Catalytic combustion of toluene over Pd-based monolithic catalysts with a novel washcoat Ce_(0.8)Zr_(0.15)La_(0.05)O_δ

Two novel washcoats Ce0.8Zr0.15La0.05Oδ and Ce0.8Zr0.2O2 was prepared by an impregnation method, which acted as a host for the active Pd component to prepare Pd/Ce0.8Zr0.15La0.05Oδ/substrate and Pd/Ce0.8Zr0.2O2/substrate monolithic catalysts for toluene combustion. The washcoats was characterized by X-ray diffraction (XRD), Raman spectroscopy, Brunauner-Emmett-Teller (BET), and H2-temperature-programmed reduction (H2-TPR). The result indicated that both the washcoats had strong vibration-shock resistance according to ultrasonic test. Doping La3+ into CeO2-ZrO2 solid solution could generate more oxygen vacancies, and could inhibit the sinter of CeO2-ZrO2 solid solution when calcined at high temperatures (800, 900 and 1000 °C). The washcoat Ce0.8Zr0.15La0.05Oδ had much better redox properties. The reductive temperature of Ce4+ species shifted to low temperature by 60 °C when the washcoats calcined at high temperatures (800, 900 and 1000 °C). The Pd/Ce0.8Zr0.15La0.05Oδ/substrate monolithic catalyst calcination at 500 °C had the best catalytic activity and the 95% toluene conversion at a temperature as low as 190 °C. When calcined at low temperature (500 and 700 °C), the catalytic activity has little improvement, however, when calcined at high temperature, the catalytic activity of Pd/Ce0.8Zr0.15La0.05Oδ/substrate monolithic catalysts had significant improvement. As catalyst washcoat, the Ce0.8Zr0.15La0.05Oδ had better thermal stability than the washcoat Ce0.8Zr0.2O2, the developed Pd/Ce0.8Zr0.15La0.05Oδ/ substrate monolithic catalyst in this work was promising for eliminating Volatile organic compounds.

Acidic Montmorillonite/Cordierite Monolithic Catalysts for Cleavage of Cumene Hydroperoxide

In this work,a series of acidic montmorillonite/cordierite monolithic catalysts were prepared by a coating method using silica sol as the binder.The morphology and structure of the acidic montmorillonite/cordierite samples were characterized by means of X-ray diffraction(XRD),N_2 adsorption/desorption isotherms,and scanning electron microscope(SEM).The cleavage of cumene hydroperoxide(CHP) in a conventional fixed-bed reactor was chosen as a model reaction to evaluate the catalytic activity of the monolithic catalysts.The influences of acidic montmorillonite loading,reaction temperature.CHP concentration,and weight hourly space velocity(WHSV) on the catalytic activity and selectivity of phenol were studied.The results indicated that the obtained acidic montmorillonite/cordierite monolithic catalysts were firm and compact,and the loading of acidic montmorillonite was found to reach 40%(by mass) after three coating operations.The surface area of acidic montmorillonite/cordierite catalysts increases greatly as acidic montmorillonite loading increases due to higher surface area of acidic montmorillonite.Under the optimal reaction conditions(acidic montmorillonite loading of 32.5%(by mass),temperature of 80 ℃,a mass ratio of CHP to acetone of 1:3,and WHSV of CHP of 90 h^(-1)),the conversion of CHP can reach 100%,and the selectivity of phenol is up to 99.8%.

Particle/metal-based monolithic catalysts dual-bed reactor with beds-interspace supplementary oxygen:Construction and performance for oxidative coupling of methane

