Currently,there is significant attention placed on the construction,management,and maintenance of large service bridges.Within the realm of bridge maintenance management,the utilization of detection and monitoring tec...Currently,there is significant attention placed on the construction,management,and maintenance of large service bridges.Within the realm of bridge maintenance management,the utilization of detection and monitoring technology is indispensable.By employing these technologies,we can effectively identify any structural defects within the bridge,promptly uncover unknown risks,proactively establish maintenance strategies,and prevent the rapid deterioration of bridge conditions.This article aims to explore the advantages of applying bridge monitoring and testing technology and to discuss various methods for implementing detection and monitoring technology throughout the construction,management,and maintenance phases of large bridges.Ultimately,this will contribute to ensuring the safe operation of large bridges.展开更多
As a crucial infrastructure in the transport system,the safe operation of bridges is directly related to all aspects of people’s daily lives.The development of bridge structural health monitoring technology and its a...As a crucial infrastructure in the transport system,the safe operation of bridges is directly related to all aspects of people’s daily lives.The development of bridge structural health monitoring technology and its application play an important role in ensuring the safety and extending the service life of bridges.This paper carries out in-depth research and analysis on the related technology of bridge structural health monitoring.Firstly,the existing monitoring technologies at home and abroad are sorted out,and the advantages and problems of various methods are compared and analyzed,including nondestructive testing,stress measurement,vibration characteristic identification,and other commonly used monitoring technologies.Secondly,the key technologies and equipment in the bridge health monitoring system,such as sensor technology,data acquisition,and processing technology,are introduced in detail.Finally,the development trend in the field of bridge health monitoring is prospected from both theoretical research and technical application.In the future,with the development of emerging technologies such as big data,cloud computing,and the Internet of Things,it is expected that bridge health monitoring with intelligent and systematic features will be more widely applied to provide a stronger guarantee for the safe and efficient operation of bridges.展开更多
A procedure to recognize individual discontinuities in rock mass from measurement while drilling(MWD)technology is developed,using the binary pattern of structural rock characteristics obtained from in-hole images for...A procedure to recognize individual discontinuities in rock mass from measurement while drilling(MWD)technology is developed,using the binary pattern of structural rock characteristics obtained from in-hole images for calibration.Data from two underground operations with different drilling technology and different rock mass characteristics are considered,which generalizes the application of the methodology to different sites and ensures the full operational integration of MWD data analysis.Two approaches are followed for site-specific structural model building:a discontinuity index(DI)built from variations in MWD parameters,and a machine learning(ML)classifier as function of the drilling parameters and their variability.The prediction ability of the models is quantitatively assessed as the rate of recognition of discontinuities observed in borehole logs.Differences between the parameters involved in the models for each site,and differences in their weights,highlight the site-dependence of the resulting models.The ML approach offers better performance than the classical DI,with recognition rates in the range 89%to 96%.However,the simpler DI still yields fairly accurate results,with recognition rates 70%to 90%.These results validate the adaptive MWD-based methodology as an engineering solution to predict rock structural condition in underground mining operations.展开更多
Emissions from mobile sources and stationary sources contribute to atmospheric pollution in China,and its components,which include ultrafine particles(UFPs),volatile organic compounds(VOCs),and other reactive gases,su...Emissions from mobile sources and stationary sources contribute to atmospheric pollution in China,and its components,which include ultrafine particles(UFPs),volatile organic compounds(VOCs),and other reactive gases,such as NH3and NOx,are the most harmful to human health.China has released various regulations and standards to address pollution from mobile and stationary sources.Thus,it is urgent to develop online monitoring technology for atmospheric pollution source emissions.This study provides an overview of the main progress in mobile and stationary source monitoring technology in China and describes the comprehensive application of some typical instruments in vital areas in recent years.These instruments have been applied to monitor emissions from motor vehicles,ships,airports,the chemical industry,and electric power generation.Not only has the level of atmospheric environment monitoring technology and equipment been improving,but relevant regulations and standards have also been constantly updated.Meanwhile,the developed instruments can provide scientific assistance for the successful implementation of regulations.According to the potential problem areas in atmospheric pollution in China,some research hotspots and future trends of atmospheric online monitoring technology are summarized.Furthermore,more advanced atmospheric online monitoring technology will contribute to a comprehensive understanding of atmospheric pollution and improve environmental monitoring capacity.展开更多
