Integrating petrophysical data into efficient iterative cluster analysis for electrofacies identification in clastic reservoirs

Efficient iterative unsupervised machine learning involving probabilistic clustering analysis with the expectation-maximization(EM)clustering algorithm is applied to categorize reservoir facies by exploiting latent and observable well-log variables from a clastic reservoir in the Majnoon oilfield,southern Iraq.The observable well-log variables consist of conventional open-hole,well-log data and the computer-processed interpretation of gamma rays,bulk density,neutron porosity,compressional sonic,deep resistivity,shale volume,total porosity,and water saturation,from three wells located in the Nahr Umr reservoir.The latent variables include shale volume and water saturation.The EM algorithm efficiently characterizes electrofacies through iterative machine learning to identify the local maximum likelihood estimates(MLE)of the observable and latent variables in the studied dataset.The optimized EM model developed successfully predicts the core-derived facies classification in two of the studied wells.The EM model clusters the data into three distinctive reservoir electrofacies(F1,F2,and F3).F1 represents a gas-bearing electrofacies with low shale volume(Vsh)and water saturation(Sw)and high porosity and permeability values identifying it as an attractive reservoir target.The results of the EM model are validated using nuclear magnetic resonance(NMR)data from the third studied well for which no cores were recovered.The NMR results confirm the effectiveness and accuracy of the EM model in predicting electrofacies.The utilization of the EM algorithm for electrofacies classification/cluster analysis is innovative.Specifically,the clusters it establishes are less rigidly constrained than those derived from the more commonly used K-means clustering method.The EM methodology developed generates dependable electrofacies estimates in the studied reservoir intervals where core samples are not available.Therefore,once calibrated with core data in some wells,the model is suitable for application to other wells that lack core data.

ARHCS (Automatic Rainfall Half-Life Cluster System): A Landslides Early Warning System (LEWS) Using Cluster Analysis and Automatic Threshold Definition

A significant portion of Landslide Early Warning Systems (LEWS) relies on the definition of operational thresholds and the monitoring of cumulative rainfall for alert issuance. These thresholds can be obtained in various ways, but most often they are based on previous landslide data. This approach introduces several limitations. For instance, there is a requirement for the location to have been previously monitored in some way to have this type of information recorded. Another significant limitation is the need for information regarding the location and timing of incidents. Despite the current ease of obtaining location information (GPS, drone images, etc.), the timing of the event remains challenging to ascertain for a considerable portion of landslide data. Concerning rainfall monitoring, there are multiple ways to consider it, for instance, examining accumulations over various intervals (1 h, 6 h, 24 h, 72 h), as well as in the calculation of effective rainfall, which represents the precipitation that actually infiltrates the soil. However, in the vast majority of cases, both the thresholds and the rain monitoring approach are defined manually and subjectively, relying on the operators’ experience. This makes the process labor-intensive and time-consuming, hindering the establishment of a truly standardized and rapidly scalable methodology on a large scale. In this work, we propose a Landslides Early Warning System (LEWS) based on the concept of rainfall half-life and the determination of thresholds using Cluster Analysis and data inversion. The system is designed to be applied in extensive monitoring networks, such as the one utilized by Cemaden, Brazil’s National Center for Monitoring and Early Warning of Natural Disasters.

Comparative Analysis of Differences among Northern,Jiangnan,and Lingnan Classical Private Gardens Using Principal Component Cluster Method

This paper investigates the design essence of Chinese classical private gardens,integrating their design elements and fundamental principles.It systematically analyzes the unique characteristics and differences among classical private gardens in the Northern,Jiangnan,and Lingnan regions.The study examines nine classical private gardens from Northern China,Jiangnan,and Lingnan by utilizing the advanced tool of principal component cluster analysis.Based on literature analysis and field research,273 variables were selected for principal component analysis,from which four components with higher contribution rates were chosen for further study.Subsequently,we employed clustering analysis techniques to compare the differences among the three types of gardens.The results reveal that the first principal component effectively highlights the differences between Jiangnan and Lingnan private gardens.The second principal component serves as the key to defining the types of Northern private gardens and distinguishing them from the other two types,and the third principal component indicates that Lingnan private gardens can be categorized into two distinct types as well.

