Efficiency of the motion amplification device with viscous dampers and its application in high-rise buildings

After nearly a decade of application and investigation, a motion amplification device with viscous dampers for energy dissipation has been recognized as an effective solution to mitigate wind or seismic excitation, especially for stiff structural systems. As a result of compensation of amplified motion, it has been proved that the efficiency of viscous damper largely depends on the motion amplification device configuration, particularly for device stiflhess. In this paper, a ＂scissor-jack＂ type of motion amplification device, called a ＂toggle brace damper＂ system, is studied. It is demonstrated that the efficiency of such a device reflected by its amplification factor is not merely a function of its geometric configuration, but is highly dependent on the support elements＇ stiffness as well, similar to the mechanism of a leverage arm. Accordingly, a mathematical model in terms of complex modulus of the viscous damper with consideration of the support brace＇s stiffness is established. The results indicate that the efficiency of the motion amplification device with viscous dampers significantly depends on the stiffness of the support elements. Other parameters, such as toggle brace configuration and damping values of the viscous damper, are studied and compared. As an application example, numerical analyses are conducted to study the dynamic performance of a 39-story office tower installed with toggle brace dampers constructed on soft soil in a reclaimed area, under a combined effect of the vortex shedding of an adjacent existing 52-story building and earthquakes. The results show that viscous dampers with a motion amplification system using a properly designed toggle brace device proved to be an effective solution to alleviate the external excitations.

A note on near-field site amplification effects of ground motion from a radially inhomogeneous valley

To improve the understanding of the near-field soil and topographic amplification effects, an analytical solution by the authors for the scattering of plane SH waves by a radially inhomogeneous semi-cylindrical valley is extended to the case of a line source of cylindrical SH waves. Upon confirmation of its accuracy with past exact solutions for a homogeneous and an inhomogeneous semi-cylindrical valley under far-field plane SH waves, the extended solution is used to calculate the ground motion amplification factors for both the homogeneous and inhomogeneous valleys subjected to near-field waves. A comprehensive parametric study is conducted with respect to the location of the wave source, the dimensionless frequency of the incident waves, and the inhomogeneity degree of the covering soil layer. It is found that more amplifications and reductions of ground motions will occur within a certain range in and around the valley as the sources are located further. Consistent with the far-field case, it is confirmed that an increase of the degree of inhomogeneity of the covering soil layer generally amplifies the ground motions significantly.

Site correction of ground motion in Fujian area

On the basis of the interpretation of the highresolution satellite remote sensing images, in combination with the data of engineering geological exploration and shear-wave velocity testing, the site category-zoning map of FJ area with the scale of 1：200,000 is generated according to the site classification standard of ＂Code for Seismic design of Buildings＂ of China （GB50011 2010）. By the method of Probabilistic Seismic Hazard Analysis, we obtain bedrock seismic ground motion parameters of five recurrent periods （50, 200, 500, 1000, and 2500 a） of FJ area. By using the 617 typical soil layer structures of the site classifications in FJ area, we build seismic response models of soil layers and make seismic response analysis, then obtain the statistic sample space of site amplification factors, which possess reasonable distribution and sufficient data. Considering the distribution characteristics of The Quaternary Strata in FJ area, according to the statistic zoning （mountains and coastal areas respectively） and site classifications as well as the level of bedrock importing ground motion, the site magnification-factors of ground motion in FJ area are obtained by classification statistics.

Ambient noise as the new source for urban engineering seismology and earthquake engineering: a case study from Beijing metropolitan area

In highly populated urban centers, traditional seismic survey sources can no longer be properly applied due to restrictions in modern civilian life styles. The ambient vibration noise, including both microseisms and microtremor, though are generally weak but available anywhere and anytime, can be an ideal supplementary source for conducting seismic surveys for engineering seismology and earthquake engineering. This is funda- mentally supported by advanced digital signal processing techniques for effectively extracting the useful information out from the noise. Thus, it can be essentially regarded as a passive seismic method. In this paper we first make a brief survey of the ambient vibration noise, followed by a quick summary of digital signal processing for passive seismic surveys. Then the applications of ambient noise in engi- neering seismology and earthquake engineering for urban settings are illustrated with examples from Beijing metro- politan area. For engineering seismology the example is the assessment of site effect in a large area via microtremor observations. For earthquake engineering the example is for structural characterization of a typical reinforced con- crete high-rise building using background vibration noise.By showing these examples we argue that the ambient noise can be treated as a new source that is economical, practical, and particularly valuable to engineering seis- mology and earthquake engineering projects for seismic hazard mitigation in urban areas.