Differences between total amount of heavy metals and their occurrence form contents in the wastelands of a molybdenum mine area

In a single sample plot,the total amount of heavy metals in the soil could not necessarily reflect the contents of their effective states.This must be considered when attempting to determine the degree of soil heavy-metal pollution in an area.In the present study,the soil around the molybdenum mining area in Huludao,China,was surveyed and sampled to evaluate soil heavy-metal pollution using the Nemerow multifactor pollution index method.The Tessier continuous extraction method was used to analyze the distribution of heavy-metal forms'and their content changes in the soil of this area.Thus,the bioactivity of heavy metals in the soil,the absorption of heavy metals by plants,and the distribution of heavy metals in plants were explored to provide data supporting the use of phytoremediation technology to treat the heavy-metal pollution in the molybdenum mining area and develop ecological restoration strategies for the area's wastelands.The pollution index results indicate that heavy-metal pollution in the soil around the tailings pond is severe,mainly due to Pb and Zn heavy metals.Heavy-metal pollution in the surrounding land is mainly due to Cd and Zn.Content analysis of the heavy-metal forms/states in soils shows that exchangeable forms,which are most effective and toxic to plants,of the following metals are highest in the following areas:Cd,Cu,and Zn in the mountains around the stope;Zn,Mo,and Cu in the cultivated land around the dump;and Cd,Zn,and Mo in the cultivated land around the tailings pond.The pollution index analysis provides a basic overview of soil heavy-metal pollution across the entire mining area.However,content analysis of heavy-metal forms/states better reflects the relationship between the availability of heavy metals in the soil and the effectiveness of plants.Thus,the latter analysis can help ensure that phytoremediation strategies are adequately targeted,science-based,and effective.

Geology and mineralization of the Daheishan supergiant porphyry molybdenum deposit(1.65 Bt),Jilin,China:A review

The Daheishan supergiant porphyry molybdenum deposit(also referred to as the Daheishan deposit)is the second largest molybdenum deposit in Asia and ranks fifth among the top seven molybdenum deposits globally with total molybdenum reserves of 1.65 billion tons,an average molybdenum ore grade of 0.081%,and molybdenum resources of 1.09 million tons.The main ore body is housed in the granodiorite porphyry plutons and their surrounding inequigranular granodiorite plutons,with high-grade ores largely located in the ore-bearing granodiorite porphyries in the middle-upper part of the porphyry plutons.Specifically,it appears as an ore pipe with a large upper part and a small lower part,measuring about 1700 m in length and width,extending for about 500 m vertically,and covering an area of 2.3 km^(2).Mineralogically,the main ore body consists of molybdenite,chalcopyrite,and sphalerite horizontally from its center outward and exhibits molybdenite,azurite,and pyrite vertically from top to bottom.The primary ore minerals include pyrite and molybdenite,and the secondary ore minerals include sphalerite,chalcopyrite,tetrahedrite,and scheelite,with average grades of molybdenum,copper,sulfur,gallium,and rhenium being 0.081%,0.033%,1.67%,0.001%,and 0.0012%,respectively.The ore-forming fluids of the Daheishan deposit originated as the CO_(2)-H_(2)O-NaCl multiphase magmatic fluid system,rich in CO_(2)and bearing minor amounts of CH4,N2,and H2S,and later mixed with meteoric precipitation.In various mineralization stages,the ore-forming fluids had homogenization temperatures of>420℃‒400℃,360℃‒350℃,340℃‒230℃,220℃‒210℃,and 180℃‒160℃and salinities of>41.05%‒9.8%NaCleqv,38.16%‒4.48%NaCleqv,35.78%‒4.49%NaCleqv,7.43%NaCleqv,and 7.8%‒9.5%NaCleqv,respectively.The mineralization of the Daheishan deposit occurred at 186‒167 Ma.The granites closely related to the mineralization include granodiorites(granodiorite porphyries)and monzogranites(monzogranite porphyries),which were mineralized after magmatic evolution(189‒167 Ma).Moreover,these mineralization-related granites exhibit low initial strontium content and high initial neodymium content,indicating that these granites underwent crust-mantle mixing.The Daheishan deposit formed during the Early-Middle Jurassic,during which basaltic magma underplating induced the lower-crust melting,leading to the formation of magma chambers.After the fractional crystallization of magmas,ore-bearing fluids formed.As the temperature and pressure decreased,the ore-bearing fluids boiled drops while ascending,leading to massive unloading of metal elements.Consequently,brecciated and veinlet-disseminated ore bodies formed.

