Reliable Braided Multipath Routing with Network Coding for Underwater Sensor Networks

Owing to the long propagation delay and high error rate of acoustic channels, it is very challenging to provide reliable data transfer for underwater sensor networks. Moreover, network coding is proved to be an effective coding technique for throughput and robustness of networks. In this paper, we propose a Reliable Braided Multipath Routing with Network Coding for underwater sensor networks （RBMR-NC）. Disjoint multi-path algorithm is used to build independent actual paths, as called main paths. Some braided paths on each main path are built according to the braided multi-path algorithm, which are called logic paths. When a data packet is transmitted by these nodes, the nodes can employ network coding to encode packets coming from the same group in order to further reduce relativity among these packets, and enhance the probability of successful decoding at the sink node. Braided multi-path can make the main paths to be multiplexed to reduce the probability of long paths. This paper mainly employs successful delivery rate to evaluate RBMR-NC model with theoretical analysis and simulation methods. The results indicate that the proposed RBMR-NC protocol is valuable to enhance network reliability and to reduce system redundancy.

Dynamic cluster member selection method for multi-target tracking in wireless sensor network

Multi-target tracking(MTT) is a research hotspot of wireless sensor networks at present.A self-organized dynamic cluster task allocation scheme is used to implement collaborative task allocation for MTT in WSN and a special cluster member(CM) node selection method is put forward in the scheme.An energy efficiency model was proposed under consideration of both energy consumption and remaining energy balance in the network.A tracking accuracy model based on area-sum principle was also presented through analyzing the localization accuracy of triangulation.Then,the two models mentioned above were combined to establish dynamic cluster member selection model for MTT where a comprehensive performance index function was designed to guide the CM node selection.This selection was fulfilled using genetic algorithm.Simulation results show that this method keeps both energy efficiency and tracking quality in optimal state,and also indicate the validity of genetic algorithm in implementing CM node selection.

MRBCH: A Multi-Path Routing Protocol Based on Credible Cluster Heads for Wireless Sensor Networks

Wireless sensor networks are widely used for its flexibility, but they also suffer from problems like limited capacity, large node number and vulnerability to security threats. In this paper, we propose a multi-path routing protocol based on the credible cluster heads. The protocol chooses nodes with more energy remained as cluster heads at the cluster head choosing phase, and then authenticates them by the neighbor cluster heads. Using trust mechanisms it creates the credit value, and based on the credit value the multi-path cluster head routing can finally be found. The credit value is created and exchanged among the cluster heads only. Theoretical analysis combined with simulation results demonstrate that this protocol can save the resource, prolong the lifetime, and ensure the security and performance of the network.

Multi-Gradient Routing Protocol for Wireless Sensor Networks

Sensor networks tend to support different traffic patterns since more and more emerging applications have diverse needs. We present MGRP, a Multi-Gradient Routing Protocol for wireless sensor networks, which is fully distributed and efficiently supports endto-end, one-to-many and many-to-one traffic patterns by effectively construct and maintain a gradient vector for each node. We further combine neighbor link estimation with routing information to reduce packet exchange on network dynamics and node failures. We have implemented MGRP on Tiny OS and evaluated its performance on real-world testbeds. The result shows MGRP achieves lower end-to-end packet delay in different traffic patterns compared to the state of the art routing protocols while still remains high packet delivery ratio.

Multi-objective optimization sensor node scheduling for target tracking in wireless sensor network

Target tracking in wireless sensor network usually schedules a subset of sensor nodes to constitute a tasking cluster to collaboratively track a target.For the goals of saving energy consumption,prolonging network lifetime and improving tracking accuracy,sensor node scheduling for target tracking is indeed a multi-objective optimization problem.In this paper,a multi-objective optimization sensor node scheduling algorithm is proposed.It employs the unscented Kalman filtering algorithm for target state estimation and establishes tracking accuracy index,predicts the energy consumption of candidate sensor nodes,analyzes the relationship between network lifetime and remaining energy balance so as to construct energy efficiency index.Simulation results show that,compared with the existing sensor node scheduling,our proposed algorithm can achieve superior tracking accuracy and energy efficiency.

Multihop Deterministic Energy Efficient Routing Protocol for Wireless Sensor Networks MDR

The inception of Wireless Sensor Networks (WSN) has brought convenience into many lives with uninterrupted wireless network. The nodes that transmit data consist of heterogeneous and battery equipped sensor nodes (SNs) that are deployed randomly for network surveillance. To manage the random deployment of nodes, clustering algorithms are used with efficient routing protocols. This results in aggregation and dropping of redundant data packets that enables flawless data transmission from cluster nodes to Base Station (BS) via Cluster Heads (CHs). In this paper, a dynamic and multi-hop clustering and routing protocol for thorough behavior analysis is proposed, taking distance and energy into consideration. This forms a smooth routing path from the cluster nodes, CHs, Sub-CHs to the BS. On comparing proposed process with the existing system, experimental analysis shows a significant enhancement in the performance of network lifetime, with improved data aggregation, throughput, as the protocol showing deterministic behavior while traversing the network for data transmission, we name this protocol as Multi-hop Deterministic energy efficient Routing protocol (MDR).