A novel particle/metal-based monolithic catalysts dual-bed reactor with beds-interspace supplementary oxygen is constructed comprising of the upper-layer 5 wt%Na2WO4-2 wt%Mn/SiO2 particle catalyst and the under-layer 3 wt%Ce-5 wt%Na2WO4-2 wt%Mn/SBA-15/Al2O3/FeCrA1 metal-based monolithic catalyst as well as a side tube in the interspaces of two layers for supplementing 02. The reaction performance of oxidative coupling of methane （OCM） in the dual-bed reactor system is evaluated. The effects of the reaction parameters such as feed CH4/O2 ratio, reaction temperature and side tube feed 02 flowrate on the catalytic performance are investigated. The results indicate that the suggested mode of dual-bed reactor exhibits an excellent performance for OCM. CH4 conversion of 33.2%, C2H4 selectivity of 46.5% and C2 yield of 22.5% could be obtained, which have been increased by 6.4%, 4.1% and 5.5%, respectively, as compared with 5 wt%Na2WO4-2 wt%Mn/SiO2 particle catalyst in a single-bed reactor and increased by 10.7%, 31.9% and 17.7%, respectively, as compared with 3 wt%Ce-5 wt%Na2WO4-2 wt%Mn/SBA-15/Al2O3/FeCrA1 metal-based monolithic catalyst in a single-bed reactor. The effective promotion of OCM performance in the reactor would supply a valuable reference for the industrialization of OCM process.

Oxidative coupling of methane in a dual-bed reactor comprising of particle/cordierite monolithic catalysts

A dual-bed reactor was constructed comprising of a 5%Na2WO4-2%Mn/SiO2 particle catalyst and a 4%Ce-5%Na2WO4-2%Mn/SiO2 /cordierite monolithic catalyst.The reaction performance of the oxidative coupling of methane （OCM） over the dual-bed reactor system was evaluated.The effects of the bed height and operation mode,as well as the reaction parameters such as reaction temperature,CH4/O2 ratio and flowrate of feed gas,on the catalytic performance were investigated.The results indicated that the suggested dual-bed reactor exhibited a good performance for the OCM reaction when the feed gases firstly passed through the particle catalyst bed and then to the monolithic catalyst bed.A CH4 conversion of 38.2% and a C2H4 selectivity of 43.3% could be obtained using the dual-bed reactor with a particle catalyst bed height of 10 mm and a monolithic catalyst bed height of 50 mm.Both the CH4 conversion and C2H4 selectivity have increased by 2.5% and 12.8%,respectively,as compared with the 5%Na2WO4-2%Mn/SiO2 particle catalyst in a conventional single-bed reactor and by 12.9% and 23.0%,respectively,as compared with the 4%Ce-5%Na2WO4-2%Mn/SiO2 /cordierite monolithic catalyst in a single-bed reactor.The catalytic performance of the OCM in the dual-bed reactor system has been improved remarkably.

Preparation,Structure Characterization and Hydrodesulfurization Performance of B-Ni_2P/SBA-15/Cordierite Monolithic Catalysts

A series of B-Ni2P/SBA-15/cord monolithic catalysts were prepared by coating the slurry of the B-Ni2P/SBA-15 precursors on a pretreated cordierite support, and followed by temperature-programmed reduction in a H2 flow. The samples were characterized by X-ray diffraction （XRD） and N2 adsorption-desorption technique. The catalytic activities for the hydrodesulfurization （HDS） of dibenzothiophene （DBT） were evaluated. The results showed that Ni2P phase was present in all B-Ni2P/SBA-1 5/cord monolithic catalysts. The specific surface areas （SBET） of the B-Ni2P/SBA-15/cord monolithic catalysts was first increased to 167 m2· g-1, and then decreased to 155 m2· g-1 with the increase of boron contents. The catalytic activity also showed the similar trend with the increase of boron contents. The 1.75% （by mass） B-Ni2P/SBA-15/cord monolithic catalysts exhibited the highest DBT conversion of 98.4% at 380 ℃. The cordierite-based monolithic catalysts showed better low temperature sensitivity for HDS of DBT in comparison with the particle catalysts. Moreover, two HDS routes, direct desulfurization （DDS） and hydrogenation （HYD）, proceeded independently over B-Ni2P/SBA-15/cord monolithic catalysts and the main pathway was DDS.