Robust T_c in element molybdenum up to 160 GPa

Element superconductors with the single atoms provide clean and fundamental platforms for studying superconductivity.Although elements with d electrons are usually not favored by conventional BCS,the record superconducting critical temperature(T_(c))in element scandium(S_(c))has further ignited the intensive attention on transition metals.The element molybdenum(M_o)with a half-full d-orbital is studied in our work,which fills the gap in the study of Mo under high pressure and investigates the pressure dependence of superconductivity.In this work,we exhibit a robust superconductivity of Mo in the pressure range of 5 GPa to 160 GPa via high-pressure electrical transport measurements,the T_(c) varies at a rate of0.013 K/GPa to 8.56 K at 160 GPa.Moreover,the superconductivity is evidenced by the T_(c) shifting to lower temperature under applied magnetic fields,and the upper critical magnetic fields are extrapolated by the WHH equation and GL equation;the results indicate that the maximum upper critical magnetic field is estimated to be 8.24 T at 137 GPa.We further investigate the superconducting mechanism of Mo,the theoretical calculations indicate that the superconductivity can be attributed to the strong coupling between the electrons from the partially filled d band and the phonons from the frequency zone of 200-400 cm^(-1).

Membrane-less MoO_(3-x)@TiO_(2)-bromine battery with excellent rate capability and cyclic stability

Bromine has attracted significant attention as a cathode material for aqueous batteries due to its high reduction potential of 1.05 V(Br_(3)^(-)+2e~-■3Br~-),impressive theoretical specific capacity of 223 mA h g^(-1),and rapid reaction kinetics in the electrolyte.However,searching for compatible anode materials to match with bromine has posed a challenge due to its highly corrosive nature.In this study,we developed oxygen-deficient MoO_(3) with TiO_(2) coating(referred to as MoO_(3-x)@TiO_(2))as an anode material to pair with a bromine cathode in static full batteries.The oxygen deficiency contributes to enhanced electronic and protonic diffusion within the MoO_(3-x)lattice,while the TiO_(2) coating mitigates structural dissolution and proton trapping during cycling.The MoO_(3-x)@TiO_(2) demonstrates fast charge storage kinetics and excellent resistance to bromine corrosion.The impressive compatibility between MoO_(3-x)@TiO_(2) and bromine enables the construction of membrane-less full batteries with exceptional rate capability and cyclic stability.The MoO_(3-x)@TiO_(2)-bromine battery achieves an energy density of70.8 W h kg^(-1)at a power density of 328.1 W kg^(-1),showcasing an impressive long-term cyclic life of 20,000 cycles.Our study provides valuable insights for the development of high-performance aqueous secondary batteries.

Measurement of 2p-3d absorption in a hot molybdenum plasma

We present measurements of the 2p-3d transition opacity of a hot molybdenum-scandium sample with nearly half-vacant molybdenum M-shell configurations.A plastic-tamped molybdenum-scandium foil sample is radiatively heated to high temperature in a compact D-shaped gold Hohlraum driven by∼30 kJ laser energy at the SG-100 kJ laser facility.X rays transmitted through the molybdenum and scandium plasmas are diffracted by crystals and finally recorded by image plates.The electron temperatures in the sample in particular spatial and temporal zones are determined by the K-shell absorption of the scandium plasma.A combination of the IRAD3D view factor code and the MULTI hydrodynamic code is used to simulate the spatial distribution and temporal behavior of the sample temperature and density.The inferred temperature in the molybdenum plasma reaches a average of 138±11 eV.A detailed configuration-accounting calculation of the n=2–3 transition absorption of the molybdenum plasma is compared with experimental measurements and quite good agreement is found.The present measurements provide an opportunity to test opacity models for complicated M-shell configurations.

