Due to the limited uplink capability in heterogeneousnetworks (HetNets), the decoupled uplinkand downlink access (DUDA) mode has recently beenproposed to improve the uplink performance. In thispaper, the random discon...Due to the limited uplink capability in heterogeneousnetworks (HetNets), the decoupled uplinkand downlink access (DUDA) mode has recently beenproposed to improve the uplink performance. In thispaper, the random discontinuous transmission (DTX)at user equipment (UE) is adopted to reduce the interferencecorrelation across different time slots. By utilizingstochastic geometry, we analytically derive themean local delay and energy efficiency (EE) of an uplinkHetNet with UE random DTX scheme under theDUDA mode. These expressions are further approximatedas closed forms under reasonable assumptions.Our results reveal that under the DUDA mode, there isan optimal EE with respect to mute probability underthe finite local delay constraint. In addition, with thesame finite mean local delay as under the coupled uplinkand downlink access (CUDA) mode, the HetNetsunder the DUDA mode can achieve a higher EE witha lower mute probability.展开更多
The Internet of things(IoT) as an important application of future communication networks puts a high premium on delay issues. Thus when Io T applications meet heterogeneous networks(HetNets) where macro cells are over...The Internet of things(IoT) as an important application of future communication networks puts a high premium on delay issues. Thus when Io T applications meet heterogeneous networks(HetNets) where macro cells are overlaid with small cells, some traditional problems need rethinking. In this paper, we investigate the delay-addressed association problem in two-tier Het Nets considering different backhaul technologies. Specifically, millimeter wave and fiber links are used to provide high-capacity backhaul for small cells. We first formulate the user association problem to minimize the total delay which depends on the probability of successful transmission, the number of user terminals(UTs), and the number of base stations(BSs). And then two algorithms for active mode and mixed mode are proposed to minimize the network delay. Simulation results show that algorithms based on mutual selection between UTs and BSs have better performance than those based on distance. And algorithms for mixed modes have less delay than those for active mode when the number of BSs is large enough, compared to the number of UTs.展开更多
Heterogeneous Networks(HetNets)and cell densification represent promising solutions for the surging data traffic demand in wireless networks.In dense HetNets,user traffic is steered toward the Low-Power Node(LPN)when ...Heterogeneous Networks(HetNets)and cell densification represent promising solutions for the surging data traffic demand in wireless networks.In dense HetNets,user traffic is steered toward the Low-Power Node(LPN)when possible to enhance the user throughput and system capacity by increasing the area spectral efficiency.However,because of the transmit power differences in different tiers of HetNets and irregular service demand,a load imbalance typically exists among different serving nodes.To offload more traffic to LPNs and coordinate the Inter-Cell Interference(ICI),Third-Generation Partnership Project(3GPP)has facilitated the development of the Cell Range Expansion(CRE),enhanced Inter-Cell Interference Coordination(eICIC)and Further enhanced ICIC(FeICIC).In this paper,we develop a cell clustering-based load-aware offsetting and an adaptive Low-Power Subframe(LPS)approach.Our solution allows the separation of User Association(UA)functions at the User Equipment(UE)and network server such that users can make a simple cell-selection decision similar to that in the maximum Received Signal Strength(max-RSS)based UA scheme,where the network server computes the load-aware offsetting and required LPS periods based on the load conditions of the system.The proposed solution is evaluated using system-level simulations wherein the results correspond to performance changes in different service regions.Results show that our method effectively solves the offloading and interference coordination problems in dense HetNets.展开更多
