Effect of bias voltage on compositional, mechanical and corrosion property of ZrNbAlN multilayer films by unbalanced magnetron sputtering

Nano-scaled ZrNbAlN films with different negative bias voltages（Vb） were deposited on bronze substrate and Si（100） wafers by a reactive unbalanced magnetron sputtering technique. Composition and structure properties were characterized by X-ray photoelectron spectroscopy and X-ray diffraction. It is found that mole concentrations of Zr and Nb are affected by Vb, which leads to the increase of binding energy of N 1s and Al 2p and decrease of binding energy of Zr 3d5/2 and Nb 3d5/2. Surface morphologies evolution controlled by Vb could be observed. Furthermore, X-ray diffraction patterns reveal that these films show a（111） preferred orientation. Moreover, mechanical property and corrosion behavior of ZrNbAlN films were characterized by nanoindentation test and corrosion test, respectively. A maximum value of 21.85 GPa at-70 V occurs in the ZrNbAlN- bronze system, which outperforms uncoated bronze. Corrosion experiments in 0.5 mol/L NaCl and 0.5 mol/L HCl solution show that corrosion potential and corrosion current are dependent on Vb, and better anti-corrosion property could be obtained at-90 V.

Fretting wear behavior of Ti/TiN multilayer film on uranium surface under various displacement amplitudes

Ti/TiN multilayer film was deposited on uranium surface by arc ion plating technique to improve fretting wear behavior. The morphology, structure and element distribution of the film were measured by scanning electric microscopy（SEM）, X-ray diffractometry（XRD） and Auger electron spectroscopy（AES）. Fretting wear tests of uranium and Ti/TiN multilayer film were carried out using pin-on-disc configuration. The fretting tests of uranium and Ti/TiN multilayer film were carried out under normal load of 20 N and various displacement amplitudes ranging from 5 to 100 μm. With the increase of the displacement amplitude, the fretting changed from partial slip regime（PSR） to slip regime（SR）. The coefficient of friction（COF） increased with the increase of displacement amplitude. The results indicated that the displacement amplitude had a strong effect on fretting wear behavior of the film. The damage of the film was very slight when the displacement amplitude was below 20 μm. The observations indicated that the delamination was the main wear mechanism of Ti/TiN multilayer film in PSR. The main wear mechanism of Ti/TiN multilayer film in SR was delamination and abrasive wear.

PREPARATION OF Fe/Ni MULTILAYER FILMS AND THEIR MAGNETIC PROPERTIES

FeNi multilayer films were prepared by EB-PVD technique. A modified TG-DSC apparatus was used to measure their Curie temperatures, which were around 7600C, lower than that of pure Fe thin films. The easy magnetization axis was in-plane. High temperature annealing in vacuum decreased the coercivity sharply. The saturation magnetization also changed with heat treatment. After annealing at the temperature equal to the substrate temperature during deposition, the saturation magnetization decreased.

Analysis of the spatial filter of a dielectric multilayer film reflective cutoff filter-combination device

The experiment setup of a reflecting combination device, which has more advantages than a transmitting combination device, is designed in this study. To achieve angular spectrum selectivity, only one type of reflective component is needed,so difficulties of design and preparation are reduced. A dielectric multilayer film is applied to the reflective component, and the long wave-pass coating stacks of the structure are designed. To achieve high stopband transmittance and reduce electric field intensity at a wavelength of 1053 nm, an objective function is proposed for designing an optimized coating. The final optimized coating has good spectral characteristics and a high laser-induced damage threshold. A dielectric multilayer film with high reflectance plays an important role in preparing and applying a dielectric multilayer film reflecting cutoff filter-combination device.

Effect of Annealing Temperature on GMR of [NiFeCo(10 nm)/Ag(10 nm)]×20 Multilayer Film

The composition, phase structure, and microstructure of the discontinuous multilayer films [NiFeCo(10 nm)/ Ag(10 nm)]×20 annealed at temperature 280, 320, 360 and 400℃, respectively were investigated. GMR (giant magnetore-sistance) ratios of the multilayer films were measured at different temperatures. The results showed that FeNi3 precipitated at 360℃ and dissolved at 400℃. The films annealed at 360℃ for 1 h exhibited the highest GMR ratio 11% when saturation field was equal to 79.6 kA/m.

