Quantitative analysis of the morphing wing mechanism of raptors:Morphing kinematics of Falco peregrinus wing

Raptors are getting more attention from researchers because of their excellent flight abilities.And the excellent wing morphing ability is critical for raptors to achieve high maneuvering flight,which can be a good bionic inspiration for unmanned aerial vehicles(UAV)design.However,morphing wing motions of Falco peregrinus with multi postures cannot be consulted since such a motion database was nonexistent.This study aimed to provide data reference for future research in wing morphing kinetics.We used the computed tomography(CT)approach to obtain nine critical postures of the Falco peregrinus wing skeleton,followed with motion analysis of each joint and bone.Based on the obtained motion database,a six-bar kinematic model was proposed to regenerate wing motions with a high fidelity.

Hierarchical Honeycomb-Structured Electret/Triboelectric Nanogenerator for Biomechanical and Morphing Wing Energy Harvesting

Flexible,compact,lightweight and sustainable power sources are indispensable for modern wearable and personal electronics and small-unmanned aerial vehicles(UAVs).Hierarchical honeycomb has the unique merits of compact mesostructures,excellent energy absorption properties and considerable weight to strength ratios.Herein,a honeycomb-inspired triboelectric nanogenerator(h-TENG)is proposed for biomechanical and UAV morphing wing energy harvesting based on contact triboelectrification wavy surface of cellular honeycomb structure.The wavy surface comprises a multilayered thin film structure(combining polyethylene terephthalate,silver nanowires and fluorinated ethylene propylene)fabricated through high-temperature thermoplastic molding and wafer-level bonding process.With superior synchronization of large amounts of energy generation units with honeycomb cells,the manufactured h-TENG prototype produces the maximum instantaneous open-circuit voltage,short-circuit current and output power of 1207 V,68.5μA and 12.4 mW,respectively,corresponding to a remarkable peak power density of 0.275 mW cm^(−3)(or 2.48 mW g^(−1))under hand pressing excitations.Attributed to the excellent elastic property of self-rebounding honeycomb structure,the flexible and transparent h-TENG can be easily pressed,bent and integrated into shoes for real-time insole plantar pressure mapping.The lightweight and compact h-TENG is further installed into a morphing wing of small UAVs for efficiently converting the flapping energy of ailerons into electricity for the first time.This research demonstrates this new conceptualizing single h-TENG device’s versatility and viability for broad-range real-world application scenarios.

Tensile Deformation Properties of Corrugated Style Fiber Reinforced Composite Skin for a Morphing Wing

A type of skin structure which is made by a Circular Arc Corrugated Style Fiber Reinforced Composite （CACSFRC） is proposed to meet the requirements of the large and continuous deformation and high load capacity of a morphing wing skin. A mechanical model is developed to predict the tensile deformation properties and equiva- lent elastic modulus of the composite skin. Corrugated and plane skin samples are manufactured and tested. The theoretical analysis and tension tests show that CCSFRC skin has markedly much more tensile deforming capability than plane skin in the range of elasticity. The quantity of tensile deformation is in direct proportion to the number of ripples, and in inverse proportion to the cubic of ratio thickness, while the equivalent elastic modulus is in direct proportion to the cubic of ratio thickness approximately. Experiments prove that the predicted theoretical models are reliable and effective.

Modeling and Experiment of a Morphing Wing Integrated with a Trailing Edge Control Actuation System

Morphing wing has attracted many research attention and effort in aircraft technology development because of its advantage in lift to draft ratio and flight performance.Morphing wing technology combines the lift and control surfaces into a seamless wing and integrates the primary structure together with the internal control system.It makes use of the wing aeroelastic deformation induced by the control surface to gain direct force control through desirable redistribution of aerodynamic forces.However some unknown mechanical parameters of the control system and complexity of the integrated structure become a main challenge for dynamic modeling of morphing wing.To solve the problem,a method of test data based modal sensitivity analysis is presented to improve the morphing wing FE model by evaluating the unknown parameters and identifying the modeling boundary conditions.An innovative seamless morphing wing with the structure integrated with a flexible trailing edge control system is presented for the investigation.An experimental model of actuation system driven by a servo motor for the morphing wing is designed and established.By performing a vibration test and the proposed modal sensitivity analysis,the unknown torsional stiffness of the servo motor and the boundary condition of the actuation mechanism model is identified and evaluated.Comparing with the test data,the average error of the first four modal frequency of the improved FE model is reduced significantly to less than 4%.To further investigate the morphing wing modeling,a wing box and then a whole morphing wing model including the skin and integrated with the trailing edge actuation system are established and tested.By using the proposed method,the FE model is improved by relaxing the constraint between the skin and actuation mechanism.The results show that the average error of the first three modal frequency of the improved FE model is reduced to less than 6%.The research results demonstrate that the presented seamless morphing wing integrated with a flexible trailing edge control surface can improve aerodynamic characteristics.By using the test data based modal sensitivity analysis method,the unknown parameter and boundary condition of the actuation model can be determined to improve the FE model.The problem in dynamic modeling of high accuracy for a morphing wing can be solved in an effective manner.

