Monodisperse crosslinked poly(chloromethylstyrene-co-divinylbenzene)(poly(CMSt-co-DVB))microsphereswere prepared by distillation-precipitation copolymerization of chloromethylstyrene(CMSt)and divinylbenzene(DVB)inneat...Monodisperse crosslinked poly(chloromethylstyrene-co-divinylbenzene)(poly(CMSt-co-DVB))microsphereswere prepared by distillation-precipitation copolymerization of chloromethylstyrene(CMSt)and divinylbenzene(DVB)inneat acetonitrile.The polymer particles had clean surfaces due to the absence of any added stabilizer.The size of the particlesranges from 2.59 μm to 3.19 μm and with mono-dispersity around 1.002-1.014.The effects of monomer feed incopolymerization on the microsphere formation were described.The polymer microspheres were characterized by SEM andchlorinity elemental analysis.展开更多
Monodisperse titania glycolate submicrospheres were synthesized by a modified sol-gel route, in which ultrasonic treatment was introduced to improve the reaction efficiency. The as-prepared products were characterized...Monodisperse titania glycolate submicrospheres were synthesized by a modified sol-gel route, in which ultrasonic treatment was introduced to improve the reaction efficiency. The as-prepared products were characterized by means of Fourier transform infrared spectrum (FT-IR), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results indicate that the as-prepared products are titania glycolate submicrospheres with diameters of 230-330 nm. The average particle diameter is estimated to be about 280 nm. Ultrasonic treatment has an important influence on the morphology of the produced titania glycolates. After calcination at 450°C for 2 h, these titania glycolates were completely converted into anatase TiO2. The morphology of TiO2 particles was well reserved during the calcination process except for a reduction of 18% in the average particle size.展开更多
Monodispersed microsized copper oxalate particles were prepared in a segmented continuous flow tube reactor, and the effect of the main parameters such as organic additive agent, initial copper ions concentration, res...Monodispersed microsized copper oxalate particles were prepared in a segmented continuous flow tube reactor, and the effect of the main parameters such as organic additive agent, initial copper ions concentration, residence time, and segmented media on the final products were investigated experimentally. The obtained copper oxalate microsized particles were disc-like in the presence of citrate ligand,which was the shape inducer for the precipitated copper oxalate. Thermodynamic equilibrium diagrams of the Cu(Ⅱ)-oxalate-H_2O,Cu(Ⅱ)-oxalate-citrate-H_2O, and Cu(Ⅱ)-oxalate-EDTA-H_2O solution systems were drawn to estimate the possible copper species under the experimental conditions and to explain the formation mechanisms of copper oxalate particles in the segmented fluidic reactor. Both theoretical and experimental results indicated that the presence of chelating reagents such as citrate and EDTA had distinct effect on the evolution of particle shape. Air and kerosene were tested as media for the fluidic flow segmentation, and the latter was verified to better promote the growth of copper oxalate particles. The present study provides an easy method to prepare monodispersed copper oxalate microsized particles in a continuous scaling-up way, which can be utilized to prepare the precursor material for conductive inks.展开更多
Monodisperse crosslinked polystyrene (CPS) particles were prepared through the normal emulsion polymerization method by adding crosslinker--divinylbenzene (DVB) into the reaction system after polystyrene (PS) pa...Monodisperse crosslinked polystyrene (CPS) particles were prepared through the normal emulsion polymerization method by adding crosslinker--divinylbenzene (DVB) into the reaction system after polystyrene (PS) particles grew to -80% of the final size. When the amount of crosslinker DVB added was less than 6.17 wt% based on styrene, the prepared CPS particles were spherical and uniform and the size of the CPS particles could be predicted through the normal emulsion method. The glass transition temperature (Tg) of the prepared CPS particles was higher than that of un-crosslinked PS particles and, the more crosslinker that was added, the higher the Tg of CPS Particles. The prepared CPS particles had strong resistance to organic solvents.展开更多
