Research on a Monte Carlo global variance reduction method based on an automatic importance sampling method

Global variance reduction is a bottleneck in Monte Carlo shielding calculations.The global variance reduction problem requires that the statistical error of the entire space is uniform.This study proposed a grid-AIS method for the global variance reduction problem based on the AIS method,which was implemented in the Monte Carlo program MCShield.The proposed method was validated using the VENUS-Ⅲ international benchmark problem and a self-shielding calculation example.The results from the VENUS-Ⅲ benchmark problem showed that the grid-AIS method achieved a significant reduction in the variance of the statistical errors of the MESH grids,decreasing from 1.08×10^(-2) to 3.84×10^(-3),representing a 64.00% reduction.This demonstrates that the grid-AIS method is effective in addressing global issues.The results of the selfshielding calculation demonstrate that the grid-AIS method produced accurate computational results.Moreover,the grid-AIS method exhibited a computational efficiency approximately one order of magnitude higher than that of the AIS method and approximately two orders of magnitude higher than that of the conventional Monte Carlo method.

Monte Carlo method for evaluation of surface emission rate measurement uncertainty

The aim of this study is to evaluate the uncertainty of 2πα and 2πβ surface emission rates using the windowless multiwire proportional counter method.This study used the Monte Carlo method (MCM) to validate the conventional Guide to the Expression of Uncertainty in Measurement (GUM) method.A dead time measurement model for the two-source method was established based on the characteristics of a single-channel measurement system,and the voltage threshold correction factor measurement function was indirectly obtained by fitting the threshold correction curve.The uncertainty in the surface emission rate was calculated using the GUM method and the law of propagation of uncertainty.The MCM provided clear definitions for each input quantity and its uncertainty distribution,and the simulation training was realized with a complete and complex mathematical model.The results of the surface emission rate uncertainty evaluation for four radioactive plane sources using both methods showed the uncertainty’s consistency E_(n)<0.070 for the comparison of each source,and the uncertainty results of the GUM were all lower than those of the MCM.However,the MCM has a more objective evaluation process and can serve as a validation tool for GUM results.

Emergent topological ordered phase for the Ising-XY model revealed by cluster-updating Monte Carlo method

The two-component cold atom systems with anisotropic hopping amplitudes can be phenomenologically described by a two-dimensional Ising-XY coupled model with spatial anisotropy.At low temperatures,theoretical predictions[Phys.Rev.A 72053604(2005)]and[arXiv:0706.1609]indicate the existence of a topological ordered phase characterized by Ising and XY disorder but with 2XY ordering.However,due to ergodic difficulties faced by Monte Carlo methods at low temperatures,this topological phase has not been numerically explored.We propose a linear cluster updating Monte Carlo method,which flips spins without rejection in the anisotropy limit but does not change the energy.Using this scheme and conventional Monte Carlo methods,we succeed in revealing the nature of topological phases with half-vortices and domain walls.In the constructed global phase diagram,Ising and XY-type transitions are very close to each other and differ significantly from the schematic phase diagram reported earlier.We also propose and explore a wide range of quantities,including magnetism,superfluidity,specific heat,susceptibility,and even percolation susceptibility,and obtain consistent and reliable results.Furthermore,we observed first-order transitions characterized by common intersection points in magnetizations for different system sizes,as opposed to the conventional phase transition where Binder cumulants of various sizes share common intersections.The critical exponents of different types of phase transitions are reasonably fitted.The results are useful to help cold atom experiments explore the half-vortex topological phase.

Method“Monte Carlo”in healthcare

In public health,simulation modeling stands as an invaluable asset,enabling the evaluation of new systems without their physical implementation,experimentation with existing systems without operational adjustments,and testing system limits without real-world repercussions.In simulation modeling,the Monte Carlo method emerges as a powerful yet underutilized tool.Although the Monte Carlo method has not yet gained widespread prominence in healthcare,its technological capabilities hold promise for substantial cost reduction and risk mitigation.In this review article,we aimed to explore the transformative potential of the Monte Carlo method in healthcare contexts.We underscore the significance of experiential insights derived from simulated experimentation,especially in resource-constrained scenarios where time,financial constraints,and limited resources necessitate innovative and efficient approaches.As public health faces increasing challenges,incorporating the Monte Carlo method presents an opportunity for enhanced system construction,analysis,and evaluation.