On the basis of the massive amount of published literature and the long-term practice of our research group in the field of prevention and control of rockburst,the research progress and shortcomings in understanding t...On the basis of the massive amount of published literature and the long-term practice of our research group in the field of prevention and control of rockburst,the research progress and shortcomings in understanding the rockburst phenomenon have been comprehensively in-vestigated.This study focuses on the occurrence mechanism and monitoring and early warning technology for rockburst in coal mines.Results showed that the prevention and control of rockburst had made significant progress.However,with the increasing mining depth,several unre-solved concerns remain challenging.From the in-depth research and analysis,it can be inferred that rockburst disasters involve three main problems,i.e.,the induction factors are complicated,the mechanism is still unclear,and the accuracy of the monitoring equipment and multi-source stereo monitoring technology is insufficient.The monitoring and warning standards of rockburst need to be further clarified and im-proved.Combined with the Internet of Things,cloud computing,and big data,a study of the trend of rockburst needs to be conducted.Further-more,the mechanism of multiphase and multi-field coupling induced by rockburst on a large scale needs to be explored.A multisystem and multiparameter integrated monitoring and early warning system and remote monitoring cloud platform for rockburst should be explored and developed.High-reliability sensing technology and equipment and perfect monitoring and early warning standards are considered to be the de-velopment direction of rockburst in the future.This research will help experts and technicians adopt effective measures for controlling rock-burst disasters.展开更多
The health monitoring for large-scale structures need to resolve a large number of difficulties,such as the data transmission and distributing information handling.To solve these problems,the technology of multi-agent...The health monitoring for large-scale structures need to resolve a large number of difficulties,such as the data transmission and distributing information handling.To solve these problems,the technology of multi-agent is a good candidate to be used in the field of structural health monitoring.A structural health monitoring system architecture based on multi-agent technology is proposed.The measurement system for aircraft airfoil is designed with FBG,strain gage,and corresponding signal processing circuit.The experiment to determine the location of the concentrate loading on the structure is carried on with the system combined with technologies of pattern recognition and multi-agent.The results show that the system can locate the concentrate loading of the aircraft airfoil at the accuracy of 91.2%.展开更多
The environmental conditions in China are still very serious. In the years to come, the mission for environmental treatment and protection, supervision,
Copper smelting furnaces are typically lined with magnesia-chromite refractories,which are exposed to multiple and complex stresses.The selection of the processing route,furnace type,and slag system is dictated by the...Copper smelting furnaces are typically lined with magnesia-chromite refractories,which are exposed to multiple and complex stresses.The selection of the processing route,furnace type,and slag system is dictated by the specific ore type available;which will determine the individual refractory wear.This paper evaluates the common refractory wear mechanisms as observed in the copper Peirce-Smith converter and in the copper anode furnace.The chemical factors include corrosion caused by fayalite type slag and sulphur supply,as well as by Cu-oxide attack.Changes in the temperature during the furnace operation(thermal shock)create stresses in the brick lining which can only be absorbed to a limited extent.Mechanical factors include erosion,caused primarily by the movement of the metal bath,slag and charging material,as well as stresses in the brickwork due to punching.Finally,improper lining procedures can also affect the service life.All these wear parameters lead to severe degeneration of the brick microstructure and a decreased lining life,and in the worst case overheated furnace structures and possibly dangerous hot spots or even breakouts.Therefore,a detailed investigation and understanding of the wear mechanisms through“post-mortem studies”together with thermochemical calculations by FactSageTM software is an important prerequisite for the refractory producer.Based on these research results,combined with specific process knowledge,appropriate brick lining solutions for copper processing furnaces can be recommended.In addition to the described efforts to investigate refractory wear and optimise lining qualities,it is also essential to monitor the process and the effect on the refractories to further improve both safety and process.For this purpose,technologies using sensors and novel digital solutions can be applied.展开更多