Research on Intrusion Detection Algorithm Based on Multi-Class SVM in Wireless Sensor Networks

A multi-class method is proposed based on Error Correcting Output Codes algorithm in order to get better performance of attack recognition in Wireless Sensor Networks. Aiming to enhance the accuracy of attack detection, the multi-class method is constructed with Hadamard matrix and two-class Support Vector Machines. In order to minimize the complexity of the algorithm, sparse coding method is applied in this paper. The comprehensive experimental results show that this modified multi-class method has better attack detection rate compared with other three coding algorithms, and its time efficiency is higher than Hadamard coding algorithm.

A Multi-Hop Dynamic Path-Selection (MHDP) Algorithm for the Augmented Lifetime of Wireless Sensor Networks

In Wireless Sensor Networks (WSN), the lifetime of sensors is the crucial issue. Numerous schemes are proposed to augment the life time of sensors based on the wide range of parameters. In majority of the cases, the center of attraction will be the nodes’ lifetime enhancement and routing. In the scenario of cluster based WSN, multi-hop mode of communication reduces the communication cast by increasing average delay and also increases the routing overhead. In this proposed scheme, two ideas are introduced to overcome the delay and routing overhead. To achieve the higher degree in the lifetime of the nodes, the residual energy (remaining energy) of the nodes for multi-hop node choice is taken into consideration first. Then the modification in the routing protocol is evolved (Multi-Hop Dynamic Path-Selection Algorithm—MHDP). A dynamic path updating is initiated in frequent interval based on nodes residual energy to avoid the data loss due to path extrication and also to avoid the early dying of nodes due to elevation of data forwarding. The proposed method improves network’s lifetime significantly. The diminution in the average delay and increment in the lifetime of network are also accomplished. The MHDP offers 50% delay lesser than clustering. The average residual energy is 20% higher than clustering and 10% higher than multi-hop clustering. The proposed method improves network lifetime by 40% than clustering and 30% than multi-hop clustering which is considerably much better than the preceding methods.

Target Tracking with QoS Support in Large Wireless Sensor Networks

Quality of Service (QoS) is important in the application of target tracking in wireless sensor networks (WSNs). When a target appears, it will trigger an event from one or more sensors. A target can only be accurately detected if a certain number of event packets are received by the sink in a predetermined detection time interval. In this paper, we propose a buffer management scheme based on event ordering to achieve QoS. We also propose a directional QoS-aware routing protocol (DQRP) for the dissemination of the event ordering list. After the dissemination, a priority queue buffer management scheme is used to ensure QoS. Our buffer management scheme works in conjunction with DQRP to ensure accurate as well as energy-efficient target detection in the presence of multiple targets. The novelty of our network architecture is that a distributed admission control scheme is implemented on each node based on a geographic routing algorithm. In our scenario, a target can only be accurately detected if a certain number of event packets are received by the sink in a predetermined detection time interval. Our main performance metric is the number of targets/events being detected. Our protocol maximizes the number of targets being detected.

Weak node protection to maximize the lifetime of wirelesssensor networks

Wireless sensor networks （WSN） provide an approachto collecting distributed monitoring data and transmiting them tothe sink node. This paper proposes a WSN-based multi-hop networkinfrastructure, to increase network lifetime by optimizing therouting strategy. First, a network model is established, an operatingcontrol strategy is devised, and energy consumption characteristicsare analyzed. Second, a fast route-planning algorithm isproposed to obtain the original path that takes into account the remainingenergy of communicating nodes and the amount of energyconsumed in data transmission. Next, considering the amount ofenergy consumed by an individual node and the entire network,a criterion function is established to describe node performanceand to evaluate data transmission ability. Finally, a route optimizingalgorithm is proposed to increase network lifetime by adjusting thetransmission route in protection of the weak node （the node withlow transmission ability）. Simulation and comparison experimentalresults demonstrate the good performance of the proposed algorithmsto increase network lifetime.

Analysis of Hops Length in Wireless Sensor Networks

Wireless sensor networks are provided with a limited source of power. The lifetime of such networks is an overwhelming matter in most network applications. This lifetime depends strongly on how efficiently such energy is distributed over the nodes especially during transmitting and receiving data. Each node may route messages to destination nodes either through short hops or long hops. Optimizing the length of these hops may save energy, and therefore extend the lifetime of WSNs. In this paper, we propose a theorem to optimize the hop’s length so to make WSN power consumption minimal. The theorem establishes a simple condition on hop’s length range. Computer simulation when performing such condition on Mica2 sensors and Mica2dot sensors reveals good performance regarding WSNs energy consumption.