Due to the unprecedented rate of transformation in thefield of wireless communication industry,there is a need to prioritise the coverage,network power and throughput as preconditions.In Heterogeneous Networks(HetNets...Due to the unprecedented rate of transformation in thefield of wireless communication industry,there is a need to prioritise the coverage,network power and throughput as preconditions.In Heterogeneous Networks(HetNets)the low power node inclusion like Femto and Pico cells creates a network of Multi-Tier(M-Tier)which is regarded as the most significant strategy for enhancing the coverage,throughput,4G Long Term Evolution(LTE)ability.This work mainly focuses on M-Tier 3D Heterogeneous Networks Energy Efficiency(EE)based Carrier Aggregation(CA)scheme for streaming real-time huge data like images.Atfirst,M-Tier 3D HetNets scheme was made for investigating Signal to Noise Interference Ratio(SNIR)on assessing the collective Pico-tier and Femto-tier interference.Next,the scheme of channel allocation is scrutinised so as to esti-mate throughput from the multiple tiers.Additionally,with the use of CA technique,the problem of energy efficiency for M-Tier 3D Heterogeneous Network(HetNet)in relation to energy metrics and throughput was evaluated with the use of LTE and Wireless Fidelity(Wi-Fi)coexistence.The simulation is carried out in a MATLAB setting,and the outcomes reveal a huge impact on EE.The simulation is carried in terms of EE,transmission time,throughput,packet success rate,convergence probability,and coverage region.The analysis from simu-lation shows that on improving the output of the device,interference among small cell base stations is reduced on increasing EE.The outcomes attained aid in the effective creation of M-Tier 3D HetNets for enhancing EE by employing Multi-Stream Carrier Aggregation(MSCA)in HetNets.展开更多
LTE heterogeneous networks (HetNets) is becoming a popular topic since it was first developed in 3GPP Release 10. HetNets has the advantage to assemble various cell networks and enhance users’ Quality of Service (QoS...LTE heterogeneous networks (HetNets) is becoming a popular topic since it was first developed in 3GPP Release 10. HetNets has the advantage to assemble various cell networks and enhance users’ Quality of Service (QoS) within the system. However, its development is still constrained by two main issues: 1) Load imbalance caused by different transmission powers for various tiers, and 2) The unbalanced transmission power may also increase unnecessary handover rate. In order to solve the first issue, Cell range expansion (CRE) can be applied in the system, which will benefit lower-tier cell during user association phase;CRE, Hysteresis Margin (HM) and Time-to-Trigger (TTT) will be utilized to bound UE within lower tier network of HetNets and therefore solve the second issue. On the other hand, the relationship of these parameters may be complicated and even reduce QoS if they are chosen incorrectly. This paper will evaluate the advantage and disadvantage of all three parameters and propose a Markov Chain Process (MCP) based method to find optimal HM, CRE and TTT values. And then, the simulation is taken and the optimal combination for our scenario is obtained to be 1 dB, 6 dB and 60 ms respectively. First contribution of this paper is to map the HetNets handover process into MCP and all the phases of handover can be calculated and analysed in probability way, so that further prediction and simulation can be realised. Second contribution is to establish a mathematical method to model the relationship of HM, CRE and TTT in HetNets, therefore the coordination of these three important parameters is achieved to obtain system optimization.展开更多
Dual connectivity(DC)is regarded as a promising technology to increase users’throughput,provide radio link robustness,and improve load-balancing among base stations(BSs).However,since the introduction of DC makes the...Dual connectivity(DC)is regarded as a promising technology to increase users’throughput,provide radio link robustness,and improve load-balancing among base stations(BSs).However,since the introduction of DC makes the mobility of network more complex and diversified,especially the mobility management of heterogeneous networks(HetNets)based on DC faces great challenges.Taking event-A3-based measurement report as the trigger condition for handover(HO),this paper compares and evaluates the influences of HO of master nodes(MNs)and secondary nodes(SNs)on link reliability in different bearing modes.Particularly,hybrid automatic repeat request(HARQ),throughput,channel quality indicators(CQIs),and data packets queuing time are taken as link reliability analysis indicators.Besides,we study how DC utilizes the traffic split ratio between MNs and SNs to maximize the superiority of throughput.Simulation results show that DC can effectively reduce the impact of HO on the number of HARQ and increase the throughput of users.When the data traffic is tilted to the secondary nodes,the superiority of throughput is more obvious.展开更多
基金supported in part by the National Key R&D Program of China under Grant 2021YFB 2900304the Shenzhen Science and Technology Program under Grants KQTD20190929172545139 and ZDSYS20210623091808025.
