PBN-14 are 32.7,72.4 and 103.4 kg/mol,respectively.To get the desired biscontinueous fibrous network morphololgy of the polymer donor/polymer acceptor blends,at least one polymer should have high or medium Mn.Moreover,when the Mn of polymer acceptor is high,the active layer morphology and APSC device performance are insensitive to the Mn of polymer donor.The optimal APSC device performance is obtained when the Mn of both the polymer donor and the polymer acceptor are medium.These results provide a comprehensive and deep understanding on the interplay and the effect of Mn of polymer donors and polymer acceptors in highperformance APSCs.

The Influence of Trans-1,4-poly(butadiene-co-isoprene) Copolymer Rubbers(TBIR) with Different Molecular Weights on the NR/TBIR Blends

The molecular weight of a polymer is of prime importance and greatly influences the processing and mechanical properties of the polymer. Trans-1,4-poly(butadiene-co-isoprene) multi-block copolymer rubbers(TBIR) exhibit outstanding fatigue resistance, low heat build-up and good abrasion resistance, and are expected to be desirable candidate for high performance tire. Study on the influence of TBIR with different molecular weights on the structure and properties of TBIR and natural rubber(NR)/TBIR blends is essential to understand its contribution to the greatly improved dynamic properties of the rubber vulcanizates. TBIR with different molecular weights characterized by 1H-NMR, 13C-NMR, GPC, and DSC were highly trans-1,4-copolymers with similar chain sequence distribution and crystalline trans-1,4-polyisoprene(TPI) blocks. The green strength and modulus of TBIR increased with the increasing molecular weight.The NR/TBIR compounds filled with 40 phr carbon black were chemically cured by sulfur for the preparation of NR/TBIR vulcanizates.The compatibility between NR and TBIR, filler distribution, crosslinking bond and density, and properties of NR/TBIR vulcanizates were studied. The NR/TBIR vulcanizates showed increasing tensile strength, hardness, modulus, rebound, abrasion resistance, and flexural fatigue properties with increasing molecular weight of TBIR. Furthermore, they presented significant improvement in flexural fatigue resistance when compared with that of NR vulcanizate. The contribution mechanism of TBIR on the NR/TBIR blends was discussed. The TBIR with a wide range of molecular weight are ideal rubbers for high performance tires.

Detection of Radical Adducts with Small Molecular Weights by Matrix-Assisted Laser Desorption/Ionization with Fourier Transform Mass Spectrometry

As an alternative method, matrix-assisted laser desorption/ionization with Fourier transform mass spectrometry （MALDI-FTMS） has been successfully used to detect and identify free radical adducts with small molecular weights of hydroxyl and 2-cyano-2-propyl radicals trapped with 5,5-dimethylpyrroline N-oxide （DMPO）. The detection and identification by MS/MS experiments using sustained offresonance irradiation collision-induced dissociation （SORI-CID） of [（DMPO＋·OH-·H）＋H^＋] （m/z 130.0868） and [DMPO＋2 ·CH（CH3）2CN＋H^＋] （m/z 250.1917） have demonstrated that MALDI-FTMS could be an effective method for detection and identification of free radical adducts. Other radical adducts have been also detected and identified. The approach of MALDI-FTMS is simple, fast, and sensitive which has potential for high-throughput analysis.

Entrapment and Sustained Release of Hydrophobic Drugs with Different Molecular Weights from PHBHHx-PEG Nanoparticles

Biodegradable polymeric nanoparticles are more and more frequently used in drug delivery systems, which represent one of the most rapidly developing areas. In our previous study, a novel natural hybrid polyester, polyethylene glycol 200 （PEG200） end-capped poly （3-hydroxybutyrate-co-3-hydroxyhcxanoate） （PHBHHx-PEG） was directly produced by Aeromonas hydrophila fermentation. In this study, the performance of the novel biodegradable PHBHHx-PEG copolyester as a sustained release carrier for hydrophobic drugs with different molecular weights and the in vitro sustained release profile were investigated. 5-Fluorouracil （5-Fu, Mw=130.1）, TGX221 （Mw=364.4）, and Rapamycin （RAP, Mw=914.2） were used as the model drugs. PHBHHx-PEG nanoparticles entrapped with 5-Fu, TGX221 and RAP were fabricated by a modified emulsification/solvent evaporation method, respectively. The average diameter of 5-Fu, TGX221, and RAP loaded PHBHHx-PEG nanoparticles was between 198.2-217.4 nm, and the entrapment efficiency of the three drugs was 62.5%, 93.4% and 91.9%, respectively. The in vitro release profiles of 5-Fu, TGX221 and RAP from PHBHHx-PEG nanoparticles were different. 5-Fu showed faster release rate and an obvious initial burst release phase. TGX221 and RAP were demonstrated to be released more slowly and steadily. The release percentages of 5-Fu, TGX221 and RAP were 97.7%, 85.1% and 74.7% after releasing for 72 h. PHBHHx-PEG is a kind of promising material as a carrier for the entrapment and delivery of hydrophobic drugs especially for those drugs with high molecular weight.

