Stress triggering effect on the 2022 Honghe M_(S)5.0 earthquake with historical strong earthquakes

The 2022 Honghe M_(S)5.0 seismic event is intriguing due to its occurrence in the south of the Red River Fault,an area historically lacking seismic activities greater than M_(S)5.0.To elucidate the seismogenic mechanism and scrutinize stress-triggered interactions,we calculated co-seismic and post-seismic Coulomb stress alterations induced by nine historical seismic events(M≥6.0).The analysis reveals that these substantial seismic events provoked co-seismic stress augmentations of 1.409 bar and postseismic stress increments of 0.159 bar.Noteworthy seismic events,such as the 1833 Songming,1877Shiping,1913 Eshan,and 1970 Tonghai earthquakes,catalyzed the occurrence of the Honghe earthquake.Areas of heightened future seismic risk include the southern region of the Red River Fault and the eastern segments of the Shiping-Jianshui and Qujiang faults.Additionally,we assessed the correlation between the spatial distribution of aftershocks and the Coulomb stress shift triggered by the mainshock,taking into account the influence of calculation parameter settings.

Characteristics and triggering mechanisms of early negative Indian Ocean Dipole

Negative Indian Ocean Dipole(nIOD)can exert great impacts on global climate and can also strongly influence the climate in China.Early nIOD is a major type of nIOD,which can induce more pronounced climate anomalies in summer than La Niña-related nIOD.However,the characteristics and triggering mechanisms of early nIOD are unclear.Our results based on reanalysis datasets indicate that the early nIOD and La Niña-related nIOD are the two major types of nIOD,and the former accounts for over one third of all the nIOD events in the past six decades.These two types of nIODs are similar in their intensities,but are different in their spatial patterns and seasonal cycles.The early nIOD,which develops in spring and peaks in summer,is one season earlier than the La Niña-related nIOD.The spatial pattern of the wind anomaly associated with early nIOD exhibits a winter monsoon-like pattern,with strong westerly anomalies in the equatorial Indian Ocean and eastly anomalies in the northern Indian Ocean.Opposite to the triggering mechanism of early positve IOD,the early nIOD is induced by delayed Indian summer monsoon onset.The results of this study are helpful for improving the prediction skill of IOD and its climate impacts.

Tidal triggering of seismicity in the region of Palu, Central Sulawesi, Indonesia

This paper investigates the correlation between tidal stress and earthquakes for periods ranging from hours to months in the limited zone of the Palu region(Central Sulawesi,Indonesia).Through Schuster and binomial tests,we examined the relation between the seismicity(time density of seismic events)and tidal potential arising from the Moon and Sun,using all tidal components simultaneously and focusing on the estimation of specific terms.The results show significant correlations between the seismicity and tidal potential for S2(0.5 d)and O1(1.075 d)tidal components in the case of solely isolated earthquake events,particularly for shallow earthquakes.Meanwhile,there is a strong relationship between aftershocks and tidal components larger than the Mf period(13.661 d).Finally,the analysis of the temporal variation of the earthquake-tide relation reveals an optimal correlation for about six years before the 2018 great Palu earthquake.The correlation becomes insignificant afterwards.

A review of tidal triggering of global earthquakes

Earthquake prediction remains a challenging and difficult task for scientists all over the world.The tidal triggering of earthquakes is being proven by an increasing number of investigations,most of which have shown that earthquakes are positively correlated with tides,and thus,tides provide a potential tool for earthquake prediction,especially for imminent earthquakes.In this study,publications concerning the tidal triggering of earthquakes were compiled and analyzed with regard to global earthquakes,which were classified into three main types:tectonic,volcanic,and slow earthquakes.The results reveal a high correlation between tectonic earthquakes and tides(mainly for semidiurnal and diurnal tides;14-day tides) before and after the occurrence of significant earthquakes.For volcanic earthquakes,observations of volcanoes on the seafloor and land indicate that volcanic earthquakes in near-shore volcanic areas and mid-ocean ridges have a strong correlation with tidal forces,mostly those with semidiurnal and diurnal periods.For slow earthquakes,the periodicity of the tremor duration is highly correlated with semidiurnal and diurnal tides.In conclusion,the tidal triggering of these three types of earthquakes makes a positive contribution to earthquake preparation and understanding the triggering mechanism,and thus,the prediction of these types of earthquakes should be investigated.However,there are still several inadequacies on this topic that need to be resolved to gain a definitiveanswer regarding the tidal triggering of all earthquakes.The main inadequacies are discussed in this paper from our point of view.