Developing efficient and low-cost electrocatalysts is essential for the electroreduction of N_(2) to NH_(3).Here,highly monodispersed MoO_(3) clusters loaded on a coral-like CeO_(x)compound with abundant oxygen vacanc...Developing efficient and low-cost electrocatalysts is essential for the electroreduction of N_(2) to NH_(3).Here,highly monodispersed MoO_(3) clusters loaded on a coral-like CeO_(x)compound with abundant oxygen vacancies are successfully prepared by an impregnation-reduction method.The MoO_(3) clusters with small sizes of 2.6±0.5 nm are induced and anchored by the oxygen vacancies of CeO_(x),resulting in excellent nitrogen reduction reaction(NRR)performance.Additionally,the synergistic effects between MoO_(3) and CeO_(x)lead to a further improvement of the electrochemical performance.The as-prepared MoO_(3)-CeO_(x)catalyst shows an NH_(3) yield rate of 32.2 μg h^(-1) mg^(-1) cat and a faradaic efficiency of 7.04%at-0.75 V(vs.reversible hydrogen electrode)in 0.01 M Dulbecco’s Phosphate Buffered Saline.Moreover,it displays decent electrochemical stability over 30,000 s.Besides,the electrochemical NRR mechanism for MoO_(3)-CeO_(x)is investigated by in-situ Fourier transform infrared spectroscopy.N-H stretching,H-N-H bending,and N-N stretching are detected during the reaction,suggesting that an associative pathway is followed.This work provides an approach to designing and synthesizing potential electrocatalysts for NRR.展开更多
Magnetite (Fe3O4) nanoparticles with different sizes and shapes are synthesized by the thermal decomposition method. Two approaches, non-injection one-pot and hot-injection methods, are designed to investigate the g...Magnetite (Fe3O4) nanoparticles with different sizes and shapes are synthesized by the thermal decomposition method. Two approaches, non-injection one-pot and hot-injection methods, are designed to investigate the growth mechanism in detail. It is found that the size and shape of nanoparticles are determined by adjusting the precursor concentration and duration time, which can be well explained by the mechanism based on the LaMer model in our synthetic system. The monodisperse Fe3O4 nanoparticles have a mean diameter from 5nm to 16nm, and shape evolution from spherical to triangular and cubic. The magnetic properties are size-dependent, and Fe3O4 nanoparticles in small size about 5 nm exhibit superparamagnetie properties at room temperature and maximum saturation magnetization approaches to 78 emu/g, whereas Fe3O4 nanoparticles develop ferromagnetic properties when the diameter increases to about 16nm.展开更多
The emulsifier-free emulsion polymerization of N-hydroxymethyl acrylamide (NMA), methyl methacrylate (MMA) and styrene (St) was successfully carried out under microwave irradiation, and monodisperse polymeric mi...The emulsifier-free emulsion polymerization of N-hydroxymethyl acrylamide (NMA), methyl methacrylate (MMA) and styrene (St) was successfully carried out under microwave irradiation, and monodisperse polymeric microspheres were prepared. The experimental results show that the emulsifier-free emulsion polymerization under microwave irradiation has more rapid reaction rate, higher conversion and shorter induction time than the copolymerization with conventional heating. The apparent activation energies are 61.04 and 83.75 kJ/mol, respectively; the microspheres have spherical morphology, and the microspheres prepared by emulsifier-free emulsion polymerization under microwave irradiation are smaller, more uniform than those obtained with conventional heating.展开更多