Evaluation of Particle Properties of MgO/TiO2 Material by Monte Carlo Simulation Method

The simulation by the Monte Carlo method executed by the software PyPENELOPE proved effective to specify the particle propagation characteristics by calculating the absorption fractions, backscattering and transmission of electrons and secondary photons under the incidence of 0.5 to 20 KeV range of primary electrons. More than 99.9% of the primary electrons were transmitted in the 125 nm thick MgO/TiO2 material at 20 KeV. This occurred because several interactions took place in the transmitted primary irradiation such as characteristic, fluorescence, and bremsstrahlung produced when of the occupation of the KL3, KL2, KM3, and KM2 shell and sub-shell of titanium and magnesium which are the elements with a high atomic number in the material. The transmission particle characteristic of this material is therefore an indicator capable of improving the electrical performance and properties of the sensor.

Monte Carlo方法在移动通信可靠性分析中的应用

文章主要探讨Monte Carlo方法在移动通信可靠性分析中的应用,并引入重要抽样技术对Monte Carlo方法进行优化。首先,文章介绍Monte Carlo方法的基本原理及其在移动通信可靠性分析中的应用。其次,引入重要抽样技术对该方法进行优化。最后,利用优化网络工程工具(Optimized Network Engineering Tools,OPNET)模拟平台构建相应的移动通信网络模型,并对比Monte Carlo方法和本文研究的优化方法在不同样本数量下的性能差异。结果表明,重要抽样技术的引入显著提高了Monte Carlo方法在移动通信可靠性分析中的准确性和效率,减少了方差,验证了该方法在移动通信可靠性分析中的有效性和实用性。

基于Monte-Carlo仿真的恒应力加速试验方案模拟评价

为了保证可靠性加速试验方案的正确性和可行性,提出基于仿真的模拟评价方法。以最具代表性的Weibull寿命分布产品的恒应力加速寿命试验为例,以代表试验结果准确性和稳定性的指标——中位寿命估计值渐进方差的均值和标准差作为评价指标,通过Monte-Carlo仿真模拟生成失效数据,对不同试验方案的统计精度和稳定性进行评价,为加速寿命试验优化设计的工程实现提供了思路和实例验证。

基于Monte Carlo的风力机叶片强度可靠性分析

随着风力机应用数量增多,以及应用规模扩大,风力机叶片可靠度的保证尤为关键。利用Monte Carlo客观分析叶片强度可靠性,为叶片安全状态长效维持提供依据,实现风力机的平稳运转。该文在介绍Monte Carlo的基础上,分析风力机类型及其叶片状态和叶片参数,并以有限元模型构建的方式分析风力机叶片载荷及强度,最后探究基于Monte Carlo的风力机叶片可靠性。

非对称循环弯曲变形再结晶组织的Monte Carlo模拟

利用Monte Carlo方法模拟了非对称循环弯曲变形工艺下的静态再结晶过程,分析了循环道次、退火温度等工艺参数对板材表面及厚度方向上组织演变和晶粒尺寸分布的影响,并基于模拟数据,建立了静态再结晶晶粒尺寸预测模型。结果表明,在450~750℃的退火温度范围内,随着循环道次增加、退火温度升高以及与板材表面距离的减小,静态再结晶晶粒尺寸显著减小。当达到7个循环道次后,板材表面的晶粒尺寸趋于稳定;而在11个循环道次后,厚度方向的晶粒尺寸均匀化,并细化为等轴晶。此外,通过将模拟结果和金相实验得到的再结晶晶粒尺寸进行对比,模型的预测结果和实验数据吻合度高,所建模型的有效性和准确性得到验证。

Machine learning-enhanced Monte Carlo and subset simulations for advanced risk assessment in transportation infrastructure