Variation and Cluster Analysis on Leaf Characters from Different Provenance Sources of Polygonum multiflorum Thunb

[Objective] The aim was to study the variation of leaf characters from different provenance sources of Polygonum multiflorum Thunb,as well as to carry out cluster analysis on P.multiflorum from different provenance sources to provide basis for the classification,identification,breeding and improved variety selection of P.multiflorum.[Method] Leaf shape characters of 31 copies of germplasm resources in the major distribution region of the whole country were determined,and the genetic variation of P.multiflorum leaves from different producing areas was analyzed.[Result] The leaf characters of single plant of the same experimental provenance source of P.multiflorum were relatively stable,the variation was mainly found on the single leaf area,1/2 leaf width,leaf width and other indicators;the variation of each leaf character among different provenance sources was obvious,and the variation was mainly found on the single leaf weight,leaf area,1/2 leaf width,leaf length and other indicators.The correlation analysis of each leaf character in P.multiflorum suggested that the single leaf area and single leaf weight showed extremely significant positive correlation with leaf length,1/2 leaf width,leaf width,leaf thickness and leaf stem length,while the single leaf area and single leaf weight showed significant negative correlation with WWR（leaf width/1/2 leaf width）and LWR（leaf length/1/2 leaf length）,in addition,several macroscopic leaf characters such as leaf length,1/2 leaf width,leaf width,leaf stem length showed extremely positive correlation.The main component analysis result suggested that the contribution rate of accumulation variance of the front three main components was up to 97.4%,which could better reflect the comprehensive performance of leaf characters of different provenance sources of P.multiflorum.The cluster analysis showed that the experimental 31 copies of P.multiflorum provenance sources should be divided into three classes,the first class was distributed in the Middle,Western of Guizhou,northwestern of Guangxi and western areas with higher altitude;the second class was distributed in Hunan,Hubei,Sichuan,Guangdong and the most area of Guangxi;the third class was distributed in Anhui,Jiangsu and Henan and Shandong.[Conclusion] Cluster analysis of leaf characters indicated that the kinds of provenance sources which the geographical position was closer could be got together.The study had provided a certain basis for the classification of P.multiflorum.

Application of cluster analysis and stepwise regression in predicting the traffic volume of lanes

Because of the difficulty to obtain the traffic flow information of lanes at non-detector intersections in most metropolises of the world,based on the relationships between the lanes of signal-controlled intersections,cluster analysis and stepwise regression are integrated to predict the traffic volume of lanes at non-detector isolated controlled intersections.First cluster analysis is used to cluster the lanes of non-detector isolated signal-controlled intersections and the lanes of all signal-controlled intersections with detectors.Then, by the results of cluster analysis,the traffic volume samples are selected randomly and stepwise regression is used to predict the traffic volume of lanes at non-detector isolated signal-controlled intersections.The method is tested by the traffic volume data of lanes of the road network of Nanjing city.The problem of predicting the traffic volume of lanes at non-detector isolated signal-controlled intersections was resolved and can be widely used in urban traffic flow guidance and urban traffic control in cities without enough intersections equipped with detectors.

Characterizing heterogeneity in vehicular traffic speed using two-step cluster analysis

In order to analyze the heterogeneity in vehicular traffic speed, a new method that integrates cluster analysis and probability distribution function fitting is presented. First, for identifying the optimal number of clusters, the two-step cluster method is applied to analyze actual speed data, which suggests that dividing speed data into two clusters can best reflect the intrinsic patterns of traffic flows. Such information is then taken as guidance in probability distribution function fitting. The normal, skew-normal and skew-t distribution functions are used to fit the probability distribution of each cluster respectively, which suggests that the skew-t distribution has the highest fitting accuracy; the second is skew-normal distribution; the worst is normal distribution. Model analysis results demonstrate that the proposed mixture model has a better fitting and generalization capability than the conventional single model. In addition, the new method is more flexible in terms of data fitting and can provide a more accurate model of speed distribution.

Cluster Analysis of Morphologic Characteristic of Eight Geographical Populations of Rana Dybowskii

[ObJective] The research aimed to determine the geographic distribution map of system of Rana dybowskii. [Method] Four morphologic indices （body length, body weight, forelimb length, hindlimb length） of eight geographical populations of R.dybowskii which naturally distribute in Changhai Mountain and Xiaoxing＇an Mountain were measured. Measure results were variance analyzed and cluster analyzed. [Result] Variance analysis showed： the genetic branching among the Dongfanghong male population（ belongs to Wandashan） and Xiaoxing＇an Mountain male population and Changbai Mountain male population were significantly different （P〈0.05） ; the genetic branching between the Hebei female population （belongs to Xiaoxing＇an Mountain） and Changbai Mountain female population was significantly different （P〈0.05 ）. Cluster analysis showed ： male R.dybowskii can be divided into three groups ： the first group included Quanyang, Tianbei, Chaoyang and Ddkouqin, the second group included Tieli and Anshan, the third group included Dongfanghong; and the female R. dybowskii can be divided into three groups ： the first group included Quanyang and Chaoyang, the second group included Tianbei and Dakouqin, the third group included Hebei. [Condusion] The paper deduced that the Sanjiang Plain was the geographical origin center ofR. dybowskii which radiated to Changbai Mountain and Xiaoxing＇an Mountain along the adverse current of Songhua River basin, therefore, the current distribution pattern of R. dybowskii was formed.