Constrained cooperative control design for distributed morphing wing systems

An efficient design method is proposed for the cooperative control problem of morphing wing systems with distributed structures and bounded control inputs. The multi-agent model of the distributed morphing wing system is established. The cooperative controllers with saturation constraints are presented. By introducing the concepts in consensus algorithms, the cooperative information links in the controllers are described by graphs, and the corresponding Laplacian matrix is defined. The design conditions of the cooperative controllers are proposed, in the form of linear matrix inequalities. For the case of undirected information links, the controller design conditions are simplified as algebraic inequalities, which highly reduce the computation cost. The designed controllers are implemented on a distributed morphing wing platform, and experiments are carried out. Simulation and experiment results show that the controllers can make all the actuating units in the morphing wing system cooperatively achieve the desired positions, which demonstrates the effectiveness of the proposed theory.

Trajectory Optimization Design for Morphing Wing Missile

This paper presents a new particle swarm optimization( PSO) algorithm to optimize the trajectory of morphing-wing missile so as to achieve the enlargement of the maximum range. Equations of motion for the twodimensional dynamics are derived by treating the missile as an ideal controllable mass point. An investigation of aerodynamic characteristics of morphing-wing missile with varying geometries is performed. After deducing the optimizing trajectory model for maximizing range,a type of discrete method is put forward for taking optimization control problem into nonlinear dynamic programming problem. The optimal trajectory is solved by using PSO algorithm and penalty function method. The simulation results suggest that morphing-wing missile has the larger range than the fixed-shape missile when launched at supersonic speed,while morphing-wing missile has no obvious range increment than the fixed-shape missile at subsonic speed.

Piezoelectric energy harvesting from morphing wing motions for micro air vehicles

Wing flapping and morphing can be very beneficial to managing the weight of micro air vehicles through coupling the aerodynamic forces with stability and control. In this letter, harvesting energy from the wing morphing is studied to power cameras, sensors, or communication devices of micro air vehicles and to aid in the management of their power. The aerodynamic loads on flapping wings are simulated using a three-dimensional unsteady vortex lattice method. Active wing shape morphing is considered to enhance the performance of the flapping motion. A gradient-based optimization algorithm is used to pinpoint the optimal kinematics maximizing the propellent efficiency. To benefit from the wing deformation, we place piezoelectric layers near the wing roots. Gauss law is used to estimate the electrical harvested power. We demonstrate that enough power can be generated to operate a camera. Numerical analysis shows the feasibility of exploiting wing morphing to harvest energy and improving the design and performance of micro air vehicles.

Gust response of an elasto-flexible morphing wing using fluid–structure interaction simulations

Small and micro unmanned aircraft are the focus of scientific interest due to their wide range of applications.They often operate in a highly unstable flight environment where the application of new morphing wing technologies offers the opportunity to improve flight characteristics.The investigated concept comprises port and starboard adjustable wings,and an adaptive elastoflexible membrane serves as the lifting surface.The focus is on the benefits of the deforming membrane during the impact of a one-minus-cosine type gust.At a low Reynolds number of Re=264000,the morphing wing model is investigated numerically by unsteady fluid-structure interaction simulations.First,the numerical results are validated by experimental data from force and moment,flow field,and deformation measurements.Second,with the rigid wing as the baseline,the flexible case is investigated,focusing on the advantages of the elastic membrane.For all configurations studied,the maximum amplitude of the lift coefficient under gust load shows good agreement between the experimental and numerical results.During the decay of the gust,they differ more the higher the aspect ratio of the wing.When considering the flow field,the main differences are due to the separation behavior on the upper side of the wing.The flow reattaches earlier in the experiments than in the simulations,which explains the higher lift values observed in the former.Only at one intermediate configuration does the lift amplitude of the rigid configuration exceeds that of the flexible by about 12%,with the elastic membrane resulting in a smaller and more uniform peak load,which is also evident in the wing loading and hence in the root bending moment.

