Very high frequency(VHF) photocathode guns have excellent performance and are being increasingly selected as electron sources for high-repetition-rate X-ray free-electron lasers. As a highly loaded quality factor cavi...Very high frequency(VHF) photocathode guns have excellent performance and are being increasingly selected as electron sources for high-repetition-rate X-ray free-electron lasers. As a highly loaded quality factor cavity, the VHF gun requires high stability in the amplitude and phase of the cavity field. However, the gun is microwave powered by two solid-state power sources through two separate power couplers. The input difference between the two power couplers will influence the stability of the cavity field. To systematically study this influence and obtain measurement formulae, a multi-port VHF gun LCR circuit model is built and analyzed. During the warm-up condition, the cavity structure will be deformed due to the large-scale change in the cavity temperature. Then, the deformation will result in cavity resonant frequency changes. To prevent the mechanic tuner from suffering damages due to the frequent and long-distance movement for correcting the cavity resonant frequency, a self-excited loop(SEL) control system is considered for changing the loop phase and make the loop frequency follow the resonant frequency. In this study, a steady-state model of the VHF gun cavity is built for obtaining the optimal input coupler coefficient and the stability requirement of the forward voltage. Then, the generator-driven resonator and SEL control system, which combine with the VHF multiport modeling, are modeled and simulated. The simulated results show that the SEL system can perfectly operate in the process of condition and warm-up.展开更多
-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model te...-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model test for a port. The test results show that a deep navigation channel has a large effect on the waves in front of the breakwater near the port entrance and on the wave condition in the port.展开更多
A new simple method in which arbitrary transfer function matrix is realized withactive multiple port network instead of computer simulating is proposed. The active multipleport network is carried on through state feed...A new simple method in which arbitrary transfer function matrix is realized withactive multiple port network instead of computer simulating is proposed. The active multipleport network is carried on through state feedback and state cross output for RC ladder network.The main process is to determine coefficients of each adder. Finally, an example is given forillustration.展开更多
This paper presents a potable renewable energy system. The portable renewable energy power unit is designed from a need. The need is for first response teams in remote natural disaster situations to have a reliable so...This paper presents a potable renewable energy system. The portable renewable energy power unit is designed from a need. The need is for first response teams in remote natural disaster situations to have a reliable source of energy to power a small vaccine refrigerator or water purification system and a basic satellite communication system. It is important that such a need is explored as a practical solution has the potential to save the lives of people in remote areas, who would otherwise suffer from a lack of humanitarian aid. Currently diesel generators are the primary source of electricity generation for disaster responders and in most situations work very well and provide a sufficient amount of electricity to meet the power needs. However, in remote areas road infrastructure is often damaged. In this type of situation getting a constant supply of diesel to the area is an expensive or impractical operation. This is where the portable renewable energy power unit bridges the gap and allows a more practical solution to be implemented. The specific aim of the work is to design a compact, stand-alone, product that can be easily transported by people across uneven terrain. It can generate power from wind, solar and hydro energy sources. In this work a new non-isolated multiport DC-DC converter topology for a hybrid energy system in low power applications is proposed. The new topology assimilates multiple renewable energy sources and power up multiple loads with different output levels. A complete Solid works model and FEA analysis, on required components, is completed. The scope of the work encompasses both the electrical and mechanical design of the system.展开更多
For Hall plates, the ratio of signal over thermal noise is determined by material properties, thickness, layout geometry, magnetic field, and the electric power at which the plate is operated. For traditional Hall pla...For Hall plates, the ratio of signal over thermal noise is determined by material properties, thickness, layout geometry, magnetic field, and the electric power at which the plate is operated. For traditional Hall plates with four contacts, the optimum choice is a symmetrical device with medium-sized contacts. This paper shows that the signal-to-noise-ratio (<em>SNR</em>) can be further increased by up to 90% for Hall plates with more than four contacts. Supply currents flow through several pairs of contacts, while a signal conditioning circuit taps output voltages at all pairs of contacts and sums them up. We compute the total thermal noise of the sum of correlated noise voltages and relate it to the total magnetic sensitivity. We also prove that for electrically linear devices a spinning current scheme cancels out zero point errors (offset errors) in a strict sense. All our investigations use the definite resistance matrix of multi-port Hall plates. We develop an analytical theory based on recent advances in the theory of Hall plates, and then we compute the integrals and matrices numerically for symmetrical Hall plates with six to 40 contacts. We also present measurements in accordance with our theory.展开更多
