Design and implementation of control system for superconducting RSFQ circuit

The superconducting rapid single flux quantum(RSFQ)integrated circuit is a promising solu-tion for overcoming speed and power bottlenecks in high-performance computing systems in the post-Moore era.This paper presents an architecture designed to improve the speed and power limitations of high-performance computing systems using superconducting technology.Since superconducting microprocessors,which operate at cryogenic temperatures,require support from semiconductor cir-cuits,the proposed design utilizes the von Neumann architecture with a superconducting RSFQ mi-croprocessor,cryogenic semiconductor memory,a room temperature field programmable gate array(FPGA)controller,and a host computer for input/output.Additionally,the paper introduces two key circuit designs:a start/stop controllable superconducting clock generator and an asynchronous communication interface between the RSFQ and semiconductor chips used to implement the control system.Experimental results demonstrate that the proposed design is feasible and effective,provi-ding valuable insights for future superconducting computer systems.

Passive activity enhances residual control ability in patients with complete spinal cord injury

Patients with complete spinal cord injury retain the potential for volitional muscle activity in muscles located below the spinal injury level.However,because of prolonged inactivity,initial attempts to activate these muscles may not effectively engage any of the remaining neurons in the descending pathway.A previous study unexpectedly found that a brief clinical round of passive activity significantly increased volitional muscle activation,as measured by surface electromyography.In this study,we further explored the effect of passive activity on surface electromyographic signals during volitional control tasks among individuals with complete spinal cord injury.Eleven patients with chronic complete thoracic spinal cord injury were recruited.Surface electromyography data from eight major leg muscles were acquired and compared before and after the passive activity protocol.The results indicated that the passive activity led to an increased number of activated volitional muscles and an increased frequency of activation.Although the cumulative root mean square of surface electromyography amplitude for volitional control of movement showed a slight increase after passive activity,the difference was not statistically significant.These findings suggest that brief passive activity may enhance the ability to initiate volitional muscle activity during surface electromyography tasks and underscore the potential of passive activity for improving residual motor control among patients with motor complete spinal cord injury.

THE EQUIVALENT CIRCUIT AND CONTROL SYSTEM OF TRAVELLING WAVE TYPE ULTRASONIC MOTOR

The ultrasonic motor is a sort of new type of micromotor with special structure. By use of piezoelectric converse effect of ceramics, the electrical energy is transformed into mechanical energy. Its operating principle is quite different from that of the traditional motors. In this paper the equivalent circuits of the ring stator and even the whole motor are proposed after studying the equivalent circuit of piezoelectric vibrator. Then the paper makes detailed analyses of each part of the control system, which has been simplified by the equivalent circuit. The theory in this paper has been proved through experiments.

Nonlinear feedback control of a novel hyperchaotic system and its circuit implementation

This paper reports a new hyperchaotic system by adding an additional state variable into a three-dimensional chaotic dynamical system. Some of its basic dynamical properties, such as the hyperchaotic attractor, Lyapunov expo- nents, bifurcation diagram and the hyperchaotic attractor evolving into periodic, quasi-periodic dynamical behaviours by varying parameter k are studied. An effective nonlinear feedback control method is used to suppress hyperchaos to unstable equilibrium. Furthermore, a circuit is designed to realize this new hyperchaotic system by electronic workbench （EWB）. Numerical simulations are presented to show these results.

A novel mixed-synchronization phenomenon in coupled Chua's circuits via non-fragile linear control

Dynamical variables of coupled nonlinear oscillators can exhibit different synchronization patterns depending on the designed coupling scheme. In this paper, a non-fragile linear feedback control strategy with multiplicative controller gain uncertainties is proposed for realizing the mixed-synchronization of Chua＇s circuits connected in a drive-response configuration. In particular, in the mixed-synchronization regime, different state variables of the response system can evolve into complete synchronization, anti-synchronization and even amplitude death simultaneously with the drive variables for an appropriate choice of scaling matrix. Using Lyapunov stability theory, we derive some sufficient criteria for achieving global mixed-synchronization. It is shown that the desired non-fragile state feedback controller can be constructed by solving a set of linear matrix inequalities （LMIs）. Numerical simulations are also provided to demonstrate the effectiveness of the proposed control approach.