A Distributed Coordinated Control Scheme for Morphing Wings with Sampled Communication

To investigate the control of morphing wings by means of interacting effectors,this article proposes a distributed coordinated control scheme with sampled communication on the basis of a simple morphing wing model,established with arrayed agents. The control scheme can change the shape of airfoil into an expected one and keep it smooth during morphing. As the interconnection of communication network and the agents would make the behavior of the morphing wing system complicated,a diagrammatic stability analysis method is put forward to ensure the system stability. Two simulations are carried out on the morphing wing system by using MATLAB. The results stand witness to the feasibility of the distributed coordinated control scheme and the effectiveness of the diagrammatic stability analysis method.

Integrated optimization design of smart morphing wing for accurate shape control

Smart morphing wing, which is equipped with smart materials and able to change structural geometry adaptively, can further improve aerodynamic efficiency of aircraft. This paper presents a new integrated layout and topology optimization design for morphing wing driven by shape memory alloys(SMAs). By simultaneously optimizing the layout of smart actuators and topology of wing substrate, the ultimately determined configuration can achieve smooth, continuous and accurate geometric shape changes. In addition, aerodynamic analysis is carried out to compare smart morphing wing with traditional hinged airfoil. Finally, the optimized smart wing structure is constructed and tested to demonstrate and verify the morphing functionality. Application setbacks are also pointed out for further investigation.

Optimization and design of an aircraft's morphing wing-tip demonstrator for drag reduction at low speeds, Part II- Experimental validation using Infra-Red transition measurement from Wind Tunnel tests

In the present paper, an ‘in-house＇ genetic algorithm was numerically and experimentally validated. The genetic algorithm was applied to an optimization problem for improving the aerodynamic performances of an aircraft wing tip through upper surface morphing. The optimization was performed for 16 flight cases expressed in terms of various combinations of speeds, angles of attack and aileron deflections. The displacements resulted from the optimization were used during the wind tunnel tests of the wing tip demonstrator for the actuators control to change the upper surface shape of the wing. The results of the optimization of the flow behavior for the airfoil morphing upper-surface problem were validated with wind tunnel experimental transition results obtained with infra-red Thermography on the wing-tip demonstrator. The validation proved that the 2D numerical optimization using the ‘in-house＇ genetic algorithm was an appropriate tool in improving various aspects of a wing＇s aerodynamic performances.

Optimization and design of an aircraft's morphing wing-tip demonstrator for drag reduction at low speed, Part Ⅰ–Aerodynamic optimization using genetic, bee colony and gradient descent algorithms

In this paper, an ‘in-house＇ genetic algorithm is described and applied to an optimization problem for improving the aerodynamic performances of an aircraft wing tip through upper surface morphing. The algorithm＇s performances were studied from the convergence point of view, in accordance with design conditions. The algorithm was compared to two other optimization methods,namely the artificial bee colony and a gradient method, for two optimization objectives, and the results of the optimizations with each of the three methods were plotted on response surfaces obtained with the Monte Carlo method, to show that they were situated in the global optimum region. The optimization results for 16 wind tunnel test cases and 2 objective functions were presented. The 16 cases used for the optimizations were included in the experimental test plan for the morphing wing-tip demonstrator, and the results obtained using the displacements given by the optimizations were evaluated.

Morphing wing flaps for large civil aircraft:Evolution of a smart technology across the Clean Sky program