Structure and tribological properties of Si/a-C:H(Ag)multilayer film in stimulated body fluid

Si/a-C:H(Ag)multilayer films with different modulation periods are prepared to test their potential applications in human body.The composition,microstructure,mechanical and tribological properties in the simulated body fluid are investigated.The results show the concentration of Ag first decreases and then increases with the modulation period decreasing from 984 nm to 250 nm.Whereas the C content has an opposite variation trend.Notably,the concentration of Ag plays a more important role than the modulation period in the properties of the multilayer film.The a-C:H sublayer of the film with an appropriate Ag concentration(8.97 at.%)(modulation period of 512 nm)maintains the highest sp3/sp2 ratio,surface roughness and hardness,and excellent tribological property in the stimulated body fluid.An appropriate number of Ag atoms and size of Ag atom allow the Ag atoms to easily enter into the contact interface for load bearing and lubricating.This work proves that the Ag nanoparticles in the a-C:H sublayer plays a more important role in the tribological properties of the composite-multilayer film in stimulated body fluid condition.

Syntheses and Tribological Property of CrMoN/MoS2 Multilayer Films on Piston Rings of Heavy Vehicle Engine

In order to prolong the service life of piston rings of heavy vehicle engine and decrease the friction and wear of piston rings and cylinder liner,CrMoN/MoS_2 multilayer films were deposited on the surface of rings by magnetron sputtering and low temperature ion sulfuration.FESEM equipped with EDX was adopted to analyze the compositions and morphologies of surface,cross-section,and wear scars of the multilayer films.The nano-hardness and Young＇s modulus of the films were measured by a nano tester.Tribologicalproperties of the films were tested by an SRV~174;4 wear tester.The experimentalresults indicate that the structures of the multilayer films are dense and compact.The films possess nano hardness value of approximately 26.7 GPa and superior ability of plastic deformation resistance.The multilayer films can activate solid lubricating,and possess an excellent antifriction and wear resistance under the conditions of heavy load,high frequency,high temperature,and dynamic load.

Remanence Enhancement Effect in Ni_(0.7)Zn_(0.3)Fe_2O_4/Co_(0.8)Fe_(2.2)O_4 Ferrite Multilayer Film

Ni0.7Zn0.3Fe2O4/Co0.8Fe2.2O4（NZFO/CFO） multilayer films are fabricated on Si（lO0） substrates by the chemical solution deposition method. The mierostructure and magnetic properties are systematically investigated. The results of field-emission scanning electronic microscopy show that the grain size of the NZFO/CFO multilayer film is quite uniform and the thickness is about 30Ohm. The remanence enhancement effect of the NZFO/CFO multilayer film can be mainly attributed to the exchange coupling interaction between NZFO and CFO ferrite films, which is in favor of the design and fabrication of modern electronic devices.

Light-Emitting Diodes Based on All-Quantum-Dot Multilayer Films and the Influence of Various Hole-Transporting Layers on the Performance

We present a systematic analysis of the exciton-recombination zone within all-quantum-dot （QD） multilayer films using sensing QD layers in QD-based light-emitting diodes （QLEDs）, and demonstrate the a11-QD multilayer films with different sequences of layers prepared by inserting a sensing blue QD layer denoted as B at various positions within four red QD multilayers denoted as R. We also use different hole transporting layers （PVK, CBP as well as poly-TPD） to prevent the formation of leakage current and to improve the luminance. The results show that the total EL emission is mostly at the fourth （60%） and fifth （40%） QD monolayers, adjacent to ITO. This presents both decreasing current density and increasing brightness with different hole transporting layers, thus resulting in more efficient performance.

Cellular response to titanium discs coated with polyelectrolyte multilayer films

The purpose of this study was to investigate the effects ofpolyelectrolyte multilayer （PEM） coatings on the biological behavior of titanium （Ti） substrates. Collagen type I/hyaluronic acid （Col/HA） and chitosan/hyaluronic acid （Chi/HA） multilayer PEM coatings were introduced onto Ti substrates using layer-by-layer assembly. Contact angle instruments and quartz crystal microbalance were used for film characterization. The results obtained showed that both Col/HA and Chi/HA surfaces had high hydrophilicity and promoted cell adhesion in MC3T3-E1 pre-osteoblast and human gingival fibroblast cells. In addition, the synthesis of function-related proteins and gene expression levels in both MC3T3-E1 and fibroblast cells was higher for the Col/HA coating compared with the Chi/HA coating, indicating better cellular response to the Col/HA coating.