Simultaneous achievement in high solid content and high microsphere yield is deemed a challenge in the fabrication of monodisperse microspheres by precipitation polymerization.We herein demonstrate that micro-sized mo...Simultaneous achievement in high solid content and high microsphere yield is deemed a challenge in the fabrication of monodisperse microspheres by precipitation polymerization.We herein demonstrate that micro-sized monodisperse poly(methacrylic monomer-divinylbenzene)microspheres containing epoxy,lauyl,carboxyl and hydroxyl functions can be fabricated by solvothermal precipitation copolymerization at 20%(mass)monomer loading with over 94%microsphere yield.The morphology and porosity of the obtained particles can be readily tuned by cosolvent-acetonitrile binary solvents.Addition of a small amount of cosolvent that has similar solubility parameter to that of the functional monomer can significantly improve the monodispersity of the obtained microspheres.When tetrahydrofuran was used as the co-solvent,the surface area of the highly porous microspheres achieved higher than 400 m^(2)·g^(-1).Solvothermal precipitation co-polymerization can be expected in scale-up fabrication of various monodisperse functional microspheres free of any surfactant and additive.展开更多
In order to obtain the bio-moleculel LDHs nanocomposites having regular crystal structure,three nanocomposites of layered double hydroxides and polyoxyethylene sulfates were prepared by ion-exchange method.TEM analysi...In order to obtain the bio-moleculel LDHs nanocomposites having regular crystal structure,three nanocomposites of layered double hydroxides and polyoxyethylene sulfates were prepared by ion-exchange method.TEM analysis reveals that the monodisperse rigid sphere of approximately 200 nm in diameter could be gotten when the intergallery anion was PEGS-400.Such monodisperse nanoparticle could be used as a promising precursor for preparing bio-moleculel LDHs nanocomposites.展开更多
The formation mechanism of monodisperse polymer latex particles in the emulsifier-free emulsion polymerizationof methyl methacrylate and butyl acrylate with potassium persulfate as initiator was investigated. A multi-...The formation mechanism of monodisperse polymer latex particles in the emulsifier-free emulsion polymerizationof methyl methacrylate and butyl acrylate with potassium persulfate as initiator was investigated. A multi-step formationmechanism for the monodisperse polymer particles was proposed. The nucleation mechanism is considered to be thecoagulation of the precursor particles by homogeneous nucleation when the primary particles reach a critical size with highsurface charge density and sufficient stability. It had been proved by a special experiment that the early latex particles formedby the coagulation were stable. The primary particles grow by absorbing monomers and radicals in the polymerization systemand then become colloidally unstable again due to the understandable decrease of particle surface charge density, which leadsto the aggregation of the growing particles and the formation of larger latex pedicles therefrom. Aner the nucleation period,the preferential aggregation of the smaller particles in the propagation process leads to the change of the particles towards auniform size and narrower particle size distribution. The coexistence and competition of homogeneous nucleation,coagulation, propagation and aggregation result in the increase of the polydispersity index (U = D_(43)/D_(10)) in the first Stage,then its decrease in the later stage because of the competition of propagation and aggregation, and the gradual formation ofthe monodisperse particles.展开更多
Lithium sulfur battery(LSB)is a promising energy storage system to meet the increasing energy demands for electric vehicles and smart grid,while its wide commercialization is severely inhibited by the"shuttle eff...Lithium sulfur battery(LSB)is a promising energy storage system to meet the increasing energy demands for electric vehicles and smart grid,while its wide commercialization is severely inhibited by the"shuttle effect"of polysulfides,low utilization of sulfur cathode,and safety of lithium anode.To overcome these issues,herein,monodisperse polar NiCo_(2)O_(4)nanoparticles decorated porous graphene aerogel composite(NCO-GA)is proposed.The aerogel composite demonstrates high