Abstract Morphing wing structures are widely considered among the most promising technologies for the improvement of aerodynamic performances in large civil aircraft.The controlled adaptation of the wing shape to external operative conditions naturally enables the maximization of aircraft aerodynamic efficiency,with positive fallouts on the amount of fuel burned and pollutant emissions.The benefits brought by morphing wings at aircraft level are accompanied by the criticalities of the enabling technologies,mainly involving weight penalties,overconsumption of electrical power,and safety issues.The attempt to solve such criticalities passes through the development of novel design approaches,ensuring the consolidation of reliable structural solutions that are adequately mature for certification and in-flight operations.In this work,the development phases of a multimodal camber morphing wing flap,tailored for large civil aircraft applications,are outlined with specific reference to the activities addressed by the author in the framework of the Clean Sky program.The flap is morphed according to target shapes depending on aircraft flight conditions and defined to enhance high-lift performances during takeoff and landing,as well as wing aerodynamic efficiency during cruise.An innovative system based on finger-like robotic ribs driven by electromechanical actuators is proposed as morphing-enabling technology;the maturation process of the device is then traced from the proof of concept to the consolidation of a true-scale demonstrator for pre-flight ground validation tests.A step-by-step approach involving the design and testing of intermediate demonstrators is then carried out to show the compliance of the adaptive system with industrial standards and safety requirements.The technical issues encountered during the development of each intermediate demonstrator are critically analyzed,and justifications are provided for all the adopted engineering solutions.Finally,the layout of the true-scale demonstrator is presented,with emphasis on the architectural strengths,enabling the forthcoming validation in real operative conditions.

Proportional fuzzy feed-forward architecture control validation by wind tunnel tests of a morphing wing

In aircraft wing design,engineers aim to provide the best possible aerodynamic performance under cruise flight conditions in terms of lift-to-drag ratio.Conventional control surfaces such as flaps,ailerons,variable wing sweep and spoilers are used to trim the aircraft for other flight conditions.The appearance of the morphing wing concept launched a new challenge in the area of overall wing and aircraft performance improvement during different flight segments by locally altering the flow over the aircraft＇s wings.This paper describes the development and application of a control system for an actuation mechanism integrated in a new morphing wing structure.The controlled actuation system includes four similar miniature electromechanical actuators disposed in two parallel actuation lines.The experimental model of the morphing wing is based on a full-scale portion of an aircraft wing,which is equipped with an aileron.The upper surface of the wing is a flexible one,being closed to the wing tip;the flexible skin is made of light composite materials.The four actuators are controlled in unison to change the flexible upper surface to improve the flow quality on the upper surface by delaying or advancing the transition point from laminar to turbulent regime.The actuators transform the torque into vertical forces.Their bases are fixed on the wing ribs and their top link arms are attached to supporting plates fixed onto the flexible skin with screws.The actuators push or pull the flexible skin using the necessary torque until the desired vertical displacement of each actuator is achieved.The four vertical displacements of the actuators,correlated with the new shape of the wing,are provided by a database obtained through a preliminary aerodynamic optimization for specific flight conditions.The control system is designed to control the positions of the actuators in real time in order to obtain and to maintain the desired shape of the wing for a specified flight condition.The feasibility and effectiveness of the developed control system by use of a proportional fuzzy feed-forward methodology are demonstrated experimentally through bench and wind tunnel tests of the morphing wing model.

Design and experiment of concentrated flexibility-based variable camber morphing wing

The morphing wing has a significant positive effect on the aerodynamic performance of the aircraft.This paper describes a leading-edge of variable camber wing with concentrated flexibility based on the geared five-bar mechanism.The driving points of morphing skin formed by the glass fibre composite sheet were optimized to make the skin deformation smooth.A geared fivebar kinematic mechanism rigidly connected to the skin was proposed to drive the leading-edge deformation.Besides,a new kind of concentrated flexure hinge was designed using the pseudorigid-body method and applied to the joint between the rigid mechanism and the skin.Finally,the leading-edge prototypes with traditional hinges and flexure hinges were produced,respectively.The feasibility of the concentrated flexibility leading-edge was verified through the comparative experiments of ground deformation.Simultaneously,aerodynamic analysis was carried out to compare the concentrated flexure leading-edge wing with the original airfoil.

Aerodynamic characteristics of morphing wing withflexible leading-edge

The morphing wing can improve the flight performance during different phases.However,research has been subject to limitations in aerodynamic characteristics of the morphing wing with a flexible leading-edge.The computational fluid dynamic method and dynamic mesh were used to simulate the continuous morphing of the flexible leading-edge.After comparing the steady aerodynamic characteristics of morphing and conventional wings,this study examined the unsteady aerodynamic characteristics of morphing wings with upward and downward deflections of the leading-edge at different frequencies.The numerical results show that for the steady aerodynamic,the leading-edge deflection mainly affects the stall characteristic.The downward deflection of the leading-edge increases the stall angle of attack and nose-down pitching moment.The results are opposite for the upward deflection.For the unsteady aerodynamic,at a small angle of attack,the transient lift coefficient of the upward deflection,growing with the increase of deflection frequency,is larger than that of the static case.The transient lift coefficient of the downward deflection,decreasing with the increase of deflection frequency,is smaller than that of the static case.However,at a large angle of attack,an opposite effect of deflection frequency on the transient lift coefficient was demonstrated.The transient lift coefficient is larger than that of the static case when the leading edge is in the nose-up stage,and lower than that of the static one in the nose-down stage.