Multiscale confinement nitridation in molybdenum carbide for efficient hydrogen production

The molybdenum carbide(Mo_(2)C)has been regarded as one of the most cost-efficient and stable electrocatalyst for the hydrogen evolution reaction(HER)by the virtue of its Pt-like electronic structures.However,the inherent limitation of high density of empty valence band significantly reduces its catalytic reactivity by reason of strong hydrogen desorption resistance.Herein,we propose a multiscale confinement synthesis method to design the nitrogen-rich Mo_(2)C for modulating the band structure via decomposing the pre-coordination bonded polymer in a pressure-tight tube sealing system.Pre-bonded c/N-Mo in the coordination precursor constructs a micro-confinement space,enabling the homogeneous nitrogenization in-situ happened during the formation of Mo_(2)C.Simultaneously,the evolved gases from the precursor decomposition in tube sealing system establish a macro-confinement environment,preventing the lattice N escape and further endowing a continuous nitridation.Combining the multiscale confinement effects,the nitrogen-rich Mo2C displays as high as 25%N-Mo concentration in carbide lattice,leading to a satisfactory band structure.Accordingly,the constructed nitrogen-rich Mo_(2)C reveals an adorable catalytic activity for HER in both alkaline and acid solution.It is anticipated that the multiscale confinement synthesis strategy presents guideline for the rational design of electrocatalysts and beyond.

Preparation of sodium molybdate from molybdenum concentrate by microwave roasting and alkali leaching

The preparation process of sodium molybdate has the disadvantages of high energy consumption,low thermal efficiency,and high raw material requirement of molybdenum trioxide,in order to realize the green and efficient development of molybdenum concentrate resources,this paper proposes a new process for efficient recovery of molybdenum from molybdenum concentrate and preparation of sodium molybdate by microwave-enhanced roasting and alkali leaching.Thermodynamic analysis indicated the feasibility of oxidation roasting of molybdenum concentrate.The effects of roasting temperature,holding time,and power-to-mass ratio on the oxidation product and leaching product sodium molybdate (Na_(2)MoO_(4)·2H_(2)O) were investigated.Under the optimal process conditions:roasting temperature of 700℃,holding time of 110 min,and power-to-mass ratio of 110 W/g,the molybdenum state of existence was converted from MoS_(2) to Mo O3.The process of preparing sodium molybdate by alkali leaching of molybdenum calcine was investigated,the optimal leaching conditions include a solution concentration of 2.5 mol/L,a liquid-to-solid ratio of 2 mL/g,a leaching temperature of 60℃,and leaching solution termination at pH 8.The optimum conditions result in a leaching rate of sodium molybdate of 96.24%.Meanwhile,the content of sodium molybdate reaches 94.08wt%after leaching and removing impurities.Iron and aluminum impurities can be effectively separated by adjusting the pH of the leaching solution with sodium carbonate solution.This research avoids the shortcomings of the traditional process and utilizes the advantages of microwave metallurgy to prepare high-quality sodium molybdate,which provides a new idea for the highvalue utilization of molybdenum concentrate.

Molybdenum isotope composition of the upper mantle and its origin:insight from mid-ocean ridge basalt

The molybdenum(Mo)isotope system is pivotal in reconstructing marine redox changes throughout Earth’s history and has emerged as a promising tracer for igneous and metamorphic processes.Understanding its composition and variation across major geochemical reservoirs is essential for its application in investigating high-temperature processes.However,there is debate regarding theδ^(98/95)Mo value of the Earth’s mantle,with estimates ranging from sub-chondritic to super-chondritic values.Recent analyses of global mid-ocean ridge basalt(MORB)glasses revealed significantδ^(98/95)Mo variations attributed to mantle heterogeneity,proposing a two-component mixing model to explain the observed variation.Complementary studies confirmed the sub-chondriticδ^(98/95)Mo of the depleted upper mantle,suggesting remixing of subduction-modified oceanic crust as a plausible mechanism.These findings underscore the role of Mo isotopes as effective tracers for understanding dynamic processes associated with mantle-crustal recycling.