Effects of current waveform parameters during droplet transfer on spatter in high speed waveform controlled Short-circuiting GMAW

Aim at improving the stability of the Short-circuiting Gas Metal Arc Welding （GMAW-S） process for the enhanced speed usage, effects of current waveform parameters during short-term on the welding stability have been investigated by experimental method. The welding power source used for the research is an inverter with a special current waveform control. It is shown that the spatter decreases at first then increases with each increase of the low current period, current increase rate and the maximum current limit. The test results are provided for welding of 1 mm and 3 mm mild steel at speed of 1.2 m/min. The stable GMA W-S process under high speed welding condition has been achieved by optimizing the parameters.

Simulation realization of skip cycle mode integrated control circuit in the switching power supply with low standby loss

This paper explores and proposes a design solution of an integrated skip cycle mode （SCM） control circuit with a simple structure. The design is simulated and implemented with XD10H-1.0μm modular DIMOS 650 V process. In order to meet the requirement of a wide temperature range and high yields of products, the schematic extracted from the layout is simulated with five process corners at 27℃ and 90℃. Simulation results demonstrate that the proposed integrated circuit is immune to noise and achieves skipping cycle control when switching mode power supply （SMPS） works with low load or without load.

Fault diagnosis method for switch control circuit based on SVM-AdaBoost

In order to realize the fault diagnosis of the control circuit of all-electronic computer interlocking system(ACIS)for railway signals,taking a five-wire switch electronic control module as an research object,we propose a method of selecting the sample set of the basic classifier by roulette method and realizing fault diagnosis by using SVM-AdaBoost.The experimental results show that the proportion of basic classifier samples affects classification accuracy,which reaches the highest when the proportion is 85%.When selecting the sample set of basic classifier by roulette method,the fault diagnosis accuracy is generally higher than that of the maximum weight priority method.When the optimal proportion 85%is taken,the accuracy is highest up to 96.3%.More importantly,this way can better adapt to the critical data and improve the anti-interference ability of the algorithm,and therefore it provides a basis for fault diagnosis of ACIS.

Investigation on microprocessor based waveform control of short circuit transfer CO_2 welding

A new kind of simple and flexible CO2 welding system was developed to carry out waveform control. The system consisted of IGBT inverter, PWM circuit and microprocessor unit （ MPU） , in which the output current of constant current （CC） power supply could be changed according to transient physical state, and the variable down slope rate control could be used to ensure a stable welding process. The welding experiment results proved the effectiveness of this control approach.

APPLICATION OF CIRCUIT SIMULATION IN HARDWARE DESIGN FOR ELECTRONIC CONTROL HIGH PRESSURE COMMON-RAIL FUEL SYSTEM OF DIESEL ENGINE

By means of circuit simulation, hardware of electronic control unit （ECU） of high pressure common-rail electronic control fuel system for diesel engine is designed. According to the system requirements for hardware of ECU, signal-processing circuit of variable reluctance （VR） sensor, filter circuit for input signal, high voltage power circuit and driver and protection circuit of solenoid are simulated as emphases. Difficulties of wide scope of VR sensor output signal, efficiency of high voltage power and reliable and swift driver of solenoid are solved. The results of simulation show that the hardware meets the requirement of the fuel system. At the same time, circuit simulation can greatly increase quality of the design, alleviate design labor and shorten design time.

Using Automation Controller System and Simulation Program for Testing Closed Circuits of Mini-Sprinkler Irrigation System

The field experiments were conducted at the experimental farm of Faculty of agricultural, southern Illinois University SIUC, USA. The project makes the irrigation automated. With the use of low cost sensors and the simple circuitry makes currently project a low cost product, which can be bought even by a poor farmer. This research work is best suited for places where water is scares and has to be used in limited quantity and this proposal is a model to modernize the agriculture industries at a mass scale with optimum expenditure. In the field of agricultural engineering, use of sensor method of irrigation operation is important and it is well known that closed circuits of Mini-sprinkler irrigation system are very economical and efficient. Closed circuits are considered one of the modifications of Mini-sprinkler irrigation system, and added advantages to Mini-sprinkler irrigation system because it can relieve low operating pressures problem at the end of the lateral lines. In the conventional closed circuits of Mini-sprinkler irrigation system, the farmer has to keep watch on irrigation timetable, which is different for different crops. Using this system, one can save manpower, water to improve production and ultimately profit. The data could be summarized in following: Irrigation methods under study when using lateral length 60 mcould be ranked in the following ascending order according the values of the predicted and measured head losses CM1M-SIS CM2M-SIS.The correlation (Corr.) coefficients were used to compare the predicted and measured head losses along the lateral lines of all the closed circuits designs. Generally, the values of correlation analysis were (>0.90) were obtained with 0% field slope60 mlength (experimental conditions) for all closed circuits.The interaction between irrigation methods: at the start there are significant differences between CM2M-SIS and CM1M-SIS.

