Towards integrated mode-division demultiplexing spectrometer by deep learning

Miniaturized spectrometers have been widely researched in recent years,but few studies are conducted with on-chip multimode schemes for mode-division multiplexing(MDM)systems.Here we propose an ultracompact mode-division demultiplexing spectrometer that includes branched waveguide structures and graphene-based photodetectors,which realizes simultaneously spectral dispersing and light fields detecting.In the bandwidth of 1500-1600 nm,the designed spectrometer achieves the single-mode spectral resolution of 7 nm for each mode of TE_(1)-TE_(4) by Tikhonov regularization optimization.Empowered by deep learning algorithms,the 15-nm resolution of parallel reconstruction for TE_(1)-TE_(4) is achieved by a single-shot measurement.Moreover,by stacking the multimode response in TE_(1)-TE_(4) to the single spectra,the 3-nm spectral resolution is realized.This design reveals an effective solution for on-chip MDM spectroscopy,and may find applications in multimode sensing,interconnecting and processing.

Compact and high-efficient wavelength demultiplexing coupler based on high-index dielectric nanoantennas

Wavelength demultiplexing waveguide couplers have important applications in integrated nanophotonic devices. Two of the most important indicators of the quality of a wavelength demultiplexing coupler are coupling efficiency and splitting ratio. In this study, we utilize two asymmetric high-index dielectric nanoantennas directly positioned on top of a silicon-on insulator waveguide to realize a compact wavelength demultiplexing coupler in a communication band, which is based on the interference of the waveguide modes coupled by the two nanoantennas. We add a Au substrate for further increasing the coupling efficiency. This has constructive and destructive influences on the antenna＇s in-coupling efficiency owing to the Fabry-Perot（FP） resonance in the SiO2 layer. Therefore, we can realize a wavelength demultiplexing coupler with compact size and high coupling efficiency. This coupler has widespread applications in the areas of wavelength filters,on-chip signal processing, and integrated nanophotonic circuits.

2.5Gb/s Monolithic IC of Clock Recovery,Data Decision,and 1∶4 Demultiplexer

A high integrated monolithic IC, with functions of clock recovery, data decision, and 1 ： 4 demultiplexer,is implemented in 0.25μm CMOS process for 2.5Gb/s fiber-optic communications. The recovered and frequency divided 625MHz clock has a phase noise of -106.26dBc/Hz at 100kHz offset in response to a 2.5Gb/s PRBS input data （2^31-1）. The 2.5Gb/s PRBS data are demultiplexed to four 625Mb/s data. The 0.97mm× 0.97mm IC consumes 550mW under a single 3.3V power supply （not including output buffers）.

20Gb/s 1∶2 Demultiplexer in 0.18μm CMOS

A 1 ：2 demultiplexer is designed and realized in standard 0. 18μm CMOS technology. A novel high-speed and low-voltage latch is used to realize the core circuit cell. Compared to the traditional source-coupled FET logic structure latch, its power supply voltage is lower and the speed is faster. In addition, the negative feedback is used in the buffer circuit to widen its bandwidth. Measurement results show that the chip can work at the data rate of 20Gb/ s. The supply voltage is 1.8V and the current,including the buffer circuit, is 72mA.

A kind of low-power 10 Gbit/s CMOS 1∶4 demultiplexer

A 10 Gbit/s 1：4 demultiplexer（DEMUX） fabricated in 0. 18 μm CMOS （complementary metal-oxidesemiconductor transistor） technology for optical-fiber-link is presented. The system is constructed in tree-type structure and it includes a high-speed 1 ： 2 DEMUX, two low-speed 1 ： 2 DEMUXs, a divider, and input and output buffers for data and dock. To improve the circuit performance and reduce the power consumption, a latch structure with a common-gate topology and a single clock phase is employed in the high-speed 1 ： 2 DEMUX and the 5 GHz 1 ： 2 on-chip frequency divider, while dynamic CMOS logic is adopted in the low-speed l ： 2 DEMUXs. Measured results at 10 Gbit/s by 23^31 -1 pseudo random bit sequences （PRBS） via on-wafer testing indicate that it can work well with a power dissipation of less than 100 mW at 1.8 V supply voltage. The die area of the DEMUX is 0. 65 mm × 0. 75 mm.