The maintenance of safety and dependability in rail and road embankments is of utmost importance in order to facilitate the smooth operation of transportation networks.This study introduces a comprehensive methodology for soil slope stability evaluation,employing Monte Carlo Simulation(MCS)and Subset Simulation(SS)with the"UPSS 3.0 Add-in"in MS-Excel.Focused on an 11.693-meter embankment with a soil slope(inclination ratio of 2H:1V),the investigation considers earthquake coefficients(kh)and pore water pressure ratios(ru)following Indian zoning requirements.The chance of slope failure showed a considerable increase as the Coefficient of Variation(COV),seismic coefficients(kh),and pore water pressure ratios(ru)experienced an escalation.The SS approach showed exceptional efficacy in calculating odds of failure that are notably low.Within computational modeling,the study optimized the worst-case scenario using ANFIS-GA,ANFIS-GWO,ANFIS-PSO,and ANFIS-BBO models.The ANFIS-PSO model exhibits exceptional accuracy(training R2=0.9011,RMSE=0.0549;testing R2=0.8968,RMSE=0.0615),emerging as the most promising.This study highlights the significance of conducting thorough risk assessments and offers practical insights into evaluating and improving the stability of soil slopes in transportation infrastructure.These findings contribute to the enhancement of safety and reliability in real-world situations.

Chord length sampling correction analysis for dispersion fuel in Monte Carlo simulation

Dispersion fuels,knowned for their excellent safety performance,are widely used in advanced reactors,such as hightemperature gas-cooled reactors.Compared with deterministic methods,the Monte Carlo method has more advantages in the geometric modeling of stochastic media.The explicit modeling method has high computational accuracy and high computational cost.The chord length sampling(CLS)method can improve computational efficiency by sampling the chord length during neutron transport using the matrix chord length?s probability density function.This study shows that the excluded-volume effect in realistic stochastic media can introduce certain deviations into the CLS.A chord length correction approach is proposed to obtain the chord length correction factor by developing the Particle code based on equivalent transmission probability.Through numerical analysis against reference solutions from explicit modeling in the RMC code,it was demonstrated that CLS with the proposed correction method provides good accuracy for addressing the excludedvolume effect in realistic infinite stochastic media.

Health risk assessment of trace metal(loid)s in agricultural soils based on Monte Carlo simulation coupled with positive matrix factorization model in Chongqing, southwest China

This study aimed to investigate the pollution characteristics, source apportionment, and health risks associated with trace metal(loid)s(TMs) in the major agricultural producing areas in Chongqing, China. We analyzed the source apportionment and assessed the health risk of TMs in agricultural soils by using positive matrix factorization(PMF) model and health risk assessment(HRA) model based on Monte Carlo simulation. Meanwhile, we combined PMF and HRA models to explore the health risks of TMs in agricultural soils by different pollution sources to determine the priority control factors. Results showed that the average contents of cadmium(Cd), arsenic (As), lead(Pb), chromium(Cr), copper(Cu), nickel(Ni), and zinc(Zn) in the soil were found to be 0.26, 5.93, 27.14, 61.32, 23.81, 32.45, and 78.65 mg/kg, respectively. Spatial analysis and source apportionment analysis revealed that urban and industrial sources, agricultural sources, and natural sources accounted for 33.0%, 27.7%, and 39.3% of TM accumulation in the soil, respectively. In the HRA model based on Monte Carlo simulation, noncarcinogenic risks were deemed negligible(hazard index <1), the carcinogenic risks were at acceptable level(10^(-6)<total carcinogenic risk ≤ 10^(-4)), with higher risks observed for children compared to adults. The relationship between TMs, their sources, and health risks indicated that urban and industrial sources were primarily associated with As, contributing to 75.1% of carcinogenic risks and 55.7% of non-carcinogenic risks, making them the primary control factors. Meanwhile, agricultural sources were primarily linked to Cd and Pb, contributing to 13.1% of carcinogenic risks and 21.8% of non-carcinogenic risks, designating them as secondary control factors.