Effects of spacer layers on magnetic properties and exchange couplings of Nd-Fe-B/Nd-Ce-Fe-B multilayer films

The influences of the spacer-layer Ta on the structures and magnetic properties of NdFeB/NdCeFeB multilayer films are investigated via DC sputtering under an Ar pressure of 1.2 Pa. An obvious （00l） texture of the hard phase is observed in each of the films, which indicates that the main phase of the film does not significantly change with Ta spacer-layer thickness. As a result, both the remanence and the saturation magnetization of the magnet first increase and then decrease, and the maximum values of 4π Mr and Hcj are 10.4 kGs （1 Gs=10^-4 T） and 15.0 kOe （1 Oe=79.5775 A·m^-1） for the film with a 2-nm-thick Ta spacer-layer, respectively, where the crystalline structures are columnar shape particles. The measured relationship between irreversible portion D （H）=-△ Mirr/2Mr and H indicates that the nucleation field of the film decreases with spacer layer thickness increasing, owing to slightly disordered grains near the interface between different magnetic layers.

Assembly and Characterization of Rare-earth-containing Polyoxometalate [Eu(P_2Mo_(17)O_(61))_2]^(17-) and Poly(allylamine hydrochloride) Multilayer Films

The ultrathin multilayer films of rare-earth-containing polyoxometalate cluster K_ 17[Eu(P_2Mo_ 17O_ 61)_2] (EuPMo) and poly(allylamine hydrochloride)(PAH) have been prepared by the Layer-by-Layer(LbL) self-assembly method. The photoluminescent behavior of the films investigated at room temperature shows the Eu 3+ characteristic emission pattern of 5D_0→ 7F_J(J=1—4). The occurrence of the photoluminescent activity confirms the potential of creating luminescent multilayer films with polyoxometalates(POMs).

Hybrid Electrochromic Multilayer Films Based on Fe(II)-Metalloviologens and TiO_2 Nanoparticles

Metallosupramolecular coordination polyelectrolyte, Fe（II）-metalloviologen（FEN）, was prepared by the reaction of Fe（II） with a novel bisterpyridine ligand. As active components, FENs could be assembled into electrochromic multilayer films with negative charged polystyrene sulfate（PSS） by the sequential deposition layer-by-layer technique. Numerous analytical instruments, such as UV-Vis spectroscopy, atomic force microscopy（AFM）, tunneling electron microscopy（TEM）, zeta-potential measurement and electrochemical measurement have been utilized to characterize their morphology, optical and electrochromic properties. It has been observed that as-prepared films exhibited multi-colour changes by triggering with different potentials. However, the low optical contrast of multilayer films would limit their further applications. In order to overcome this problem, semiconductor TiO2 nanoparticles（TiO2） were incorporated into FEN multilayers by layer-by-layer approach. By carefully optimizing the film structure, as-resulted hybrid films containing FEN, TiO2 and PSS exhibited high optical contrast, suitable response time and long-term stability. Such hybrid films should be promising candidates to meet the requirements for developing flexible displays and electrochromic devices.

Microstructure and properties of Nb/Ta multilayer films irradiated by a high current pulse electron beam

Nb/Ta multilayer films deposited on Ti6A14V substrate with Nb and Ta monolayer thicknesses of 30 nm, 120 nm, and 240 nm were irradiated by a high current pulse electron beam （HCPEB） to prepare Nb-Ta alloyed layers. The mi- crostructure and the composition of the outmost surface of melted alloyed layers were investigated using a transmission electron microscope （TEM） equipped with an X-ray energy dispersive spectrometer （EDS） attachment. The Ta content of the alloyed surface layer prepared from the monolayer of thickness 30 nm, 120 nm, and 240 nm was- 27.7 at.%, 6.37 at.%, and 0 at.%, respectively. It was found that the Ta content in the alloyed layer plays a dominant role in the microstructure of the films. The hardness and the wear rate of the alloyed layers decrease with the increasing content of Ta in the surface laver.

Multilayer Film Fabrication and Photoelectric Conversion Property of Two Pyrrolidinofullerene Carboxylic Acid Derivatives

Two multilayer films of pyrrolidinofullerene carboxylic acid derivatives, which exhibit photoelectric conversion property, are reported here. The first monolayers were fabricated on hydrophilic indium-tin-oxide (ITO), quartz, and mica by esterification reaction. The multilayers were characterized by contact angle and UV spectrum. The photoelectric conversion properties of both multilayer films were studied.

