Monte—Carlo方法在模拟物理实验中的应用

本文利用Monte-Carlo方法模拟了双缝干涉现象,由于可见几率概念的引入,使得干涉条纹非常清晰;还模拟了氧气分子的速率及高度分布情况.可用于微机辅助教学。

基于Matlab的Monte—Carlo法对钢管混凝土构件的可靠度分析

用Monte-Carlo法对圆钢管混凝土轴压短柱的可靠度进行了分析．用Matlab的数值计算功能解决了Monte-Carlo法直接抽样的困难，研究了不同荷载效应比，不同材料强度，以及含钢率变化对轴压短柱可靠度的影响，得到令人满意的结果。

大型发输电组合系统可靠性评估的Monte—Carlo法

本文提出了一种大型发输电组合系统可靠性评估的Monte-Carlo方法。它基于分散抽样技术、缺电功率分析法和最小缺电功率优化模型的结合,不仅计算比较快速,而且也有较高精度;在系统元件增加时,计算量只呈线性增长,因而特别适于大系统;对故障状态的抽样模拟,比确定性枚举更接近电力系统运行中故障发生的实际情况。而且方法很容易推广到计及元件的多状态、负荷的多水平及负荷的随机分布特性。文中给出了IEEE-RTS系统的计算结果,并与其它两种方法的结果作了比较。

SU(2)格点规范场系统非对称点阵Monte—Carlo模拟

本文在非对称点阵上模拟了 SU(2)纯规范场系统的热力学行为,并讨论了有限尺寸效应和实现连续物理极限问题。

Monte—Carlo法解尺寸链

尺寸链计算是为了确定与整机精度有关的零部件尺寸公差、形位公差之间的关系.从工程实际出发,尺寸链中各组成环的零部件尺寸一般应服从各种分布的随机变量.当出现非正态分布时,用常规统计法难于求解.本文介绍的Mote-Carlo 法是利用计算机模拟生成各种分布规律的随机数并进行合成处理的一种方法,可解决较为广泛的尺寸链计算问题.

双Monte—Carlo方法模拟计算正态分布串联系统的可靠度

电子计算机的模拟在现代科学中得到广泛的应用,特别是对一些应用性问题(无法在实际生产中实验的),离开了计算机的模拟将无法得到验证.本文就可靠性统计中正态分布串联系统的可靠度估计问题采用双 Monte—Carlo 方法进行电子计算机模拟.

数值积分的Monte—Carlo法程序

在实际中,经常会碰到这样的问题:对于给足的有限区间〔α,b〕上的连续函数f(χ)需要计算定积分∫b/af(x)dx的值。利用牛顿——莱不尼慈公式:∫b/af(x)dx=F(b)-F(a) 仅仅能解决被积函数f(x)的原函数F(x)以初等函数的形式存在且容易求出的问题。但是,在大量的实际问题中,有许多被讨论的被积函数f(x)的原函数不能用初等函数的闭合形式表示,

炉内辐射换热的Monte—Carlo方法计算

本文在在选取双重坐标系的前提下,开发了用Monte—Carlo方法计算燃烧炉内辐射换热的一种较为普遍的计算程序,作为对该程序可靠性的一个验证,我们在简单的条件下计算了一些辐射换热的直接交换面积与全交换面积,结果与解析解符合的很好。最后我们就简化条件下的扁钢锭在炉内的辐射换热问题给出了一个计算结果。

Monte Carlo方法在移动通信可靠性分析中的应用

文章主要探讨Monte Carlo方法在移动通信可靠性分析中的应用,并引入重要抽样技术对Monte Carlo方法进行优化。首先,文章介绍Monte Carlo方法的基本原理及其在移动通信可靠性分析中的应用。其次,引入重要抽样技术对该方法进行优化。最后,利用优化网络工程工具(Optimized Network Engineering Tools,OPNET)模拟平台构建相应的移动通信网络模型,并对比Monte Carlo方法和本文研究的优化方法在不同样本数量下的性能差异。结果表明,重要抽样技术的引入显著提高了Monte Carlo方法在移动通信可靠性分析中的准确性和效率,减少了方差,验证了该方法在移动通信可靠性分析中的有效性和实用性。