The voltage-current relationship and equivalent circuit implementation of parallel flux-controlled memristive circuits

A flux-controlled memristor characterized by smooth cubic nonlinearity is taken as an example, upon which the voltage-current relationships （VCRs） between two parallel memristive circuits - a parallel memristor and capacitor circuit （the parallel MC circuit）, and a parallel memristor and inductor circuit （the parallel ML circuit） - are investigated. The results indicate that the VCR between these two parallel memristive circuits is closely related to the circuit parameters, and the frequency and amplitude of the sinusoidal voltage stimulus. An equivalent circuit model of the memristor is built, upon which the circuit simulations and exper/mental measurements of both the parallel MC circuit and the parallel ML circuit are performed, and the results verify the theoretical analysis results.

Controllability of fractional-order Chua's circuit

The ultimate proof of our understanding of nature and engineering systems is reflected in our ability to control them.Since fractional calculus is more universal, we bring attention to the controllability of fractional order systems. First,we extend the conventional controllability theorem to the fractional domain. Strictly mathematical analysis and proof are presented. Because Chua＇s circuit is a typical representative of nonlinear circuits, we study the controllability of the fractional order Chua＇s circuit in detail using the presented theorem. Numerical simulations and theoretical analysis are both presented, which are in agreement with each other.

Current Control Strategy of Chain Circuit STATCOM

在链式静止同步补偿器（static synchronous compen-sator,STATCOM）小信号交流模型的基础上,提出简化的STATCOM电流控制闭环系统;分别对典型Ⅰ型、典型Ⅱ型控制系统的电流调节器进行参数优化及比较,分析表明,对于电流阶跃响应,系统处于线性控制状态时超调量相对百分比不变,处于限幅非线性状态时超调量绝对值不变;采用比例调节器的典型I型系统稳态精度稍差,但动态控制精度较高,适合用于链式STATCOM工程装置;在a-b-c坐标系下仿真表明,应用优化设计的典型Ⅰ型系统控制参数,链式STATCOM输出电流可以快速跟踪参考值变化,具有良好的稳定性和跟踪精度。

Phase-controlled coherent population trapping in superconducting quantum circuits

We investigate the influences of the-applied-field phases and amplitudes on the coherent population trapping behavior in superconducting quantum circuits. Based on the interactions of the microwave fields with a single A-type three-level fluxonium qubit, the coherent population trapping could be obtainable and it is very sensitive to the relative phase and amplitudes of the applied fields. When the relative phase is tuned to 0 or π, the maximal atomic coherence is present and coherent population trapping occurs. While for the choice of π/2, the atomic coherence becomes weak. Meanwhile, for the fixed relative phase π/2, the value of coherence would decrease with the increase of Rabi frequency of the external field coupled with two lower levels. The responsible physical mechanism is quantum interference induced by the control fields, which is indicated in the dressed-state representation. The microwave coherent phenomenon is present in our scheme, which will have potential applications in optical communication and nonlinear optics in solid-state devices.

A Non-Scan Testable Design of Sequential Circuits by Improving Controllability

As a method for testing a sequential circuit efficiently, a scan design is usually used. But, since this design has some drawbacks, a non-scan testable design should be discussed. The testable design can be implemented by enhancing controllability and observability. This paper discusses a non-scan testable design for a sequential circuit by only focusing the improvement of controllability. The proposed design modifies a circuit so that all the FFs can be directly controlled by primary input lines in a test mode. Experimental results show that we can get a good testability using this method.

On Impulsive Control for Synchronization and Its Application to Matsumoto-Chua-Kobayashi （MCK） Circuit

The issue of impulsive control theory for synchronization of the MCK circuit is developed. We propose an impulsive control scheme for the complete synchronization of the MCK circuit including chaotic systems. A sufficient condition for the impulsive control is derived, with an easily calculated maximum impulsive interval. The proposed impulsive control scheme is applied to the MCK circuit and the simulation result demonstrates the effectiveness of the method.