Pharmacokinetics of fucoidan and low molecular weight fucoidan from Saccharina japonica after oral administration to mice

The brown seaweed,Sacchairna japonica,has been used in traditional Chinese medicine for over one thousand years.Oral administration of fucoidan or low molecular weight fucoidan(LMWF)from S.japonica could ameliorate kidney dysfunction in chronic kidney diseases and inhibit diabetic vascular complications.In many studies,LMWF was found to be more potent than fucoidan with high molecular weight.However,the pharmacokinetics of LMWF still remains unclear.The purpose of the research is to compare the pharmacokinetics of fucoidan with high molecular weight(136 kDa)with that low molecular weight(9.5 kDa)after oral administration to ICR mice.Since fucose is the main and representative monosaccharide of fucoidans,we evaluate the pharmacokinetics of fucoidan and LMWF by determining the fucose concentration in mice serum.Both fucoidan and LMWF were absorbed following oral administration.Fucoidan and LMWF were provided to mice by oral administration with 60 mg/kg and the maximum Concentration(C_(max))was found at 2.5 h(0.66±0.32 mg/L)for Fucoidan and 1.5 h(1.01±0.56 mg/L)for LMWF,respectively.It seems that LMWF had a higher area under the curve(AUC_(0–t))and was absorbed more quickly than fucoidan.The estimated bioavailability of LMWF was28.3%in the mice treated with a single dose of 30 mg/kg.In addition,LMWF was found widely spreaded into different tissues following oral administration and the highest concentration was found in kidney at 19.93±7.02μg/g.In this study,we first studied the pharmacokinetics of LMWF,in order to help to understand the function of LMWF.And our results shed light on the potential of development of drugs based on LMWF.

Purification and immunoglobulin E epitopes identification of low molecular weight glutenin:an allergen in Chinese wheat

As one of the most important cereals,wheat(Triticum aestivum)has high nutritional value and is widely cultivated in China.However,wheat can cause severe allergic reactions,and a growing number of people are developing allergies to Chinese wheat.Low molecular weight glutenin(LMW-GS),an important allergen in susceptible populations,is responsible for celiac disease and wheat contacts dermatitis.In this study,LMW-GS was highly purified from Chinese wheat(Xiaoyan 6)and further identified and characterized.In addition,8 peptides were predicted efficiently by 5 immunological tools,among which 5 peptides showed significant immunoglobulin E binding abilities.Two specific epitopes were found to be in the non-conserved region of the amino acid sequence of LMW-GS,which was speculated to be the specific epitope of Chinese wheat.This systematic research of LMW-GS may provide new insights into the prevention of wheat allergy and development of hypoallergenic wheat products.

Ballistic Penetration Damage of Hybrid Thermoplastic Composites Reinforced with Kevlar and UHMWPE Fabrics

Polymer matrix types of fiber hybrid composites are key factors to improve ballistic impact damage tolerances.Here we report ballistic penetration damages of Kevlar/ultra-high molecular weight polyethylene(UHMWPE)hybrid composites with thermoplastic polyurethane(PU)matrix.The hybrid composites were penetrated by fragment-simulating projectiles(FSPs)using an air gun impact system.The effects of stacking sequences on the ballistic performance of hybrid composites were analyzed.Two types of specific energy absorption(the energy absorption per unit area density and the energy absorption per unit thickness)were investigated.It was found that the main damage modes of PU hybrid composites were fiber breakage,matrix damage,fiber pullout and interlayer delamination.The instantaneous deformation could not be used as a reference index for evaluating the ballistic performance of the target plate.The energy absorption process of the PU hybrid composites showed a nonlinear pattern.The hybrid structure affected the specific energy absorption of the materials.