基于Monte-Carlo仿真的恒应力加速试验方案模拟评价

为了保证可靠性加速试验方案的正确性和可行性,提出基于仿真的模拟评价方法。以最具代表性的Weibull寿命分布产品的恒应力加速寿命试验为例,以代表试验结果准确性和稳定性的指标——中位寿命估计值渐进方差的均值和标准差作为评价指标,通过Monte-Carlo仿真模拟生成失效数据,对不同试验方案的统计精度和稳定性进行评价,为加速寿命试验优化设计的工程实现提供了思路和实例验证。

Exhaustive review of acceleration strategies for Monte Carlo simulations in photon transit

Monte Carlo simulation techniques have become the quintessence and a pivotal nexus of inquiry in the realm of simulating photon movement within biological fabrics.Through the stochastic sampling of tissue archetypes delineated by explicit optical characteristics,Monte Carlo simulations possess the theoretical capacity to render unparalleled accuracy in the depiction of exceedingly intricate phenomena.Nonetheless,the quintessential challenge associated with Monte Carlo simulation methodologies resides in their extended computational duration,which significantly impedes the refinement of their precision.Consequently,this discourse is specifically dedicated to exploring innovations in strategies and technologies aimed at expediting Monte Carlo simulations.It delves into the foundational concepts of various acceleration tactics,evaluates these strategies concerning their speed,accuracy,and practicality,and amalgamates a comprehensive overview and critique of acceleration methodologies for Monte Carlo simulations.Ultimately,the discourse envisages prospective trajectories for the employment of Monte Carlo techniques within the domain of tissue optics.

Research on a Monte Carlo global variance reduction method based on an automatic importance sampling method

Global variance reduction is a bottleneck in Monte Carlo shielding calculations.The global variance reduction problem requires that the statistical error of the entire space is uniform.This study proposed a grid-AIS method for the global variance reduction problem based on the AIS method,which was implemented in the Monte Carlo program MCShield.The proposed method was validated using the VENUS-Ⅲ international benchmark problem and a self-shielding calculation example.The results from the VENUS-Ⅲ benchmark problem showed that the grid-AIS method achieved a significant reduction in the variance of the statistical errors of the MESH grids,decreasing from 1.08×10^(-2) to 3.84×10^(-3),representing a 64.00% reduction.This demonstrates that the grid-AIS method is effective in addressing global issues.The results of the selfshielding calculation demonstrate that the grid-AIS method produced accurate computational results.Moreover,the grid-AIS method exhibited a computational efficiency approximately one order of magnitude higher than that of the AIS method and approximately two orders of magnitude higher than that of the conventional Monte Carlo method.

基于Monte Carlo的风力机叶片强度可靠性分析

随着风力机应用数量增多,以及应用规模扩大,风力机叶片可靠度的保证尤为关键。利用Monte Carlo客观分析叶片强度可靠性,为叶片安全状态长效维持提供依据,实现风力机的平稳运转。该文在介绍Monte Carlo的基础上,分析风力机类型及其叶片状态和叶片参数,并以有限元模型构建的方式分析风力机叶片载荷及强度,最后探究基于Monte Carlo的风力机叶片可靠性。

非对称循环弯曲变形再结晶组织的Monte Carlo模拟

利用Monte Carlo方法模拟了非对称循环弯曲变形工艺下的静态再结晶过程,分析了循环道次、退火温度等工艺参数对板材表面及厚度方向上组织演变和晶粒尺寸分布的影响,并基于模拟数据,建立了静态再结晶晶粒尺寸预测模型。结果表明,在450~750℃的退火温度范围内,随着循环道次增加、退火温度升高以及与板材表面距离的减小,静态再结晶晶粒尺寸显著减小。当达到7个循环道次后,板材表面的晶粒尺寸趋于稳定;而在11个循环道次后,厚度方向的晶粒尺寸均匀化,并细化为等轴晶。此外,通过将模拟结果和金相实验得到的再结晶晶粒尺寸进行对比,模型的预测结果和实验数据吻合度高,所建模型的有效性和准确性得到验证。