Chemiluminescence Determination of Molybdenum by on-Line Reduction with a Flow Injection System

The chemiluminescence (CL) reaction between lucigenin (Lu) and molybdenum (III) produced by a Jones reductor was investigated using a flow injection system. On the basis of this, a novel method for the determination of trace amount of molybdenum has been established. The emission intensity was linear with molybdenum concentration in the range of 0.1-1000 ng/mL; the detection limit was 0.02 ng/mL molybdenum; the relative standard deviation was less than 2% for the determination of 0.1 ng/mL molybdenum (n=11). The method has been applied successfully to the analysis of trace molybdenum in water and steel samples.

Developing polydopamine modified molybdenum disulfide/epoxy resin powder coatings with enhanced anticorrosion performance and wear resistance on magnesium lithium alloys

Epoxy resin powder coating has been successfully applied on the corrosion protection of magnesium lithium alloys.However,poor wear resistance and microcracks formed during the solidification have limited it extensive application.There are limited approaches to exploit such anti-corrosion and mechanical properties of magnesium lithium alloys.Herein,the epoxy resin powder coating with polydopamine modified molybdenum disulfide(MoS_(2)@PDA-EP powder coating with 0,0.1,0.2,0.5,1.0 wt.%loading)was well prepared by melt extrusion to investigate its anticorrosion performance and wear resistance.The results revealed that the addition of MoS_(2)@PDA enhanced the adhesion strength between coatings and alloys,wear resistance and corrosion protection of the powder coatings.Among them,the optimum was obtained by 0.2 wt.%MoS_(2)@PDA-EP powder coating which could be attributed to well dispersion and efficient adhesion with coating matrix.To conclude,MoS_(2)@PDA-EP powder coating is meaningfully beneficial for the anticorrosive and wear performance improvement of magnesium lithium alloys.

Amine-functionalized boehmite nanoparticle-supported molybdenum and vanadium complexes:Efficient catalysts for epoxidation of alkenes

Boehmite nanoparticles with a high surface area and a high degree of surface hydroxyl groups were covalently functionalized by 3‐（trimethoxysilyl）‐propylamine to support vanadium‐oxo‐sulfate and molybdenum hexacarbonyl complexes. These supported catalysts were then characterized by Fou‐rier‐transform infrared spectroscopy, powder X‐ray diffraction, thermogravimetry and differential thermal analysis, X‐ray‐photoelectron spectroscopy, elemental analysis, inductively coupled plasma, and transmission electron microscopy techniques. The catalysts were subsequently used for the epoxidation of cis‐cyclooctene, and the experimental procedures were optimized. The progress of the reactions was investigated by gas‐liquid chromatography. Recycling experiments revealed that these nanocatalysts could be repeatedly used several times for a nearly complete epoxidation of cis‐cyclooctene. The optimized experimental conditions were also used successfully for the epoxida‐tion of some other substituted alkenes.

Recovery of molybdenum，phosphorus and arsenic from leaching solution ofmolybdenum residues by solvent extraction with primary amine and tributylphosphate

Ｒｅｃｏｖｅｒｙｏｆｍｏｌｙｂｄｅｎｕｍ，ｐｈｏｓｐｈｏｒｕｓａｎｄａｒｓｅｎｉｃｆｒｏｍｌｅａｃｈｉｎｇｓｏｌｕｔｉｏｎｏｆｍｏｌｙｂｄｅｎｕｍｒｅｓｉｄｕｅｓｂｙｓｏｌｖｅｎｔｅｘｔｒａｃｔｉｏｎｗｉｔｈｐｒｉｍａｒｙａｍｉｎｅａｎｄｔｒｉｂｕｔ...