Analysis of Molecular Weight Distribution and Antioxidant Activities of Cirrhinus molitorella Skin Collagen Hydrolysates

[Objective] The aim of this work was to identify molecular weight （MW） distribution and antioxidant activity of fish skin col agen hydrolysates. [Method] The MW distribution of hydrolysates was determined using both size exclusion chromatography and matrix-assisted laser desorption ionization time-of-flight mass spec-trometry （MALDI-TOF-MS）. Fish skin were treated by the alkaline protease 2709. [Result] The optional conditions for hyerolysis were time 3 h, temperature 55 ℃, pH 10.0, substrate concentration 80 g/L and E/S 4%. The results of both methods indi-cated that the molecular weight of col agen hydrolysates was from 400 to 1 800 Da, and the peptides’ molecular weight was less than 1 400 Da mostly. The reducing power and antioxidant/radical scavenging activity [1, 1-diphenyl-2-picryl-hydrazyl （DPPH） free radical scavenging activity] were determined. [Conclusion] The results reveal that the fishskin hydrolysate is a potential source of antioxidants.

Efficacy and Safety of Low Molecular Weight Heparin Prophylaxis for Venous Thromboembolism Following Lumbar Decompression Surgery

Objective To evaluate the efficacy and safety of low molecular weight heparin (LMWH) prophylaxis for venous thromboembolism (VTE) after lumbar decompression surgery. Methods Patients at high or the highest risk of VTE who underwent lumbar spine surgery in Peking Union Medical College Hospital from January 2004 to April 2011 were included in the present study. All the patients received a half dose of LMWH 6 hours after surgery followed by a full dose LMWH once per day until discharge. We recorded incidences of deep venous thrombosis (DVT), pulmonary embolism (PE), bleeding complications, and medication side effects. Results Seventy-eight consecutive patients were eligible and enrolled in this study. The mean hospital stat was 8.5±4.5 days. No symptomatic DVT, PE, or major bleeding events were observed. One patient developed wound ecchymosis, another developed wound bleeding, four had mild hepatic aminotransferase level elevation, and one developed a suspicious allergic reaction. Conclusion LMWH may be applied as an effective and safe prophylaxis for VTE in high-risk patients undergoing lumbar decompression surgery.

Biosynthesis of poly-3-hydroxybutyrate with a high molecular weight by methanotroph from methane and methanol

Poly-3-hydroxybutyrate （PHB） can be produced by various species of bacteria. Among the possible carbon sources, both methane and methanol could be a suitable substrate for the production of PHB. Methane is cheap and plentiful not only as natural gas, but also as biogas. Methanol can also maintain methanotrophic activity in some conditions. The methanotrophic strain Methylosinus trichosporium IMV3011 can accumulate PHB with methane and methanol in a brief nonsterile process. Liquid methanol （0.1%） was added to improve the oxidization of methane. The studies were carried out using shake flasks. Cultivation was performed in two stages： a continuous growth phase and a PHB accumulation phase under the conditions short of essential nutrients （ammonium, nitrate, phosphorus, copper, iron （Ⅲ）, magnesium or ethylenediamine tetraacetate （EDTA）） in batch culture. It was found that the most suitable growth time for the cell is 144 h. Then an optimized culture condition for second stage was determined, in which the PHB concentration could be much increased to 0.6 g/L. In order to increase PHB content, citric acid was added as an inhibitor of tricarboxylic acid cycle （TCA）. It was found that citric acid is favorable for the PHB accumulation, and the PHB yield was increased to 40% （w/w） from the initial yield of 12% （w/w） after nutrient deficiency cultivation. The PHB produced is of very high quality with molecular weight up to 1.5 × 10^6Da.

Study on the influence of humic acid of different molecular weight on basic ion exchange resin's adsorption capacity

In this paper, humic acid （HA） was ultra-filtered into different molecular weight sections and was characterized by multielement analysis, UV254/TOC, FT-IR and three-dimensional fluorescence spectrometric. Since humic acids of different molecular weights have different hydrophilic and molecular size, the maximum adsorption capacity of basic ion exchange resins appears on the humic acid whose molecular weight ranges from 6000 to 10,000 Da.