12Gb/s 0.25μm CMOS Low-Power 1∶4 Demultiplexer

A low power 12Gb/s single-stage 1 ： 4 demultiplexer （DEMUX） applied in SONET OC-192 is realized in TSMC＇s mix-signal 0. 25μm CMOS. All of the circuits are in source coupled FET logic （SCFL） to achieve as high a speed as possible and suppress common mode distortions. This DEMUX is featured for achieving singlestage demultiplexing by using a quarter-rate IQ clock. This method not only reduces the components of the DEMUX but also lowers its power dissipation. The fabricated DEMUX operates error free at 12Gb/s by 231 - 1 pseudorandom bit sequences in on-wafer testing. The chip size is 0. 9mm × 0.9mm and the power dissipation is only 210mW with a single 2.5V supply.

20 Gbit/s 1∶2 demultiplexer of low-power using 0.18 μm CMOS

A 1 ： 2 demultiplexer（DEMUX） that is fabricated using 0. 18 μm CMOS （complementary metaloxide-semiconductor transistor） technology is presented. The DEMUX consists of a master-slave-slave, masterslave D flip-flops and output buffers. The D flip-flop employs a dynamic-loading structure and common-gate topology with single clock phase for the bias transistors. The dynamic-loading structure can make the circuit work faster because it decreases the charge/discharge time of the output node, and it consumes lower power because its working current is in a switch mode. In addition, the positive feedback loop, which is made up of a cross-coupled transistor pair in the latch, speeds up the circuit. Measurement results at 20 Gbit/s 2^23 - 1 pseudo random bit sequence （PRBS） via on-wafer testing show that the 1： 2 DEMUX can operate well. The power dissipation is 108 mW with the area of 475μm×578μm.

10 Gbit/s 0.25μm CMOS 1∶4 demultiplexer

A 10 Gbit/s (STM-64, OC-192) 1:4 demultiplexer (DEMUX) with 4-phase clock wasachieved in TSMC's standard 0.25 μm complementary metal-oxide-semiconductor (CMOS) technique. Allof the circuits are in source coupled FET logic (SCFL) to achieve as high as possible speed andsuppress common mode distortions. This DEMUX is featured by constant-delay buffers to generate a4-phase clock and adjust skews of the four channel outputs. The fabricated DEMUX operates error freeat 10 Gbit/s by 2^(31) -1 pseudorandom bit sequences (PRBS) via on-wafer testing. The measured rootmean square (rms) jitter, rising and failing edge of the eye-diagram are 11, 123 and 137 ps,respectively. The chip size is 0.9 mm x 1.2 mm and the power dissipation is 550 mW with a 3. 3 Vsupply.

基于Multi-Agent的无人机集群体系自主作战系统设计

针对无人集群自主作战体系设计中的关键问题,提出基于Multi-Agent的无人集群自主作战系统设计方法。建立无人集群各节点的Agent模型及其推演规则;对于仿真系统模块化和通用化的需求,设计系统互操作式接口和无人集群自主作战的交互关系;开展无人集群系统仿真推演验证。仿真结果表明,所提设计方案不仅能够有效开展并完成自主作战网络生成-集群演化-效能评估的全过程动态演示验证,而且能够通过重复随机试验进一步评估无人集群的协同作战效能,最后总结了集群协同作战的策略和经验。

Semi-vectorial analysis of a compact wavelength demultiplexer based on the tapered multimode interference coupler

Based on a parabolically tapered multimode interference （MMI） coupler with a deep-etched SiO2/SiON rib waveguide, a compact wavelength demultiplexer operating at 1.30 and 1.55 μm wavelengths is proposed and analysed by using three-dimensional semi-vectorial finite-difference beam propagation method （3D-SV-FD-BPM）. The results show that a MMI section of 330.0 μm in length, which is only 76% length of a straight MMI coupler, is achieved with the contrasts of 42.3 and 39.2dB in quasi-TE mode, and 38.4 and 37.8dB in quasi-TM mode at wavelengths 1.30 and 1.55μm, respectively, and the insertion losses below 0.2dB at both wavelengths and in both polarization states, The alternating direction implicit algorithm with the Crank-Nicholson scheme is applied to the discretization of the 3D-SV-FD-BPM formulation along the longitudinal direction. Moreover, a modified FD scheme is constructed to approximate the resulting equations along the transverse directions, in which the discontinuities of the derivatives of magnetic field components Hy and Hx along the vertical and horizontal interfaces, respectively, are involved.