Molybdenum disulfide as hydrogen evolution catalyst:From atomistic to materials structure and electrocatalytic performance

Hydrogen production via water electrolysis defines the novel energy vector for achieving a sustainable society.However,the true progress of the given technology is hindered by the sluggish and complex hydrogen evolution reaction(HER)occurring at the cathodic side of the system where overpriced and scarce Pt-based electrocatalysts are usually employed.Therefore,efficient platinum group metals(PGMs)-free electrocatalysts to carry out HER with accelerated kinetics are urgently demanded.In this scenario,molybdenum disulfide(MoS_(2))owing to efficacious structural attributes and optimum hydrogen-binding free energy(ΔG_(H*))is emerging as a reliable alternative to PGMs.However,the performance of MoS_(2)-based electrocatalysts is still far away from the benchmark performance.The HER activity of MoS_(2)can be improved by engineering the structural parameters i.e.,doping,defects inducement,modulating the electronic structure,stabilizing the 1 T phase,creating nanocomposites,and altering the morphologies using appropriate fabrication pathways.Here,we have comprehensively reviewed the majority of the scientific endeavors published in recent years to uplift the HER activity of MoS_(2)-based electrocatalysts using different methods.Advancements in the major fabrication strategies including hydrothermal synthesis methods,chemical vapor deposition,exfoliation techniques,plasma treatments,chemical methodologies,etc.to tune the structural parameters and hence their ultimate influence on the electrocatalytic activity in acidic and/or alkaline media have been thoroughly discussed.This study can provide encyclopedic insights about the fabrication routes that have been pursued to improve the HER performance of MoS_(2)-based electrocatalysts.

Study on the Inert Coordination Compound in the System of“Molybdenum(Ⅵ)—TAE—Hydroxylamine”and its Analytical Application

In the presence of ethyl alcohol or emulsifier OP,molybdenum(Ⅵ) forms 1∶1∶1'water soluble colored coordination com- pound with both of 2-(2-thiazolylazo)-5-diethylaminophenol (abbreviation TAE) and hydroxylamine.This deep blue coordination compound is inert characteristically and remains stable in 1.7 mol/L sulfuric acid,2.4 mol/L hydrochloric or ni- tric acid.It will not be decomposed by masking agents even on boiled,while in that case,almost all the colored coordination com- pounds formed by other metal ions will be decomposed completely.This inert character of the coordination compound of molybdenum(Ⅵ) and its utilization in improving the analytical selectivity have been discussed.In the coexistence of various for- eign ions,especially in the presence of a great quantity of tungsten,which always interferes with the determination of molybdenum,the direct determination of molybdenum in the aqueous solution by applying this system has shown an acceptable sensitivity and reproducibility.From the results of determination in some synthetic and standard samples,it seems feasible to use this system in the determination of molybdenum in nonferrous alloys.

Determination of Trace Molybdenum in Plant Seeds by Electrochemiluminescence Method

[ Objective] This study aimed to establish an electrochemiluminescence method for determining the trace molybdenum in plant seeds. [ Method ] The equipment used in this study consisted of an electrogenerated reagent system and a flow-injection chemiluminescence detection system. The optimal electric poten- tial, reagent acidity, flow rate of sample solution, as well as the concentration and alkalinity of luminal were screened to measure the trace molybdenum in plant seeds. [ Result I The unstable molybdenum （III） was on-line electrogenerated from molybdenum （VI） via controlled potential electrolysis technique using a home- made flow-through carbon electrolytic cell at the potential of -0.60 V （vs Ag/AgC1）. The method allowed the determination of 5.0 × 10-10 _ 5.0 ×10-7 g/ml mo- lybdenum with a detection limit of 5 × 10 u g/ml molybdenum （VI）. The relative standard deviation was 2.6% for the 1.0 × 10 -9 g/ml molybdenum solution in 11 measurements. [ Conclusion] Compared with the previous methods, this electrochemilum^nescence method not only improved the selectivity of the determina- tion, but also avoided the use of toxic reagent mercury.