Triggering,clicking,locking and crepitus of the finger:A comprehensive overview

Triggering,locking,clicking,and crepitus of the fingers are common symptoms patients present with.Even though crepitus and triggering can occur as part of the same underlying diagnosis,it is important to differentiate between them,as they usually indicate different possible diagnoses.The differential diagnoses that should be considered include trigger finger,metacarpophalangeal joint(MCPJ)arthritis,fractures or dislocations,extensor digitorum communis subluxation or dislocation,locked MCPJ,avascular necrosis of the metacarpal head,and Dupuytren’s disease.A thorough clinical examination with appropriate special investigations can permit the clinician to make the correct diagnosis.Appropriate management of a confirmed diagnosis is successful in providing symptomatic improvement.

Trigger转座子衍生蛋白1对肝癌细胞生长的影响

细胞周期失调是肿瘤重要的标志之一,生物信息学分析结果表明,Trigger转座子衍生蛋白1(TIGD1)在临床肝癌组织中高表达且与细胞周期相关,但相关机制未知。为了探究TIGD1调控肝癌细胞生长的具体机制,首先,利用shRNA质粒构建靶向敲低TIGD1的肝癌细胞系Hep3B,并分析TIGD1敲低对肝癌细胞生长的影响,结果表明细胞生长受阻;接着,通过细胞流式技术分析TIGD1敲低对肝癌细胞周期进程的影响,结果显示,TIGD1敲低的Hep3B细胞系的细胞周期进程主要阻滞于G2/M期;然后,通过免疫沉淀(IP)实验验证TIGD1可能发生相互结合的蛋白分子,结果表明,TIGD1可能与Aurora激酶相互作用蛋白1(AURKAIP1)存在相互结合,进一步的Co-IP实验证实了TIGD1和AURKAIP1之间的相互作用。已知AURKAIP1可调控Aurora激酶A(AURKA)的蛋白酶体降解途径,AURKA是一种有丝分裂调控蛋白,与细胞周期进程密切相关。文中进一步探究TIGD1对AURKA蛋白水平的影响,实验结果表明,在TIGD1敲低的情况下,AURKA在Hep3B细胞系中的蛋白水平明显下调,mRNA水平没有明显变化。综上所述,TIGD1可能通过调控AURKA在肝癌细胞中的转录后水平来影响细胞周期进程,从而影响肝癌的发生发展。

Comparison study on measurement of rail weld joint between inertial reference method and multi-point chord reference method

Purpose – Straightness measurement of rail weld joint is of essential importance to railway maintenance. Dueto the lack of efficient measurement equipment, there has been limited in-depth research on rail weld joint with a5-m wavelength range, leaving a significant knowledge gap in this field.Design/methodology/approach – In this study, the authors used the well-established inertial referencemethod (IR-method), and the state-of-the-art multi-point chord reference method (MCR-method). Two methodshave been applied in different types of rail straightness measurement trollies, respectively. These instrumentswere tested in a high-speed rail section within a certain region of China. The test results were ultimatelyvalidated through using traditional straightedge and feeler gauge methods as reference data to evaluate the railweld joint straightness within the 5-m wavelength range.Findings – The research reveals that IR-method and MCR-method produce reasonably similar measurementresults for wavelengths below 1 m. However, MCR-method outperforms IR-method in terms of accuracy forwavelengths exceeding 3 m. Furthermore, it was observed that IR-method, while operating at a slower speed,carries the risk of derailing and is incapable of detecting rail weld joints and low joints within the track.Originality/value – The research compare two methods’ measurement effects in a longer wavelength rangeand demonstrate the superiority of MCR-method.

Dynamically triggered seismicity on a tectonic scale:A review

Earthquakes triggered by dynamic disturbances have been confirmed by numerous observations and experiments.In the past several decades,earthquake triggering has attracted increasing attention of scholars in relation to exploring the mechanism of earthquake triggering,earthquake prediction,and the desire to use the mechanism of earthquake triggering to reduce,prevent,or trigger earthquakes.Natural earthquakes and large‐scale explosions are the most common sources of dynamic disturbances that trigger earthquakes.In the past several decades,some models have been developed,including static,dynamic,quasi‐static,and other models.Some reviews have been published,but explosiontriggered seismicity was not included.In recent years,some new results on earthquake triggering have emerged.Therefore,this paper presents a new review to reflect the new results and include the content of explosion‐triggered earthquakes for the reference of scholars in this area.Instead of a complete review of the relevant literature,this paper primarily focuses on the main aspects of dynamic earthquake triggering on a tectonic scale and makes some suggestions on issues that need to be resolved in this area in the future.