Machine learning-enhanced Monte Carlo and subset simulations for advanced risk assessment in transportation infrastructure

The maintenance of safety and dependability in rail and road embankments is of utmost importance in order to facilitate the smooth operation of transportation networks.This study introduces a comprehensive methodology for soil slope stability evaluation,employing Monte Carlo Simulation(MCS)and Subset Simulation(SS)with the"UPSS 3.0 Add-in"in MS-Excel.Focused on an 11.693-meter embankment with a soil slope(inclination ratio of 2H:1V),the investigation considers earthquake coefficients(kh)and pore water pressure ratios(ru)following Indian zoning requirements.The chance of slope failure showed a considerable increase as the Coefficient of Variation(COV),seismic coefficients(kh),and pore water pressure ratios(ru)experienced an escalation.The SS approach showed exceptional efficacy in calculating odds of failure that are notably low.Within computational modeling,the study optimized the worst-case scenario using ANFIS-GA,ANFIS-GWO,ANFIS-PSO,and ANFIS-BBO models.The ANFIS-PSO model exhibits exceptional accuracy(training R2=0.9011,RMSE=0.0549;testing R2=0.8968,RMSE=0.0615),emerging as the most promising.This study highlights the significance of conducting thorough risk assessments and offers practical insights into evaluating and improving the stability of soil slopes in transportation infrastructure.These findings contribute to the enhancement of safety and reliability in real-world situations.

Emergent topological ordered phase for the Ising-XY model revealed by cluster-updating Monte Carlo method

The two-component cold atom systems with anisotropic hopping amplitudes can be phenomenologically described by a two-dimensional Ising-XY coupled model with spatial anisotropy.At low temperatures,theoretical predictions[Phys.Rev.A 72053604(2005)]and[arXiv:0706.1609]indicate the existence of a topological ordered phase characterized by Ising and XY disorder but with 2XY ordering.However,due to ergodic difficulties faced by Monte Carlo methods at low temperatures,this topological phase has not been numerically explored.We propose a linear cluster updating Monte Carlo method,which flips spins without rejection in the anisotropy limit but does not change the energy.Using this scheme and conventional Monte Carlo methods,we succeed in revealing the nature of topological phases with half-vortices and domain walls.In the constructed global phase diagram,Ising and XY-type transitions are very close to each other and differ significantly from the schematic phase diagram reported earlier.We also propose and explore a wide range of quantities,including magnetism,superfluidity,specific heat,susceptibility,and even percolation susceptibility,and obtain consistent and reliable results.Furthermore,we observed first-order transitions characterized by common intersection points in magnetizations for different system sizes,as opposed to the conventional phase transition where Binder cumulants of various sizes share common intersections.The critical exponents of different types of phase transitions are reasonably fitted.The results are useful to help cold atom experiments explore the half-vortex topological phase.

Chord length sampling correction analysis for dispersion fuel in Monte Carlo simulation

Dispersion fuels,knowned for their excellent safety performance,are widely used in advanced reactors,such as hightemperature gas-cooled reactors.Compared with deterministic methods,the Monte Carlo method has more advantages in the geometric modeling of stochastic media.The explicit modeling method has high computational accuracy and high computational cost.The chord length sampling(CLS)method can improve computational efficiency by sampling the chord length during neutron transport using the matrix chord length?s probability density function.This study shows that the excluded-volume effect in realistic stochastic media can introduce certain deviations into the CLS.A chord length correction approach is proposed to obtain the chord length correction factor by developing the Particle code based on equivalent transmission probability.Through numerical analysis against reference solutions from explicit modeling in the RMC code,it was demonstrated that CLS with the proposed correction method provides good accuracy for addressing the excludedvolume effect in realistic infinite stochastic media.