Mesoporous molybdenum carbide for greatly enhanced hydrogen evolution at high current density and its mechanism studies

Currently the catalysis of hydrogen evolution reaction(HER)is mainly focused on the inherent electrocatalytic activity at relatively lower current densities while scarce at high current densities.Nevertheless,the latter is highly demanding in efficient mass-production of hydrogen.A SiO_(2) nanospheres template-synthesis is used to prepare mesoporous molybdenum carbide nanocrystals-embedded nitrogen-doped carbon foams(mp-Mo_(2)C/NC).The material shows much more excellent catalytic activity than the non-etched Mo_(2)C/NC toward hydrogen evolution reaction(HER)in acidic medium.More interestingly mp-Mo_(2)C/NC still has larger overpotential than Pt/C at lower current densities,but possess remarkably smaller overpotential than the latter at higher current densities for much better electrocatalytic performance.An approach is developed to investigate the electrode kinetics by Tafel plots,especially with eliminating the diffusion effect,indicating that Pt/C and mp-Mo_(2)C/NC display different reaction mechanisms.At low current densities the former presents reversible reaction,while the latter shows mixed electrochemical polarization/reversible electrode process.In the region of higher current densities,the former becomes totally gas-diffusion controlled with large overpotential,while the latter can still retain an electrode polarization process for much lower overpotential at the same current density.Result endorses that the meso-porously structured mp-Mo_(2)C/NC plays a critical role in avoiding gas diffusion control-resulting large overpotential at high current densities.This work holds great potential for an inexpensive catalyst better than Pt/C in practical applications of mass-production hydrogen at high current densities,while clearly shedding fundamental lights on designs of rational HER catalysts for the uses at high current densities.

Xinjiang Discovered the Largest Molybdenum Mine Deposit,Submitted 573000 Tonnes of Molybdenum Metal Volume

According to Xinjiang Bureau of Geology and Mineral Exploration:An ultra large molybdenum mine was newly discovered near Yumin County,the molybdenum metal volume currently in application for record keeping is573,000 tonnes,which is the biggest molybdenum mine deposit discovered in Xinjiang up till now.

The Third Largest Tungsten andMolybdenum Mine in Asia Discovered at Zhangye,Gansu

The third largest tungsten and molybdenum (an important strategic rare metal) mine in Asia, which consists of four deposits, namely

Molybdenum tailored Co^(0)/Co^(2+)active pairs on a perovskite-type oxide for direct ethanol synthesis from syngas

Selective synthesis of ethanol from syngas under the Co-based catalysts is still challenging due to the hard of regulating the active site Co^(0) and Co^(2+)ratio.In this work,a series of CaTi_(0.9-x)Co_(x)Mo_(0.1)O_(3)(x=0,0.1-0.4)and CaTi_(0.7)Co_(0.3)O_(3) catalysts were prepared by using citric acid complexation method to promote the synthesis of ethanol.It was found that Mo species in the perovskite lattice can regulate the Co^(0) and Co^(2+)ratio through the domain-limiting effect of perovskite and the degree of Co reduction could be adjusted by changing the Co/Mo molar ratio.Among these investigated catalysts,the total selectivity of alcohols over the catalyst with the optimal Co/Mo ratio CaTi_(0.6)Co_(0.3)Mo_(0.1)O_(3) reached 39.1%,with ethanol accounting for 74.7%,which was ascribed to the moderate and tightly bound ratio of dissociative to non-dissociative adsorption sites on the surface and the balance of CH_(x)-CH_(y) coupling and C^(O) insertion.

Photoluminescence Enhancement of Aluminum Ion Intercalated MoS_(2)Quantum Dots

Low photolumines-cence(PL)quantum yield of molybdenum disulfide(MoS_(2))quan-tum dots(QDs)has lim-ited practical applica-tion as potential fluores-cent materials.Here,we report the intercalation of aluminum ion(Al^(3+))to enhance the PL of MoS_(2)QDs and the un-derlying mechanism.With detailed characterization and exciton dynamics study,we suggest that additional surface states including new emission centers have been effectively introduced to MoS_(2)QDs by the Al^(3+)intercalation.The synergy of new radiative pathway for exciton re-combination and the passivation of non-radiative surface traps is responsible for the en-hanced fluorescence of MoS_(2)QDs.Our findings demonstrate an efficient strategy to improve the optical properties of MoS_(2)QDs and are important for understanding the regulation effect of surface states on the emission of two dimensional sulfide QDs.