This paper aims to discuss the importance of patenting and publishing as an instrument of incentive to technological innovation in the petroleum chemistry area. The present study has examined the publications and the ...This paper aims to discuss the importance of patenting and publishing as an instrument of incentive to technological innovation in the petroleum chemistry area. The present study has examined the publications and the patent applications published from 1974 to 2014. A technological monitoring methodology for patents in drilling fluid with xanthan gum has been compared using profiles of patent application in the world, with emphasis on Industrial Property Databases available on the internet (INPI-Br, Derwent, Espacenet, Patent Scope and USPTO) with intention to assess the main inventors, applications, applications’ countries, the IPC classification, years of application and category of claims as well as discuss the importance of patents as a means of encouraging technological innovation of xanthan gum. The United States and China stand out both in relation to the publication of papers as well as in the amount of patent filing in scientific publications with the theme drilling fluid with additive xanthan gum classified by the authors’ country of origin. It is observed that Brazil and the US lead the ranking with 15 publications (about 23.1% of the total). Among the 72 institutions obtained as a result, both Petrobras SA and Universidade Federal do Rio de Janeiro, in Brazil, lead the world ranking, with 6 publications each;in relation to the areas of knowledge, it is observed that engineering stands out in the publication of papers and the areas of chemistry, engineering, energy fuels and polymer science are noticeable in numbers of patent applications. The analysis of patent filings in the periods proposed features a significant percentage associated with the classification C09K.展开更多
It is believed that the microseismicity induced by mining effect and gas gradient disturbance stress is a precursor to the essential characteristics of roadway unstability. In order to effectively identify and evaluat...It is believed that the microseismicity induced by mining effect and gas gradient disturbance stress is a precursor to the essential characteristics of roadway unstability. In order to effectively identify and evaluate the stability of coal roadways in the process of mine development and extraction, a microseismic monitoring system was deployed for the study of the stress evolution process, damage degree and distribution characteristics in the tailgate and headgate. The mine under study is the 62113 outburst working face of Xin Zhuangzi coalmine in Huainan mining area. The whole process of microfractures initiation,extension, interaction and coalescence mechanisms during the progressive failure processes of the coal rock within the delineated and typical event clusters were investigated by means of a two dimensional realistic failure process analysis code(RFPA2D-Flow). The results show that the microseismic events gradually create different-sized event clusters. The microseismicity of the tailgate is significantly higher than that of the headgate. The study indicates that the greater anomalous stress region matches the area where microfractures continuously develop and finally connect to each other and form a fissure zone.Due to the mine layout and stress concentration, the ruptured area is mainly located on the left shoulder of the tailgate roof. The potential anomalous stress region of the coal roadway obtained by numerical simulation is relatively in good agreement with the trend of spatial macro evolution of coal rock microfractures captured by the microseismic monitoring system. The research results can provide important basis for understanding instability failure mechanism of deep roadway and microseismic activity law in complex geologic conditions, and it ultimately can be used to guide the selection and optimization of reinforcement and protection scheme.展开更多
Deep-seated gas in seabed sediments migrates upwards from effect of external factors,which easily accumulates to form gasbags at interface of shallow coarse-fine sediments.Real-time monitoring of this process is impor...Deep-seated gas in seabed sediments migrates upwards from effect of external factors,which easily accumulates to form gasbags at interface of shallow coarse-fine sediments.Real-time monitoring of this process is important to predict disaster.However,there is still a lack of effective monitoring methods,so we attempt to apply multi-points pore water pressure monitoring technology when simulating forming and dissipation of gasbags in sediments through laboratory experiment.This study focuses on discussion of sensitivity of pore water pressure monitoring data,as well as typical changing characteristics and mechanisms of excess pore water