Potential triggering factors of acute liver failure as a first manifestation of autoimmune hepatitis-a single center experience of 52 adult patients

AIM To investigate potential triggering factors leading to acute liver failure(ALF) as the initial presentation of autoimmune hepatitis(AIH).METHODS A total of 565 patients treated at our Department between 2005 and 2017 for histologically-proven AIH were retrospectively analyzed. However, 52 patients(9.2%) fulfilled the criteria for ALF defined by the "American Association for the Study of the Liver(AASLD)". According to this definition, patients with "acute-on-chronic" or "acute-on-cirrhosis" liver failure were excluded. Following parameters with focus on potential triggering factors were evaluated: Patients' demographics, causation of liver failure, laboratory data(liver enzymes, MELD-score, autoimmune markers, virus serology), liver histology, immunosuppressive regime, and finally, outcome of our patients.RESULTS The majority of patients with ALF were female(84.6%) and mean age was 43.6 ± 14.9 years. Interestingly, none of the patients with ALF was positive for antiliver kidney microsomal antibody(LKM). We could identify potential triggering factors in 26/52(50.0%) of previously healthy patients presenting ALF as their first manifestation of AIH. These were drug-induced ALF(57.7%), virus-induced ALF(30.8%), and preceding surgery in general anesthesia(11.5%), respectively. Unfortunately, 6 out of 52 patients(11.5%) did not survive ALF and 3 patients(5.7%) underwent liver transplantation(LT). Comparing data of survivors and patients with non-recovery following treatment, MELDscore(P < 0.001), age(P < 0.05), creatinine(P < 0.01), and finally, ALT-values(P < 0.05) reached statistical significance. CONCLUSION Drugs, viral infections, and previous surgery may trigger ALF as the initial presentation of AIH. Advanced age and high MELD-score were associated with lethal outcome.

Primary Investigation into the Laser Triggering Multi-Gap Multi-Channel Gas Switch in a Single Test Module Facility

A high precision laser trigger system is built up in the single test module of Primary Test Stand （PTS） facility. A fourth harmonic, with a wavelength A of 266 nm, Q-switched Nd：YAG laser was used to trigger the 5 MV multi-gap multi-channel gas switch which was filled with high pressure SF6-N2 mixture gas. The maximum deviation and the standard deviation in the jitter time of the trigger system is 4- 0.7 ns and 0.3 ns respectively. The maximum deviation and the standard deviation in the jitter time for the multi-gap multi-channel laser triggering switch is 4- 2.4 ns and 1.5 ns respectively. The curve of switch delay-time versus laser energy is obtained, which is helpful for the choice of fitting laser energy. The successful test with two lasers indicated that the design of using twenty-four lasers to trigger twenty-four switches respectively is feasible in ＂PTS＂.

Application of observed strain steps to the study of remote earthquake stress triggering

A study of the Kunlunshan earthquake of MS = 8.1 based on observed coseismic strain steps from the borehole strain monitoring network over China has been carried out with some interesting results. Firstly, many recordings disagree with theoretic calculation using static dislocation model. Secondly, abnormally large strain steps are ob-served at quite a few stations in the tectonically active east-northern China, while in the relatively inactive east-southern China no obvious steps are recorded. It is inferred that seismic stress triggering may significantly affect remote seismic strain field. In other words, whether remote faulting be seismically triggered or not may de-termine the pattern of local seismic strain changes. Further comparison study results of March 11, 1999 Zhangbei earthquake and November 1, 1999 Datong earthquake show that the specific pattern of seismic zones has obvious influence on seismic strain changes in the region. This supports the idea that observed abnormal strain steps might be produced by coseismicly stress-triggered local faulting.

Electrical triggering of earthquakes:results of laboratory experiments at spring-block models

Recently published results of field and laboratory experiments on the seismic/acoustic response to injection of direct current （DC） pulses into the Earth crust or stressed rock samples raised a question on a possibility of electrical earthquake triggering. A physical mechanism of the considered phenomenon is not clear yet in view of the very low current density （10-7-10-s A/m^2） generated by the pulsed power systems at the epicenter depth （5-10 km） of local earthquakes occurred just after the current injection. The paper describes results of laboratory ＂earthquake＂ triggering by DC pulses under conditions of a spring-block model simulated the seismogenic fault. It is experimentally shown that the electric triggering of the laboratory ＂earthquake＂ （sharp slip of a movable block of the spring-block system） is possible only within a range of subcritical state of the system, when the shear stress between the movable and fixed blocks obtains 0.98-0.99 of its critical value. The threshold of electric triggering action is about 20 A/m^2 that is 7-8 orders of magnitude higher than estimated electric current density for Bishkek test site （Northern Tien Shan, Kirghizia） where the seismic response to the man-made electric action was observed. In this connection, the electric triggering phenomena may be explained by contraction of electric current in the narrow conductive areas of the faults and the corresponding increase in current density or by involving the secondary triggering mechanisms like electromagnetic stimulation of conductive fluid migration into the fault area resulted in decrease in the fault strength properties.