联合物理层与MAC层的multi-TRP上行重叠传输处理机制

针对非理想回程下现有协议难以有效处理多传输接收节点(multi-TRP)场景中多定时提前(multi-TA)导致的严重上行链路(UL)重叠传输问题,联合改进物理层复用技术和介质访问控制(MAC)令牌桶技术,提出了一种新型的UL重叠传输处理机制。该新型机制通过改进物理层重叠信道识别流程、复用要求及复用规则,将物理层复用信息与重叠信息反馈至MAC层,并对MAC层令牌桶技术进行优化。通过仿真实验对所提机制与现有协议机制进行对比,结果表明,在逻辑时隙不可重叠和可重叠2种情形下,物理上行控制信道(PUCCH)实际复用数量性能平均提升了57.58%和49.40%,物理上行共享信道(PUSCH)实际可用资源数量性能平均提升了12.09%和26.03%;优先级最高逻辑信道实际占用资源数量性能平均提升了33.33%和45.48%。

基于Multi-Agent的水电站变压器故障诊断系统

为了精准、快速完成水电站变压器的故障诊断,设计基于Multi-Agent的水电站变压器故障诊断系统。变压器状态监控agent将检测到的变压器故障信息发送给系统管理agent,系统管理agent通过通信agent将变压器故障信息发送给变压器故障诊断agent,变压器故障诊断agent利用小波变换方法提取变压器故障特征,并将其作为IFOA-SVM模型输入,完成变压器故障分类后,获取变压器故障诊断结果,该结果通过通信agent显示给用户。实验表明,该系统可有效诊断变压器故障诊断,诊断成功率受系统故障信息丢失率的影响较小,诊断耗时、耗能小,并具有较高故障诊断成功率。

Designing thermal demultiplexer: Splitting phonons by negative mass and genetic algorithm optimization

We propose the concept of thermal demultiplexer, which can split the heat flux in different frequency ranges intodifferent directions. We demonstrate this device concept in a honeycomb lattice with dangling atoms. From the view ofeffective negative mass, we give a qualitative explanation of how the dangling atoms change the original transport property.We first design a two-mass configuration thermal demultiplexer, and find that the heat flux can flow into different ports incorresponding frequency ranges roughly. Then, to improve the performance, we choose the suitable masses of danglingatoms and optimize the four-mass configuration with genetic algorithm. Finally, we give out the optimal configuration witha remarkable effect. Our study finds a way to selectively split spectrum-resolved heat to different ports as phonon splitter,which would provide a new means to manipulate phonons and heat, and to guide the design of phononic thermal devices inthe future.

High-performance and fabrication friendly polarization demultiplexer

A compact and fabrication friendly polarization demultiplexer(P-DEMUX) is proposed and characterized to enable wavelength-division-multiplexing and polarization-division-multiplexing simultaneously. The proposed structure is composed of a polarization-selective microring resonator in ultrathin waveguide and two bus channels in the silicon nitridesilica-silicon horizontal slot waveguides. In the slot waveguide, the transverse electric(TE) mode propagates through the silicon layer, while the transverse magnetic(TM) mode is confined in the slot region. In the designed ultra-thin waveguide, the TM mode is cut-off. The effective indexes of the TE modes for ultrathin and slot waveguides have comparable values. Thanks for these distinguishing features, the input TE mode can be efficiently filtered through the ultra-thin microring at the resonant wavelength, while the TM mode can directly output from the through port. Simulation results show that the extinction ratio of the proposed P-DEMUX for TE and TM modes are 33.21 dB and 24.97 dB, and the insertion losses are 0.346 dB and 0.324 dB, respectively, at the wavelength of 1551.64 nm. Furthermore, the device shows a broad bandwidth(> 100 nm) for an extinction ratio(ER) of > 20 dB. In addition, the proposed P-DEMUX also has a good fabrication tolerance for the waveguide width variation of-20 nm≤ △w_(g)≤ 20 nm and the microring width variation of -20 nm≤ △w_(r) ≤20 nm for a low insertion loss of < 0.75 dB and low ER of <-18 dB.