pressure corresponding to crack generation,gasbag formation and gas release.It was found that the value of excess pore water pressure in sediments is negatively correlated with vertical distance between sensors and gas source,and the evolution of gasbag forming and dissipation has a good corresponding relationship with the change of excess pore water pressure.Gasbag formation process is divided into three stages:transverse crack development,longitudinal cavity expansion,and oblique crack development.Formation of gasbag begins with the transverse crack at the interface of coarse-fine sediments while excess pore water pressure attenuates rapidly and then drops,pressure remains almost unchanged when cavity expanses longitudinally,oblique crack appeared in final stage of gasbag evolution while excess pore water pressure accumulated and dissipated again.The variation curve of excess pore water pressure in gas release stage has saw-tooth fluctuation characteristics,and the value and time of pressure accumulation are also fluctuating,indicating the uncertainty and non-uniqueness of gas migration channels in sediments.展开更多
The progress in marine meteorology research achieved by scientists in China during the four-year period from 2003 to 2006 is summarized under four categories: marine disaster study, typhoon over the ocean, ocean-atmo...The progress in marine meteorology research achieved by scientists in China during the four-year period from 2003 to 2006 is summarized under four categories: marine disaster study, typhoon over the ocean, ocean-atmosphere monitoring technology, and ocean-atmosphere forecasting technology. Compared to the previous four years, many more first-hand datasets have been obtained and more scientific issues have been addressed. In particular, many contributions have been made by young scientists. A brief statement on the research strategy of marine meteorology in China for the coming years is given at the end.展开更多
This paper focuses on the underpinning-induced ground movement due to jet-grouting. Jet-grouting technique can cause distortions as a result of an inaccurate processing sequence and/or errors made at different stages ...This paper focuses on the underpinning-induced ground movement due to jet-grouting. Jet-grouting technique can cause distortions as a result of an inaccurate processing sequence and/or errors made at different stages of work execution. The aim of this paper is to determine the minimum value of such movement on the basis of the findings obtained at two similar construction sites located in the Historical Center of Moscow, considering that the maximum value is usually unpredictable. Numerical simulation of the process of soil eroding agrees well with the observational data at the current stage. It was found that the minimum value of deformations (only settlement was considered in this study) due to jetgrouting is no less than 2-3 mm. By contrast, the negative scenario of deformation due to foundation underpinning is clearly demonstrated. Also, this paper provides some general solutions for excavation supporting system as well as for underpinning design.展开更多
文摘Currently,there is significant attention placed on the construction,management,and maintenance of large service bridges.Within the realm of bridge maintenance management,the utilization of detection and monitoring technology is indispensable.By employing these technologies,we can effectively identify any structural defects within the bridge,promptly uncover unknown risks,proactively establish maintenance strategies,and prevent the rapid deterioration of bridge conditions.This article aims to explore the advantages of applying bridge monitoring and testing technology and to discuss various methods for implementing detection and monitoring technology throughout the construction,management,and maintenance phases of large bridges.Ultimately,this will contribute to ensuring the safe operation of large bridges.
文摘As a crucial infrastructure in the transport system,the safe operation of bridges is directly related to all aspects of people’s daily lives.The development of bridge structural health monitoring technology and its application play an important role in ensuring the safety and extending the service life of bridges.This paper carries out in-depth research and analysis on the related technology of bridge structural health monitoring.Firstly,the existing monitoring technologies at home and abroad are sorted out,and the advantages and problems of various methods are compared and analyzed,including nondestructive testing,stress measurement,vibration characteristic identification,and other commonly used monitoring technologies.Secondly,the key technologies and equipment in the bridge health monitoring system,such as sensor technology,data acquisition,and processing technology,are introduced in detail.Finally,the development trend in the field of bridge health monitoring is prospected from both theoretical research and technical application.In the future,with the development of emerging technologies such as big data,cloud computing,and the Internet of Things,it is expected that bridge health monitoring with intelligent and systematic features will be more widely applied to provide a stronger guarantee for the safe and efficient operation of bridges.