conductivity,hierarchical porous structure,high chemisorption capacity and excellent electrocatalytic ability,which effectively inhibits the"shuttle effect",promotes the ion/electron transport and increases the reaction kinetics.The NCO-GA/S cathode exhibits high discharge specific capacity(1214.1 mAh g^(-1)at 0.1 C),outstanding rate capability(435.7 mAh g^(-1)at 5 C)and remarkable cycle stability(decay of 0.031%/cycle over 1000 cycles).Quantitative analyses show that the physical adsorption provided by GA mainly contributes to the capacity of NCO-GA/S at low rate,while the chemical adsorption provided by polar NiCo_(2)O_(4)contributes mainly to the capacity of NCO-GA/S with the increase of current density and cycling.This work provides a new strategy for the design of GA-based composite with synergistic adsorption and electrocatalytic activity for the potential applications in LSB and related energy fields.展开更多
A simple solvothermal approach was developed to synthesize uniform spherical monodisperse Ni nanoparticles, which can easily disperse in nonpolar solvents to form homogenous colloidal solution. The as-prepared sample ...A simple solvothermal approach was developed to synthesize uniform spherical monodisperse Ni nanoparticles, which can easily disperse in nonpolar solvents to form homogenous colloidal solution. The as-prepared sample was characterized by XRD, TEM, and FTIR. The results indicate that Ni nanoparticles have the structure of face-centered cube and a narrow distribution with a diameter of (3.5±0.5) nm. The FTIR spectrum reveals that the nanoparticles are coated with oleic acid. In the synthetic process, N2H4·H2O was used as a reducing agent and oleic acid as a surfactant. The probable formation mechanism of the spherical nanoparticles was also discussed.展开更多
In this paper, zinc acetate, manganese acetate and thiacetamide are used as raw materials to successfully synthesize monodispersed ZnS:Mn^2+ microspheres by using hydrothermal method and taking P123 surfactant as a ...In this paper, zinc acetate, manganese acetate and thiacetamide are used as raw materials to successfully synthesize monodispersed ZnS:Mn^2+ microspheres by using hydrothermal method and taking P123 surfactant as a template. The products were characterized by XRD, STEM, FT-IR and N2 adsorption-desorption. And the results show that the diameter of this microsphere is 1.0 μm or so, which is larger than that of ZnS microsphere without Mn^2+ doping, and it has monodispersion, smooth surface and uniform size, The doping of Mn^2+ does not obviously change the structure of monodispersed ZnS microsphere. The photoluminescence peak lies in a wide band ranging from 450 to 650 nm, and the microspheres emit orange light; with the increase of Mn^2+ concentration, fluorescence intensity of ZnS:Mn^2+ microsphere changes, and when the mole ratio of Mn^2+:Zn^2+ is 0.3:1, the fluorescence intensity is the strongest.展开更多
Monodisperse a-Fe2O3 particles with different particle size (ca. 62010 nm or 604 nm) have been successfully prepared by hydrothermal method in short periods. In this process, the crystal-growing inhibitor (DBS) favor...Monodisperse a-Fe2O3 particles with different particle size (ca. 62010 nm or 604 nm) have been successfully prepared by hydrothermal method in short periods. In this process, the crystal-growing inhibitor (DBS) favored the formation of monodisperse nanoparticles.展开更多
Spherical, monodispersed europium hydroxycarbonate particles wereobtained by homogeneous precipitation with urea in aqueous solution of Eu.(NO3)3at elevated temperature.The particles were readily converted to the unif...Spherical, monodispersed europium hydroxycarbonate particles wereobtained by homogeneous precipitation with urea in aqueous solution of Eu.(NO3)3at elevated temperature.The particles were readily converted to the uniformEu2O3 with average particle size of 50nm after calcined at 750℃.展开更多
An extremely facile and rapid solid phase route free of column chromatographic purification for the synthesis of the soluble monodisperse oligo(1, 4-phenyleneethynylene)s up to~60 was presented.