Catalytic Combustion of Methane over Co_(1-x)Mg_(x)O/Al_(2)O_(3)/FeCrAl Monolithic Catalysts

A series of CoxMgxO/Al2O3/FeCrAl catalysts （x=0-1） were prepared. The structures of the catalysts were characterized using XRD, SEM, and TPR analyses. The catalytic activity of the catalysts for methane combustion was evaluated in a continuous flow microreactor. The results indicated that the active washcoats adhered well on the FeCrAl foils. The phases in the catalysts were Co--xMgxO solid solutions, α-Al2O3, and γ-Al2O3. The surface particle size of the catalysts varied with variations in the molar ratios of Co to Mg. The Co component of the Co1_xMgxO/Al2O3/FeCrAl catalysts played an important role in the catalytic activity for methane combustion. In the Co1-xMgxO/AluO3/FeCrAl series catalyst （x=0.2-0.8）, the catalytic activity in terms of x was in the order of 0.5〉0.2〉0.8 under the experimental conditions. The presence of Mg in these catalysts could promote the thermal stability to a large extent. There were strong interactions between the Co1-xMgxO oxides and the AluO3/FeCrAl supports.

Numerical simulation of fixed bed reactor for oxidative coupling of methane over monolithic catalyst

A three-dimensional geometric model was set up for the oxidative coupling of methane(OCM) fixed bed reactor loaded with Na_3PO_4-Mn/SiO_2/cordierite monolithic catalyst,and an improved Stansch kinetic model was established to calculate the OCM reactions using the computational fluid dynamics method and Fluent software.The simulation conditions were completely the same with the experimental conditions that the volume velocity of the reactant is 80 ml·min^(-1) under standard state,the CH_4/O_2 ratio is 3 and the temperature and pressure is800 ℃ and 1 atm,respectively.The contour of the characteristic parameters in the catalyst bed was analyzed,such as the species mass fractions,temperature,the heat flux on side wall surface,pressure,fluid density and velocity.The results showed that the calculated values matched well with the experimental values on the conversion of CH4 and the selectivity of products(C_2H_6,C_2H_4,CO,CO_2 and H_2) in the reactor outlet with an error range of±4%.The mass fractions of CH_4 and O_2 decreased from 0.600 and 0.400 at the catalyst bed inlet to 0.445 and0.120 at the outlet,where the mass fractions of C_2H_6,C_2H_4,CO and CO_2 were 0.0245,0.0460,0.0537 and 0.116,respectively.Due to the existence of laminar boundary layer,the mass fraction contours of each species bent upwards in the vicinity of the boundary layer.The volume of OCM reaction was changing with the proceeding of reaction,and the total moles of products were greater than reactants.The flow field in the catalyst bed maintained constant temperature and pressure.The fluid density decreased gradually from 2.28 kg·m^(-3) at the inlet of the catalyst bed to 2.18 kg·m^(-3) at the outlet of the catalyst bed,while the average velocity magnitude increased from 0.108 m·s-1 to 0.120 m·s^(-1).

Preparation of Pd/c-Al_(2)O_(3)/nickel foam monolithic catalyst and its performance for selective hydrogenation in a rotating packed bed reactor

Selective hydrogenation plays an important role in chemical industries,yet its selectivity is usually limited by the mass transfer.In this work,the enhanced hydrogenation selectivity was achieved in a rotating packed bed(RPB)reactor with excellent mass transfer efficiency.Aiming to be used under the centrifugal filed,a monolithic catalyst Pd/c-Al_(2)O_(3)/nickel foam suiting for the shape and size of the rotor of RPB reactor was prepared by the electrophoretic deposition method.The mechanical strength of the catalyst can meet the requirement of high centrifugal force in the RPB.The hydrogenation selectivity in the RPB reactor using the 3-methyl-1-pentyn-3-ol hydrogenation system was 3–8 times higher than that in a stirred tank reactor under similar conditions.This work proves the feasibility of intensifying the selectivity of hydrogenation process in the RPB reactor.