Mobile Positioning System Based on the Wireless Sensor Network in Buildings

Established on the Intel Multi-Core Embedded platform, using 802.11 Wireless Network protocols as the communication medium, combining with Radio Frequency-Communication and Ultrasonic Ranging, imple-ment a mobile terminal system in an intellectualized building. It can provide its holder such functions: 1) Accurate Positioning 2) Intelligent Navigation 3) Video Monitoring 4) Wireless Communication. The inno-vative point for this paper is to apply the multi-core computing on the embedded system to promote its com-puting speed and give a real-time performance and apply this system into the indoor environment for the purpose of emergent event or rescuing.

Registration algorithm for sensor alignment based on stochastic fuzzy neural network

Multiple sensor registration is an important link in multi-sensors data fusion. The existed algorithm is all based on the assumption that system errors come from a fixed deviation set. But there are many other factors, which can result system errors. So traditional registration algorithms have limitation. This paper presents a registration algorithm for sensor alignment based on stochastic fuzzy neural network (SNFF), and utilized fuzzy clustering algorithm obtaining the number of fuzzy rules. Finally, the simulative result illuminate that this way could gain a satisfing result.

An Improved Energy Balanced Dissimilar Clustered Routing Architecture for Wireless Sensor Networks

In wireless sensor networks, clustering of nodes effectively conserves considerable amount of energy resulting in increased network life-time. Clustering protocols do not consider density of nodes in cluster formation, which increases the possibility of hotspots in areas where the density of nodes is very less. If the node density is very high, cluster-heads may expend high energy leading to their early death. Existing cluster protocols that concentrate on energy conservation have not exhibited their impact on packet delivery and delay. In this proposed protocol, clusters are constructed based on the range of nodes, distance between neighbouring nodes and density of nodes over a region resulting in the formation of dissimilar clusters. With this method, the entire sensing region is considered to be a large circular region with base station positioned at the centre. Initially, the nodes that can be able to reach base station in a single hop are considered for constructing inner smaller circular regions over the entire region. This method is iterated for n-hop nodes until n-concentric circular regions are formed. These circular boundaries are reconstructed based on a distance metric, density of nodes and a divergence factor. Using this architecture, network analysis is done by routing data to the base station from different sized clusters. Based on simulation results, this new protocol Dynamic Unequal Clustered Routing (D-UCR), despite being energy efficient, showed better data delivery ratio and minimized delay when compared with other traditional clustering algorithms such as Leach and Equal Clustered Routing.

Wavelet Transform for Image Compression Using Multi-Resolution Analytics: Application to Wireless Sensors Data

The aggregation of data in recent years has been expanding at an exponential rate. There are various data generating sources that are responsible for such a tremendous data growth rate. Some of the data origins include data from the various social media, footages from video cameras, wireless and wired sensor network measurements, data from the stock markets and other financial transaction data, supermarket transaction data and so on. The aforementioned data may be high dimensional and big in Volume, Value, Velocity, Variety, and Veracity. Hence one of the crucial challenges is the storage, processing and extraction of relevant information from the data. In the special case of image data, the technique of image compressions may be employed in reducing the dimension and volume of the data to ensure it is convenient for processing and analysis. In this work, we examine a proof-of-concept multiresolution analytics that uses wavelet transforms, that is one popular mathematical and analytical framework employed in signal processing and representations, and we study its applications to the area of compressing image data in wireless sensor networks. The proposed approach consists of the applications of wavelet transforms, threshold detections, quantization data encoding and ultimately apply the inverse transforms. The work specifically focuses on multi-resolution analysis with wavelet transforms by comparing 3 wavelets at the 5 decomposition levels. Simulation results are provided to demonstrate the effectiveness of the methodology.

Lifetime Optimization via Network Sectoring in Cooperative Wireless Sensor Networks

Employing cooperative communication in multihop wireless sensor networks provides the network with significant energy efficiency. However, the lifetime of such a network is directly dependant upon the lifetime of each of its individual sections (or clusters). Ignoring the fact that those sections close to sink have to forward more data (their own data plus the data received from the previous sections) and hence die sooner with considering equal section sizes, leads to a sub-optimal lifetime. In this paper, we optimize the section sizes of a multihop cooperative WSN so that it maximizes the network lifetime. Simulation results demonstrate a significant lifetime enhancement for the proposed optimal sectoring.

基于几何的星载探测雷达组网空中目标高度估计算法

星载探测雷达具有全球覆盖、全天候、全天时、不易受到攻击等优点,在预警防御系统中具有巨大潜力。单个星载探测雷达由于俯仰角误差过大,导致其不具备空中目标高度估计能力;准确的目标高度估计对改善目标定位精度及威胁估计能力等具有重要意义。考虑多部星载探测雷达组网,提出了一种基于几何的空中目标高度估计方法,并通过仿真验证方法的有效性。通过仿真比较了雷达探测区域不同位置目标高度估计精度的差别,为组网雷达系统设计等提供技术支撑。