RECENT PROGRESS IN MULTI-BEAM KLYSTRON IN IECAS

Recent research progresses in Multi-Beam Klystron (MBK) in IECAS are briefly introduced in the letter. The S-band MBKs of IECAS have peak power of 120-250 kW, average power of 4-9 kW, efficiency of 35-45%, gain of 41-46 dB, beam voltage of 15-19 kV, and weight of 40-45 kg. Some key technical problems of MBK are also described and discussed. Among them,improving the design of MBK to obtain the required bandwidth, raising beam transmission to increase average power, eliminating oscillation and spray spectrum, overcoming window breakdown caused by magic mode, reducing breakdown times of electrongun, are most important things for the practical MBK. Besides, further research work in MBK in IECAS is commented.

Development and testing of a high-power S-band klystron at BINP SB RAS

This paper details the development and testing of the first working prototype of the S-band high-power klystron,accomplished at the Budker Institute of Nuclear Physics,Siberian Branch,Russian Academy of Sciences(BINP SB RAS).Upon testing,the klystron demonstrated the following parameters:an operating frequency of 2856 MHz and a peak power output of 50 MW.The paper presents the klystron's design,its constituent units,and pertinent processing procedures,along with discussions on the measurement of its parameters.

Design and development of radio frequency output window for circular electron–positron collider klystron

This paper presents the first phase of design, analysis, and simulation for the klystron coaxial radio frequency（RF）output window. This study is motivated by 800 kW continuous wave（CW）, 650 MHz klystrons for the future plan of circular electron–positron collider（CEPC） project. The RF window which is used in the klystron output section has a function to separate the klystron from the inner vacuum side to the outside, and high RF power propagates through the window with small power dissipation. Therefore, the window is a key component for the high power klystron. However, it is vulnerable to the high thermal stress and multipacting, so this paper presents the window design and analysis for these problems. The microwave design has been performed by using the computer simulation technology（CST） microwave studio and the return loss of the window has been established to be less than-90 d B. The multipacting simulation of the window has been carried out using MultiPac and CST particles studio. Through the multipacting analysis, it is shown that with thin coating of TiN, the multipacting effect has been suppressed effectively on the ceramic surface. The thermal analysis is carried out using ANSYS code and the temperature of alumina ceramic is lower than 310 K with water cooling.The design result successfully meets the requirement of the CEPC 650 MHz klystron. The manufacturing and high power test plan are also described in this paper.

Joint Optimization of Satisfaction Index and Spectrum Efficiency with Cache Restricted for Resource Allocation in Multi-Beam Satellite Systems

Dynamic resource allocation(DRA) is a key technology to improve system performances in GEO multi-beam satellite systems. And, since the cache resource on the satellite is very valuable and limited, DRA problem under restricted cache resources is also an important issue to be studied. This paper mainly investigates the DRA problem of carrier resources under certain cache constraints. What's more, with the aim to satisfy all users' traffic demands as more as possible, and to maximize the utilization of the bandwidth, we formulate a multi-objective optimization problem(MOP) where the satisfaction index and the spectrum efficiency are jointly optimized. A modified strategy SA-NSGAII which combines simulated annealing(SA) and non-dominated sorted genetic algorithm-II(NSGAII) is proposed to approximate the Pareto solution to this MOP problem. Simulation results show the effectiveness of the proposed algorithm in terms of satisfaction index, spectrum efficiency, occupied cache, and etc.

Multiple sub-array beamspace CAATI algorithm for multi-beam bathymetry system

This paper extends CAATI （Computed Angle-of-Arrival Transient Imaging） technique of Multi-angle Swath Bathymetry Sidesean Sonar （MSBSS） into Multi-Beam Bathymetry Sonar （MBBS） and presents a new Multiple Sub-array Beamspaee - CAATI （MSB-CAATI） algorithm. The method not only can achieve high resolution seafloor mapping in the whole wide swath, but also can work well in complex acoustic environments or geometries. Simulation results and processing results of sea-experiment data prove the validity and superiority of the algorithm.