Design and experimental testing of a control system for a morphing wing model actuated with miniature BLDC motors

The paper deals with the design and experimental validation of the actuation mechanism control system for a morphing wing model.The experimental morphable wing model manufactured in this project is a full-size scale wing tip for a real aircraft equipped with an aileron.The morphing actuation of the model is based on a mechanism with four similar in house designed and manufactured actuators,positioned inside the wing on two parallel lines.Each of the four actuators used a BrushLess Direct Current(BLDC)electric motor integrated with a mechanical part performing the conversion of the angular displacements into linear displacements.The following have been chosen as successive steps in the design of the actuator control system:(A)Mathematical and software modelling of the actuator;(B)Design of the control system architecture and tuning using Internal Model Control(IMC)methodology;(C)Numerical simulation of the controlled actuator and its testing on bench and wind tunnel.The morphing wing experimental model is tested both at the laboratory level,with no airflow,to evaluate the components integration and the whole system functioning,but also in the wind tunnel,in the presence of airflow,to evaluate its behavior and the aerodynamic gain.

Role of wing morphing in thrust generation

In this paper, we investigate the role of morphing on flight dynamics of two birds by simulating the flow over rigid and morphing wings that have the characteristics of two different birds, namely the Giant Petrel and Dove Prion. The simulation of a flapping rigid wing shows that the root of the wing should be placed at a specific angle of attack in order to generate enough lift to balance the weight of the bird. However, in this case the generated thrust is either very small, or even negative, depending on the wing shape. Further, results show that morphing of the wing enables a significant increase in the thrust and propulsive efficiency. This indicates that the birds actually utilize some sort of active wing twisting and bending to produce enough thrust. This study should facilitate better guidance for the design of flapping air vehicles.

Effects of dynamical spanwise retraction and stretch on flapping-wing forward flights

Birds and bats retract and stretch their wings dynamically during each flap in level flights, implying intriguing mechanisms for the aerodynamic performance improvement of flapping wings. A numerical investigation into the aerodynamic effects of such bio-inspired concept in forward flights has been performed based on a three-dimensional wing in plunging motion and a twosection wing in flapping motion. The currently considered Reynolds number and Strouhal number are Re=1.5×10^(5) and St=0.3, respectively. During the research, the mean angle of attack is varied in relatively wide ranges to achieve lift-thrust interconversion for the wings. The conclusive results show that dynamical spanwise retraction and stretch has induced three absolutely desirable scenarios for the oscillating wings in forward flights, namely producing more lift and consuming less power for a given thrust generation, producing more thrust and consuming less power for a given lift generation, and producing more lift and more thrust while consuming less power. Furthermore,the morphing wings have alleviated periodical aerodynamic load fluctuations compared with the non-morphing baseline. The mechanism of the aerodynamic effects of the bionic morphing mode is analyzed with the aid of field visualization. The current article is the first to reveal the absolute advantages of the bionic spanwise morphing. Hopefully, it may help comprehend the behaviors of natural fliers and provide inspirations for performance enhancement of micro artificial flappingwing vehicles.

Fluid-structure interaction simulation for multi-body flexible morphing structures

The multi-body flexible morphing airfoil can improve the aerodynamic characteristics based on different flight missions continuously.Recently researches have focused on the unsteady aerodynamic characteristics of flexible wings under passive actuation.However,the unsteady aerodynamic characteristics with the fluid-structure interaction effects in the multi-body active actuation process of morphing airfoil deserve further investigation.In this paper,a fluid-structure coupled simulation method for multi-body flexible morphing airfoil with active actuation subsystem was investigated,and the aerodynamic characteristics during deformation were compared with different skin flexibility,flow field environment,actuation mode and actuation time.The numerical results show that for the steady aerodynamic,the skin flexibility can improve the stability efficiency.In the unsteady process,the change trend of the transient lift coefficient and pitching moment are consistent with those of the active drive characteristics,while the instantaneous lift-drag ratio coefficient is greatly affected by the driving mode and can be improved by increasing the driving duration.