文摘Due to the limited uplink capability in heterogeneousnetworks (HetNets), the decoupled uplinkand downlink access (DUDA) mode has recently beenproposed to improve the uplink performance. In thispaper, the random discontinuous transmission (DTX)at user equipment (UE) is adopted to reduce the interferencecorrelation across different time slots. By utilizingstochastic geometry, we analytically derive themean local delay and energy efficiency (EE) of an uplinkHetNet with UE random DTX scheme under theDUDA mode. These expressions are further approximatedas closed forms under reasonable assumptions.Our results reveal that under the DUDA mode, there isan optimal EE with respect to mute probability underthe finite local delay constraint. In addition, with thesame finite mean local delay as under the coupled uplinkand downlink access (CUDA) mode, the HetNetsunder the DUDA mode can achieve a higher EE witha lower mute probability.
基金supported by the National Natural Science Foundation of China (NSFC) under Grants 61427801 and 61671251the Natural Science Foundation Program through Jiangsu Province of China under Grant BK20150852+3 种基金the open research fund of National Mobile Communications Research Laboratory, Southeast University under Grant 2017D05China Postdoctoral Science Foundation under Grant 2016M590481Jiangsu Planned Projects for Postdoctoral Research Funds under Grant 1501018Asupported by NSFC under Grants 61531011 and 61625106
文摘The Internet of things(IoT) as an important application of future communication networks puts a high premium on delay issues. Thus when Io T applications meet heterogeneous networks(HetNets) where macro cells are overlaid with small cells, some traditional problems need rethinking. In this paper, we investigate the delay-addressed association problem in two-tier Het Nets considering different backhaul technologies. Specifically, millimeter wave and fiber links are used to provide high-capacity backhaul for small cells. We first formulate the user association problem to minimize the total delay which depends on the probability of successful transmission, the number of user terminals(UTs), and the number of base stations(BSs). And then two algorithms for active mode and mixed mode are proposed to minimize the network delay. Simulation results show that algorithms based on mutual selection between UTs and BSs have better performance than those based on distance. And algorithms for mixed modes have less delay than those for active mode when the number of BSs is large enough, compared to the number of UTs.
文摘Heterogeneous Networks(HetNets)and cell densification represent promising solutions for the surging data traffic demand in wireless networks.In dense HetNets,user traffic is steered toward the Low-Power Node(LPN)when possible to enhance the user throughput and system capacity by increasing the area spectral efficiency.However,because of the transmit power differences in different tiers of HetNets and irregular service demand,a load imbalance typically exists among different serving nodes.To offload more traffic to LPNs and coordinate the Inter-Cell Interference(ICI),Third-Generation Partnership Project(3GPP)has facilitated the development of the Cell Range Expansion(CRE),enhanced Inter-Cell Interference Coordination(eICIC)and Further enhanced ICIC(FeICIC).In this paper,we develop a cell clustering-based load-aware offsetting and an adaptive Low-Power Subframe(LPS)approach.Our solution allows the separation of User Association(UA)functions at the User Equipment(UE)and network server such that users can make a simple cell-selection decision similar to that in the maximum Received Signal Strength(max-RSS)based UA scheme,where the network server computes the load-aware offsetting and required LPS periods based on the load conditions of the system.The proposed solution is evaluated using system-level simulations wherein the results correspond to performance changes in different service regions.Results show that our method effectively solves the offloading and interference coordination problems in dense HetNets.