Study on Enzymatic Hydrolysis of Gadus morrhua Skin Collagen and Molecular Weight Distribution of Hydrolysates

Process parameters on enzymatic hydrolysis and molecular weight （MW） distribution of collagen hydrolysates from Gadus morrhua skin were investigated. The optimal process parameters were obtained by the single-factor and orthogonal experiments. The molecular weight distribution of hydrolysates was determined using both Sephadex G25 partition and high speed liquid chromatography electricity spray mass spectrum （HPLC-ESI-MS）. Collagen hydrolysates were first gained by an alkaline protease ＂alcalase＂ for 3 h at temperature （50~C）, pH （10.0）, substrate concentration （75 g L-~）, and E/S （3%）. The molecular weight distribution of collagen hydrolysates ranged from 300 to 1 500 Da, and most of peptides were under 1 200 Da. Sephadex G25 partition and HPLC-ESI-MS should be successfully employed to determine the molecular weight distribution of collagen hydrolysates.

A HIGHLY ACTIVE NEODYMIUM CHLORIDE ISOPROPANOL COMPLEX/MODIFIED METHYLALUMINOXANE CATALYST FOR PREPARING POLYISOPRENE WITH HIGH CIS-1,4 STEREOSPECIFICITY AND NARROW MOLECULAR WEIGHT DISTRIBUTION

Neodymium chloride isopropanol complex （NdCl3.3＇prOH） activated by modified methylaluminoxane （MMAO） was examined in isoprene polymerization in hexane, with regards to Nd compounds, aluminum （Al） compounds, [Al]/[Nd] ratio, polymerization temperature and time. NdCl3＇3iprOH exhibited high activity producing polymers feasting high cis-l,4 stereospecificity （〉 96%）, very high molecular weight （Mn 〉 1.0 × 10^6） and fairly narrow molecular weight distribution （MWD, Mw/Mn 〈 2.0） simultaneously. In comparison, neodymium isopropoxide also showed high activity providing polymers with narrow MWD （Mw/Mn = 2.07）, but somewhat low cis-1,4 content （ca. 92%）, while neodymium chloride had no activity under present polymerization conditions. The Al compounds affected the polymer yield in the order of Al（i-Bu）3 〉 MMAO 〉 Al（i-Bu）2H. MMAO as cocatalyst afforded polyisoprene with high Mn over 1.0 × 10^6, whereas as stronger chain transfer agent than MMAO, AI（i-Bu）3 and AI（i-Bu）EH yielded polymers with low Mn （1.0 × 10^5-8.0 × 10^5）. NdCl3·3＇PrOH/MMAO catalyst showed a fairly good catalytic activity even at relatively low [Al]/[Nd] ratio of 30, and the produced polymer remained high cis-1,4 content of 95.8% along with high Mn over 1.0× 10^6 even at elevated temperatures up to 70℃. The polymerization rate is of the first order with respect to the concentration of isoprene. The mechanism of active species formation was discussed preliminarily.

STRUCTURE,MOLECULAR WEIGHT AND BIOACTIVITIES OF(1→3)-β-D-GLUCANS AND ITS SULFATED DERIVATIVES FROM FOUR KINDS OF LENTINUS EDODES

Lentinan samples,(1→3)-β-D-glucans containing 4.6-15.2 wt% proteins,coded as L-I_1 L-I_2 L-I_3 and L-I_4(L-I)were isolated from four kinds of Lentinus edodes.These glucans were treated with acetone to remove the protein in orderto obtain free protein glucans coded as LNP-I_1,LNP-I_2.LNP-I_3 and LNP-I_4(LNP-I).The free-protein polysaccharideswere sulfated to give derivatives(S-LNP-I)with degree of substitution(DS)from 0.4-0.8.The structural features andweight-average molecular weight(M_w)of the samples were investigated by using infrared spectroscopy,elemental analysis,^(13)C-NMR,size exclusion chromatography combined with laser light scattering(SEC-LLS)and viscometry.The effects ofstructure and conformation of the polysaccharides on antitumor activities were assayed in vivo(Sarcoma 180 solid tumors)and in vitro(Sarcoma 180,HL-60,MCF-7 and Vero tumors).The results indicated that the predominant species of thesamples L-I and LNP-I in 0.2 mol/L NaCl aqueous solution existed as triple-helical chains with high rigidity and in dimethylsulfoxide(DMSO)as single-flexible chains.Interestingly,the antitumor activities of LNP-I are lower than those of the nativeglucans(L-I),whereas their sulfated derivatives have higher inhibition ratio against Sarcoma 180 than LNP-I.The resultsreveal that the binding of protein,sulfated modification and the triple helix conformation are important factors in theenhancement of the antitumor activities of polysaccharides on the whole.