User-Level Scheduling and Resource Allocation for Multi-Beam Satellite Systems with Full Frequency Reuse

Multi-beam satellite communication systems can improve the resource utilization and system capacity effectively.However,the inter-beam interference,especially for the satellite system with full frequency reuse,will degrade the system performance greatly due to the characteristics of multi-beam satellite antennas.In this article,the user scheduling and resource allocation of a multi-beam satellite system with full frequency reuse are jointly studied,in which all beams can use the full bandwidth.With the strong inter-beam interference,we aim to minimize the system latency experienced by the users during the process of data downloading.To solve this problem,deep reinforcement learning is used to schedule users and allocate bandwidth and power resources to mitigate the inter-beam interference.The simulation results are compared with other reference algorithms to verify the effectiveness of the proposed algorithm.

Design and high-power test of 800-kW UHF klystron for CEPC

To reduce the energy demand and operation cost for circular electron positron collider(CEPC), the high efficiency klystrons are being developed at Institute of High Energy Physics, Chinese Academy of Sciences. A 800-k W continuous wave(CW) klystron operating at frequency of 650-MHz has been designed. The results of beam–wave interaction simulation with several different codes are presented. The efficiency is optimized to be 65% with a second harmonic cavity in three-dimensional(3D) particle-in-cell code CST. The effect of cavity frequency error and mismatch load on efficiency of klystron have been investigated. The design and cold test of reentrant cavities are described, which meet the requirements of RF section design. So far, the manufacturing and high-power test of the first klystron prototype have been completed.When the gun operated at DC voltage of 80 k V and current of 15.4 A, the klystron peak power reached 804 k W with output efficiency of about 65.3% at 40% duty cycle. The 1-d B bandwidth is ±0.8 MHZ. Due to the crack of ceramic window, the CW power achieved about 700 kW. The high-power test results are in good agreement with 3D simulation.

Multi-Objective Deep Reinforcement Learning Based Time-Frequency Resource Allocation for Multi-Beam Satellite Communications

Resource allocation is an important problem influencing the service quality of multi-beam satellite communications.In multi-beam satellite communications, the available frequency bandwidth is limited, users requirements vary rapidly, high service quality and joint allocation of multi-dimensional resources such as time and frequency are required. It is a difficult problem needs to be researched urgently for multi-beam satellite communications, how to obtain a higher comprehensive utilization rate of multidimensional resources, maximize the number of users and system throughput, and meet the demand of rapid allocation adapting dynamic changed the number of users under the condition of limited resources, with using an efficient and fast resource allocation algorithm.In order to solve the multi-dimensional resource allocation problem of multi-beam satellite communications, this paper establishes a multi-objective optimization model based on the maximum the number of users and system throughput joint optimization goal, and proposes a multi-objective deep reinforcement learning based time-frequency two-dimensional resource allocation(MODRL-TF) algorithm to adapt dynamic changed the number of users and the timeliness requirements. Simulation results show that the proposed algorithm could provide higher comprehensive utilization rate of multi-dimensional resources,and could achieve multi-objective joint optimization,and could obtain better timeliness than traditional heuristic algorithms, such as genetic algorithm(GA)and ant colony optimization algorithm(ACO).

Numerical investigation of multi-beam laser heterodyne measurement with ultra-precision for linear expansion coefficient of metal based on oscillating mirror modulation

This paper proposes a novel method of multi-beam laser heterodyne measurement for metal linear expansion coefficient. Based on the Doppler effect and heterodyne technology, the information is loaded of length variation to the frequency difference of the multi-beam laser heterodyne signal by the frequency modulation of the oscillating mirror, this method can obtain many values of length variation caused by temperature variation after the multi-beam laser heterodyne signal demodulation simultaneously. Processing these values by weighted-average, it can obtain length variation accurately, and eventually obtain the value of linear expansion coefficient of metal by the calculation. This novel method is used to simulate measurement for linear expansion coefficient of metal rod under different temperatures by MATLAB, the obtained result shows that the relative measurement error of this method is just 0.4%.