基金conducted under the illu MINEation project, funded by the European Union’s Horizon 2020 research and innovation program under grant agreement (No. 869379)supported by the China Scholarship Council (No. 202006370006)
文摘A procedure to recognize individual discontinuities in rock mass from measurement while drilling(MWD)technology is developed,using the binary pattern of structural rock characteristics obtained from in-hole images for calibration.Data from two underground operations with different drilling technology and different rock mass characteristics are considered,which generalizes the application of the methodology to different sites and ensures the full operational integration of MWD data analysis.Two approaches are followed for site-specific structural model building:a discontinuity index(DI)built from variations in MWD parameters,and a machine learning(ML)classifier as function of the drilling parameters and their variability.The prediction ability of the models is quantitatively assessed as the rate of recognition of discontinuities observed in borehole logs.Differences between the parameters involved in the models for each site,and differences in their weights,highlight the site-dependence of the resulting models.The ML approach offers better performance than the classical DI,with recognition rates in the range 89%to 96%.However,the simpler DI still yields fairly accurate results,with recognition rates 70%to 90%.These results validate the adaptive MWD-based methodology as an engineering solution to predict rock structural condition in underground mining operations.
基金supported by the National Key Research and Development Program of China(Nos.2016YFC0201000 and 2016YFC0201100)the Plan for Anhui Major Provincial Science&Technology Project(Nos.202203a07020004 and 202003a07020005)+1 种基金the National Natural Science Foundation of China(Nos.U2133212 and 42005108)the Science and Technological Fund of Anhui Province for Outstanding Youth(No.1808085J19)。
文摘Emissions from mobile sources and stationary sources contribute to atmospheric pollution in China,and its components,which include ultrafine particles(UFPs),volatile organic compounds(VOCs),and other reactive gases,such as NH3and NOx,are the most harmful to human health.China has released various regulations and standards to address pollution from mobile and stationary sources.Thus,it is urgent to develop online monitoring technology for atmospheric pollution source emissions.This study provides an overview of the main progress in mobile and stationary source monitoring technology in China and describes the comprehensive application of some typical instruments in vital areas in recent years.These instruments have been applied to monitor emissions from motor vehicles,ships,airports,the chemical industry,and electric power generation.Not only has the level of atmospheric environment monitoring technology and equipment been improving,but relevant regulations and standards have also been constantly updated.Meanwhile,the developed instruments can provide scientific assistance for the successful implementation of regulations.According to the potential problem areas in atmospheric pollution in China,some research hotspots and future trends of atmospheric online monitoring technology are summarized.Furthermore,more advanced atmospheric online monitoring technology will contribute to a comprehensive understanding of atmospheric pollution and improve environmental monitoring capacity.
基金This work was financially supported by the National Nat-ural Science Foundation of China(Nos.51634001,51774023,and 51904019).
文摘On the basis of the massive amount of published literature and the long-term practice of our research group in the field of prevention and control of rockburst,the research progress and shortcomings in understanding the rockburst phenomenon have been comprehensively in-vestigated.This study focuses on the occurrence mechanism and monitoring and early warning technology for rockburst in coal mines.Results showed that the prevention and control of rockburst had made significant progress.However,with the increasing mining depth,several unre-solved concerns remain challenging.From the in-depth research and analysis,it can be inferred that rockburst disasters involve three main problems,i.e.,the induction factors are complicated,the mechanism is still unclear,and the accuracy of the monitoring equipment and multi-source stereo monitoring technology is insufficient.The monitoring and warning standards of rockburst need to be further clarified and im-proved.Combined with the Internet of Things,cloud computing,and big data,a study of the trend of rockburst needs to be conducted.Further-more,the mechanism of multiphase and multi-field coupling induced by rockburst on a large scale needs to be explored.A multisystem and multiparameter integrated monitoring and early warning system and remote monitoring cloud platform for rockburst should be explored and developed.High-reliability sensing technology and equipment and perfect monitoring and early warning standards are considered to be the de-velopment direction of rockburst in the future.This research will help experts and technicians adopt effective measures for controlling rock-burst disasters.