Stress triggering of the Lushan M7. 0 earthquake by the Wenchuan Ms8. 0 earthquake

The Wenchuan Ms8.0 earthquake and the Lushan M7.0 earthquake occurred in the north and south segments of the Longmenshan nappe tectonic belt, respectively. Based on the focal mechanism and finite fault model of the Wenchuan Ms8.0 earthquake, we calculated the coulomb failure stress change. The inverted coulomb stress changes based on the Nishimura and Chenji models both show that the Lushan MT. 0 earth- quake occurred in the increased area of coulomb failure stress induced by the Wenchuan Ms8. 0 earthquake. The coulomb failure stress increased by approximately 0. 135 - 0. 152 bar in the source of the Lushan M7.0 earthquake, which is far more than the stress triggering threshold. Therefore, the Lushan M7.0 earthquake was most likely triggered by the coulomb failure stress change.

Group Strong Earthquakes and Triggering by Tidal Stress

The results obtained using the group model of earthquakes generated in tectonic blocks are further used in this paper to analyze the relationship between the M S≥7.0 events in Chinese mainland and the modulation and triggering from the earth tides. The research shows that the M S 7.0 events in Chinese mainland have been significantly triggered by the tidal stress, especially within the active period with group strong earthquakes. In the quiescence period of strong earthquakes, no M S7.0 events were triggered, while within the active period, over 82.4% of strong earthquakes took place within a special moon phase, which is 36.4% higher than the average. Therefore, the modulation and triggering of tidal stress can be used to distinguish the active periods and to forecast the time of the strong earthquakes within the active period. The relationship between the tidal triggering and the tectonic dynamic condition is investigated and the mechanism of the modulation is simulated with the group model of earthquakes generated in tectonic blocks.

Global test of seismic static stress triggering model

Seismic static stress triggering model is tested using Harvard centroid moment tensor (CMT) solution catalogue of 1976~2000 and concept of earthquake doublet. Result shows that seismic static stress triggering effect does exist in the view of global earthquakes, but the effect is very weak. Dividing the earthquakes into thrust focal mechanism, normal focal mechanism, strike-slip focal mechanism, we find that non-strike-slip focal mechanism earthquakes have significant triggering effect, whereas, the triggering effect in strike-slip focal mechanism earthquakes is not obvious. Divided the subsequent events delay time of earthquake doublet into 5 classes of t1, t<1, t10, t<10, 1t10 (t is in unit of d), then seismic static stress triggering effect does not change with delay time in short time period after earthquakes. The research on seismic static stress triggering in different regions of the world indicates that triggering effect is significant in subduction belts. Seismic static stress triggering model is tested by using earthquake doublets in China and its adjacent region. The result indicates that seismic static stress triggering effect cannot be observed easily in China and its adjacent region due to the seismic focal mechanism type (most of the earthquakes are strike-slip earthquakes).

Relationships between genetic polymorphisms of triggering receptor expressed on myeloid cells-1 and septic shock in a Chinese Han population

BACKGROUND: Triggering receptor expressed on myeloid cells-1(TREM-1) is a cell surface receptor expressed on neutrophils and monocytes. TREM-1 acts to amplify infl ammation and serves as a critical mediator of infl ammatory response in the context of sepsis. To date, the predisposition of TREM-1 gene polymorphisms to septic shock has not been reported. This study was designed to investigate whether TREM-1 genomic variations are associated with the development of septic shock.METHODS: We genotyped two TREM-1 single nucleotide polymorphisms(SNPs, rs2234237 and rs2234246) and evaluated the relationships between these SNPs and septic shock on susceptibility and prognosis.RESULTS: TREM-1 rs2234246 A allele in the promoter region was signifi cantly associated with the susceptibility of septic shock in recessive model(AA, OR=3.10, 95%CI 1.15 to 8.32, P=0.02), and in codominant model(AG, OR=0.72, 95%CI 0.43–1.19, P=0.02; AA, OR=2.71, 95%CI 1.00–7.42; P=0.03). However, in three inherited models(dominant model, recessive model, and codominant model), none of the assayed loci was signif icantly associated with the prognosis of septic shock. The nonsurvivor group demonstrated higher plasma IL-6 levels(99.7±34.7 pg/mL vs. 61.2±26.5 pg/mL, P<0.01) than the survivor group. Plasma concentrations of IL-6 among the three genotypes of rs2234246 were AA 99.4±48.9 pg/m L, AG 85.4±43 pg/m L, and GG 65.3±30.7 pg/m L(P<0.01). The plasma concentrations of IL-6 in patients with AA genotypes were signifi cantly higher than those in patients with GG genotypes(P<0.01).CONCLUSION: TREM-1 genetic polymorphisms rs2234246 may be significantly correlated only with susceptibility to septic shock in the Chinese Han population.