Genetic Diversity and Clustering Analysis of 48Cultivars of Olea euyopaea L.

Inter-simple sequence repeat（ISSR） molecular markers were applied to analyze the genetic diversity and clustering of 48 introduced and bred cultivars of Olea euyopaea L. Totally 106 DNA bands were amplified by 11 screened primers, including 99 polymorphic bands; the percentage of polymorphic loci was 93.40%, indicating a rich genetic diversity in Olea euyopaea L. germplasm resources. Based on Nei＇s genetic distances between various cultivars, a dendrogram of 48 cultivars of Olea euyopaea L. was constructed using unweighted pair-group（UPMGA）method,which showed that 48 cultivars were clustered into four main categories; 84.6% of native cultivars were clustered into two categories; most of introduced cultivars were clustered based on their sources and main usages but not on their geographic origins. This study will provide references for the utilization and further genetic improvement of Olea euyopaea L. germplasm resources.

Clustering analysis algorithm for security supervising data based on semantic description in coal mines

In order to mine production and security information from security supervising data and to ensure security and safety involved in production and decision-making,a clustering analysis algorithm for security supervising data based on a semantic description in coal mines is studied.First,the semantic and numerical-based hybrid description method of security supervising data in coal mines is described.Secondly,the similarity measurement method of semantic and numerical data are separately given and a weight-based hybrid similarity measurement method for the security supervising data based on a semantic description in coal mines is presented.Thirdly,taking the hybrid similarity measurement method as the distance criteria and using a grid methodology for reference,an improved CURE clustering algorithm based on the grid is presented.Finally,the simulation results of a security supervising data set in coal mines validate the efficiency of the algorithm.

Principal Component Analysis and Cluster Analysis of Fagopyrum tataricum Varieties(Lines)

In order to reveal the genetic differences and agronomic traits of Fagopy-rum tataricum_ varieties （lines） intuitively, explore good resources and avoid the blindness of parent selection during the breeding process, six primary agronomic traits of 45 F. tataricum_ varieties （lines） that came from the eleven buckwheat breeding departments across the country were analyzed with principal component analysis and cluster analysis. The results of principal component analysis showed that the six agronomic traits could be simplified into three principal components, and the cumulative contribution rate reached 83%. The results of cluster analysis showed that the 45 F. tataricum varieties （lines） were classified into four groups：high stalk, medium yield and smal grain type, medium stalk, high yield and large grain type, medium stalk, low yield and smal grain type and high stalk, medium yield and medium grain type. Among them, performance of comprehensive trait of the second type was better than that of the other types. Thus, the F. tataricum_va-rieties （lines） that were classified into the second type could be considered as good varieties （lines） or breeding materials. The genetic differences among F. tataricum_varieties （lines） had no necessary correlations with origin and geographical distance. ln addition to complementary traits and geographical distance, genetic distances （dif-ferent populations） should be taken into consideration during parent selection in cross breeding.

Clustering Analysis on Large Grained Brassica napus Materials Based on the Optimized ACGM Markers

[Objective] This study aimed to develop ACGM markers for the clustering analysis of large grained Brassica napus materials. [Method] A total of 44 pairs of ACGM primers were designed according to 18 genes related to Arabidopsis grain development and their homologous rape EST sequences. After electrophoresis, 18 pairs of ACGM primers were selected for the clustering analysis of 16 larger grained samples and four fine grained samples of rapeseed. [Result] PCR result showed that 2-6 specific bands were respectively amplified by each pair of primes, and all the bands were polymorphic and repeatable, suggesting that the optimized ACGM markers were useful for clustering analysis of B. napus species. Clustering analysis revealed that the 20 rapeseed samples were divided into three clusters A, B, and C at similarity coefficient 0.6. Then, the clusters A and B were further divided into five sub clusters A1, A2, A3, B1 and B2 at similarity coefficient 0.67. [Conclusion] This study will provide theoretical and practical values for rape breeding.

Cluster Analysis of Characteristics of Different Sweet Cherry Varieties

In order to compare the characteristics of different varieties of sweet cherry and to formulate corresponding pruning scheme, hierarchical cluster analysis was conducted for the 14 sweet cherry varieties that were mainly planted in Shanxi Province. The results showed that the 14 varieties of sweet cherry could be divided into two types, Hongmanao and Rainier. Fruit setting rate, branching rate, medium fruit shoot proportion, spur proportion and yield per plant were significantly different between these two types of sweet cherry. The key points of pruning management, to improve the yield of Rainier type, were to increase the fruit setting rate and spur proportion, and to control properly the long and medium fruit shoot proportion.