Erratum to“Designing thermal demultiplexer:Splitting phonons by negative mass and genetic algorithm optimization”

Equations(8)and(9)in the original paper[Chin.Phys.B 30036301(2021)]are corrected.

Bound in continuum states and induced transparency in mesoscopic demultiplexer with two outputs

We investigate the electronic transport in a simple mesoscopic cross structure made of two wires(stubs)grafted at the same point along a quantum waveguide.We show that the structure may exhibit important phenomena such as bound in continuum(BIC)states.These states are transformed into electromagnetically induced transparency(EIT)resonance by detuning slightly the lengths of the stubs.The last phenomenon is used to propose and study a mesoscopic demultiplexer device with an input waveguide and two output waveguides.We give closed-form expressions of the geometrical parameters that allow a selective transfer of a given state in the first waveguide without perturbing the second waveguide.The effect of temperature on the transmission resonances is also examined by using Landauer-Büttiker formula.The analytical results of the dispersion relation and transmission and reflection coefficient are obtained using the Green's function method.

All-Optical 3:8 Decoder with the Help of Terahertz Optical Asymmetric Demultiplexer

An all-optical 3:8 decoder unit with the help of terahertz optical asymmetric demultiplexer (TOAD) is proposed. The all-optical 3:8 decoder unit with a set of all-optical full-adders and optical exclusive-ORs (XORs), can be used to perform a fast central processor unit using optical hardware components. We try to exploit the advantages of TOAD-based optical switch to design an integrated all-optical circuit which can perform decoding of signal. A theoretical model is presented and verified through numerical simulation. The new method promises both higher processing speed and accuracy. The model can be extended for studying more complex all-optical circuit of enhanced functionality in which decoder is the basic building block. The operation of the proposed circuit is parallel in nature. The impact of the switching energy with small signal gain and variation of extinction ratio and contrast ration with control pulse energy of the switching outcome is explored and assessed by means of numerical simulations.

Optical Arithmetic Operation Using Optical Demultiplexer

Using Terahertz Optical Asymmetric Demultiplexer (TOAD) based switch we have designed all-optical parallel half adder and full adder. The approach to design this all-optical arithmetic circuit not only enhances the computational speed but also is capable of synthesizing light as input to produce desire output. The main advantage of parallel circuit is synchronization of input which is not required. All the circuits are designed theoretically and verified through numerical simulations.

Design of 2-to-4 All-Optical Decoder with the Help of Terahertz Optical Asymmetric Demultiplexer

An all-optical 2-to-4 decoder unit with the assist of terahertz optical asymmetric demultiplexer (TOAD) is presented. The all-optical 2-to-4 decoder with a set of all-optical switches is designed which can be used to achieve a high-speed central processor unit using optical hardware. The unique output lines can be used for all-optical header processing. We attempt to develop an integrated all-optical circuit which can perform decoding of signal. This scheme is very simple and flexible for performing different logic operation and to design advanced complex logic. Simulated results are confirming the described methods.

Multi Location Field Evaluation of BC1F2 Sorghum Populations for Striga Resistance in Niger

In Niger, a landlocked country, sorghum is the second staple food cultivated over the country by smallholder farmer. The crop is important for human and animal consumption. Despite its importance, the crop is affected by biotic and abiotic constraints. Among those constraints, striga has a high impact on yield. In fact, to survive, farmers are growing their local preferred sorghum varieties wish is highly sensible to the weed. Striga management is a challenge that requires a permanent solution. In addition, the development of high-yielding Striga resistant genotypes will be appreciated by farmers. The development of striga resistance will be based on the breeding population performances under farmer’s diverse environmental conditions adaptation. The main objective of this study is to evaluate two breeding populations for striga resistance in two different environments at Boulke and Dibissou in Tahoua region, to identify the early and high-yielding striga tolerant genotypes under natural infestation.