Photoconductive semiconductor switch-based triggering with 1 ns jitter for trigatron

Synchronization for multiple-pulse at nanosecond range shows a great value on the power multiplication and synchronous electric fieldsapplications. Nanosecond or sub-ns jitter synchronization is essential for the improved working efficiency of the large amounts of pulse modulesand accurate requirements for the power coherent combining applications. This paper presents a trigger generator based on a laser diodetriggered GaAs photoconductive semiconductor switch (PCSS) with low jitter and compact size characteristics. It avoids the high currentsthat are harmful to high-gain mode PCSSs. In the trigger circuit, a 200 pF capacitor is charged by a microsecond-scale 18 kV pulse and thendischarged via the high-gain mode GaAs PCSS to trigger the high-power trigatron switch. When triggered by the ~10 ns pulse generated by thePCSS, the DC-charged trigatron can operate in the 20e35 kV range with 10 ns rise time and 1 ns delay-time jitter.

Experimental Study on Triggering Characteristics of a Surface Flashover Triggered Vacuum Switch

Triggering characteristics of triggered vacuum switch （TVS）, including the discharge delay time, delay jitter, range of operational voltage and peak of pulsed current, are investigated. Both structure and experimental circuit of TVS are presented. The results indicate that TVS, as a surface flashover triggering device with high dielectric permittivity material, is with excellent triggering characteristics. When the hold-off voltage reaches 120 kV, the minimum operational voltage is 1.3 kV, and the minimum discharge delay time and jitter are 100 ns and ±10 ns, respectively. The peak current is up to 240 kA when the operational voltage reaches 100 kV. TVS can well satisfy the main demands of high voltage and current applications, and can also be used under a multi-crowbar circuit.

Suitable triggering algorithms for detecting strong ground motions using MEMS accelerometers

With the recent development of digital Micro Electro Mechanical System （MEMS） sensors, the cost of monitoring and detecting seismic events in real time can be greatly reduced. Ability of MEMS accelerograph to record a seismic event depends upon the efficiency of triggering algorithm, apart from the sensor＇s sensitivity. There are several classic triggering algorithms developed to detect seismic events, ranging from basic amplitude threshold to more sophisticated pattern recognition. Algorithms based on STA/LTA are reported to be computationally efficient for real time monitoring. In this paper, we analyzed several STA/LTA algorithms to check their efficiency and suitability using data obtained from the Quake Catcher Network （network of MEMS accelerometer stations）. We found that most of the STA/LTA algorithms are suitable for use with MEMS accelerometer data to accurately detect seismic events. However, the efficiency of any particular algorithm is found to be dependent on the parameter set used （i.e., window width of STA, LTA and threshold level）.

Triggering mechanism and dynamic process of water-rock flow in Nanfen waste dump in 2010

Water-rock flow is a kind of debris flow with more coarse particles and low viscosity, which occurs in many areas of the world. In this work, the water-rock flow that occurred on May 24, 2010, at Nanfen’s open-pit mine of China was investigated by combining field investigation, meteorological and hydrological survey with numerical simulation to understand its triggering mechanism and dynamic process. The field data shows that the short-term high-intensity rainfall is the most direct inducement to trigger water-rock flow in the waste dump. The loose shallow gravel soil and the V-shaped valley with a certain slope provide the necessary conditions of the occurrence of water-rock flow in the waste dump. Moreover, the possibility criterion of water-rock flow is presented by analyzing the historical rainfall data. In addition, the smoothed particle hydrodynamics(SPH) method was employed to simulate the waterrock flow under the conditions of Newtonian fluid with uniform distribution of water and coarse-grained materials. The simulating results show that the flow distance, velocity, shape, and deposition profile of water-rock flow are in good agreement with the field observation. The present work is beneficial to the risk assessment and mitigation design of water-rock flow disaster in the waste dump.