Study on FTIR Spectra of Corn Germs and Endosperms of Three Different Colors Combining with Cluster Analysis

[Objective] This research aimed to study the FTIR spectra of corn germs and endosperms so as to provide a scientific way for identifying corn of different types. [Method] The corn germs and endosperms of three types were studied by using Fourier transform infrared spectroscopy（FTIR） technology, combined with cluster analysis. [Result] The overall characteristics of original FTIR spectra were basically similar within the range of 700-1 800 cm^-1. The FTIR spectra were mainly composed by the absorption peaks of polysaccharides, proteins and lipids. Within the wavelength range of 700-1 800 cm^-1, there were only tiny differences in original FTIR spectra among the corn germs and endosperms of three different types. The spectra were then processed by using first derivative and second derivative. The second derivative spectra were used for hierarchical cluster analysis（HCA）. The results showed that with the wavelength range of 700-1 800 cm^-1, the second derivative spectra of the 52 samples could be better clustered according to the tree types and corn germ and corn endosperm. The clustering correct rate reached 96.1%.[Conclusion] FTIR technology, combined with cluster analysis, can be used to identify different types of corn germs and endosperms, and it is characterized by convenience and rapidness.

Study on Trace Elements in Rehmannia glutinosa Libosch. by Principal Component Analysis and Clustering Analysis

[Objective] This study aimed to investigate the trace elements in Rehman- nia glutinosa Libosch. by using principal component analysis and clustering analysis. [Method] Principal component analysis and clustering analysis of R. glutinosa medicinal materials from different sources were conducted with contents of six trace elements as indices. [Result] The principal component analysis could comprehen- sively evaluate the quality of R. glutinosa samples with objective results which was consistent with the results of clustering analysis. [Conclusion] Principal component analysis and clustering analysis methods can be used for the quality evaluation of Chinese medicinal materials with multiple indices.

Evolution and spatiotemporal analysis of earthquake public opinion based on social media data

As critical conduits for the dissemination of online public opinion,social media platforms offer a timely and effective means for managing emergencies during major disasters,such as earthquakes.This study focuses on the analysis of online public opinions following the Maduo M7.4 earthquake in Qinghai Province and the Yangbi M6.4 earthquake in Yunnan Province.By collecting,cleaning,and organizing post-earthquake Sina Weibo(short for Weibo)data,we employed the Latent Dirichlet Allocation(LDA)model to extract information pertinent to public opinion on these earthquakes.This analysis included a comparison of the nature and temporal evolution of online public opinions related to both events.An emotion analysis,utilizing an emotion dictionary,categorized the emotional content of post-earthquake Weibo posts,facilitating a comparative study of the characteristics and temporal trends of online public emotions following the earthquakes.The findings were visualized using Geographic Information System(GIS)techniques.The analysis revealed certain commonalities in online public opinion following both earthquakes.Notably,the peak of online engagement occurred within the first 24 hours post-earthquake,with a rapid decline observed between 24 to 48 hours thereafter.The variation in popularity of online public opinion was linked to aftershock occurrences.Adjusted for population factors,online engagement in areas surrounding the earthquake sites and in Sichuan Province was significantly high.Initially dominated by feelings of“fear”and“surprise”,the public sentiment shifted towards a more positive outlook with the onset of rescue operations.However,distinctions in the online public response to each earthquake were also noted.Following the Yangbi earthquake,Yunnan Province reported the highest number of Weibo posts nationwide;in contrast,Qinghai Province ranked third post-Maduo earthquake,attributable to its smaller population size and extensive damage to communication infrastructure.This research offers a methodological approach for the analysis of online public opinion related to earthquakes,providing insights for the enhancement of post-disaster emergency management and public mental health support.

Study Progress Analysis of Effluent Quality Prediction in Activated Sludge Process Based on CiteSpace

In this paper, CiteSpace, a bibliometrics software, was adopted to collect research papers published on the Web of Science, which are relevant to biological model and effluent quality prediction in activated sludge process in the wastewater treatment. By the way of trend map, keyword knowledge map, and co-cited knowledge map, specific visualization analysis and identification of the authors, institutions and regions were concluded. Furthermore, the topics and hotspots of water quality prediction in activated sludge process through the literature-co-citation-based cluster analysis and literature citation burst analysis were also determined, which not only reflected the historical evolution progress to a certain extent, but also provided the direction and insight of the knowledge structure of water quality prediction and activated sludge process for future research.

