Attitude maneuver of liquid-filled spacecraft with a flexible appendage by momentum wheel

Attitude maneuver of liquid-filled spacecraft with an appendage as a cantilever beam by momentum wheel is studied. The dynamic equations are derived by conserva- tion of angular momentum and force equilibrium principle. A feedback control strategy of the momentum wheel is ap- plied for the attitude maneuver. The residual nutation of the spacecraft in maneuver process changes with some chosen parameters, such as steady state time, locations of the liq- uid container and the appendage, and appendage parame- ters. The results indicate that locations in the second and fourth quadrants of the body-fixed coordinate system and the second quadrant of the wall of the main body are better choices for.placing the liquid containers and the appendage than other locations if they can be placed randomly. Higher density and thicker cross section are better for lowering the residual nutation if they can be changed. Light appendage can be modeled as a rigid body, which results in a larger residual nutation than a flexible model though. The resid- ual nutation decreases with increasing absolute value of the initial sloshing angular height.

Neural Network Based Diagnostics of Actuator for an Attitude Control System

The objective of this paper is to develop a neural network-based residual generator to detect the fault in the actuators for a specific communication satellite in its attitude control system （ACS）. First, a dynamic multilayer perceptron network with dynamic neurons is used, these neurons correspond to a second order linear Infinite Impulse Response （IIR） filter and a nonlinear activation function with adjustable parameters. Second, the parameters from the network are adjusted to minimize a performance index specified by the output estimated error, with the given input-output data collected from the specific ACS. Then, the proposed dynamic neural network is trained and applied for detecting the faults injected to the wheel, which is the main actuator in the normal mode for the communication satellite. Then the performance and capabilities of the proposed network were tested and compared with a conventional model-based observer residual, showing the differences between these two methods, and indicating the benefit of the proposed algorithm to know the real status of the momentum wheel. Finally, the application of the methods in a satellite ground station is discussed.

Analysis and Testing of Microvibrations Produced by Momentum Wheel Assemblies

The microvibrations produced by momentum wheel assemblies（MWA） can degrade the performance of instruments with high pointing precision and stability on spacecraft.This paper concentrates on analyzing and testing the microvibrations produced by MWA.We analyze the disturbance sources produced by mass imbalance,structural mode,bearing irregularity and nonlinear stiffness,and random noise;then,test a well-balanced MWA by a highly sensitive measurement system consisting of a Kistler table and an optical tabletop.The results show that the test system has a resolution of less than 0.003 N in the frequency range of 3-300 Hz.The dynamic imbalance of the MWA cannot excite the radial rocking mode,but there are dynamic amplifications when the poly-harmonic disturbances intersect with the structural modes.Especially at high rotational speed（〉3 000 rev/min）,the main disturbance sources of the MWA come from the bearing irregularity interacting with radial translation mode in the high frequency range.Thus,bearing noise deserves more attention for the well-balanced MWA,and alternative of high quality bearings are proposed to reduce the microvibrations.