Handover initiation performance of a new multi-cell cellular configuration with a developed base-station multi-beam antenna

A new multi-cell cellular configuration networks is provided for analysis of handover initiation probability, which is based on multi-beam base-station antenna splitting in the elevation-radiating plane. The sum of the received signal power in the mobile station, including both desired and interference signal power, has been introduced into the handover initiation algorithm. Along with the idea, we present three models of handover initiation algorithm with the shadowing process of Gaussian distribution. The formulation of handover initiation probability of those algorithms is also analyzed. The validity of the presented models has been checked through the comparison with simulation results. The results present the performance characteristics of handover initiation vary with cluster number and base-station antenna elevation angle.

DEVELOPMENT OF 50MW S-BAND KLYSTRON

This letter reports the development of a 50MW S-band klystron in the Institute of Electronics, Chinese Academy of Sciences （IECAS）. It adopted a structure of six-cavity and single output window. Under conditions of an RF （Radio Frequency） pulse width of 4t, ts, a beam voltage of 305,9kV and a beam current of 368A, the peak output power has achieved 51.4MW with an efficiency of 45.6% and a gain of 54dB.

Impact of Phase Noise on TDMS Based Calibration for Spaceborne Multi-Beam Antennas

For spaceborne multi-beam antennas(MBAs), time division multiplexed switching(TDMS) based calibration receiver can reduce implementation costs effectively and is very suitable for large-scale applications. However, in practice, random phase noise imposed by noisy local oscillators can cause significant performance degradation in TDMS-based calibration systems. Characterization of phase noise effects is therefore crucial for practical applications. In this paper, we analyze the impact of phase noise on the calibration performance for a MBA system. Specifically, we derive the relationship between the probability of correct amplitude/phase estimation and various practical factors involving the signal-to-noise ratio(SNR), the standard deviation of phase noise, the given tolerance region, and the length of the spreading code. The results provide high efficiency for evaluating the calibration performance of the MBAs based on TDMS, especially for precisely anticipating the impact of phase noise. Finally, the accuracy of the derived results is assessed by simulations in different scenarios.

Landslide data mosaicking based on an airborne laser point cloud and multi-beam sonar images

Landslides are one of the most disastrous geological hazards in southwestern China.Once a landslide becomes unstable,it threatens the lives and safety of local residents.However,empirical studies on landslides have predominantly focused on landslides that occur on land.To this end,we aim to investigate ashore and underwater landslide data synchronously.This study proposes an optimized mosaicking method for ashore and underwater landslide data.This method fuses an airborne laser point cloud with multi-beam depth sounder images.Owing to their relatively high efficiency and large coverage area,airborne laser measurement systems are suitable for emergency investigations of landslides.Based on the airborne laser point cloud,the traversal of the point with the lowest elevation value in the point set can be used to perform rapid extraction of the crude channel boundaries.Further meticulous extraction of the channel boundaries is then implemented using the probability mean value optimization method.In addition,synthesis of the integrated ashore and underwater landslide data angle is realized using the spatial guide line between the channel boundaries and the underwater multibeam sonar images.A landslide located on the right bank of the middle reaches of the Yalong River is selected as a case study to demonstrate that the proposed method has higher precision thantraditional methods.The experimental results show that the mosaicking method in this study can meet the basic needs of landslide modeling and provide a basis for qualitative and quantitative analysis and stability prediction of landslides.

Reconstruction of -35 kV/200 kW HVPS for Test of Klystron Units in LHCD System

The paper introduces the -35 kV/200 kW high voltage power supply (HVPS) which is specially used to test klystron units in LHCD system. The new klystrons must be tested under high voltage level before operation and the old klystrons which have worked for a longtime must be exercised by HVPS in lower hybrid current drive (LHCD) system. As the former HVPS has some shortages in engineering design and operation design, the HVPS has to be modified and rebuilt by adopting new method and technology to solve existing bottle-neck problems.

METHODS FOR IMPROVING EQUIDRIVING POWER-FREQUENCY CHARACTERISTICS OF BROADBAND HIGH POWER KLYSTRON

Two methods for improving the equidriving power-frequency characteristics of broad-band high power klystrons are presented. One is that a comb-line bandpass filter with someattenuation properties is inserted between the TWT driver and the klystron for compensatingthe gain-frequency characteristics of the klystron to get the required equidriving power-frequencycharacteristics. The other is that a reactive element is connected with the input cavity to changeits resonance frequencies f0 and QL, and thus to improve the power-frequency characteristics ofthe klystron.