Statistical Analysis of Abilities to Give Consent to Health Data Processing

The recent pandemic crisis has highlighted the importance of the availability and management of health data to respond quickly and effectively to health emergencies, while respecting the fundamental rights of every individual. In this context, it is essential to find a balance between the protection of privacy and the safeguarding of public health, using tools that guarantee transparency and consent to the processing of data by the population. This work, starting from a pilot investigation conducted in the Polyclinic of Bari as part of the Horizon Europe Seeds project entitled “Multidisciplinary analysis of technological tracing models of contagion: the protection of rights in the management of health data”, has the objective of promoting greater patient awareness regarding the processing of their health data and the protection of privacy. The methodology used the PHICAT (Personal Health Information Competence Assessment Tool) as a tool and, through the administration of a questionnaire, the aim was to evaluate the patients’ ability to express their consent to the release and processing of health data. The results that emerged were analyzed in relation to the 4 domains in which the process is divided which allows evaluating the patients’ ability to express a conscious choice and, also, in relation to the socio-demographic and clinical characteristics of the patients themselves. This study can contribute to understanding patients’ ability to give their consent and improve information regarding the management of health data by increasing confidence in granting the use of their data for research and clinical management.

Composition Analysis and Identification of Ancient Glass Products Based on L1 Regularization Logistic Regression

In view of the composition analysis and identification of ancient glass products, L1 regularization, K-Means cluster analysis, elbow rule and other methods were comprehensively used to build logical regression, cluster analysis, hyper-parameter test and other models, and SPSS, Python and other tools were used to obtain the classification rules of glass products under different fluxes, sub classification under different chemical compositions, hyper-parameter K value test and rationality analysis. Research can provide theoretical support for the protection and restoration of ancient glass relics.

Development,hotspots and trend directions of groundwater numerical simulation:A bibliometric and visualization analysis

Groundwater is a vital component of the hydrological cycle and essential for the sustainable development of ecosystems.Numerical simulation methods are key tools for addressing scientific challenges in groundwater research.This study uses bibliometric visualization analysis to examine the progress and trends in groundwater numerical simulation methods.By analyzing literature indexed in the Web of Science database from January 1990 to February 2023,and employing tools such as Citespace and VOSviewer,we assessed publication volume,research institutions and their collaborations,prolific scholars,keyword clustering,and emerging trends.The findings indicate an overall upward trend in both the number of publications and citations concerning groundwater numerical simulations.Since 2010,the number of publications has tripled compared to the total before 2010,underscoring the increasing significance and potential of numerical simulation methods in groundwater science.China,in particular,has shown remarkable growth in this field over the past decade,surpassing the United States,Canada,and Germany.This progress is closely linked to strong national support and active participation from research institutions,especially the contributions from teams at Hohai University,China University of Geosciences,and the University of Science and Technology of China.Collaboration between research teams is primarily seen between China and the United States,with less noticeable cooperation among other countries,resulting in a diverse and dispersed development pattern.Keyword analysis highlights that international research hotspots include groundwater recharge,karst water,geothermal water migration,seawater intrusion,variable density flow,contaminant and solute transport,pollution remediation,and land subsidence.Looking ahead,groundwater numerical simulations are expected to play a more prominent role in areas such as climate change,surface water-groundwater interactions,the impact of groundwater nitrates on the environment and health,submarine groundwater discharge,ecological water use,groundwater management,and risk prevention.

Analysis of the Employment Situation of Non Private Enterprises in Various Regions of China

In the past 30 years, Chinese enterprises have been a hot topic of discussion and concern among the general public in terms of economic and social status, ownership structure, business mechanism, and management level. Solving the problem of employment for the people is an important prerequisite for their peaceful living and work, as well as a prerequisite and foundation for building a harmonious society. The employment situation of private enterprises has always been of great concern to the outside world, and these two major jobs have always occupied an important position in the employment field of China that cannot be ignored. With the establishment of the market economy system, individual and private enterprises have become important components of the socialist economy, making significant contributions to economic development and social progress. The rapid development of China’s economy, on the one hand, is the embodiment of the superiority of China’s socialist market economic system, and on the other hand, it is the role of the tertiary industry and private enterprises in promoting the national economy. Since the 1990s, China’s private enterprises have become a new economic growth point for local and even national countries, and are one of the important ways to arrange employment and achieve social stability. This paper studies the employment of private enterprises and individuals from the perspective of statistics, extracts relevant data from China statistical Yearbook, uses the relevant knowledge of statistics to process the data, obtains the conclusion and puts forward relevant constructive suggestions.