The present, paper contains a new composite material Co;O;UFP sol prepared by using W/O microemulsion method, and its size distribution, interracial and optical nonlincar properties are discussed. The method for the p...The present, paper contains a new composite material Co;O;UFP sol prepared by using W/O microemulsion method, and its size distribution, interracial and optical nonlincar properties are discussed. The method for the preparation of UFP sol is as follows: at first, CoCl;and DBS so-展开更多
Monodisperse poly (chloromethylstyrene divinylbenzene) particles were prepared by a two-step swelling method. It was demonstrated that the packings have comparative advantages for biopolymer separation with high colum...Monodisperse poly (chloromethylstyrene divinylbenzene) particles were prepared by a two-step swelling method. It was demonstrated that the packings have comparative advantages for biopolymer separation with high column efficiency, low interstitial volume and low back pressure to the packings prepared with suspension polymerization method. Using size exclusionchromatography and weak ion exchange chromatography as examples, it was shown that these packings could be modified chemically more easily than poly (styrene divinylbenzene) packings.展开更多
A series of thermodynamic parameters in formation of ultrafine monodispersed colloidal particles of Y(OH)CO3 were measured, estimated and calculated. The thermodynamic stability of Y(OH)CO3 colloidal particles was stu...A series of thermodynamic parameters in formation of ultrafine monodispersed colloidal particles of Y(OH)CO3 were measured, estimated and calculated. The thermodynamic stability of Y(OH)CO3 colloidal particles was studied and discussed by phenomenological model. It is suggested that ultrafine monodispersed colloidal particles of Y(OH)CO3 are stable only in a very narrow temporary supersaturation range ( 1<x<1 .08).展开更多
基金This work was funded by the financial support of the National Natural Science Foundation of China(Project No.20274018)Nankai University.
文摘Monodisperse crosslinked poly(chloromethylstyrene-co-divinylbenzene)(poly(CMSt-co-DVB))microsphereswere prepared by distillation-precipitation copolymerization of chloromethylstyrene(CMSt)and divinylbenzene(DVB)inneat acetonitrile.The polymer particles had clean surfaces due to the absence of any added stabilizer.The size of the particlesranges from 2.59 μm to 3.19 μm and with mono-dispersity around 1.002-1.014.The effects of monomer feed incopolymerization on the microsphere formation were described.The polymer microspheres were characterized by SEM andchlorinity elemental analysis.
文摘Monodisperse titania glycolate submicrospheres were synthesized by a modified sol-gel route, in which ultrasonic treatment was introduced to improve the reaction efficiency. The as-prepared products were characterized by means of Fourier transform infrared spectrum (FT-IR), transmission electron microscopy (TEM), powder X-ray diffraction (XRD), and scanning electron microscopy (SEM). The results indicate that the as-prepared products are titania glycolate submicrospheres with diameters of 230-330 nm. The average particle diameter is estimated to be about 280 nm. Ultrasonic treatment has an important influence on the morphology of the produced titania glycolates. After calcination at 450°C for 2 h, these titania glycolates were completely converted into anatase TiO2. The morphology of TiO2 particles was well reserved during the calcination process except for a reduction of 18% in the average particle size.
文摘Monodispersed microsized copper oxalate particles were prepared in a segmented continuous flow tube reactor, and the effect of the main parameters such as organic additive agent, initial copper ions concentration, residence time, and segmented media on the final products were investigated experimentally. The obtained copper oxalate microsized particles were disc-like in the presence of citrate ligand,which was the shape inducer for the precipitated copper oxalate. Thermodynamic equilibrium diagrams of the Cu(Ⅱ)-oxalate-H_2O,Cu(Ⅱ)-oxalate-citrate-H_2O, and Cu(Ⅱ)-oxalate-EDTA-H_2O solution systems were drawn to estimate the possible copper species under the experimental conditions and to explain the formation mechanisms of copper oxalate particles in the segmented fluidic reactor. Both theoretical and experimental results indicated that the presence of chelating reagents such as citrate and EDTA had distinct effect on the evolution of particle shape. Air and kerosene were tested as media for the fluidic flow segmentation, and the latter was verified to better promote the growth of copper oxalate particles. The present study provides an easy method to prepare monodispersed copper oxalate microsized particles in a continuous scaling-up way, which can be utilized to prepare the precursor material for conductive inks.