基金supported by the Key Program of the National Science Foundation of China(50830201)Aviation Research Foundation(20060952)+1 种基金the National High Technology Research and Development of China(2007AA03Z117)the Natural Science Foundation of Jiansu Province(08kjd560009)
文摘The health monitoring for large-scale structures need to resolve a large number of difficulties,such as the data transmission and distributing information handling.To solve these problems,the technology of multi-agent is a good candidate to be used in the field of structural health monitoring.A structural health monitoring system architecture based on multi-agent technology is proposed.The measurement system for aircraft airfoil is designed with FBG,strain gage,and corresponding signal processing circuit.The experiment to determine the location of the concentrate loading on the structure is carried on with the system combined with technologies of pattern recognition and multi-agent.The results show that the system can locate the concentrate loading of the aircraft airfoil at the accuracy of 91.2%.
文摘The environmental conditions in China are still very serious. In the years to come, the mission for environmental treatment and protection, supervision,
文摘Copper smelting furnaces are typically lined with magnesia-chromite refractories,which are exposed to multiple and complex stresses.The selection of the processing route,furnace type,and slag system is dictated by the specific ore type available;which will determine the individual refractory wear.This paper evaluates the common refractory wear mechanisms as observed in the copper Peirce-Smith converter and in the copper anode furnace.The chemical factors include corrosion caused by fayalite type slag and sulphur supply,as well as by Cu-oxide attack.Changes in the temperature during the furnace operation(thermal shock)create stresses in the brick lining which can only be absorbed to a limited extent.Mechanical factors include erosion,caused primarily by the movement of the metal bath,slag and charging material,as well as stresses in the brickwork due to punching.Finally,improper lining procedures can also affect the service life.All these wear parameters lead to severe degeneration of the brick microstructure and a decreased lining life,and in the worst case overheated furnace structures and possibly dangerous hot spots or even breakouts.Therefore,a detailed investigation and understanding of the wear mechanisms through“post-mortem studies”together with thermochemical calculations by FactSageTM software is an important prerequisite for the refractory producer.Based on these research results,combined with specific process knowledge,appropriate brick lining solutions for copper processing furnaces can be recommended.In addition to the described efforts to investigate refractory wear and optimise lining qualities,it is also essential to monitor the process and the effect on the refractories to further improve both safety and process.For this purpose,technologies using sensors and novel digital solutions can be applied.
文摘This paper aims to discuss the importance of patenting and publishing as an instrument of incentive to technological innovation in the petroleum chemistry area. The present study has examined the publications and the patent applications published from 1974 to 2014. A technological monitoring methodology for patents in drilling fluid with xanthan gum has been compared using profiles of patent application in the world, with emphasis on Industrial Property Databases available on the internet (INPI-Br, Derwent, Espacenet, Patent Scope and USPTO) with intention to assess the main inventors, applications, applications’ countries, the IPC classification, years of application and category of claims as well as discuss the importance of patents as a means of encouraging technological innovation of xanthan gum. The United States and China stand out both in relation to the publication of papers as well as in the amount of patent filing in scientific publications with the theme drilling fluid with additive xanthan gum classified by the authors’ country of origin. It is observed that Brazil and the US lead the ranking with 15 publications (about 23.1% of the total). Among the 72 institutions obtained as a result, both Petrobras SA and Universidade Federal do Rio de Janeiro, in Brazil, lead the world ranking, with 6 publications each;in relation to the areas of knowledge, it is observed that engineering stands out in the publication of papers and the areas of chemistry, engineering, energy fuels and polymer science are noticeable in numbers of patent applications. The analysis of patent filings in the periods proposed features a significant percentage associated with the classification C09K.