DESIGN OF BEAM-WAVE INTERACTION BASED ON HIGH EFFICIENCY OF A HIGH-POWER BROADBAND KLYSTRON

The paper mainly presents the design of beam-wave interaction of a C-band high-peakpower high-efficiency broadband klystron.The beam-wave interaction section is designed based on considerations of efficiency and bandwidth synthetically.As a part of beam-wave interaction section,buncher section is simulated by Particle-In-Cell(PIC) code to observe the bunching process of electron beam to achieve high conversion efficiency of electron beam and RF field.When it comes to the other part,output circuit is designed as a three-section filter by an output cavity loaded with Chebyshev filter,and the cold test results are given.The beam-wave interaction is simulated by EGUN code and Arsenal-MSU code respectively.The simulated results indicated that,the existence of power dips in the operating bandwidth is verified by Arsenal-MSU code,comparing proper results by EGUN code.Then,the method that design parameters are not adjusted except parameters of buncher cavities to remove potential power dips is described.What is more,the simulated results of electron optics system are given by EGUN code and Arsenal-MSU code respectively.The further hot test results of klystron prove that the whole design of beam-wave interaction is effective.

Low Complexity Multiuser Detection Algorithm for Multi-Beam Satellite Systems

The minimum mean square error-successive interference cancellation( MMSE-SIC) multiuser detection algorithm has high complexity and long processing latency. A multiuser detection algorithm is proposed for multi-beam satellite systems in order to decrease the complexity and latency. The spot beams are grouped base on the distance between them in the proposed algorithm. Some groups are detected in parallel after a crucial group-wise interference cancellation. Furthermore, the multi-stage structure is introduced to improve the performance. Simulation results show that the proposed algorithm can achieve better performance with less complexity compared with the existing group detection algorithm. Moreover,the proposed algorithm using one stage can reduce the complexity over the fast MMSE-SIC and existing group detection algorithm by 9% and20. 9%. The processing latency is reduced significantly compared with the MMSE-SIC.

Distortion of optical feedback signals in microchip Nd:YAG lasers subjected to external multi-beam interference feedback

This paper proposes a theoretical analysis for the characteristics of an external cavity Nd：YAG laser with feedback of multiple-beam interference, which is induced by the multi-reentrance of the light from the external Fabry-Perot cavity. The theoretical model considers the multiple beam interference of the external Fabry-Perot cavity. It is found that the optical feedback signals are distorted to pulse waveforms instead of the sinusoidal ones in conventional feedback. The experimental results are in good agreement with the theoretical analysis. The obtained theoretical and experimental results can advance the development of a laser feedback interferometer.

Multi-beam Sonar and Side-scan Sonar Image Co-registering and Fusing

Multi-beam Sonar and Side-scan Sonar compensate each other. In order to fully utilize all information, it is necessary to fuse two kinds of image and data. And the image co-registration is an important and complicated job before fusion. This paper suggests combining bathymetric data with intensity image, obtaining the characteristic points through the minimal angles of lines, and then deciding the corresponding image points by the maximal correlate coefficient in searching space. Finally, the second order polynomial is applied to the deformation model. After the images have been co-registered, Wavelet is used to fuse the images. It is shown that this algorithm can be used in the flat seafloor or the isotropic seabed. Verification is made in the paper with the observed data.

AES Encrypted FSK Generation at X-Band Frequency using a Single Reflex Klystron

This paper describes a high security data transmission system over X-band microwave frequency. The paper has two parts. The first part deals with encryption of binary data by Advanced Encryption Standard (AES) using VHDL modeling of Field Programmable Gate Array (FPGA). The second part deals with a novel idea of transmitting the encrypted data by using a single klystron. This requires the simultaneous generation of a pair of two independent RF frequencies from a reflex klystron working for X-band frequency range. In this scheme, the klystron is suitably biased on the repeller terminal and superimposed on a train of AES encrypted binary data so as to create two RF frequencies one corresponding to negative peaks and the other one to the positive peaks of the data resulting in an Frequency Shift Keying (FSK) signal. The results have been verified experimentally.