基金National Basic Research Program of China(Grant No:2006CB932601)the Scientific Research Foundation for Returned Overseas Chinese Scholar,Ministry of Education
文摘Monodisperse crosslinked polystyrene (CPS) particles were prepared through the normal emulsion polymerization method by adding crosslinker--divinylbenzene (DVB) into the reaction system after polystyrene (PS) particles grew to -80% of the final size. When the amount of crosslinker DVB added was less than 6.17 wt% based on styrene, the prepared CPS particles were spherical and uniform and the size of the CPS particles could be predicted through the normal emulsion method. The glass transition temperature (Tg) of the prepared CPS particles was higher than that of un-crosslinked PS particles and, the more crosslinker that was added, the higher the Tg of CPS Particles. The prepared CPS particles had strong resistance to organic solvents.
基金financially supported by the National Key Research and Development Program of China(2017YFA0206500)NSFC(Grant Nos.21673198,91934303,21621091)。
文摘Developing efficient and low-cost electrocatalysts is essential for the electroreduction of N_(2) to NH_(3).Here,highly monodispersed MoO_(3) clusters loaded on a coral-like CeO_(x)compound with abundant oxygen vacancies are successfully prepared by an impregnation-reduction method.The MoO_(3) clusters with small sizes of 2.6±0.5 nm are induced and anchored by the oxygen vacancies of CeO_(x),resulting in excellent nitrogen reduction reaction(NRR)performance.Additionally,the synergistic effects between MoO_(3) and CeO_(x)lead to a further improvement of the electrochemical performance.The as-prepared MoO_(3)-CeO_(x)catalyst shows an NH_(3) yield rate of 32.2 μg h^(-1) mg^(-1) cat and a faradaic efficiency of 7.04%at-0.75 V(vs.reversible hydrogen electrode)in 0.01 M Dulbecco’s Phosphate Buffered Saline.Moreover,it displays decent electrochemical stability over 30,000 s.Besides,the electrochemical NRR mechanism for MoO_(3)-CeO_(x)is investigated by in-situ Fourier transform infrared spectroscopy.N-H stretching,H-N-H bending,and N-N stretching are detected during the reaction,suggesting that an associative pathway is followed.This work provides an approach to designing and synthesizing potential electrocatalysts for NRR.
基金Supported by the National Natural Science Foundation of China under Grant Nos 51571135,11274214 and 61434002the Special Funds of Shanxi Scholars Program under Grant No IRT1156+1 种基金Collaborative Innovation Center for Shanxi Advanced Permanent Materials and Technologythe Special Funds of the Ministry of Education of China under Grant No 20121404130001
文摘Magnetite (Fe3O4) nanoparticles with different sizes and shapes are synthesized by the thermal decomposition method. Two approaches, non-injection one-pot and hot-injection methods, are designed to investigate the growth mechanism in detail. It is found that the size and shape of nanoparticles are determined by adjusting the precursor concentration and duration time, which can be well explained by the mechanism based on the LaMer model in our synthetic system. The monodisperse Fe3O4 nanoparticles have a mean diameter from 5nm to 16nm, and shape evolution from spherical to triangular and cubic. The magnetic properties are size-dependent, and Fe3O4 nanoparticles in small size about 5 nm exhibit superparamagnetie properties at room temperature and maximum saturation magnetization approaches to 78 emu/g, whereas Fe3O4 nanoparticles develop ferromagnetic properties when the diameter increases to about 16nm.
基金Funded by the Natural Science Foundation of Hubei Province (2010CDB04603)the Educational Commission of Hubei Province (Q200610004)
文摘The emulsifier-free emulsion polymerization of N-hydroxymethyl acrylamide (NMA), methyl methacrylate (MMA) and styrene (St) was successfully carried out under microwave irradiation, and monodisperse polymeric microspheres were prepared. The experimental results show that the emulsifier-free emulsion polymerization under microwave irradiation has more rapid reaction rate, higher conversion and shorter induction time than the copolymerization with conventional heating. The apparent activation energies are 61.04 and 83.75 kJ/mol, respectively; the microspheres have spherical morphology, and the microspheres prepared by emulsifier-free emulsion polymerization under microwave irradiation are smaller, more uniform than those obtained with conventional heating.