Optimization of the Use of Spherical Targets for Point Cloud Registration Using Monte Carlo Simulation

Registrations based on the manual placement of spherical targets are still being employed by many professionals in the industry.However,the placement of those targets usually relies solely on personal experience without scientific evidence supported by numerical analysis.This paper presents a comprehensive investigation,based on Monte Carlo simulation,into determining the optimal number and positions for efficient target placement in typical scenes consisting of a pair of facades.It demonstrates new check-up statistical rules and geometrical constraints that can effectively extract and analyze massive simulations of unregistered point clouds and their corresponding registrations.More than 6×10^(7) sets of the registrations were simulated,whereas more than IOO registrations with real data were used to verify the results of simulation.The results indicated that using five spherical targets is the best choice for the registration of a large typical registration site consisting of two vertical facades and a ground,when there is only a box set of spherical targets available.As a result,the users can avoid placing extra targets to achieve insignificant improvements in registration accuracy.The results also suggest that the higher registration accuracy can be obtained when the ratio between the facade-to-target distance and target-to-scanner distance is approximately 3:2.Therefore,the targets should be placed closer to the scanner rather than in the middle between the facades and the scanner,contradicting to the traditional thought. Besides,the results reveal that the accuracy can be increased by setting the largest projected triangular area of the targets to be large.

Enhancing Precision in Radiotherapy Delivery: Validating Monte Carlo Simulation Models for 6 MV Elekta Synergy Agility LINAC Photon Beam Using Two Models of the GAMOS Code

The most crucial requirement in radiation therapy treatment planning is a fast and accurate treatment planning system that minimizes damage to healthy tissues surrounding cancer cells. The use of Monte Carlo toolkits has become indispensable for research aimed at precisely determining the dose in radiotherapy. Among the numerous algorithms developed in recent years, the GAMOS code, which utilizes the Geant4 toolkit for Monte Carlo simula-tions, incorporates various electromagnetic physics models and multiple scattering models for simulating particle interactions with matter. This makes it a valuable tool for dose calculations in medical applications and throughout the patient’s volume. The aim of this present work aims to vali-date the GAMOS code for the simulation of a 6 MV photon-beam output from the Elekta Synergy Agility linear accelerator. The simulation involves mod-eling the major components of the accelerator head and the interactions of the radiation beam with a homogeneous water phantom and particle information was collected following the modeling of the phase space. This space was po-sitioned under the X and Y jaws, utilizing three electromagnetic physics mod-els of the GAMOS code: Standard, Penelope, and Low-Energy, along with three multiple scattering models: Goudsmit-Saunderson, Urban, and Wentzel-VI. The obtained phase space file was used as a particle source to simulate dose distributions (depth-dose and dose profile) for field sizes of 5 × 5 cm2 and 10 × 10 cm2 at depths of 10 cm and 20 cm in a water phantom, with a source-surface distance (SSD) of 90 cm from the target. We compared the three electromagnetic physics models and the three multiple scattering mod-els of the GAMOS code to experimental results. Validation of our results was performed using the gamma index, with an acceptability criterion of 3% for the dose difference (DD) and 3 mm for the distance-to-agreement (DTA). We achieved agreements of 94% and 96%, respectively, between simulation and experimentation for the three electromagnetic physics models and three mul-tiple scattering models, for field sizes of 5 × 5 cm2 and 10 × 10 cm2 for depth-dose curves. For dose profile curves, a good agreement of 100% was found between simulation and experimentation for the three electromagnetic physics models, as well as for the three multiple scattering models for a field size of 5 × 5 cm2 at 10 cm and 20 cm depths. For a field size of 10 × 10 cm2, the Penelope model dominated with 98% for 10 cm, along with the three multiple scattering models. The Penelope model and the Standard model, along with the three multiple scattering models, dominated with 100% for 20 cm. Our study, which compared these different GAMOS code models, can be crucial for enhancing the accuracy and quality of radiotherapy, contributing to more effective patient treatment. Our research compares various electro-magnetic physics models and multiple scattering models with experimental measurements, enabling us to choose the models that produce the most reli-able results, thereby directly impacting the quality of simulations. This en-hances confidence in using these models for treatment planning. Our re-search consistently contributes to the progress of Monte Carlo simulation techniques in radiation therapy, enriching the scientific literature.

Monte Carlo Simulations of Doping Properties of a Spin-3/2 Ising Nanotube

The effect of spin-1 impurities doping on the magnetic properties of a spin-3/2 Ising nanotube is investigated using Monte Carlo simulations within the Blume-Emery-Griffiths model in the presence of an external magnetic field. The thermal behaviors of the order parameters and different macroscopic instabilities as well as the hysteretic behavior of the material are examined in great detail as a function of the dopant density. It is found that the impurities concentration affects all the system magnetic properties generating for some specific values, compensation points and multi-cycle hysteresis. Doping conditions where the saturation/remanent magnetization and coercive field of the investigated material can be modified for permanent or soft magnets synthesis purpose are discussed.