基金Financial support for this work, provided by the National Natural Science Foundation of China (Nos.51674189,51304154,and 51327007)the Youth Science and technology new star of Shaanxi Province (No.2016KJXX-37)the Scientific research plan of Shaanxi Education Department (No.16JK1487)
文摘It is believed that the microseismicity induced by mining effect and gas gradient disturbance stress is a precursor to the essential characteristics of roadway unstability. In order to effectively identify and evaluate the stability of coal roadways in the process of mine development and extraction, a microseismic monitoring system was deployed for the study of the stress evolution process, damage degree and distribution characteristics in the tailgate and headgate. The mine under study is the 62113 outburst working face of Xin Zhuangzi coalmine in Huainan mining area. The whole process of microfractures initiation,extension, interaction and coalescence mechanisms during the progressive failure processes of the coal rock within the delineated and typical event clusters were investigated by means of a two dimensional realistic failure process analysis code(RFPA2D-Flow). The results show that the microseismic events gradually create different-sized event clusters. The microseismicity of the tailgate is significantly higher than that of the headgate. The study indicates that the greater anomalous stress region matches the area where microfractures continuously develop and finally connect to each other and form a fissure zone.Due to the mine layout and stress concentration, the ruptured area is mainly located on the left shoulder of the tailgate roof. The potential anomalous stress region of the coal roadway obtained by numerical simulation is relatively in good agreement with the trend of spatial macro evolution of coal rock microfractures captured by the microseismic monitoring system. The research results can provide important basis for understanding instability failure mechanism of deep roadway and microseismic activity law in complex geologic conditions, and it ultimately can be used to guide the selection and optimization of reinforcement and protection scheme.
基金The National Key Research and Development Program of China under contract No.2017YFC0307701the National Natural Science Foundation of China under contract No.41977234。
文摘Deep-seated gas in seabed sediments migrates upwards from effect of external factors,which easily accumulates to form gasbags at interface of shallow coarse-fine sediments.Real-time monitoring of this process is important to predict disaster.However,there is still a lack of effective monitoring methods,so we attempt to apply multi-points pore water pressure monitoring technology when simulating forming and dissipation of gasbags in sediments through laboratory experiment.This study focuses on discussion of sensitivity of pore water pressure monitoring data,as well as typical changing characteristics and mechanisms of excess pore water pressure corresponding to crack generation,gasbag formation and gas release.It was found that the value of excess pore water pressure in sediments is negatively correlated with vertical distance between sensors and gas source,and the evolution of gasbag forming and dissipation has a good corresponding relationship with the change of excess pore water pressure.Gasbag formation process is divided into three stages:transverse crack development,longitudinal cavity expansion,and oblique crack development.Formation of gasbag begins with the transverse crack at the interface of coarse-fine sediments while excess pore water pressure attenuates rapidly and then drops,pressure remains almost unchanged when cavity expanses longitudinally,oblique crack appeared in final stage of gasbag evolution while excess pore water pressure accumulated and dissipated again.The variation curve of excess pore water pressure in gas release stage has saw-tooth fluctuation characteristics,and the value and time of pressure accumulation are also fluctuating,indicating the uncertainty and non-uniqueness of gas migration channels in sediments.
基金supported by the National Natural Science Foundation of China (Grant Nos.U0733002, 40506008 and 40576013)
文摘The progress in marine meteorology research achieved by scientists in China during the four-year period from 2003 to 2006 is summarized under four categories: marine disaster study, typhoon over the ocean, ocean-atmosphere monitoring technology, and ocean-atmosphere forecasting technology. Compared to the previous four years, many more first-hand datasets have been obtained and more scientific issues have been addressed. In particular, many contributions have been made by young scientists. A brief statement on the research strategy of marine meteorology in China for the coming years is given at the end.
文摘This paper focuses on the underpinning-induced ground movement due to jet-grouting. Jet-grouting technique can cause distortions as a result of an inaccurate processing sequence and/or errors made at different stages of work execution. The aim of this paper is to determine the minimum value of such movement on the basis of the findings obtained at two similar construction sites located in the Historical Center of Moscow, considering that the maximum value is usually unpredictable. Numerical simulation of the process of soil eroding agrees well with the observational data at the current stage. It was found that the minimum value of deformations (only settlement was considered in this study) due to jetgrouting is no less than 2-3 mm. By contrast, the negative scenario of deformation due to foundation underpinning is clearly demonstrated. Also, this paper provides some general solutions for excavation supporting system as well as for underpinning design.