基金National Natural Science Foundation of China(51873079)for financial support。
文摘Simultaneous achievement in high solid content and high microsphere yield is deemed a challenge in the fabrication of monodisperse microspheres by precipitation polymerization.We herein demonstrate that micro-sized monodisperse poly(methacrylic monomer-divinylbenzene)microspheres containing epoxy,lauyl,carboxyl and hydroxyl functions can be fabricated by solvothermal precipitation copolymerization at 20%(mass)monomer loading with over 94%microsphere yield.The morphology and porosity of the obtained particles can be readily tuned by cosolvent-acetonitrile binary solvents.Addition of a small amount of cosolvent that has similar solubility parameter to that of the functional monomer can significantly improve the monodispersity of the obtained microspheres.When tetrahydrofuran was used as the co-solvent,the surface area of the highly porous microspheres achieved higher than 400 m^(2)·g^(-1).Solvothermal precipitation co-polymerization can be expected in scale-up fabrication of various monodisperse functional microspheres free of any surfactant and additive.
文摘In order to obtain the bio-moleculel LDHs nanocomposites having regular crystal structure,three nanocomposites of layered double hydroxides and polyoxyethylene sulfates were prepared by ion-exchange method.TEM analysis reveals that the monodisperse rigid sphere of approximately 200 nm in diameter could be gotten when the intergallery anion was PEGS-400.Such monodisperse nanoparticle could be used as a promising precursor for preparing bio-moleculel LDHs nanocomposites.
文摘The formation mechanism of monodisperse polymer latex particles in the emulsifier-free emulsion polymerizationof methyl methacrylate and butyl acrylate with potassium persulfate as initiator was investigated. A multi-step formationmechanism for the monodisperse polymer particles was proposed. The nucleation mechanism is considered to be thecoagulation of the precursor particles by homogeneous nucleation when the primary particles reach a critical size with highsurface charge density and sufficient stability. It had been proved by a special experiment that the early latex particles formedby the coagulation were stable. The primary particles grow by absorbing monomers and radicals in the polymerization systemand then become colloidally unstable again due to the understandable decrease of particle surface charge density, which leadsto the aggregation of the growing particles and the formation of larger latex pedicles therefrom. Aner the nucleation period,the preferential aggregation of the smaller particles in the propagation process leads to the change of the particles towards auniform size and narrower particle size distribution. The coexistence and competition of homogeneous nucleation,coagulation, propagation and aggregation result in the increase of the polydispersity index (U = D_(43)/D_(10)) in the first Stage,then its decrease in the later stage because of the competition of propagation and aggregation, and the gradual formation ofthe monodisperse particles.
基金supported by the National Natural Science Foundation of China(51974209)the Outstanding Doctoral Award Fund in Shanxi Province(20202017)。
文摘Lithium sulfur battery(LSB)is a promising energy storage system to meet the increasing energy demands for electric vehicles and smart grid,while its wide commercialization is severely inhibited by the"shuttle effect"of polysulfides,low utilization of sulfur cathode,and safety of lithium anode.To overcome these issues,herein,monodisperse polar NiCo_(2)O_(4)nanoparticles decorated porous graphene aerogel composite(NCO-GA)is proposed.The aerogel composite demonstrates high conductivity,hierarchical porous structure,high chemisorption capacity and excellent electrocatalytic ability,which effectively inhibits the"shuttle effect",promotes the ion/electron transport and increases the reaction kinetics.The NCO-GA/S cathode exhibits high discharge specific capacity(1214.1 mAh g^(-1)at 0.1 C),outstanding rate capability(435.7 mAh g^(-1)at 5 C)and remarkable cycle stability(decay of 0.031%/cycle over 1000 cycles).Quantitative analyses show that the physical adsorption provided by GA mainly contributes to the capacity of NCO-GA/S at low rate,while the chemical adsorption provided by polar NiCo_(2)O_(4)contributes mainly to the capacity of NCO-GA/S with the increase of current density and cycling.This work provides a new strategy for the design of GA-based composite with synergistic adsorption and electrocatalytic activity for the potential applications in LSB and related energy fields.