Evaluation of the Reliability of a System: Approach by Monte Carlo Simulation and Application

The objective of this paper is to evaluate the reliability of a system in its different states (absence of failures, partial failure and total failure) and to propose actions to improve this reliability by an approach based on Monte Carlo simulation. It consists of a probabilistic evaluation based on Markov Chains. In order to achieve this goal, the functionalities of Markov Chains and Monte Carlo simulation steps are deployed. The application is made on a production system. .

基于多元最小二乘-Monte Carlo模型在土石方测量中的应用研究

针对目前土方测量效率低,计算土方量精度差的现状,提出利用无人机进行土方测量,利用MATLAB软件进行编程,构建多元最小二乘-Monte Carlo模型对土方量进行计算,与传统的GNSS-RTK数据采集方法以及利用南方CASS软件计算结果对比,结果表明,利用无人机采集数据效率高,多元最小二乘-Monte Carlo模型取得结果精度更高。

基于Monte Carlo随机模拟算法的电动汽车无序充电负荷计算模型

为了有效降低电动汽车无序充电负荷对于电力系统稳定性的影响,研究了基于Monte Carlo随机模拟算法的计算模型。综合考虑用户充电行为各参数的概率密度,使得构建的模型更精确。分析了不同的充电策略对于充电负荷曲线的影响,并利用综合策略模型使得用户的充电成本更低,利用基于Levy飞行策略的改进麻雀算法对综合充电策略的权重系数进行寻优计算,以使得用户的成本和电网稳定均能获得不错的效果。在此基础上,提出利用双层优化模型对模型进一步优化,综合考虑用户满意度和电力波动的情况,结果表明改进后的模型,可以节省充电成本15.9%,降低电力系统负荷峰谷差约10.1%。

基于Monte-Carlo迭代求解策略的局部社区发现算法

针对现有的局部社区发现算法因采用贪心策略进行社区扩张而导致的过早收敛和查全率低的问题,提出一种基于Monte-Carlo迭代求解策略的局部社区发现算法。首先,在每轮迭代的社区扩张阶段,根据节点对社区紧密度增益的贡献比例为所有邻接候选节点赋予选择概率,并结合此概率,再随机选择一个节点加入社区。然后,为避免随机选择导致扩张方向偏离目标社区,根据社区质量变化情况判断本轮迭代中是否触发节点淘汰机制。若触发,计算各个已加入社区节点与社区内其他节点的相似度和,根据相似度和的倒数赋予淘汰概率,并结合此概率,再随机淘汰一个节点。最后,在给定数量的最近迭代轮次中,根据社区规模是否增加判断是否继续迭代。在三个真实的网络数据集上进行实验,相较于局部紧密度扩展(LTE)算法、Clauset算法、加权共同邻居节点(CNWNN)算法和模糊相似关系(FSR)算法,所提算法的局部社区发现结果的F-score值分别提升了32.75、17.31、20.66和25.51个百分点,且能够有效避免查询节点在社区中所处位置对局部社区发现结果的影响。

基于AHP-Monte Carlo的液化天然气罐区风险评估模型研究

为实现化工企业风险分级管控合理化、系统化,基于“五高”风险理论与安全管理学理论,以某液化天然气(LNG)罐区为例,选取高风险设备、高风险场所、高风险物质、高风险工艺、高风险人员5类评价指标建立LNG罐区风险评估模型。使用层次分析法(AHP)定量计算各风险要素权重。利用蒙特卡罗(Monte Carlo)方法,结合事故统计结果,对罐区风险后果值进行累积概率分布,运用模拟软件分析得出LNG罐区风险值分布规律。建立了LNG罐区风险评估模型,实现罐区风险的快速分级。结果表明:基于AHP-Monte Carlo的风险评估模型将储罐风险等级划分为4级,可以有针对性地为LNG企业提供储罐风险分级依据,并且该评估模型与常用风险评估模型的结论基本吻合,有助于LNG等化工企业双重预防机制的建设与优化。