Metal-Support Interactions on Ag/Co_(3)O_(4)Nanowire Monolithic Catalysts Promoting Catalytic Soot Combustion

Tuning metal-support interactions(MSIs)is an important strategy in heterogeneous catalysis to realize the desirable metal dispersion and redox ability of metal catalysts.Herein,we use pre-reduced Co_(3)O_(4)nanowires(Co-NWs)in situ grown on monolithic Ni foam substrates to support Ag catalysts(Ag/Co-NW-R)for soot combustion.The macroporous structure of Ni foam with crossed Co_(3)O_(4)nanowires remarkably increases the soot-catalyst contact effi ciency.Our characterization results demonstrate that Ag species exist as Ag 0 because of the equation Ag^(+)+Co^(2+)=Ag^(0)+Co^(3+),and the pre-reduction treatment enhances interactions between Ag and Co_(3)O_(4).The number of active oxygen species on the Ag-loaded catalysts is approximately twice that on the supports,demonstrating the signifi cant role of Ag sites in generating active oxygen species.Additionally,the strengthened MSI on Ag/Co-NW-R further improves this number by increasing metal dispersion and the intrinsic activity determined by the turnover frequency of these oxygen species for soot oxidation compared with the catalyst without pre-reduction of Co-NW(Ag/Co-NW).In addition to high activity,Ag/Co-NW-R exhibits high catalytic stability and water resistance.The strategy used in this work might be applicable in related catalytic systems.

Toluene Combustion over Pd-Ce_(0.4)Zr_(0.6)O_2 Directly Washcoated Monolithic Catalysts

A Ce0.4Zr0.6O2 washcoat was prepared using an impregnation method, which acted as a host for the active Pd component to prepare a Pd-Ce0.4Zr0.6O2/substrate monolithic catalyst for toluene combustion. The catalyst was characterized by scanning electron microscopy （SEM）, Raman spectroscopy, Brunauner-Emmett-Teller （BET）, and carbon monoxide tonperature-programmed reduction （CO-TPR）. It was found that the washcoat had strong vibration-shock resistance according to an ultrasonic test. The Pd-Ce0.4Zr0.6O2/substrate monolithic catalyst calcined at 400 ℃ showed 95% toluene conversion at a temperature as low as 210 ℃. Furthermore, the lowest temperature for 95% toluene conversion was increased by 40℃ after the catalyst calcined at 900℃, indicating that the catalyst had good thermal stability. The results revealed that the developed catalyst in this study was promising for eliminating volatile organic compounds （VOCs）.

Autothermal reforming of biogas over a monolithic catalyst

This study focused on measurement of the autothermal reforming of biogas over a Ni based monolithic catalyst. The effects of the steam/CH4 （S/C） ratio, O2/CH4 （O2/C） ratio and temperature were investigated. The CH4 conversions were higher under all examined temperatures than the equilibrium conversion calculated using the blank outlet temperature, because the catalyst layer was heated by the exothermic catalytic partial oxidation reaction. The CH 4conversion increased with increasing O2/C ratio. Moreover, the CH4 conversion was higher than the equilibrium conversion calculated using the blank outlet temperature for O2/C〉0.42 and reached about 100% at O2/C=0.55. However, the hydrogen concentration decreased for O2/C〉0.45 because hydrogen was combusted to steam in the presence of excess oxygen. On the other hand, the hydrogen and CO2 concentrations increased and the CO concentration decreased with increasing SIC ratio. As a result, it was found that the highest hydrogen concentrations and CH4 conversions were attained at the O2/C ratios of 0.45-0.55 and the SIC ratios of 1.5-2.5. Moreover, the H2/CO ratio could also be controlled in the range from about 2 to 3.5 to give at least 90% CH4 conversion, by regulating the O2/C or S/C ratios.

Effects of porous oxide layer on performance of Pd-based monolithic catalysts for 2-ethylanthraquinone hydrogenation

Pd/oxide/cordierite monolithic catalysts(oxide = Al_2O_3, SiO_2 and SiO_2\\Al_2O_3) were prepared by the impregnation method. The results of ICP, XRD, SEM–EDX, XPS and N_2 adsorption–desorption measurements revealed that the Pd penetration depth increased with increasing the thickness of oxide layer, and the catalysts with Al_2O_3 layers had the larger pore size than those with SiO_2 and SiO_2\\Al_2O_3 layers. Catalytic hydrogenation of 2-ethylanthraquinone(eA Q), a key step of the H_2O_2 production by the anthraquinone process, over the various monolithic catalysts(60 °C, atmosphere pressure) showed that the monolithic catalyst with the moderate thickness of Al_2O_3 layer(about 6 μm) exhibited the highest conversion of e AQ(99.1%) and hydrogenation efficiency(10.0 g·L^(-1)). This could be ascribed to the suitable Pd penetration depth and the larger pore size, which provides a balance between the distribution of Pd and accessibility of active sites by the reactants.