Temperature Dependence of Magnetic Properties of SmCo/FeCo Multilayer Films

Sm22Co78/Fe65Co35/Sm22Co78/Fe65Co35 multilayer films were prepared by magnetron sputtering. The temperature dependence of coercivity (Hc), remanence (Mr) and reduced remanence (Mr/Ms) has been measured. The coercivity decreases with increasing of temperature. The remanence decreases with increasing the temperature from 26 to 100℃, and then increases with continuously increasing the temperature from 100 to 150℃. The reduced remanence increases with increasing the temperature.

Effect of Co Ion Implantation on GMR of [NiFeCo(10 nm)/Ag(10 nm)]×20 Multilayer Film

The composition, phase structure and microstructure of the discontinuous multilayer film[NiFeCo（10 nm）/Ag（10 nm）]×20 were investigated after Co ion implantation and annealing at 280, 320,360 and 400℃, respectively.GMR （giant magnetoresistance） ratio of the film with/without Co ion implantation was measured. The results showed that Co ion implantation decreased the granule size of the annealed multilayer film, and increased Hc value and GMR ratio of the multilayer film. After annealing at 360℃, the multilayer film [NiFeCo（10 nm）/Ag（10 nm）]×20 with/without Co ion implantation both exhibited the highest GMR ratio of 12.4%/11% under 79.6 kA/m of applied saturation magnetic field.

Performance of the Multilayer Film for Infrared Stealth based on VO_(2) Thermochromism

With the development of detection and identification technology,infrared stealth is of great value to realize anti-reconnaissance detection of military targets.At present,infrared stealth materials generally have deficiency,such as complex structure,inconvenient radiation regulation and cumbersome preparation steps,which greatly limit the practical application of infrared stealth materials.In view of the above deficiency of infrared stealth materials,we proposed a kind of multilayer film for infrared stealth using VO2thermochromism based on the temperature response mechanism of tuna to adjust its color,and through the intelligent reversible radiation regulation mechanism to meet the infrared stealth requirements of tanks in different actual scenes.The results show that when the temperature increases from 300 K to 373 K,the peak emissivity of the film decreases from 94%to 20%in the 8-14μm band after structural optimization,which can realize the infrared stealth of the high temperature target in the 8-14μm band.The average emissivity of the multilayer film for infrared stealth at3-5μm and 8-14μm band can be reduced to 34%and 27%at 373 K,and the peak emissivity at 5-8μm band can reach 65%,realizing dual-band infrared stealth in the 3-5μm and 8-14μm bands and heat dissipation in the 5-8μm band.The multilayer film for infrared stealth based on VO2thermochromism designed by the authors can meet the characteristics of simple film structure,convenient radiation regulation and simple preparation.

Chitosan/Sodium Alginate Multilayer pH-Sensitive Films Based on Layer-by-Layer Self-Assembly for Intelligent Packaging

The abuse of plastic food packaging has brought about severe white pollution issues around the world.Developing green and sustainable biomass packaging is an effective way to solve this problem.Hence,a chitosan/sodium alginate-based multilayer film is fabricated via a layer-by-layer(LBL)self-assembly method.With the help of superior interaction between the layers,the multilayer film possesses excellent mechanical properties(with a tensile strength of 50 MPa).Besides,the film displays outstanding water retention property(blocking moisture of 97.56%)and ultraviolet blocking property.Anthocyanin is introduced into the film to detect the food quality since it is one natural plant polyphenol that is sensitive to the pH changes ranging from 1 to 13 in food when spoilage occurs.It is noted that the film is also bacteriostatic which is desired for food packaging.This study describes a simple technique for the development of advanced multifunctional and fully biodegradable food packaging film and it is a sustainable alternative to plastic packaging.

OptoGPT: A foundation model for inverse design in optical multilayer thin film structures

Optical multilayer thin film structures have been widely used in numerous photonic applications.However,existing inverse design methods have many drawbacks because they either fail to quickly adapt to different design targets,or are difficult to suit for different types of structures,e.g.,designing for different materials at each layer.These methods also cannot accommodate versatile design situations under different angles and polarizations.In addition,how to benefit practical fabrications and manufacturing has not been extensively considered yet.In this work,we introduce OptoGPT(Opto Generative Pretrained Transformer),a decoder-only transformer,to solve all these drawbacks and issues simultaneously.