Monte Carlo method for evaluation of surface emission rate measurement uncertainty

The aim of this study is to evaluate the uncertainty of 2πα and 2πβ surface emission rates using the windowless multiwire proportional counter method.This study used the Monte Carlo method (MCM) to validate the conventional Guide to the Expression of Uncertainty in Measurement (GUM) method.A dead time measurement model for the two-source method was established based on the characteristics of a single-channel measurement system,and the voltage threshold correction factor measurement function was indirectly obtained by fitting the threshold correction curve.The uncertainty in the surface emission rate was calculated using the GUM method and the law of propagation of uncertainty.The MCM provided clear definitions for each input quantity and its uncertainty distribution,and the simulation training was realized with a complete and complex mathematical model.The results of the surface emission rate uncertainty evaluation for four radioactive plane sources using both methods showed the uncertainty’s consistency E_(n)<0.070 for the comparison of each source,and the uncertainty results of the GUM were all lower than those of the MCM.However,the MCM has a more objective evaluation process and can serve as a validation tool for GUM results.

Health risk assessment of trace metal(loid)s in agricultural soils based on Monte Carlo simulation coupled with positive matrix factorization model in Chongqing, southwest China

This study aimed to investigate the pollution characteristics, source apportionment, and health risks associated with trace metal(loid)s(TMs) in the major agricultural producing areas in Chongqing, China. We analyzed the source apportionment and assessed the health risk of TMs in agricultural soils by using positive matrix factorization(PMF) model and health risk assessment(HRA) model based on Monte Carlo simulation. Meanwhile, we combined PMF and HRA models to explore the health risks of TMs in agricultural soils by different pollution sources to determine the priority control factors. Results showed that the average contents of cadmium(Cd), arsenic (As), lead(Pb), chromium(Cr), copper(Cu), nickel(Ni), and zinc(Zn) in the soil were found to be 0.26, 5.93, 27.14, 61.32, 23.81, 32.45, and 78.65 mg/kg, respectively. Spatial analysis and source apportionment analysis revealed that urban and industrial sources, agricultural sources, and natural sources accounted for 33.0%, 27.7%, and 39.3% of TM accumulation in the soil, respectively. In the HRA model based on Monte Carlo simulation, noncarcinogenic risks were deemed negligible(hazard index <1), the carcinogenic risks were at acceptable level(10^(-6)<total carcinogenic risk ≤ 10^(-4)), with higher risks observed for children compared to adults. The relationship between TMs, their sources, and health risks indicated that urban and industrial sources were primarily associated with As, contributing to 75.1% of carcinogenic risks and 55.7% of non-carcinogenic risks, making them the primary control factors. Meanwhile, agricultural sources were primarily linked to Cd and Pb, contributing to 13.1% of carcinogenic risks and 21.8% of non-carcinogenic risks, designating them as secondary control factors.

Optimization of the Use of Spherical Targets for Point Cloud Registration Using Monte Carlo Simulation

Registrations based on the manual placement of spherical targets are still being employed by many professionals in the industry.However,the placement of those targets usually relies solely on personal experience without scientific evidence supported by numerical analysis.This paper presents a comprehensive investigation,based on Monte Carlo simulation,into determining the optimal number and positions for efficient target placement in typical scenes consisting of a pair of facades.It demonstrates new check-up statistical rules and geometrical constraints that can effectively extract and analyze massive simulations of unregistered point clouds and their corresponding registrations.More than 6×10^(7) sets of the registrations were simulated,whereas more than IOO registrations with real data were used to verify the results of simulation.The results indicated that using five spherical targets is the best choice for the registration of a large typical registration site consisting of two vertical facades and a ground,when there is only a box set of spherical targets available.As a result,the users can avoid placing extra targets to achieve insignificant improvements in registration accuracy.The results also suggest that the higher registration accuracy can be obtained when the ratio between the facade-to-target distance and target-to-scanner distance is approximately 3:2.Therefore,the targets should be placed closer to the scanner rather than in the middle between the facades and the scanner,contradicting to the traditional thought. Besides,the results reveal that the accuracy can be increased by setting the largest projected triangular area of the targets to be large.