The effect of different inflation volumes of laryngeal mask airway on efficacy of closed circuit controlled ventilation in pediatric cancer patients

Objective： The laryngeal mask airway （LMA） is an established way for airway control during spontaneous ventila- tion. Its ability to deliver positive pressure ventilation without leakage especially in low flow states is still controversy. The aim of this study is to test the possibility of using LMA in pediatric closed circuit controlled ventilation, and to find out the optimum cuff volume to perform closed system ventilation. Methods： Twenty children scheduled for elective surgeries were enrolled in a crossover study. Laryngeal mask airway was used. In stage I, the cuff was inflated with the maximum volume of air as rec- ommended by the manufacturers. Adjustment of volume of air inflated into the LMA cuff to the minimum volume to obtain the effective seal was done at stage II. The leak pressure, intracuff pressure and the leak volume were measured in both stages. Results： The cuff filling volume was significantly lower compared to the maximum cuff inflation volume in stage I. Leakage values showed significantly less values in stage II of the study with smaller cuff inflation volumes. The airway leakage pressure was significantly lower in stage fl in comparison to stage I. Cuff inflation pressure in stage I showed marked elevation which dropped significantly after adjustment of cuff volume in stage I1. Conclusion： Laryngeal mask airway is an effective tool to provide closed circuit controlled ventilation in pediatrics. Inflation of the cuff by the minimum volume of air needed to reach the just sealing pressure is suggested to minimize the leakage volume.

Low Phase Noise VCO using Novel Harmonic Control Circuit Based on Quad-band Composite Right/Left-handed Transmission Line

In this paper, a novel Voltage-Controlled Oscillator （VCO） using the harmonic control circuit based on the quad-band Composite Right/Left-Handed （CRLH） Transmission Line （TL） is presented to reduce the phase noise without the reduction of the frequeacy tuning range and miniaturizing the circuit size. The phase noise has been reduced by the quad-band harmonic control circuit which has the short impedance for the second- and third- and fourth- and fifth-hannonic components. The CRLH TL with two Left-Handed （LH） （backward） and two Right-Handed （RH） （forward） pass bands are used to design the quad-band harmonic control circuit. The high- Q resonator has been used to reduce the phase noise, but it has the problem of the frequency timing range reduction. However, the frequency tuning range of the proposed VCO has not reduced because the phase noise has reduced without the high-Q resonator. The miniaturization of the circuit size is achieved by using the quad-band CRLH TL instead of the conventional RH TL, The phase noise of VCO is - 124.43～ - 122.67 dBc/Hz at 100 kHz in the tuning range of 5. 729 ～5.934 GHz.

Does the traditional Chinese medicine theory of five circuits and six qi improve treatment effectiveness?A systematic review of randomized controlled trials

Objective:To evaluate whether the traditional Chinese medicine(TCM)theory of five circuits and six qi(FCSQ)is beneficial in terms of improving clinical effectiveness.Methods:Randomized controlled trials(RCTs)evaluating the clinical value of FCSQ theory were reviewed.Multiple databases(China Network Knowledge Infrastructure,Chinese Scienti fic Journals Database,Wanfang Data,SinoMed,Cochrane Library,PubMed,and Embase)weresystematically searched from inception to June 12,2018.Two authors independently extracted the data and performed a methodological quality assessment of the RCTs.RevMan 5.3 software was used for the data analysis.The effect sizes for the primary outcome measures were expressed as relative risks or mean differences with 95%confidence intervals.Results:A total of 13 RCTs were selected,involving 12 types of diseases and 4695 patients.The methodological quality of the RCTs was generally low.Five studies compared the effectiveness of TCM treatments guided by FCSQ theory with conventional TCM therapies,and the remaining eight studies compared the effectiveness of TCM treatments guided by FCSQ theory with biomedical treatments.All of the RCTs reported that the effectiveness of the treatment intervention was better than that of the intervention in the control group.Conclusion:Because of many methodological problems in existing clinical studies,it remains impossible to definitively conclude that FCSQ theory can improve clinical effectiveness.It is difficult to unify the clinical application of FCSQ theory.The feasibility and repeatability of FCSQas an intervention should be given more attention in future clinical research.Future work should also follow international norms for clinical research implementation and reporting to provide high-quality evidence for evaluating the clinical value of FCSQ theory.