Controllable synthesis of MnO_(2)/iron mesh monolithic catalyst and its significant enhancement for toluene oxidation

A series of monolithic MnO_(2)/iron mesh (IM) catalysts for oxidation of toluene were successfully prepared by using in situ hydrothermal growth.MnO_(2)can grow firmly on the IM substrates surface with a shedding rate of only 0.14%.Due to the highest O_(ads) and high-valent Mn^(4+) and Fe^(3+) elements,the temperature at 50% and 90% toluene conversion (T_(50%) and T_(90%)) was 252 and 265℃,respectively for the best performance catalyst (hydrothermal temperature of 80℃,hydrothermal time of 12 h,and precursor manganese ion concentration of 0.03 mol/L).The catalysts also presented good water resistance and cycle performance.In-situ DRIFTS results suggesting that toluene was first rapid transformed into the reaction intermediate species (benzoate species) and then converted to CO_(2)and H_(2)O.Therefore,this work provides a new direction for the research and application of IM-based monolithic catalysts.

Catalytic combustion of VOCs on Pt/CuMnCe and Pt/CeY honeycomb monolithic catalysts

The metal oxides CuMnCe and CeY washcoats on cordierite were prepared using an impregnation method, and then used as support for the active Pt component to prepare the Pt/CuMnCe and Pt/CeY monolithic catalysts for the deep oxidation of VOCs. In comparison with the Pt/CeY, CuMnCe, and CeY monolithic catalysts, the Pt/CuMnCe monolithic catalyst shows an excellent performance for toluene,ethyl acetate,and n-hexane oxidation and the Tis low to 216, 200 and 260 ℃,respectively. The active components Pt/PtO and CuMnCe result in a better synergetic interaction, which promote the catalyst reducibility, increase the oxygen mobility, and enhance the adsorption and activation of organic molecules.

Pd single-atom monolithic catalyst: Functional 3D structure and unique chemical selectivity in hydrogenation reaction

Regulating the selectivity of catalysts in selective hydrogenation reactions at the atomic level is highly desirable but remains a grand challenge. Here we report a simple and practical strategy to synthesize a monolithic single-atom catalyst(SAC) with isolated Pd atoms supported on bulk nitrogen-doped carbon foams(Pd-SAs/CNF). Moreover, we demonstrate that the single-atom Pd sites with unique electronic structure endow Pd-SAs/CNF with an isolated site effect, leading to excellent activity and selectivity in 4-nitrophenylacetylene semi-hydrogenation reaction. In addition, benefiting from the great integrity and excellent mechanical strength, monolithic Pd-SAs/CNF catalyst is easy to separate from the reaction system for conducting the subsequent recycling. The cyclic test demonstrates the excellent reusability and stability of monolithic Pd-SAs/CNF catalyst.The discovery of isolated site effect provides a new approach to design highly selective catalysts. And the development of monolithic SACs provides new opportunities to advance the practical applications of single-atom catalysts.

Preparation and characterizations of Ce-Cu-O monolithic catalysts for ethyl acetate catalytic combustion

Ce-Cu-O monolithic catalysts were prepared by using Ce0.9Cu0.1O1.9 solid solution or nitrate as precursors,and their catalytic performance for the combustion of ethyl acetate were studied.The catalysts calcined at a low temperature showed high catalytic activities.When calcined at high temperatures,the catalyst with Ce0.9Cu0.1O1.9 solid solution as precursor remained a high activity,while the catalyst with metal nitrates as precursors exhibited a suppressed reactivity.Therefore,the catalyst prepared with th...