This paper presents a framework of the distributed concurrent multi-port-testing test system (CMPT-TS) for IP routers under development at Sichuan Network Communication Key Laboratory. Having analyzed the actuality of...This paper presents a framework of the distributed concurrent multi-port-testing test system (CMPT-TS) for IP routers under development at Sichuan Network Communication Key Laboratory. Having analyzed the actuality of concurrent testing for routers, this paper develops a distributed architecture of CMPT-TS and discusses its functional components in detail. Moreover, a new test definition language, CMPT definition language, is also introduced simply.展开更多
文摘Very high frequency(VHF) photocathode guns have excellent performance and are being increasingly selected as electron sources for high-repetition-rate X-ray free-electron lasers. As a highly loaded quality factor cavity, the VHF gun requires high stability in the amplitude and phase of the cavity field. However, the gun is microwave powered by two solid-state power sources through two separate power couplers. The input difference between the two power couplers will influence the stability of the cavity field. To systematically study this influence and obtain measurement formulae, a multi-port VHF gun LCR circuit model is built and analyzed. During the warm-up condition, the cavity structure will be deformed due to the large-scale change in the cavity temperature. Then, the deformation will result in cavity resonant frequency changes. To prevent the mechanic tuner from suffering damages due to the frequent and long-distance movement for correcting the cavity resonant frequency, a self-excited loop(SEL) control system is considered for changing the loop phase and make the loop frequency follow the resonant frequency. In this study, a steady-state model of the VHF gun cavity is built for obtaining the optimal input coupler coefficient and the stability requirement of the forward voltage. Then, the generator-driven resonator and SEL control system, which combine with the VHF multiport modeling, are modeled and simulated. The simulated results show that the SEL system can perfectly operate in the process of condition and warm-up.
文摘-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model test for a port. The test results show that a deep navigation channel has a large effect on the waves in front of the breakwater near the port entrance and on the wave condition in the port.
文摘A new simple method in which arbitrary transfer function matrix is realized withactive multiple port network instead of computer simulating is proposed. The active multipleport network is carried on through state feedback and state cross output for RC ladder network.The main process is to determine coefficients of each adder. Finally, an example is given forillustration.
文摘This paper presents a potable renewable energy system. The portable renewable energy power unit is designed from a need. The need is for first response teams in remote natural disaster situations to have a reliable source of energy to power a small vaccine refrigerator or water purification system and a basic satellite communication system. It is important that such a need is explored as a practical solution has the potential to save the lives of people in remote areas, who would otherwise suffer from a lack of humanitarian aid. Currently diesel generators are the primary source of electricity generation for disaster responders and in most situations work very well and provide a sufficient amount of electricity to meet the power needs. However, in remote areas road infrastructure is often damaged. In this type of situation getting a constant supply of diesel to the area is an expensive or impractical operation. This is where the portable renewable energy power unit bridges the gap and allows a more practical solution to be implemented. The specific aim of the work is to design a compact, stand-alone, product that can be easily transported by people across uneven terrain. It can generate power from wind, solar and hydro energy sources. In this work a new non-isolated multiport DC-DC converter topology for a hybrid energy system in low power applications is proposed. The new topology assimilates multiple renewable energy sources and power up multiple loads with different output levels. A complete Solid works model and FEA analysis, on required components, is completed. The scope of the work encompasses both the electrical and mechanical design of the system.
文摘For Hall plates, the ratio of signal over thermal noise is determined by material properties, thickness, layout geometry, magnetic field, and the electric power at which the plate is operated. For traditional Hall plates with four contacts, the optimum choice is a symmetrical device with medium-sized contacts. This paper shows that the signal-to-noise-ratio (<em>SNR</em>) can be further increased by up to 90% for Hall plates with more than four contacts. Supply currents flow through several pairs of contacts, while a signal conditioning circuit taps output voltages at all pairs of contacts and sums them up. We compute the total thermal noise of the sum of correlated noise voltages and relate it to the total magnetic sensitivity. We also prove that for electrically linear devices a spinning current scheme cancels out zero point errors (offset errors) in a strict sense. All our investigations use the definite resistance matrix of multi-port Hall plates. We develop an analytical theory based on recent advances in the theory of Hall plates, and then we compute the integrals and matrices numerically for symmetrical Hall plates with six to 40 contacts. We also present measurements in accordance with our theory.
文摘This paper presents a framework of the distributed concurrent multi-port-testing test system (CMPT-TS) for IP routers under development at Sichuan Network Communication Key Laboratory. Having analyzed the actuality of concurrent testing for routers, this paper develops a distributed architecture of CMPT-TS and discusses its functional components in detail. Moreover, a new test definition language, CMPT definition language, is also introduced simply.