基金the Research Fund of Shaanxi Key Laboratory(Nos.04JS04 and 05JS50)the Natural Science Foundation of Shaanxi Province, China(No.2005B19)the Significant Special Found of "13115" S & T Innovation Project of Shaanxi Province, China(No.2007ZDKG-61)
文摘A simple solvothermal approach was developed to synthesize uniform spherical monodisperse Ni nanoparticles, which can easily disperse in nonpolar solvents to form homogenous colloidal solution. The as-prepared sample was characterized by XRD, TEM, and FTIR. The results indicate that Ni nanoparticles have the structure of face-centered cube and a narrow distribution with a diameter of (3.5±0.5) nm. The FTIR spectrum reveals that the nanoparticles are coated with oleic acid. In the synthetic process, N2H4·H2O was used as a reducing agent and oleic acid as a surfactant. The probable formation mechanism of the spherical nanoparticles was also discussed.
基金the Fujian Hi-tech Project Foundation (No. 2004H008)
文摘In this paper, zinc acetate, manganese acetate and thiacetamide are used as raw materials to successfully synthesize monodispersed ZnS:Mn^2+ microspheres by using hydrothermal method and taking P123 surfactant as a template. The products were characterized by XRD, STEM, FT-IR and N2 adsorption-desorption. And the results show that the diameter of this microsphere is 1.0 μm or so, which is larger than that of ZnS microsphere without Mn^2+ doping, and it has monodispersion, smooth surface and uniform size, The doping of Mn^2+ does not obviously change the structure of monodispersed ZnS microsphere. The photoluminescence peak lies in a wide band ranging from 450 to 650 nm, and the microspheres emit orange light; with the increase of Mn^2+ concentration, fluorescence intensity of ZnS:Mn^2+ microsphere changes, and when the mole ratio of Mn^2+:Zn^2+ is 0.3:1, the fluorescence intensity is the strongest.
文摘Monodisperse a-Fe2O3 particles with different particle size (ca. 62010 nm or 604 nm) have been successfully prepared by hydrothermal method in short periods. In this process, the crystal-growing inhibitor (DBS) favored the formation of monodisperse nanoparticles.
文摘Spherical, monodispersed europium hydroxycarbonate particles wereobtained by homogeneous precipitation with urea in aqueous solution of Eu.(NO3)3at elevated temperature.The particles were readily converted to the uniformEu2O3 with average particle size of 50nm after calcined at 750℃.
基金financial supported by the National Science Fund for Distinguished Young Scholars(No.20225414).
文摘An extremely facile and rapid solid phase route free of column chromatographic purification for the synthesis of the soluble monodisperse oligo(1, 4-phenyleneethynylene)s up to~60 was presented.
基金Supported by the National Natural Science Foundation of China
文摘The present, paper contains a new composite material Co;O;UFP sol prepared by using W/O microemulsion method, and its size distribution, interracial and optical nonlincar properties are discussed. The method for the preparation of UFP sol is as follows: at first, CoCl;and DBS so-
文摘Monodisperse poly (chloromethylstyrene divinylbenzene) particles were prepared by a two-step swelling method. It was demonstrated that the packings have comparative advantages for biopolymer separation with high column efficiency, low interstitial volume and low back pressure to the packings prepared with suspension polymerization method. Using size exclusionchromatography and weak ion exchange chromatography as examples, it was shown that these packings could be modified chemically more easily than poly (styrene divinylbenzene) packings.
文摘A series of thermodynamic parameters in formation of ultrafine monodispersed colloidal particles of Y(OH)CO3 were measured, estimated and calculated. The thermodynamic stability of Y(OH)CO3 colloidal particles was studied and discussed by phenomenological model. It is suggested that ultrafine monodispersed colloidal particles of Y(OH)CO3 are stable only in a very narrow temporary supersaturation range ( 1<x<1 .08).