Preparation of MnO2 decorated Co3Fe1Ox powder/monolithic catalyst with improved catalytic activity for toluene oxidation

In this paper, KMnO4 was used to pre-treat Co3 Fe-layered double hydroxides(LDH) precursor to prepare MnO2 decorated Co3Fe1Ox catalyst. The toluene oxidation performance of the catalyst was investigated systematically. The optimized 0.1 Mn CF-LDO catalyst exhibited the best catalytic performance, and the temperatures of 50% and 90% toluene conversion( T50 and T90) were 218 and 243 ℃, respectively. The apparent activation energy( Ea) was 31.6 k J/mol. The characterization results showed that the pre-redox reaction by KMnO4 could increase the specific surface area, Co^3+ species amount and oxygen defect concentration of the catalyst, which are the main reason of the improved toluene catalytic activity. Besides, this method was also applied to enhance toluene oxidation of iron mesh based monolithic catalyst. The 0.1 Mn CF-LDO/Iron mesh(IM) catalyst showed a 90% toluene conversion at around 316 ℃ which was much lower than that of without MnO2 addition(359 ℃). In addition, the water resistant of all the catalysts was studied as well, all the samples showed relatively good water resistance. The toluene conversion still remained to be over > 80% even in the presence of 10 vol.% water vapor.

Honeycomb-shaped Pt Sn Na/y-Al2O3/cordierite monolithic catalyst with improved stability and selectivity for propane dehydrogenation

novel honeycomb-shaped Pt Sn Na/g-Al2 O3/cordierite monolithic catalyst（Pt 0.5%, Sn 0.9%, Na 1.0%,relative to Al2 O3 weight） was developed and its catalytic performances in propane dehydrogenation were tested and compared with the classical granule catalyst with same Pt, Sn and Na contents under the conditions of 0.1 MPa, 590C, C3 H8/H2 at 3/1（molar ratio） and gas hourly space velocity（GHSV） at155 h-1. Interestingly, despite the generated coke amount and exposed Pt fraction, the honey combshaped structure of monolithic catalyst exerted important influences on its catalytic activities and led to the advanced catalytic performances over the granule catalyst.

Effect of Fe_2O_3 Loading Amount on Catalytic Properties of Monolithic Fe_2O_3/Ce_(0.67)Zr_(0.33)O_2-Al_2O_3 Catalyst for Methane Combustion

Ce0.67Zr0.33O2-Al2O3 solid solution was prepared by the co-precipitation method. Fe2O3-based catalysts supported on the solid solution were obtained by the impregnation method. The article revealed that the optimal loading amount of Fe2O3 on Ce0.67Zr0.33 O2-Al2O3 in our experimental condition for catalytic combustion of methane was 8% （ mass fraction）. The prepared catalysts were characterized by BET, TPR, XRD analyses, and their catalytic activity was investigated after being calcined at 873 K and after being aged in water gas at 1273 K. When the loading amount of Fe203 was 8% （ mass fraction）, the catalyst held the highest activity, and the best temperature speciality and thermal stability. The complete-conversion temperature of methane for fresh and aged sample was 788 and 838 K, respectively. The range between the light-off temperature and the complete-conversion temperature was only 15 K. The characterization results of XRD indicated that Fe2O3 was well dispersed on the Ce0.67Zr0.33O2-Al2O3 matrix. The results of BET and TPR were in good harmony with the catalytic activity results.

Low-temperature and stable CO oxidation of Co_(3)O_(4)/TiO_(2) monolithic catalysts

Highly efficient Co_(3)O_(4)/TiO_(2) monolithic catalysts with enhanced stability were in-situ grown on Ti mesh for CO oxidation,which could completely oxidize CO at 120℃.The comprehensive catalytic performance is competitive to some noble metal catalysts and conventional Co_(3)O_(4) powder catalysts,which holds great potential toward industrial applications.Meanwhile,the in-situ synthesis strategy of Co_(3)O_(4)/TiO_(2) monolithic catalysts on flexible mesh substrate in this work can be extended to the development of a variety of oxide-based monolithic catalysts towards diverse catalysis applications.