文摘Due to the unprecedented rate of transformation in thefield of wireless communication industry,there is a need to prioritise the coverage,network power and throughput as preconditions.In Heterogeneous Networks(HetNets)the low power node inclusion like Femto and Pico cells creates a network of Multi-Tier(M-Tier)which is regarded as the most significant strategy for enhancing the coverage,throughput,4G Long Term Evolution(LTE)ability.This work mainly focuses on M-Tier 3D Heterogeneous Networks Energy Efficiency(EE)based Carrier Aggregation(CA)scheme for streaming real-time huge data like images.Atfirst,M-Tier 3D HetNets scheme was made for investigating Signal to Noise Interference Ratio(SNIR)on assessing the collective Pico-tier and Femto-tier interference.Next,the scheme of channel allocation is scrutinised so as to esti-mate throughput from the multiple tiers.Additionally,with the use of CA technique,the problem of energy efficiency for M-Tier 3D Heterogeneous Network(HetNet)in relation to energy metrics and throughput was evaluated with the use of LTE and Wireless Fidelity(Wi-Fi)coexistence.The simulation is carried out in a MATLAB setting,and the outcomes reveal a huge impact on EE.The simulation is carried in terms of EE,transmission time,throughput,packet success rate,convergence probability,and coverage region.The analysis from simu-lation shows that on improving the output of the device,interference among small cell base stations is reduced on increasing EE.The outcomes attained aid in the effective creation of M-Tier 3D HetNets for enhancing EE by employing Multi-Stream Carrier Aggregation(MSCA)in HetNets.
文摘LTE heterogeneous networks (HetNets) is becoming a popular topic since it was first developed in 3GPP Release 10. HetNets has the advantage to assemble various cell networks and enhance users’ Quality of Service (QoS) within the system. However, its development is still constrained by two main issues: 1) Load imbalance caused by different transmission powers for various tiers, and 2) The unbalanced transmission power may also increase unnecessary handover rate. In order to solve the first issue, Cell range expansion (CRE) can be applied in the system, which will benefit lower-tier cell during user association phase;CRE, Hysteresis Margin (HM) and Time-to-Trigger (TTT) will be utilized to bound UE within lower tier network of HetNets and therefore solve the second issue. On the other hand, the relationship of these parameters may be complicated and even reduce QoS if they are chosen incorrectly. This paper will evaluate the advantage and disadvantage of all three parameters and propose a Markov Chain Process (MCP) based method to find optimal HM, CRE and TTT values. And then, the simulation is taken and the optimal combination for our scenario is obtained to be 1 dB, 6 dB and 60 ms respectively. First contribution of this paper is to map the HetNets handover process into MCP and all the phases of handover can be calculated and analysed in probability way, so that further prediction and simulation can be realised. Second contribution is to establish a mathematical method to model the relationship of HM, CRE and TTT in HetNets, therefore the coordination of these three important parameters is achieved to obtain system optimization.
基金The National Science and Technology Major Project(2016ZX03001011-005)the National Natural Science Foundation of China(No.61571123,61521061)+1 种基金the Research Fund of National Mobile Communications Research Laboratory of Southeast University(No.2017A03)Qing Lan Project
基金supported by the National Natural Science Foundation of China(Nos.62161035 and 61861034)Inner Mongolia Natural Science Foundation(No.2022MS06022)。
文摘Dual connectivity(DC)is regarded as a promising technology to increase users’throughput,provide radio link robustness,and improve load-balancing among base stations(BSs).However,since the introduction of DC makes the mobility of network more complex and diversified,especially the mobility management of heterogeneous networks(HetNets)based on DC faces great challenges.Taking event-A3-based measurement report as the trigger condition for handover(HO),this paper compares and evaluates the influences of HO of master nodes(MNs)and secondary nodes(SNs)on link reliability in different bearing modes.Particularly,hybrid automatic repeat request(HARQ),throughput,channel quality indicators(CQIs),and data packets queuing time are taken as link reliability analysis indicators.Besides,we study how DC utilizes the traffic split ratio between MNs and SNs to maximize the superiority of throughput.Simulation results show that DC can effectively reduce the impact of HO on the number of HARQ and increase the throughput of users.When the data traffic is tilted to the secondary nodes,the superiority of throughput is more obvious.